Does the sensor still work while wearing the shoes?

I purchased the fancy Nike+ shoes, the ones with the compartment for the sensor below the foot bed. I used the application (successfully) with my 2nd gen Nano for a month or two, then I stopped using the app when I was pregnant. However, I still wore the shoes. Now I can't get my sensor to link to my iPhone 3GS. Was my sensor still "awake" while I was walking around, even though it wasn't linked to my Nano or my iPhone?
Thanks!
MissSea

Yes, if the sensor in on your shoes, it will still be running. You either need to put it into sleep mode or remove it from your shoes. If the sensor battery ran out, it is officially not replaceable. But, if you google something along the lines of "nike + ipod replace battery" you can find ways of doing it without buying a new one or paying to have it fixed by Nike/Apple.

Similar Messages

If my iPhone was stolen and i want to reactive an old phone using that same number for the time being while i waited to see if I could get my iPhone back, would the iPhone still work while i was using a re-activated old phone of mine?

If my iPhone was stolen and i want to reactive an old phone using that same number for the time being while i waited to see if I could get my iPhone back, would the iPhone still work while i was using a re-activated old phone of mine?

If a new SIM is activated on the same account for the same number, any existing SIMs for that number are deactivated.
Why exactly would you care if the SIM in the missing device still works or not?

Does FCP 7 still works under Mountain Lion?

Hi,
It's very important, before I update my MackBook Pro to know if Final Cut 7 still works under this new Operating System, since I'm in the middle of a Project that's in that FCP version.
Thanks

Works for me:

Does iPhoto 5 still work fine with Snow Leopard?

I don't want to give up iP5 because it still let you print N-up on a page (e.g. 4, 9, 16 images/page) and that seems to be gone from iPhoto'08/'09.

I was going to ask how you found N-up printing and in checking through the print dialog I discovered you have to select a print size which is different from how it was before. So you pointed me in the direction that helped me find an adequate solution in the event that iPhoto 5 becomes unusable in the future. iPhoto'08 doesn't print quite the same as iP5 so I'll still hang onto iP5 for the odd job but '08 is definitely more usable to me for printing now.

HT2534 Does this method still work for creating Apple ID without CC?

An instructor of mine just tried this method and said it no longer works. Has anyone else had trouble with this process?

It is still valid. Note that you have to be creating a new Apple ID. You can't use an existing one.
Regards.

Does Time Machine still work when logged out?

Potentially dumb question here... but will Time Machine continue backing up if I log out? I don't want my administrator user account always logged in, but I want to make sure our central files are constantly being backed up.

Hi,
I logged out of my server before going home last night. When I came in today, there are Time Machine updates throughout the night.
To check this yourself, just logout and then the next time you login, open your Time Machine volume and see if there are any updates. I think you'll find that there are.
Hope this helps!
David

Do you really need the shoes to make this product work?

I just saw some information on the TV about this. My question; if anyone can help with it, is do you REALLY need the shoes to make this work. I mean all it is is a little disk and a wireless plug-in for the Nano. It would really help me out if someone can tell me.

You do not need the shoes to make it work. Check out this thread for ways people have gotten the sensor to work with non-nike+ shoes: http://discussions.apple.com/thread.jspa?threadID=559827&tstart=75

Spaces shortcut key still works in Lion

While I was still running Snow Leopard, I had set F5 to activate Spaces. Even though F5 doesn't appear to be listed in the Keyboard Shortcuts preferences, it still seems to work. Now that I've upgraded to Lion, strangely the key still seems to work, but I can't get to the Spaces pref pane since it's been replaced by Mission Control. Not a major problem, but ideally I'd like to assing Launchpad to F5, doing so doesn't work while the old Spaces shortcut key holds sway.
I got it to stop working once I set them all of the categories to defaults, but after a reboot it still seems to be set to F5.

com.apple.symbolichotkeys.plist also contains these settings:
Control+right and control+left moves from desktop to desktop
Control+1, Control+2, and so forth, go to the specified desktop
Option+Command+D shows and hides the dock
Control-Up shows Mission Control
F12 (or Fn F12) shows the dashboard
If any of those work, it's mystery. Maybe the file is invisible. Not likely. It can't be a bug in Lion, or lots and lots of people would have this problem. It can't be a corrupt installation file, because the problem is too specific. It could be that reinstallation or recovery would fix it. You have an Apple Store in München, so you could ask a Genius there. I think that is the best bet.
This is a system file. If it doesn't exist at log in, Lion creates it. It should not be missing. It occurs to me just now that the Preferences folder might have the wrong permissions and that could prevent Lion from creating the file. Your user account should own the Permissions folder and have read and write privileges. The everyone group should have no access. There should not be any other entries in the name column beyond those two.
Don't apply to enclosed items just yet. The plist files have the same permissions, but the lockfiles have an additional entry granting Wheel read-only access.

C6-00. Screen turns off, but touch sensor still wo...

in normal mode (non physical keyboard mode), i use it, everything works fine..
but in physical keyboard mode, once slide it, a few secs later, the screen turns off.. i tried to use the lock button at the side to turn it on back, but, nothing happens, i have to slide n lock unlock it many times to get it turned on again.( BUT SOMETIME, WHEN I SLIDE IT, EVERYTHING WORKS NORMALLY!)
when this thing happen, even in normal mode, i cant revive it back... i take out my batteries, put it back, start, it still doesnt turned on. but with "some miracle", sometimes it does turn on back.. but when i go to keyboad mode again... screen turns off.. same **bleep** happens.
anyone face the same problem?
"what do you mean by touch sensor still works?"
-when the screen turns off(at home screen), i press at the "contact" at bottom right of the screen, the phone does vibrate. proves that the touch sensor works.
fyi, i've tried,
7370
7780
shift + space + del.
these 3 formatting methods just doesnt get this thing back to its normal condition again.
sigh. lost trust in nokia

It is the latest v 20.0.042. In fact, I already reinstalled the firmware again and did a hard reset *#7370# but problem is still there. The display is totally off now either in vertical or horizontal keyboard mode, I have to slide the keyboard a little and hold it there to get the display back, it is too tiresome and is unacceptable. So I highly suspect the it is the sliding keyboard that causes the display problems.
I went to Nokia Care and they said that this phone is no longer under warranty. I will have to pay a substantial amount of money to have them repair it. This sucks

Php-cgi php not same version still works?

Maybe this post should have gone in the Package issues forum, but I thought more people would know about that kind of thing in this forum.
Anyways, I noticed that php-cgi was at version 5.2.1 and php main package is at 5.2.2. If i'm using lighttpd does this combination still work? Or should I flag php-cgi out of date?
I don't have much experience with php and php-cgi itself, I just set up my lighttpd server to support php through fcgi.

Well after the new php version got updated I tried to upgrade and it said that it conflicts with php-cgi. Obviously I couldn't know at that point that php now includes the php-cgi binary. So I created this post after I decided to cancel the upgrade process because I thought the conflict means that old php-cgi doesn't work with new php package.
Well now I just let it upgrade and it works (it even shows the cgi php.ini advise - but that doesn't completely tell that cgi is included; of course I could have gone for trial and error, but I didn't want to risk that on my server).
Thanks again for sorting this out.

I fainted and fell while holding my iPad and the screen cracked; it still works fine. It's just cracked. I have had this iPad for less than a year so it is still covered under warranties. Does this apply? If not how much to fix the screen?

I fainted and fell while holding my iPad and the screen cracked; it still works fine. It's just cracked. I feel horrible, it was a gift from my brother. have had this iPad for less than a year so it is still covered under warranties. Does this apply? If not how much to fix the screen? Please help

If you want a short list of third party repair options, here you go.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/

Hello. I recently pieced together a late 2008 MacBook Pro 15". Everything works fine except the battery constantly goes between "not charging" and "calculating" or, rarely "charging". It does charge after a long while and will report that it is charged.

Hello. I recently pieced together a late 2008 MacBook Pro 15". Everything works fine except the battery constantly goes between "not charging" and "calculating" or, rarely "charging". It does charge after a long while and will report that it is charged.
I have reset the NVRAM and the SMC a couple of time but that didn't work so I ran an Apple Hardware Test and while testing the logic board it gives the following error:
4SNS/1/40000000 LB1T
I've done some research and found this is a temperature sensor related to the battery, but cannot find where the sensor is located in the computer. Would you know how I can find the sensor to test it? Could my battery problem be related to something else? Would a fresh install of Lion help?
Thank you!
Mike
Two pieces of information that may or may not b helpful, the hard drive is from my early 2008 MBP and the only test disc I have access to is from an iMac.

Why do you have LION installed on that older machine?
So you say you built a macbook from a bucket of parts eh? Kudos
heres a pic of the battery temp sensor

I dropped my iphone 3gs in water and grabbed it immediately out. It gave me a charger is not supported with device screen every minute or two. I powered it off for the night. I havent experienced problems since. Why does it still work?

I dropped my iphone 3gs in water and grabbed it immediately out. It gave me a charger not supported sign every minute or two. I decided to turn it off for the night and the next morning it worked fine and only the bottom sensor was triggered. Why does it still work and how long will it last?

Water in itself will not kill electronic components if you let it dry out. Your first reaction to turn it off was a good one but you could have waited even longer.
It also depends what's on your water that will stay after the water itself had dried; like salt. Anything that iseither acid or conductor left on the circuit board will reduce the life of the board. Given said this, no one could state how long your iPhone will work since no one will know for sure where the water had time to infiltrate before you removed your device and no one what's may left there.
Consider yourself lucky. I don't understand however what you mean by a sensor triggered.

Am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it

i am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it still doesnt work it just asks me “slide to power off” please someone help me i just cant seem to put my ipod in DFU mode

To get the iPod in recovery mode and DFU mode you first have to turn the iPod off.
Just what is the problem you are tying to resolve?
Sometimes you have to let the battery fully drain if you can't turn the iPod off. After charging for at least hour try again.

HT201263 While doing the restore the connect to Itunes image is still on my phone and has not shut off? The Itunes "status" area now says "Processing File" and has said this for 15 mintues with no change. What do I do??? This is the second Restore I've a

While doing the Restore the "connect to Itunes Image is still on my phone and has not shut off or changed since starting the REstore. Now Itunes status bar says "Processing File" but has not changed or done anything for 15+ minutes. What do I need to do? Let it go or is it not working???? FYI, I tried to update to the 6.0.1 (I believe thats this update)

This was the third Restore I've attempted today.... 'm not sure what all I did including unplugging and plugging it back in, and messing with tryign to select my phone vs. my husbands but it starting moving again. It's now attempting to "back up" from ICloud... we'll see. Thanks

Does the sensor still work while wearing the shoes?

Similar Messages

Maybe you are looking for