Does the projects created in Final Cut Express transfer over to the new Final Cut Pro software?

Does the video projects created in Final Cut Express transfer over to the new Final Cut Pro software?

You want to go from FCE to FCP-X?
You would need to do so in multiple steps.
1) You would need to be working in a very late version of FCE.
2) Open the FCE project in FCP-7.
3) In FCP-7, export an XML of the sequence you wish to get to FCP-X.
4) Purchase the software 7toX
http://assistedediting.intelligentassistance.com/7toX/
5) Import the XML into 7toX, export the FCP-X friendly file
6) Import the converted XML into FCP-X
7) Re-link all you media
It should be noted that when you use XML, not all the things you have done in your original sequence will make it through the final translation. There is more information about this at the 7toX page linked above.
MtD

Similar Messages

  • Does the new mac book pro come with iDVD

    errrrr. So I just bought a new  OS X 10.7 .1 MacBook pro and  I can't find iDVD : ( . Does it come already installed? If not is there any free software out there that can copy and burn DVDs???

    iDVD is no longer installed when you purchase a Mac with Lion 10.7. Need to copy and burn DVD's? Use the Finder and/or Disk Utility. That's free. SimplyBurns is free.
    http://www.macupdate.com/app/mac/19778/simplyburns

  • Life of the new Retina MacBook Pro's FLASH Architecture?

    Dear all,
         How long does the new Retina MacBook Pro's flash based SSD memory last? How exactly is a "write" defined? If I'm going to be paying approximately 2K or more, I better be able to use this computer without problems for 6-8 years.
    Thanks

    SOJHA wrote:
    That's funny. I don't recall me ever typing 2004 in the description of my computer.
    You said:
    I better be able to use this computer without problems for 6-8 years.
    That means you expect to get 8 years out of a notebook computer. 2004 was 8 years ago. Apple was selling iBooks and PowerBooks back then running 10.3. This is at odds with your 2007 MacBook running the latest operating system. Obviously you do not expect to get 6-8 years from a notebook. You are faulting a brand-new machine with brand-new technologies for failing to meet requirements that have never before been imposed by you or anyone else.
    Your second sentence is completely unhelpful because "as long as all Apple notebooks last" depends much on the user.
    That is correct. If you are the type of person that uses your MacBook Pro for light web surfing, e-mail, newsletters, and as a receptical for Frappuccinos ®, then I can guarantee it won't last 8 years.
    If you use it only for its intended purposes, then it may or may not be able to run the lateset operating system in 2017. It may even need a hardware refresh to restore original performance. If you are lucky, it might last until 2020, but no reasonable person would expect that.

  • I have a newer MacBook Pro and I am trying to download my Final Cut Pro 7 Studio 2 on it. Is that possible or does the new MacBook Pro not support anything other than Final Cut Pro X?

    I have a newer MacBook Pro and I am trying to download my Final Cut Pro 7 Studio 2 on it. Is that possible or does the new MacBook Pro not support anything other than Final Cut Pro X?

    As Tom said the FCS forum is the better place to post the question.
    Here is Apple's best practices doc for installing both on the same system.
    BTW, FCP7 is part of the FCS 3 suite of apps.
    Russ

  • I need to buy final cut pro software  and i need it to support arabic writing the problem iam in germany  the  i tune here does not

    i need to buy final cut pro software  and i need it to support arabic writing the problem iam in germany  the  i tune here does not give you chance to choose the
    language

    If you want the menus and dialogues of the app to be in Arabic, that's not possible, there is no Arabic version of this software.
    If you just want to write Arabic language titles, etc., the language of the app is irrelevant, the input of different languages is handled by the OS, and Arabic input is always available.
    All Apple software is multilingual, no matter where you buy it. For example, the user interface for Final Cut Pro can be switched among English, Chinese, French, German, and Japanese.

  • Does the new version of DVDSP open iDVD6 projects????

    Does the new version of DVDSP open iDVD6 projects???
    I tried to open an iDVD project in DVDSP 4 (because I liked the iDVD template I had used for that project)...
    but I couldn't do it. If I upgrade to the latest version of DVDSP... can I do it then?
    Thanks,
    Erik Nanstiel

    You are limited to importing iDVD 3 and 4 projects with DVDSP 3 or 4. And since they didn't update DVDSP in Final Cut Studio 2, it seems this limitation will be around for a while.
    Here's the relevent Apple support article: http://docs.info.apple.com/article.html?artnum=301385

  • What does the new in Pointbase JDBC Url mean?

    what does the new in the URL mean? It is out of ServiceBus config:
    jdbc:pointbase:server://localhost:9193/weblogic_eval;new
    thanks,
    Barossa

    if the database is not exist, it will create one for you.

  • Why when I merge clips in Audition CC  does the new merge file have no data?

    Why when I merge clips in Audition CC  does the new merge file have no data?  It happens in large projects and once it starts to happen I cannot get merge clips or bounce tracks to work correctly.

    files 1 of 2 and 2 of 2 are for all these languages:
    Chinese (Simplified)
    Chinese (Traditional)
    Czech
    English
    French (Standard)
    German
    Italian
    Japanese
    Korean
    Polish
    Portuguese (Brazilian)
    Russian
    Spanish
    Swedish
    Turkish

  • What benefits does the new CMM bring to the table??

    After installing the new Colour Management Module, I now have the new option of 'Adobe CMM' as well as the old 'Adobe ACE' and 'Microsoft ICM' in Photoshop CS3 and other Adobe applications.
    What benefits does the new CMM bring to the table?? As it is new, I would expect benefits, otherwise resources would not have been wasted in creating it, but what benefits??

    anyone got any ideas why my digital (raw) images from the camera - once downloaded to computer present when viewed in explorer photo /fax viewer as the colours which they print with yet if I save the image into Photoshop elements V5 to crop, zoom, and otherwise manipulate they look EXTREMELY washed out in photoshop V5. This of course means that if I want to adjust colour, brightness etc I have to keep saving and going back to explorer photo /fax viewer to see what they REALLY will print like.

  • Final Cut pro software

    Is the Final cut Pro software for Intel based Mac out yet?
    When will it be?

    No. It is expected to be relased by the end of March, though no one can say for certain. When it arrives, it will be released as Final Cut Studio, and will include Final Cut Pro 5, Soundtrack Pro, Motion 2, and DVD Studio Pro. You can read more about it here:
    Final Cut Studio
    iMac Intel Core Duo 20", 2 GB RAM, OWC 300 GB FW HD   Mac OS X (10.4.5)   eMac 1.42GHz, 1 GB RAM; iPod w/ video 30 GB

  • HT4145 Does the new Airport Extreme allow "guest network" setup across all my Airports on my network? I have 1 Airport as a router and 6 others as WAP's (bridged)

    Does the new Airport Extreme allow "guest network" setup across all my Airports on my network? I have 1 Airport as a router and 6 others as WAP's (bridged)

    I assume that all of your WAPs are hard wired on the network.
    If.....all of your WAPs are simultaneous dual band Apple AirPort devices like an AirPort Extreme or new AirPort Express.....and.....you have firmware version 7.6.3 (now 7.6.4) installed on all the AirPorts.....and.....you use AirPort Utility 6.3.1 to configure the devices......in theory.....it should work.
    I don't have 6 WAPs, but I do have 3 and the network works perfectly allowing extension of both the "main" and "guest" network.

  • Does the new command 2 binary format work with Apple Push Notification Service? I receive an invalid response status code of 128.

    Does the new command 2 binary format work with Apple Push Notification Service? I am sending 2 messages with the same payload to 2 different devices. None of the messages display on either of the devices. It seems that at least 3 should have been displayed. For my first device, I received a response with an invalid status code of 128 and the message identifier is 2 indicating that the first message was OK. However no message was displayed on the phone. For the second device, I did not receive any error response, but no message was displayed on the device.
    Does ANS perform any validation on the message identifier? The Local and Push Notification Programmin Guide says the message identifier is:
    An arbitrary, opaque value that identifies this notification. This identifier is used for reporting errors to your server.
    I know that the device tokens are valid because the same tokens work when I use the legacy basic or enhanced formats. The phones display the messages correctly when I send to ANS using the old ANS message format.
    Here is the data and the response:
    Sent to ANS: 2 0 0 0 158 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 119 141 5 0 1 5 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 119 141 5 0 1 5
    ANS returned an error: 8 128 0 0 0 2
    Sent to ANS: 2 0 0 0 158 1 0 32 4 239 182 26 13 237 170 136 41 243 181 57 120 208 135 19 101 102 212 70 55 244 251 255 160 125 82 9 10 143 72 17 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 5 4 0 4 83 7 119 147 5 0 1 5 1 0 32 4 239 182 26 13 237 170 136 41 243 181 57 120 208 135 19 101 102 212 70 55 244 251 255 160 125 82 9 10 143 72 17 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 6 4 0 4 83 7 119 147 5 0 1 5
    ANS did not return a response.

    Hello, can you please help me ?
    You specified sample payload here:
    TerrellFromLockhart wrote:
    I finally got this to work. The picture in the Programming Guide is very confusing. The solution was to prefix every message's frame data with command 2 and that messsage's frame data length. Here is a sample:
    ANS frame: 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 4 4 0 4 83 7 199 195 5 0 1 10
    About to read response at Thu Feb 20 15:40:20 CST 2014
    SocketTimeoutException
    2 - is clearly command
    0 0 0 77 - frame length
    1 - item Id
    what's 0 32 ? According to this page https://developer.apple.com/library/ios/documentation/NetworkingInternet/Concept ual/RemoteNotificationsPG/Chapters/Commu…
    Item id  should be followed by item length. But item length is obviously greater than 32 because device token's length is 32. Can you please explain why 0 32 were used? and do you have any insight on item id meaning ?

  • Does the new 2011 iMac come with a osx lion preinstalled or a osx lion USB drive

    Does the new 2011 iMac come with a osx lion preinstalled or a osx lion USB drive

    I just bought the 17" MacBookPro the other day with Lion preinstalled and wanted to install Lion on my iMac. It makes sense that I should be able to upgrade for free you spend all this money on Apple products, give us apple supporters a break. Maybe this is something that Apple overlooked and in the future there will be a fix.
    I read up on forums and I finally called AppleCare they said that I should be able to install Lion on 5 other computers but only if purchased in the store, this doesn't make any sense. I feel like I already purchased a copy and that copy should be able to be installed on another computer. It should be as simple as logging in app store with the same apple ID and it be there to install on my iMac. If apple is trying to make everything user friendly, device syncying and convenient well it's not; this is just something they think of. I refuse to pay $30 for another copy. Fix this issue APPPLE!!!
    Because if those who bought computers in July that didn't have Lion preinstalled can obtain a free copy to install in 5 computers. I should be able to do the same with the Lion that I bought preinstalled it's just make sense to me.

  • My iPhone 3Gs is now no longer a recognised device on iTunes after I downloaded the new iTunes with iCloud software, but it does recognise my iPad2??

    My iPhone 3Gs is now no longer a recognised device on iTunes after I downloaded the new iTunes with iCloud software, but it does recognise my iPad2??
    I run both Mac and a PC and have iTunes on both, which has previously recognised my iPhone. I had updated my Mac with the new iTunes software with iCloud and updated my iPad2 just yesterday. I then wanted to do the same with my iPhone today, but my Mac wouldn't recognise the device so I tried it on my PC, which recognised the phone but told me I needed to update my iTunes and this in turn wanted to update my iPhone software. After completing all this and restarting, my iPhone now shows the iTunes icon with the USB plug pointing towards it, obviously wanting me to plug it in to my computer to re-connect with iTunes, but now neither of my computers recognise my iPhone and my PC states an 'Unknown Device'. My Mac doesn't even see it. Can anyone help as I really need to get my phone working?? Thanks

    Hold down the Home and Power button for 20 seconds. And try to update again.
    Also read and follow this:
    http://www.apple.com/support/iphone/assistant/restore/

  • Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

    Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

    You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
    If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
    If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

Maybe you are looking for