Does the radio accessory work with other iPods or with iPhone?

Does the radio accessory work for the ipod nano with other iPods or with iPhone?

Are you talking about the built in Radio on the Nano? If so, the answer is no.

Similar Messages

  • HT5470 I can't get the radio to work on my Ipod Nano 7.

    I can't get the radio to work on Ipod nano 7.  When I go to the radio screen the following happens 1) the radio screen appears in the backgound with a small rotating icon at its center for few seconds, 2) the screen go blank and small apple icon appears at the center of the blank screen for few seconds, and 3) the home screen reappears. Any suggestions?

    Thanks for the reply.  It turns out my ipod nano was defective.  For some reason it rebooted every time the radio button was pressed.  I tried a software restore and that failed.  Since the unit was just a few days old I was able to exchange it at the retailer.  The FM radio on the new unit works great.

  • Why does the Wi-Fi work on my iPod  and not my Macbook?

    The router is an arms length away and my Ipod#4 works great. but I cannot get my Macbook to get connected. Whats up?

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • TS3474 How do I get the radio to work on my iPod nano 6th gen?

    I have synched my Nano & have music...I have plugged in the earphones, but nothing happens with the radio. I've read the support article about the FM radio, but I don't have any of the radio controls shown in the article--all I have is the radio icon and the Now Playing icon, and when I tap the Now Playing icon, it shows what music is playing, not radio controls. Help!

    As mentioned above, the reason is that the FM radio uses the headphone cable as an aerial, so the phone insists on it being connected. It's the same with other Nokias. Apparently there are complicated technical reasons why the FM radio can't use the same antenna as the phone signal.

  • Why does the audio books not grouped on ipod unlike on iphone?

    I had transferred my audio books on my ipod classic (which used to be on my iphone).  When I was about to listen to it, the audio books are listed on the ipod per tracks not by book.  Why does apple cannot make the ipod OS handle the audio books like the iphone OS?

    Manage your Apple ID

  • Does the dock from a fourth generation ipod shuffle work with a second generation ipod shuffle?

    Does the dock from a fourth generation ipod shuffle work with a second generation ipod shuffle?

    No, they are different.  If you look at the replacement part for the 4th gen shuffle's USB cable
    http://store.apple.com/us/product/MC003ZM/A
    it says it's only for the 3rd and 4th gen shuffle.

  • DOES THE APPLE REMOTE WORK WITH THE IPOD TOUCH..? WITHOUT A DOCK..

    HI
    DOES THE APPLE REMOTE WORK WITH THE IPOD TOUCH 5TH GEN..? WHITHOUT A DOCK..??
    THANKS ANYONE

    This Apple remote requires a dock since this remote uses IR and the iPod does not ha IR capibility,.
    Manufacturer Information
    Apple Remote with iPod and iPhone: Please note a Universal Dock is required in order to use the Apple Remote with your iPhone or iPod.
    http://store.apple.com/us/product/MC377LL/A/apple-remote?

  • Does the apple remote work with the ipod touch 4th gen?

    Does the apple remote work with the ipod touch 4th gen?

    Yes, but it also requires Apple's Universal Dock to go along with it.  Otherwise, it is useles.
    B-rock

  • FM Transmitter used to work fine but stopped working, bought 2 new ones and neither work, they work with other Ipods in the house, IPOD Usb syncs fine with Computer, why won't it work with the FM transmitters anymore?

    FM Transmitter used to work fine but stopped working, bought 2 new ones and neither work, they work with other Ipods in the house, IPOD Usb syncs fine with Computer, why won't it work with the FM transmitters anymore?

    Are the other iPods models, same version as yours. The 2 New FM Tx may need a new iPod software, which you can update via iTunes.
    Good Luck!

  • For the iPod Classic, in settings, how does the volume limit work? After setting a limit, how to re-set to a new volume limit?

    For the iPod Classic, in settings, how does the volume limit work? After setting a limit, how to re-set to a new volume limit?

    This thread - with a quote from an LR4 Beta thread - says that all 6 central Basic controls in PV2012 (Exposure thru Blacks) are now image-adaptive, as were Recovery, Fill Light, and Clarity in previous versions:
    http://forums.adobe.com/message/4253485
    Whether they are suitable for creating a Timelapse sequence without significant flicker is entirely subjective and up to you - and of course, dependant on your specific images & how they change over time.  Sorry, not much advice beyond try PV2012, and revert back to PV2010 if you get too much flicker.

  • Does the new iPad work with adobe flash?

    Does the new Ipad work with a version of adobe flash?  I have read several articles, and I'm just more confused than when I started!  I'm a newer Mac user, and I'm interested in the new iPad, but I don't know if I want it if it doesn't support internet pages that use adobe flash.  Thanks for your help!!

    Adobe eliminated its "mobile Flash" department.  Android, Mobile Windows, IOS, WebOS ... everyone is out of luck.

  • Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

    Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

    c.pfaffenbichler wrote:
    Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
    And what kept you from posting a screenshot?
    I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos.  You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
    It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image.  I've uploaded it at the size it was supplied to me at (about 2700 pixels wide).  So
    Click to open the full image, right click and copy, and paste into Photoshop.
    Select the clone tool, and set its blend mode to Darken.
    Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
    Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
    It works even better if you clone on a new layer also set to Darken.  No masking, just Photoshop blend mode magic.
    You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
    Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

  • I am going to japan with an Ipod nano and Iphone 4. Do I need a converter? or does the one the iphone comes with that plugs into the wall enough?

    I am going to japan with an Ipod nano and Iphone 4. Do I need a converter? or does the one the iphone comes with that plugs into the wall enough? I know i wont need an adapter because it will fit into the wall outlet, but voltage wise, will i need a converter? Japan runs on 100 V. I am so confused on all of this...

    As long as the adapter is 2 pronged, then you should be able to use it without any problems.
    B-rock

  • Does the amount of gigabits for an ipod touch have to do with how well it runs?

    does the amount of gigabits, for an ipod touch, have to do with how well it runs?

    Only when you have very little storage available, like less than 1/2 GB or so.

  • Does the bluetooth function work with the scanner function on my Photosmart C5550?

    I have a new Dell computer and an HP Photosmart C5550.  I use bluetooth to connect to the print. The printer function works correctly but the computer does not recognize the scanner function. Does the scanner function work with bluetooth?
    This question was solved.
    View Solution.

    Sorry. I hit post before I could elaborate. Not sure what I was thinking. The Bluetooth connection will only support printing. To use the scan feature you will need to connect the printer using a USB or network connection. Hope that explains it a bit better.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Maybe you are looking for