Does the RCA OUTPUT ON THE cdx-gt56ui run both sub and preout? if so how do I switch it to PRE-OUT

Does the RCA OUTPUT on the CDX-GT56UI Car Stereo have both Sub and PRE-OUT? if so how do I switch to PRE-OUT?

Hello Richard,
The unit has 2-channel Preamp Outputs  on the rear of the receiver, used for connecting external amps. This unit doesn't have Sub Preamp Outputs.
The rear preamp outputs can be set in the menu to output a full range signal to the rear channels, or a filtered signal to a subwoofer. When set to subwoofer, the output typically has a selectable low-pass filter and is non-fading. You can change the rear preamp outputs by selecting REAR/SUB option under Setup menu of the unit.
If my post answers your question, please mark it as "Accepted Solution".
Thank you for your post.

Similar Messages

  • Does the HDMI cable carry both video and audio? U

    Does the HDMI cable carry both video and audio?
    If so what is the purpose of the separate optical audio connection?
    Just a little confusion setting the Apple TV Up with my AV receiver.
    TIA.

    You would use both HDMI and optical by connecting the former to a TV and the latter to a receiver that doesn't have an HDMI input so that you could play the audio through your stereo system.
    You can use the HDMI alone, typically directly to the TV or through an A/V receiver, as HDMI does carry both video and sound.
    For the year prior to the disastrous 4.4 updates a couple of weeks ago, you could use optical alone to add AirPlay music capabilities to your stereo system, so that you could stream music from iTunes and devices like the Touch and iPhone to your stereo. The 4.4 update broke that capability, requiring the use of HDMI for no reason. Lots and lots of people have been complaining about that bug, as it effectively bricks the Apple TV for anyone who bought it for this purpose but can't use the HDMI connection.

  • How does the URL of DataSocket constitute?And how to use it in LabWindows/CVI ?

    Hi ！
    There's a problem puzzled me some days.How does the URL of DataSocket constitute ? And how to use it in LabWindow/CVI ?
    For example.I have downloaded a code in http://zone.ni.com/devzone/cda/epd/p/id/3787.I want to make it work properly.So I configure my DataSocket Server Manger according to the URL of this statement.
    DS_Open ("dstp://weather.natinst.com/weather/current",
    DSConst_ReadAutoUpdate, DSCurrentCallback, NULL,
    &dsCurrentHandle);
     My DateSockket Server Manger is configured as:
    However,it could not work properly when I debug it.
    There's a introduction at the top of the code."You may need to replace the references to weather.natinst.com to 130.164.140.10 if the DNS isn't working properly."So,I modified the statement into
    DS_Open ("dstp://130.164.140.10/weather/current",
    DSConst_ReadAutoUpdate, DSCurrentCallback, NULL,
    &dsCurrentHandle);
    but,it did work properly.
    We want to communicate with other computers via the URL of  DataSocket in LabWindows/CVI.Whereas,how could we make it ia the URL ?
    If anyone could help me solve this problem,I would appreciate it very much !
    Best regards.
                     xiepei
    I wouldn't care success or failure,for I will only struggle ahead as long as I have been destined to the distance.

    Hi !
    Thank you very much for your reply! I will accept your advice.
    Besides,I have another question.If I want to visit other computers or other websites，how does the URL of DataSocket  I constitute ? Does the URL has any relation with the DataSocket Server Manger ？If does,how to configure the DataSocket Server Manager to let them connected.If they have no relation,how to use the DataSocket Server Manger ?
    After all,I want to know how to use it in LabWinows/CVI ？
    Thank you very much !
    Best regards!
    I wouldn't care success or failure,for I will only struggle ahead as long as I have been destined to the distance.

  • Got my daughter an ipod touch 4th and it wont dothe back up from itunes? I bought my other daughter an iphone 4 and its doing the same thing. Both are locking up itunes too.

    Got my daughter an ipod touch 4th and it wont dothe back up from itunes? I bought my other daughter an iphone 4 and its doing the same thing. Both are locking up itunes too. I tried the deactivate/activate that was suggested it still didnt work. I took the ipod to a friend and hooked to her laptop and it synced fine but now trying to sync on mine it wont do it and it has the backup encryption on but no passwords will unlock it. itunes will reccognize the ipod and the iphone but while going thru the sync steps they both get to step 2 then lock up itunes and then says its syncing but will never stop. I am very frustrated and am regretting buying products from Apple.

    It seems to be a glitch or bug. Its been officially acknowledged and addressed by Apple. There is no resolution other than waiting for a few days.   The Kb article by Apple states it will fix itself on January 7.
    http://support.apple.com/kb/TS4510
    Symptoms
    After January 1st, 2013, Do Not Disturb mode stays on past its scheduled end time.
    Resolution
    Do Not Disturb scheduling feature will resume normal functionality after January 7, 2013. Before this date, you should manually turn the Do Not Disturb feature on or off.
    To turn off the scheduling feature, tap Settings > Notifications > Do Not Disturb and switch Scheduled to Off.

  • Vista x64, Dell Laptop Lately I have been getting audio ads from Lysol etc which I can stop by deleting the process plug-in container Iknow how to delete this process but why does the audio ad run despite the application of two well known antivirus progs?

    Vista x64, Dell Laptop Lately I have been getting audio ads from Lysol etc which I can stop by deleting the process plug-in container Iknow how to delete this process but why does the audio ad run despite the application of two well known antivirus progs?

    Oh, PLEASE IGNORE the line:
    deleted everything under HKLM\SYSTEM\CurrentControlSet\Enum\Root\SYSTEM (folders 0000 to 0004)
    That was left there inadvertedly. Can't seem to find the edit button here...

  • Does the MacBook keyboard come in Arabic and English

    Does the MacBook keyboard come in Arabic and English

    You have already asked this twice, please read the answers already provided and do not post again.
    https://discussions.apple.com/message/18239634#18239634
    https://discussions.apple.com/message/18239525#18239525

  • Why does the update change my home page and make Google so prevelant?

    Several of the last "updates" involved the changing of my bookmarks and home page,. The so called update required me to spend more time in refreshing the browser to its previous condition. This is frustrating to say the least. Second why does the updated version of of firefox seem to favor google?

    Normally, an update does not change your home page...
    What did you home page change to? That might help identify the source of the problem.
    I assume you have tried changing your home page back to your preferred site, either in the Options dialog or using one of the other methods:
    * [[Startup, home page and download settings]]
    * [[How to set the home page]]
    Did that work at all? By "at all" I mean:
    * Immediately after making the change, if you click the Home button, or launch a new window using Ctrl+n, does your preferred page load? Or is that ignored?
    * Does the setting revert later in your session (you see in Options it has changed)?
    * Does the setting revert after you exit and start Firefox up again?
    * Is the problem only when you use your Firefox desktop shortcut?
    With that information, it will be easier to recommend a solution.
    I'm not sure I understand your second question. Google has always been the default search provider in Firefox. Are you seeing even more Google than that?

  • Why does the itunes cloud only show sometimes and what does it do?

    Why does the itunes cloud only show sometimes and what does it do?

    Hi there tettyuk,
    You may find the information in the article below helpful.
    iTunes Match: Understanding the iCloud Status icons
    http://support.apple.com/kb/ts4124
    -Griff W.

  • Components Quantity Increased while doing the costing second run in 2011

    Hi,
    While doing the second costing run in same year (2011), we found there was a change in components quantity (increased) and this is not exaptable / wrong.
    dispite the fact that we did not make any change in the BOM of this SKU between the two calculations and there is no cost lot changes. There is no Price change also.
    Can any one explain, What are all the possibilities to increase the component quantities.
    Thanks in Advance
    Regards,
    Kumar

    Hi Kumar
    Check if there is % Consumption scrap in material master data and BOM item.
    I believe this is the only way you can increase consumption without changing the quantities in BOM.
    Regards.

  • Hello, my MacBook just fell on the floor and there is a massive smash on the rear aluminum part. Is it fixable? Does the warranty cover this type of damage? If not, how much would it cost me to get it fixed?

    Hello, my MacBook just fell on the floor and there is a massive smash on the rear aluminum part. Is it fixable? Does the warranty cover this type of damage? If not, how much would it cost me to get it fixed?
    PS: I bought it on the USA, but currently living in Brazil . I guess though there is a apple store in the shopping mall.

    Accidental damage is not covered by warranty. As to cost to fix, we can not say as we do not know what internal/external components were damaged. Take the computer to an authorized repair center for assessment and estimate to repair.

  • Why does the macbook pro use both types of storage?

    Why does the 13inch retina have both the 8gb hardrive and the flashdrive?

    Oops reading your question again, I see there is a misunderstanding:
    http://www.apple.com/macbook-pro/specs-retina/
    The 8GB is not hard drive memory.  It is chip memory just for multi-tasking purposes, and it can be custom configured to 16 GB of multi-tasking memory.  If you wanted to store applications or data files on it, you can create a RAM disk, but it actually would be copying the information off the SSD.  There is no "permanent" storage of data on the 8GB or 16GB of RAM.
    There is no platter hard drive anymore.
    The 128 GB is the SSD memory on the 13" model by default, and can be custom configured to 512GB of SSD memory.
    The odd thing is your SSD can do swap file storage for multitasking, but also doubles as your place to store actual data files.
    For awhile Apple mixed both platter and SSD.  Looks like that is no longer the case at least with the 13" Retina.
    SSD memory is comparable to hard drive memory in that it is more "permanent" storage after reboot.  Calling it permanent is a misnomer though, since hard drives and SSDs can both fail without any warning, and a backup is always recommended:
    https://discussions.apple.com/docs/DOC-1992

  • Why does the Date Created metadata change when images are exported?How do I stop it from changing?

    why does the Date Created metadata change when images are exported?  How do I stop it from changing? I must have a prefernce set up wrong.

    I don't know what OS you are using, or what application you are using to view the data about your exported files, but on Windows and using Windows Explorer the "Date Created" field relates only to the date that the exported file was created, i.e. if viewed immediately after export it will show the date created as being the same date. In order to view "Capture Date" in something like Explorer, you first have to ensure you have included the Metadata as Conrad outlined above, then you have to adjust the display properties of Explorer to show the "Date Taken" field. Here is an example, part of a folder I exported back on March 3rd, note the difference between that last two dates:

  • Does the series Crash come to iTunes and Apple TV?

    Does the series Crash come to iTunes and Apple TV?

    Sorry, but we're all just your fellow users here and have no better idea of if or when any given show might become available in the iTunes Store than you do. We'll all just have to wait and see. You can suggest it here:
    http://www.apple.com/feedback/itunes.html
    but it will be up to Starz to decide whether to license the show to the iTunes Store.

  • Does the SCCM updates manager use OpenSSL, and is it vulnerable to the Heartbleed bug?

    I'm 99.99% positive I know the answer, but my boss wants to know for SURE. Does the SCCM updates manager use OpenSSL, and is it vulnerable to the Heartbleed bug?
    Thank you for appeasing him.

    I must be misunderstanding something here. Would you please help me understand why this isn't answerable here? How does this have anything to do w/ our TAM? SCCM is SCCM regardless of where we got it, right? I'm quite perplexed, so thank you for
    clearing this up.
    My guess is liability. What if we're wrong? Very few people who frequent these forums are actual Microsoft employees.
    If you want a 'for sure' answer, you're best off contacting Microsoft directly IMHO.
    Don't retire TechNet! -
    (Don't give up yet - 12,830+ strong and growing)

  • Does the student teacher edition of photoshop and premiere elements 13 have to be renewed yearly?

    Does the student teacher edition of photoshop and premiere elements 13 have to be renewed yearly?

    that depends whether you were using the subscription cc version or the perpetual license version.
    if you can open, for example,  pse, click help and if you see activate/deactivate you have the perpetual license version and do not need to renew.  if you see sign in/sign out, you have the subscription version and will need to maintain your subscription to continue to use your cc program(s).

Maybe you are looking for

  • Dynamic Image Issue url:{concat(../DIR_ID2,'/',Filename_ID357)} command

    Hello. I'am actually using dynamic images depending of a filename and directory. This is working fine. My problem is that my dummy image have a form (is in horizontal) and the dinamic images that i want to import to my template have multiple forms, i

  • Dual monitor profile problem

    Macbook pro 4,1 , epson 4800, Dell 24" wide gamut display and I'm having the exact same problems as this 3 year old thread!!! https://discussions.apple.com/message/7289716#7289716 Can't print using profiles as wrong profile gets applied. This all hap

  • HTMLbeforeForm= SCRIPT LANGUAGE="JavaScript" window.opener = top; /SCRIPT

    I've found this line of code in my formsweb.cfg file, but to be honest I have no clue what it's doing. HTMLbeforeForm=<SCRIPT LANGUAGE="JavaScript">window.opener = top;</SCRIPT> Anyone know what this code might be responsible for?

  • Is there a way to immediately abort a timed loop

    Im writing a program that when completed, could run for a very very long time. But I need a timed loop to execute every 60 secs. The two option I have come up with are these 1. Timed Loop executing every minute 2. Timed Loop executing every second, b

  • N80 - Cannot Download and Install

    My N80 with software version, V4.0623.0.41 and I am having troubles downloading and installing apps on the phone. I can browse using the phone browser click on the link to download - I get the msg to DOWNLOAD and Install - click yes - continue with t