Does the SPIF output on U330 use optical or coaxial cable?

Many thanks. I can't find the similar in stores, otherwise I can try them out myself.

vps wrote:
You can use both
But I would recommend you to buy and use Optical, it's simple. The best one is the optical link with 3.5mm head and the last connector is normal optical head.
If you want to use it with coxial, you will have to buy RVC
Thank you for the advice, and I ordered the cable like you recommended, however i still couldnt get surround sound to work.
I select the right playback device, however there is no red light coming out from the cable.
I am wondering is it my cable's fault, do I need to get a 6ft instead of 12 ft, or is it a sound driver issue.
I couldn't find any info on Lenovo documents, so I really appreciate your inputs.

Similar Messages

Does the RCA OUTPUT ON THE cdx-gt56ui run both sub and preout? if so how do I switch it to PRE-OUT

Does the RCA OUTPUT on the CDX-GT56UI Car Stereo have both Sub and PRE-OUT? if so how do I switch to PRE-OUT?

Hello Richard,
The unit has 2-channel Preamp Outputs on the rear of the receiver, used for connecting external amps. This unit doesn't have Sub Preamp Outputs.
The rear preamp outputs can be set in the menu to output a full range signal to the rear channels, or a filtered signal to a subwoofer. When set to subwoofer, the output typically has a selectable low-pass filter and is non-fading. You can change the rear preamp outputs by selecting REAR/SUB option under Setup menu of the unit.
If my post answers your question, please mark it as "Accepted Solution".
Thank you for your post.

Why does the video stop and start using airplay on Mountain Lion?

Why does the picture stop and start using airplay on Mountain Lion? I'm playing a film from a website and uising airplay to iTV. The sound is fine, but the picture stops and starts. Any ideas?

Why does the picture stop and start using airplay on Mountain Lion? I'm playing a film from a website and uising airplay to iTV. The sound is fine, but the picture stops and starts. Any ideas?

What does the RHD symbol mean when using the multiple speakers?

i have two 1st gen apple TVs and when i pull up the multiple speakers prompt, i see an acronym "RHD" after each device.
what does the RHD symbol mean when using the multiple speakers?
typically i was used to seeing the Apple TV-1 vs. Apple TV-1-RHD??
What is the difference?

It's been modified to run Remote HD.
http://remotehd.com/

How does the system identifies whether we use Psotive or Negative Time Mngt

Dear All,
How does the system identifies whether we use Psotive or Negative Time Management.
Appreciate your early response.
Regards
Rajesh

Hi
1. In positive time management we record the actual time of the employee working in organization and following are the infotypes we need to maintain in master data,
          1. Organztion Assignement [0001]
          2. Personal Data [0002]
          3. Absence Quota [2006]
          4. Planed working time [0007] with the time management status " if you are using PDC then "2" " Or "1. Time evaluation actual time".
          5. Time Recording Info [0050]
2. In Negative time management we are only recording the time deviation like "Absence, Illness, Leave" and following are the Infotype we need to maintain in master data,
         0001, 0002,0007 with time management status "0" i.e No time evaluation and 2006.
Best of Luck
Swapnil

Does the MX712 support wireless scanning using the MX Navigator EX v. 3.1.4 software?

Does the MX712 support wireless scanning using the MX Navigator EX v. 3.1.4 software?
When I attempt to scan wirelessly, it presents and error message asking if the scanner is turned off, or I need to have a USB connection to the laptop.
Thanks - Joel

Hi JoelAK,
Wireless scanning is supported, however, it appears you are using the wrong version of MP Navigator EX. The version that is appropriate for your device is MP Navigator EX VER. 5.1.0. This application can be downloaded from our website.
On this site, be sure you have the most up to date drivers as well. Once setup, try the scan again using the correct version of MP Navigator.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Does the iPad output correctly using an HDMI to HD-SDI converter?

Hi everyone,
I have a question regarding the iPad 2 & 3 HDMI output. I understand that HDCP is used primarily in iTunes Store to protect videos from being copied.
For a presentation using the iPad on Keynote and demonstrations using applications like Photos, Safari, Youtube, etc. Does the image and videos get broadcasted correctly using the iPad HDMI dongle connected to a HDMI to HD-SDI converter (similar to Datavideo's DAC-9) projecting to a HD-SDI input only projector?
Sincerely,
Joe

Thanks for the response.
Does it work when you attach an HDMI to HD-SDI converter to your HDMI converter?

Does the Aironet 3600 can be used in France (5ghz) ? What is the PSU voltage ? Hwic module equivalent exist ?

Hi,
Does the power supply from aironet 3600 series, AIR-CAP3602I-A-K9 is compliant with french voltage ?
Is it 110-220 input ? How to have a standart french plug or adapter if i bought this item in US ?
Does this hardware can be used in France regarding authorized wireless frequency 2.4 and 5 GHz (802.11a/b/g/n/ac) ?
Do you know if it exist any kind of HWIC module with same wireless performance that it can be used with G2 ISR Router (19xx/29xx/39xx) or previous generation ISR (18xx/2xx/38xx) ?
Best Regards.

Does the power supply from aironet 3600 series, AIR-CAP3602I-A-K9 is compliant with french
If you enable this AP, you are likely breaking French law. This AP is configured to be use with "-A" Regulatory Domain.
France should be using "-E".
Power supply issue ... 3600 will work with 15.4w PoE as long as you don't add modules. If you do, you need 20.0w PoE.
You have three choices: PoE switch, Power Injector 3 or Power Brick.
Edit: Just re-read your post about "802.11a/b/g/n/ac" so this confirms you need 20.0 PoE. So the same choices are still applicable: PoE+ switch, Power Injector 3 or Power Brick.

Search for the t-code where the specefic output type is used

Hi
I want to know how can we search for the t-code used for a specefic output type in use?
I have a requirement where in i have a output type, i knwo teh prog name and the form name...
i know it is used in SD and billing but i am not able ot exactly pin point as to in which t-code to be used..so that i can check the output throught the T-code.
Experts sugget!!
Thanks
Prashant

Hi
It is used for a Standard t-code i want to find that T-code. Through NACE the outputtype (which i already have) i can find teh prog name and the form name.
and through SPRO also its the same info...
i want to knwo for SD-> Billing->INvoice i can find the output type...i want to knwo what T-code needs to be run and on givign the data and running the out put type from the menu and choosing my OUTput type...and seeing the output in the print format.
Hope you got my problem.Thanks for the reply.
Prashant

Where does the processing take place when using a remote front panel?

Hi,
I am considering upgrading my LabView software from 6i to 6.1 for the new "two click" remote front panel feature. I have already seen a demo of this feature but have just a few questions before I get the upgrade:
My setup consists of several pieces of equipment connected to Labview via GPIB, to aid in the evaluation of a new microchip.
1. I wish to grant control of the setup to anyone with a web browser, Is the remote monitoring feature compatible with both Netscape and IE?
2. The VI which controls the setup is currently located on the PC beside my setup. When I embed a VI in a remote front panel, where does the processing take place, is the local VI still controlling the setup? and
the remote panel just sending and receiving data from the local VI.
Thanks, Troy

> I am considering upgrading my LabView software from 6i to 6.1 for the
> new "two click" remote front panel feature. I have already seen a demo
> of this feature but have just a few questions before I get the
> upgrade:
>
> My setup consists of several pieces of equipment connected to Labview
> via GPIB, to aid in the evaluation of a new microchip.
>
> 1. I wish to grant control of the setup to anyone with a web browser,
> Is the remote monitoring feature compatible with both Netscape and IE?
>
Yes. Provided they are resonably modern versions.
> 2. The VI which controls the setup is currently located on the PC
> beside my setup. When I embed a VI in a remote front panel, where does
> the processing take place, is the local VI still controlling the
>
setup? and the remote panel just sending and receiving data from the
> local VI.
>
The computer which we refer to as the server, the one with the GPIB card
in your case, will execute as it does now. In fact, its window will
even be open. The remote client computer, the one with the web browser
will be running the runtime engine and processing user events, value
change and property/method events from the server. So in reality, both
computers will be sharing the load a bit. This allows for very small
packets to be sent between the computers. It is in fact quite similar
to publishing the data between the computers using datasocket.
One thing to keep in mind. Standard LV includes a license for one
connection. If you want to allow for multiple web browsers to view at
the same time, additional licenses are available. Also, only one user,
remote or server may be in control of the panel at a time. That means
that if you want to be able to operate the panel, changing kn
obs or
flipping switches, the others will become viewers only until you give up
control. Hopefully this isn't a surprise, but I thought you might want
to hear about it now.
Greg McKaskle

Does the new MacBook Pro have an optical drive?

Quick, easy question - does the new MacBook Pro come with an optical drive? Or does one have to purchase an external optical drive if one wants one?

Depends on which one you buy. The Retina models do not and if you need one, have to purchase the external SuperDrive for an additional cost. The other non-Retina models, 13" and 15", do come with an internal slot-loading SuperDrive. There are, as yet, no more 17" models and no announcement whether they will be released later.

Does The X-Fi Extreme music have an SPDIF ( Coaxial or Optical ) outp

Hello all!
It's my first post and hopefully a simple question...
As the title say's....Does the X-Fi extreme music have an SPDIF output. I just want to connect it to an offboard DAC like i do with my SoundStorm atm ?
Thx in advance
Paul

Penixor wrote:
I have that set up but what i want it to do is take digital input from my DVD player that is hooked up to my TV and have it play out of my computer speakers. I can seem to get it to do this, got any suggestions?
Hi Penixor,
Are you saying you can get DD 5. encoding from the X-Fi card? Even for games and WMV HD 5. files?
Thanks...

How much power does the iPod output?

I tried measuring the power output via the headphone jack, and the reading was so small my multimeter could barely measure it. It peaked at about half a volt, and thats with a very loud song with the music cranked up all the way. It averaged about .3. That seems REALLY low, maybe enough to power the cheap earbuds the iPod comes with, but not enough for more power demanding professional headphones or other non-powered audio devices. I called every number apple has to call, and it seems no one in the entire company knows anything about their own product when it comes to power output.
Also, what is the power output for the serial port on the bottom of the iPod? I couldn't measure that with my multimeter without splicing some wire which I wasn't about to do.

Nope, I don't mean the volume level. I mean the actual measurable ammount of electricity that the iPod is physically capable of outputing via the headphone Jack. I imagine the hard drive and screen ***** up most of it, so that the full potential cannot be tapped, because frankly the apple designers had no reason to give it any significant booster space.
No, but having the volume at a max and and playing a variety of different types of music will give one a decent idea of the average power output, which is about a .3. Seems it did show me something, buddy. accurate min, max, and average power should not be that hard to caclculate.

HT201412 Hi I just got the I phone 5S and I can only charge it with the cable that came with it in the box , I have tried using other also original cables that came with my I pad mini or I phone 5 with no luck .

Does The I phone 5s have a different charging cable ??

Well, assuming all of the above, Notifications, etc., it just might be time for a visit to the Apple tore genius center for a session with the techs. See if it is a fault in the hardware or just an iOS reinstall is the answer.
One more thing you could try, backup so you have a record of content, then restore to factory conditions be an Erase All Contents and Settings. Then restore from the backup you just made. That has helped some with WiFi problems, may be it would work with your problems.
But with that behavior of another app with problems, the geniuses looks like a less stressful thing to do.

Why does the OS ask me to use StuffIt when StuffIt is not installed?

I have a brand-new Mac Book (10.4.8). I have not explicitly installed either Microsoft Office (though the Office trial is still running) or StuffIt.
I'm trying to download and open a .sit file. It erroneously gets opened by Microsoft Word. I've gathered from elsewhere on this forum that the problem is that I don't have StuffIt installed on my machine.
I used Spotlight to look for an application on my machine called Stuffit*, and couldn't find any.
However, when I try to download the file using Firefox I get a dialog box asking me whether I want to save it to disk or open it with StuffIt.
I'm confused.
1) Does Stuffit come preinstalled on the Mac?
2) If StuffIt is not installed on my machine, why do I get an option to use it in a download dialog?
Mac Book Mac OS X (10.4.8)

1) Does Stuffit come preinstalled on the Mac?
No
2) If StuffIt is not installed on my machine, why do I get an option to use it in a download dialog?
Don't know.. but if you're certain that neither you nor anyone else with access to the computer has installed it, you could just download it.
http://www.versiontracker.com/dyn/moreinfo/macosx/182
If you choose the option to Open it with Stuffit from FireFox, what happens?

Does the SPIF output on U330 use optical or coaxial cable?

Similar Messages

Maybe you are looking for