Does the QT MPEG2 upgrade allow for the use of m2t files in FCP?

I just noticed the product the Apple store - and since I'm on the way to return a Firestore FS4..... Will this upgrade allow FCP to edit m2t?

Thanks gents - I heard the same rumor today from Focus' technical support - they are waiting for the QT patch to test and issue a firmware upgrade for the Firestore units, but they didn't expect a solution until April. sigh I had hoped the upgrade was new, and this was the software they were waiting for.

Similar Messages

  • The value  is not allowed for the field Cross-plant CM

    Hello All
    When i copy material in refernce to existin gone. I am getting this message
    "The value  is not allowed for the field Cross-plant CM"
    I am not putting any thing in this Basic-view Cross-plant CM, but still getting this message.
    Any help will be good...Thanks in advance...

    Hi,
    Please check the check box in front of the field config material is checked?
    If so then this material is configurable material
    A material that can have different variants.
    For example, a car can have different paint, trim, and engines.
    Configurable materials have a super bill of material (BOM) that contains all the components for producing every variant of the material. Similarly, they have a super task list that contains all the operations. When a material is configured, only the components and operations needed for a variant are selected.
    Please check
    BR
    Diwakar

  • Can the next version please allow for the line height to be zero in a text box? I can only go down to .01?

    I want to create a flipping calendar. I had this brilliant idea of putting each date 01 02 03, etc in one text box, with a hard return in between, and then set the line height to zero. Then set the type to appear one paragraph at a time. It would eliminate 20 animation steps. It worked beautifully except that I can't get the line height to set to zero. It will only go to .01. Bleh!
    So please, Can the next version allow for the line height to be zero in a text box?
    Also, separate timelines would be nice instead of one long string so it would be easier to have more than one animation happening at once.
    Just a thought.
    PS - I also noticed it would be nice to have the option of having the first line in a text box dissappear or dissolve or flip out before the next one comes in, rather than just each building in on top of each other.

    In these forums you are just talking to users, not developers. To provide your feedback, in Keynote go to Keynote Menu>Provide Keynote Feedback and send your request that way.

  • What happened to the 8800 GT upgrade cards for the first-gen Mac Pro?

    I have a first-gen Mac Pro (System Profiler says model identifier is "MacPro2,1" which I think still makes it a first-gen model), and I was considering upgrading to the 8800 GT so I could take advantage of OpenCL, since the 7300 GT I have is not supported, according to Apple's page. ( http://www.apple.com/macosx/specs.html )
    However, I can't seem to find the card anywhere on Apple's store site, or anywhere else, for that matter. Does anyone know what happened? Can I still buy the 8800 GT for my Mac Pro? If not, what OpenCL-compatible card can I upgrade to? Apple only seems to have the ATI X1900 XT in their store.
    Thanks in advance for any advice!

    {quote:title=Malcolm Rayfield wrote:}
    ATI Radeon HD 4870 (Despite what Apple says, it works in any Mac Pro.)
    <http://store.apple.com/us/product/MB999ZM/A?fnode=MTY1NDA5OQ&mco=NDE4NDMxOA>
    Have you done it, or know someone that has put it in a 1st gen Mac Pro?
    I'm just double checking so I don't waste my time.
    Message was edited by: JeffDM2

  • Upgrade status for the current version: Outdated for

    Hello,
    we are running solution manager 7 EHP1 sps22.
    this system has been recently upgraded to this version.
    now before running solman_setup i tried to log into the /smd - solution
    manager diagnostics i got the following messages -
    "Upgrade status for the current version is outdated. Please upgrade now""Maintenance mode is enabled. Some applications will be disabled or might
    not work"
    i couldn't change the maintenence mode to disabled mode - since there isno agaent administration in the regular path - Diagnostics
    Administration-Managed SystemsAgent Administration.
    as a result i can't goto Diagnostics Setup-----Diagnostics
    System--Advance setup and start the upgrader - i'm getting the followingerror message - Upgrade status for the current version: Outdated for
    this version .
    LM-Service is in patch 06 - latest release asa far as i know.

    you are running into the same error like in your other thread.
    please avoid double postings
    see SAP Note #1273028
    Known problems in all Releases 80
    The bytecode instrumentation agent 8.0 cannot be used for Solution Manager self-monitoring. Please use Java agent version 7.2 for self monitoring of the Solution Manager Java stack. Otherwise Setup for Introscope Agents fails with
    java.lang.NoSuchMethodError: com.wily.isengard.api.TransportConfiguration.<init>(IZZ)V ...

  • Value Misc. Allowance for the flexfield segment Expense Type does not exist

    Dear All,
    can any budy help me out in Internet Expense modulee
    Error:- Value Misc. Allowance for the flexfield segment Expense Type does not exist in the value set OIE_EXPENSE_TYPES.
    Problem details:- we have define one expense templates " Relocation Expnse" under this we have define number of expense items ,in which Misc. Allowance is one
    Prevously it was end dated but now end date is removed , now when we are trying to claim expense against this item we are getting the above error.
    can you please tell me why this is happining and what is the solution.
    Regard
    Ajay Sharma

    Check these things
    1. you have enable PerPeriodOfService DFF to this set.
    2. you are setting Context Variable like (AttributeCategory) with requried value.
    Thanks

  • HT1535 Does iTunes 11 allow for the "dragging" and "dropping" of music from a library onto a manually managed device?

    It appears that iTunes 11 does not allow for the "dragging" and "dropping" of music from a library onto a manually managed device.. is that true? I am trying to drag a playlist onto my iPhone. I've done it many times before on previous versions of iTunes but now that the menu is up in the heading, I can't drag the playlist onto the icon for my iPhone.

    Zmaj3 wrote:
    It appears that iTunes 11 does not allow for the "dragging" and "dropping" of music from a library onto a manually managed device.. is that true?
    No.
    Sync you are not syncing, the ONLY way to get items onto a manually managed device is to drag and drop.
    However, I feel a much simpler way is to create a playlist and add/remove songs from this playlist and autosync this playlist (or multiple playlists). I use about 6 or 7 playlists
    You can still also drag & drop songs while autosycning.

  • Okay I use iPhoto 6 on an older mac and don't want to upgrade past 10.4.11. Can I upgrade iPhoto without the newer operating system? For the life of me I can't get iPhoto to recognize my camera reliably - although it does sometimes. Any advice, help?

    Okay I use iPhoto 6 on an older mac and don't want to upgrade past 10.4.11. Can I upgrade iPhoto without the newer operating system? For the life of me I can't get iPhoto to recognize my camera reliably - although it does sometimes. Any advice, help?

    The latest version of iPhoto which can operation with OS X 10.4.11 is iPhoto 7 which is part of iLife 08.  You might be able to find a copy of iLIfe 08 on Amazon.com or Ebay.com.
    iLife 08's full system requirements are:
    Mac computer with an Intel, PowerPC G5, or PowerPC G4 processor
    iMovie ’08 requires a Mac computer with an Intel processor, a Power Mac G5 (dual 2.0 GHz or faster), or an iMac G5 (1.9 GHz or faster)
    iDVD ’08 requires 733MHz or faster processor
    512 MB of RAM; 1 GB recommended; high-definition video requires at least 1 GB of RAM
    3 GB of available disk space
    DVD drive required for installation
    From: http://support.apple.com/kb/HT1010
    OT

  • Garageband - does it allow for the use of software like "ILIO Origins for EXS/GIGA?"

    I am completely new to the modern world of iOS (just bought a Apple iMac ME089LL/A 27-Inch Desktop), and Garageband, and recording music and such. I've watched enough tutorials now to know that Garageband has virtual instrument libraries. I want to know if Garageband will allow for the use of more sophisticated sounds, specifically those in the ILIO Origins for EXS/GIGA

    I am also baffled. I tried to find this "default Captivate quiz" in the help section of Captivate with no results. When I again contacted the representative, he closed the conversation before speaking with me.
    Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 0 minute(s) and 4 second(s) or longer as there are 1 customer(s) in line ahead of you.
    You are now chatting with 'Khyati'
    Thank you for chatting with us. Please click the "Close" button on the top right of the chat window to tell us how we did today.
    I have posted the entire correspondence on Adobe Captivate's Facebook page in the hopes that I might get some swift assistance from the company.

  • Error (Data mining): The specified mining structure does not contain a valid model for the current task.

    I'm trying to run the Cross validation report on a mining structure that contains just Microsoft Association Rules mining model. In Target Attribute, I've tried:
    Actual(Service Description).SE value
    Actual([Service Description]).[SE value]
    Actual(Service Description)
    Actual([Service Description])
    just because i don't know what is the exact correct format, but none of them worked, and I always get the following error:
    Error (Data mining): The specified mining structure does not contain a valid model for the current task.
    the following is my mining model structure

    Association rules does not allow for cross-validation
    Mark Tabladillo PhD (MVP, SAS Expert; MCT, MCITP, MCAD .NET) http://www.marktab.net

  • Some of my earliest photos are not showing on my phone after updating to iOS7. They can be seen in the app "over" which allows for art and lettering to be placed on a photo but I can not find an album for photos before 2012.

    Some of my earliest photos are not showing on my phone5 after updating to iOS7. They can be seen in the app "over" which allows for art and lettering to be placed on a photo but I cannot find an album or year for photos before 2012 (in the photo app). The iphone says the photo content is there when I check in "about" under general in settings. So the pictures seem to be somewhere but I just can't access from from the photo app. Any suggestions. I also know that they were there before the iOS7 upgrade as I was looking for a pre 2012 picture last week and it we there.

    Some of my earliest photos are not showing on my phone5 after updating to iOS7. They can be seen in the app "over" which allows for art and lettering to be placed on a photo but I cannot find an album or year for photos before 2012 (in the photo app). The iphone says the photo content is there when I check in "about" under general in settings. So the pictures seem to be somewhere but I just can't access from from the photo app. Any suggestions. I also know that they were there before the iOS7 upgrade as I was looking for a pre 2012 picture last week and it we there.

  • No updates allowed for the document "......."  IDOC "........"

    When trying to access a sales order in change mode... I receive the following error message:
    No updates allowed for the document "......."  IDOC "........"
    I checked IDOC status in WE02 and found that the Application Document was not posted and status is 51.  Next to the status of the IDOC "purchase requisition does not exist"
    Please Advise..
    Thanks
    Nick

    double click the message and tell the message number

  • The value 1 is not allowed for the field variace key

    Hi experts,
               When i was creating material master i was getting the status message as "the value 1 is not allowed for the field variance key" , but its stopping there its not moving out of that screen and creating the material record. When i see this field in the material master configuration its an optional field. Can you give me suggestions, where it can go wrong.
    Thanks & Regards,
    Ravi.

    Hi
    Can u tell me the field name . I cant get that field ref key. In which view does it come.
    Reg
    Raja

  • Inspection RR should be allowed for the operation confirmed qty only

    Hi  Friends
    I have one requirement , Inspection results recording should be allowed for the operation confirmed qty only
    i.e
        1. Release Production Order for 100 qty
        2. Inspection Lot created for 100 qty
        3. Production Confirmation done for 1st operation for 50 qty
        4. Next operation is testing or Quality inspection
        5. Used 03 insp type(WIP inspection)
        6. Result Recording should be allowed only for 50 Qty
        7. If i go for 51, system should give message(i.e confirmation not done for 51)
        8. Usage decision saved for 50 qty, Remaining 50 qty,we have to do separate RR & UD once confirmation done
    Please let me know the settings,
    Thanks & Regards
    Gajendranath

    Hello Gajendra
    Please find my inputs
    1) PLease activate in OPK4 for the production order type these 3 setting
    a) Operation sequence :  Error when operation sequence is not followed
    b) Overdelivery : Error when overdelivery tolerance is exceeded
    c) Results Rec. (QM) : Error message if no insp. result exists
    by doing this a) you make the sequence of operation mandatory. no body can confirm operation no 30 without confirming 10 & 20
    b) if you have confirmed 50 in the first operation, you cannot confirm more than 50 in second operation
    c) it will not allow you to confirm through C011n if the result recording is not done
    2) Kindly understand for 03 inspection the lot quantity will be of 100 (PO quantity as in your case). so it is impossible to give UD for 50 quantity and then do the UD for the rest of the quantity.
    UD is for the lot and not for the confirmed quantity. And please note for 03 inspection confirmation holds the importance rather than the UD
    So use 03 for intend of its use
    Regards
    Gajesh

  • Why is the a505 series not compatible for the windows 10 upgrade

    Why is the a505 series not compatible for the windows 10 upgrade. It does not show up in the system available for the upgrade.

    Nobody said that it wasn't compatible. Microsoft makes that determination.  Toshiba, however, has chosen not to write new utilities and drivers for it for Windows 10.

Maybe you are looking for