Does the route list gets reset when adding route pattern in version 9 of CUCM?

Hi All,
I created a new route pattern in call manager version 9 and then associated it to an existing route list. But when I was trying to save the route pattern. I was prompted with the message saying " Any updates to this Route Pattern automatically resets the associated gateway or Route List"
I was not able to see this message on CUCM version 8.6 however on CUCM version 9 it is there.
Does that mean that the route list/gateway will be reset and the existing calls will be dropped?
Or is it a bug?
A response will be greatly appreciated.
Thanks

Hi Farhad,
It does pop up when we modify the Route Pattern in CUCM 8.6 too.
If you asociate the GW/Trunk directly to Route Pattern, yes, it will reset them and calls will be interrupted. To avoid that, we need to associate the Route List to Route Patterns.
//Suresh
Please rate all the useful posts.

Similar Messages

Where does the ask permission get sent when a child is trying to download an app?

I Purchase a app for family sharing and when my son tries to download it he gets a "ask parent for permission", he clicks the link, but I never see the request to allow the download. Is there a special place I need to go to accept his requests?

Greetings Turbo68,
It sounds as if you are using Family Sharing and your son is part of your family group, and you have "Ask to buy" enabled for him, is that correct?
This article tells you how to allow or decline a download or purchase for your son -
Request and make purchases with Ask to Buy - Apple Support
In particular see the section titled Make or decline a purchase.
It is important to note that "If a family member downloads a previous purchase again, downloads a shared purchase, installs an update, or uses a redemption code in the store, the organizer won't get a notification."
Thanks for using Apple Support Communities.
Be well,
Brett L

How does the S_NQ_AACT table gets written when working with Usage Tracking?

Hi,
We want to monitor the performance of each subject area so we have implemented the Usage Tracking.
We have followed the steps mentioned on the link http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/usage_tracking/usage_tracking.htm
But now the table S_NQ_ACCT is not getting written, whenever any user logs into OBIEE and runs a request his entry is not logged into that table.
Anybody has encountered such a type of issue help would be appreciated.
Regards,
Apoorv

The part of NQSConfig,ini goes like this:
[ USAGE_TRACKING ]
ENABLE = YES; //DEFAULT: NO
//==============================================================================
// Parameters used for writing data to a flat file (i.e. DIRECT_INSERT = NO).
STORAGE_DIRECTORY = "<full directory path>";
CHECKPOINT_INTERVAL_MINUTES = 5;
FILE_ROLLOVER_INTERVAL_MINUTES = 30;
CODE_PAGE = "ANSI"; // ANSI, UTF8, 1252, etc.
//==============================================================================
DIRECT_INSERT = YES;
//==============================================================================
// Parameters used for inserting data into a table (i.e. DIRECT_INSERT = YES).
PHYSICAL_TABLE_NAME = "OBI Usage Tracking"."Catalog"."dbo"."S_NQ_ACCT" ; // "<Database>"."<Catalog>"."<Schema>"."<Table>" ; // Or "<Database>"."<Schema>"."<Table>" ;
CONNECTION_POOL = "OBI Usage Tracking"."Usage Tracking Writer Connection Pool" ;
BUFFER_SIZE = 10 MB ;
BUFFER_TIME_LIMIT_SECONDS = 5 ;
NUM_INSERT_THREADS = 5 ;
MAX_INSERTS_PER_TRANSACTION = 1 ;
//==============================================================================
The User has the previleges to write to the table, I am not sure where I have gone wrong?
Regards,
Apoorv

How long does the 'registration in progress' taken when adding an AppleCare policy?

Anybody know?

If you have Registered your product @ > AppleCare Agreement Registration Step 1
keep checking @ > Check Your Service and Support Coverage
then if after 24hrs it is not showing up @ > Contact Apple Support

Does the app data get saved when you trasfer purchases

can anybody help?

Are you sure about that?
I formatted my hd and I don't have a backup and I don't want to lose my data from my iPad or iPhone.

Why does the IPhone 4 get really hot, when you are making a phone call??

I can't seem to find the answer to this riddle . why does the iPhone 4 get really hot when you are making phone calls or when using face Time ??

It doesn't.
There must be an issue with your iphone.
Have you tried reset? Restore?
Have you made an appointment at the genius bar to have them look at it?

When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder?

When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder? The endless scrolling technique is far too tedious when trying to add a new bookmark, because the window is simply too tiny. Is there maybe a plug-in that will let me grab the corner of that window and re-size it? Thanks!

I suggest you install the "Add Bookmark to Here2" extension, then you can expand the the list but you will not see the bookmark itself in the list if that is what you wanted. At the top you have three major folders you can select one of them and scroll up and down. Below that you have your most recently used folders and you can select one of them instead and scroll up and down. You can see the folder the bookmark is in -- they get added to the bottom
If you really want to see the bookmark within the folder the same extension allows you to bring the bookmark to the folder from say the bookmarks sidebar that is why it is named as such. I use it but mainly i use the dialog.
Please continue reading about bookmarks and some related extensions at
* http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
* https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/
* http://dmcritchie.mvps.org/firefox/firefox.htm#addbookmarkhere2
* http://dmcritchie.mvps.org/firefox/kws.htm
If you are not using tags at all, you can remove a whole lot of confusion by removing them from the dialog via the extension.

HT1491 Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

Hi Velvalee,
While there may not be specific information about that error, here is an article of steps for troubleshooting connectivity issues with the iTunes store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
If that article does not help, there is a link near the bottom for an additional article of advanced troubleshooting.
Cheers!
- Ari

When and how does the message context get removed from the message when we use pass thru send port

Friends,
i have a doubt regarding message context.
Assume i have used XMLRecieve pipeline in the receive side to receive the message so that the message context is created. I.e properties are promoted/written.
now if we use pass thru transmit pipe line at send side, how and when does the message context get removed from the message?? Since pass thru does not have any stages/components, how does the message context removed and sent out a pure message to destination???
i mean what exactly happens here to remove the context??
Ravindar

Thanks for the reply.
"The Context is created by the Adapter, regardless of any Pipeline or Pipeline Component. It has nothing to do with PassThrough vs. XmlReceive, although XmlReceive will write Promoted Properties to the existing Context,
as can any other Component."
yeah yeah, adapter does create some properties in context. You are right, i am aware of it. I just missed to explain it clearly. what i meant is addition of context properties will not happen if pass thru used. Thanks its clear.
"No. The Context already exists on the Message when it comes from the MessageBox and
is equally available to any Component in any Stage. The Context that hits the Pipeline is whatever was last Persisted, either by a Receive Port or Orchestration. It is not created by the XmlAssembler (XmlTransmit)"
You are right , the context already exists on the message while it leaves the receive port, and once it persists
to message box the context and message context gets stored in messages in relative tables.
Now as you said the components get the message from the last persistence, assume i have a send port(with passthru)
subscriber and a orchestration subsrciber for this message.
Orchestration gets the message with context right!!
if the send sendport(with passthru) also gets message along with context, then where is this context removed/demoted
while sending it out?. i guess as per SAAkhlaq said,
here sendport(with passthru) should get a pure message without context as passthru used.
or is it that ultimately send adapter removes the context completely?
or is it something like biztalk run time load the context from database into cache and both orchestration and send port gets pure message, and if needed they use context from cache???
sorry i may be troubling you, but i am confused. i hope i am not creating any nuisance with this
post.
Ravindar

How and When Does the attribute VI_ATTR_VXI_TRIG_STATUS get initialized

How and When Does the attribute VI_ATTR_VXI_TRIG_STATUS get initialized. Do the actual trigger lines get measured or does the attribute get initialized to a default value when the vxi resource manager is executed?

Hey whl6868,
According to page 157 (or 3-135) of the manual (http://www.ni.com/pdf/manuals/370132c.pdf), there is no default value for VI_ATTR_VXI_TRIG_STATUS. If Resman is returning valid values for it, then it must be actually reading the lines. Else, I would only expect it to return valid values when you actually call the function yourself.
Regards,
David R
Applications Engineer
National Instruments

Texting on iPhone 5. When texting to multiple people why does the contact list return to the "A"s after you select a contact and try to add the next one in order?

Texting on iPhone 5. When texting to multiple people why does the contact list return to the "A"s after you select a contact and try to add the next one in order? This really slows you down when trying to contact 50 people with information. iPhone 4 worked just fine. Any suggestions on how to fix this?

None of my pictures that I uploaded into iPhoto are in my Finder under Pictures. Should I copy and paste my folders from iPhoto into here, in case something happens to my iPhoto program (in addition to backing them up onto an external hard drive like I already do)?
No, that's just wasting space. A back up needs to be on a different disk.
Your photos are within the iPhoto Library.

I keep getting an error that reads the network connection was reset when tring to down load a purchase?

i keep getting an error that reads the network connection was reset when tring to download a puchase from itunes and one know how to fix this

I'm having same problem today. Did yours get resolved? If so, please share. I'm dying....

I am trying to add the Youtube widget, but I get a black box saying blocked plugin. I have even tried to embed it from Youtube as well and it does the same thing. But when I drag the Vimeo widget over, it connects like it should. What am I doing wrong and

I am trying to add the Youtube widget, but I get a black box saying blocked plugin. I have even tried to embed it from Youtube as well and it does the same thing. But when I drag the Vimeo widget over, it connects like it should. What am I doing wrong and how can I fix this problem?

Make sure that both the web browser you're using and its Flash plug-in are up to date. Google Chrome has its own Flash plug-in it updates on its own. Firefox, IE and other have separate plug-ins.

Why does the color wheel come up when I I can't get rid of it.

Why does the color wheel come up when I try to open an email? I can't get rid of it unless I sign in again!

The spinning beach ball of death (SBBOD) can be caused by many things. Common causes are not enough RAM, insufficient HD space or another process using a lot of the CPU's power. You can open Activity Monitor (Applications - Utilities - Activity Monitor) for many things including the %CPU column to see if there is an app using a large %CPU. Also click the System Memory tab and see how much FREE RAM it shows. As a general rule your system should have 500MB or more available.
Finally I'd recommend reading and using the Spinning Beach Ball of Death article for additonal troubleshooting steps.

Does the Airport Extreme support HP cp1025? There are two versions of the printer the cp1025 and cp1025nw. I have the cp1025, and can't set it up. Is there a list of AE/bonjour supported printers?

Does the Airport Extreme support HP cp1025? There are two versions of the printer the cp1025 and cp1025nw. I have the cp1025, and can't set it up.
Is there a list of AE/bonjour supported printers?

Bonjour is a transport protocol. It also provides a means of advertising a printer on a network.
Any list that shows printers that support Bonjour is generally an indication that the printer itself supports this protocol, meaning that when it is connected to the network, you can see it in your default Add Printer browser. In the case of the Airport, it also supports the Bonjour protocol and will advertise any printer that is connected to its USB port. The printer itself does not have to support Bonjour. The Airport performs this function. And like many lists, they are not kept up to date because each vendor releases several new models every quarter or half year.
There are definitely printers that don't work when connected to the USB port of the Airport. And this is more that the printer driver does not support this type of connection, mainly due to the port not supporting bidirectional communications which some printer drivers require. The Canon UFR2 and CAPT drivers are a good example of this limitation. But this is only the Mac drivers. The Windows equivalent drivers work fine when the printer is connected to the USB port.
So with you having an issue with the Windows drivers then I don't think it is a case of them not supporting Bonjour but more to do with some other component not functioning when the printer is shared by the Airport. The error message appears to have more to do with local user rights which is probably driver related. I've seen some printers that you cannot use the Windows Add Printer wizard to add them. Instead you have to use the vendors utility because of some proprietary protocol being used. Maybe this is one of those?
Now that you seen how it should work based on when you used the C3188, if you still get that error message at point 6 of adding the C1025 then it would suggest a driver compatibility issue with the Airport - which is not necessarily a Bonjour compatibility issue. So unless there was another model of HP printer driver that you could use to this C1025 and that was also compatible with the USB port of the Airport Extreme, then I would suggest your best action is to replace the printer with a model that does work. Maybe even one that has builtin wireless so you don't have to use the USB port of the Airport.

Does the route list gets reset when adding route pattern in version 9 of CUCM?

Similar Messages

Maybe you are looking for