Does the system omit release procedure if a user creates a purchase order he is to allowed to approve?
Dear experts,
Can the SAP system omit triggering of a release strategy even though the conditions for starting a release strategy are being met?
I created a release strategy where I am the user authorised to approve purchase orders in certain situations. When I create a new purchase order that meets those specific conditions, my system produces a message "Purchasing document 4500017515 cannot be released" after I try to release my purchase strategy using tcode ME29N.
I would be thankful for your responses.
All the best,
Radoslaw
Dear Jurgen,
I have edited my release strategy so that each characteristic has a threshold value, and afterwards tried to create a purchase order (tcode ME21) where the purchasing organisation, purchasing group as well as net order value fulfilled the criteria for triggering a release strategy. I also made sure that the PO time&date is preceded by the recent changes that I have done to my release strategy. Unfortunately, my new purchase order was still not subject to the release strategy.
I will now try to find a way to delete one of the unnecessary 'net order value' characteristics from class so that it is not included in the release strategy. I will also try to search for inconsistencies in my release strategy and purchase order in line with Bijay's advice above.
Thank you for your comments.
All the best,
Radoslaw
Similar Messages
-
How does the system calculate nondeductible taxes?
Dear Gurus,
How does the system calculate nondeductible taxes?
Thanks..The sytem calculates the Taxes based on the Tax rates maintained in a tx code, the Caluctaion is based on the taxing procedure assigned to the Country.
Non deductible tax is identified based on the Account key assigned to the Condition type in the Taxing procedure.
The Non deductible tax Account keys are
NAV - Non-deduct.input tax ( This will distribute the tax into a new line item)
NVV - Non-d.input tax dist ( this will Distribute to relevant expense/revenue items ) -
How does the system calculate taxes?
Dear All,
How does the system calculate taxes?
Can anybody explain in detail how the values will flow from PB00 / PBXX to BASB ?
Is this flow will remains same in both deductible & non deductible taxes ..??
Pls explain
With RegdsHi
Just remove the base type 362 in the taxing procedure & check if your tax is calculating or not.
The Tax determination still works.
FORM FRM_KOND_BASIS_362.
*Application country specific
*This alternate base value is to be attached to BASB. This routine
*fetches KZWI6 captured in the pricing procedure.
Thanks & Regards
Kishore -
Can anyone let me know how does the system calculate forecast strategy?
Hi all,
I am new in Demand planning,, I can see a couple of Forecast strategy used in the production. I would like to know how does the system does the calculation for the forecasting strategies like
36 Median method
13 Moving average
94 Linear regression
etc.
Can anyone pls guide me how does the system do the calculation and how to validate those calculations!!
Thanks
PoojaHi Pooja,
The below link will contain the detailed list of all forecast strategies alongwith how
it will be calculated alongwith the formulas
http://help.sap.com/saphelp_scm70/helpdata/EN/ac/216b6e337b11d398290000e8a49608/frameset.htm
Please confirm whether this helps you to resolve your query
Regards
R. Senthil Mareeswaran. -
Why does the system chime sound whenever I open Reader 11 of a pdf document?
Why does the system chime sound whenever I open Reader 11 or a pdf document?
Don't know. You can turn system sounds OFF in your control panel. XP it's under Sounds, Vista, 7 & 8 it's under Hardware and Sound.
Click Change system sounds
Select "No Sounds" to disable all windows interface sounds.
Click Apply and OK -
I have an iMac 17" 1.83ghz intel core from 2006. I need to reformat the hard drive. Which system do I reinstall - the system disk in came with or can I install 10.6.8 which is what it's running now. And does the system have to be for an iMac?
Reformat usiing the original install disc then update to v10.6.8.
Mac OS X 10.6: Reinstalling Mac OS X -
Can iCal use both English and French languages or does the System software need to be either French or English?
joanfromardon wrote:
Can iCal use both English and French languages or does the System software need to be either French or English?
The calendar language is determined by system prefs/language & text/formats.
The app language is determined by system prefs/language & text/language, or you can probably use
http://www.tj-hd.co.uk/en-gb/languageswitcher/ -
How the systems pick pricing procedure in PO?
Hi Masters
I have deleted the pricing procedure assignment thro schema group in the configuration.But the system picks the pricing procedure RM0000.How?
Regards
MohanHi
Thank you for your replies
I have maintained blank entries of shema group for the purchasing organisation and vendor.And I have also deleted entries for assignment of blank entries to a pricing procedure in the following path
Materials Management->Purchasing->Conditions->Define Price Determination Process->Define Schema Determination->Determine Calculation Schema for Standard Purchase Orders
ie., Schema grpPorg Schema Grp Procedure
Blank Blank XXXXXX -
deleted this entry
01 Blank AAAAA
My question is how the systems picks pricing procedure in PO although the assignment is deleted?
-Mohan -
How does the system knows hire action first
Hi all,
Iam new to this community, recently i have joined as an SAP HR trainee ,and i am undergoing SAPHR training Programme.
why can't the system allow us to do promotion action before Hire action?where do we configure this to make it happen, how does the system knows to do the Hire action first, where are the settings for this..
Swathihai
there are a number of programmes running in the back groung when u do any application.
the validations will be written in them
when u try to do something through the programe running at the back ground does these validations like the example u have taken when u do the promotion action it checks whether actions exists or not if not then it throws the error written in the program.
regards
nalla -
How does the system identifies whether we use Psotive or Negative Time Mngt
Dear All,
How does the system identifies whether we use Psotive or Negative Time Management.
Appreciate your early response.
Regards
RajeshHi
1. In positive time management we record the actual time of the employee working in organization and following are the infotypes we need to maintain in master data,
1. Organztion Assignement [0001]
2. Personal Data [0002]
3. Absence Quota [2006]
4. Planed working time [0007] with the time management status " if you are using PDC then "2" " Or "1. Time evaluation actual time".
5. Time Recording Info [0050]
2. In Negative time management we are only recording the time deviation like "Absence, Illness, Leave" and following are the Infotype we need to maintain in master data,
0001, 0002,0007 with time management status "0" i.e No time evaluation and 2006.
Best of Luck
Swapnil -
How does the system knows age or seniority is crossed for so and so... EE
Hi Experts,
In my project we have configured some Health plans based on ages and seniority,
Employee can enroll in to the plan when they reach the age or seniority,
my question is how does the system knows age or seniority is crossed for so and so... EE, where exactly we do this setups
Pleae let me know your valuable answers
Regards
Sreenihr_entry_date and you can use various
fm to calculate this, It reads 0019, 0041 or Hdate feature
3QP8 Time related calculation function mod.
HR_AUPBS_SENIORITY Calculate the whole length of service of employee
3RP3A Leave schem proration modules
SGPS_LS_SENIORITY_CALCULATION Function for seniority calculation for Singapore Leave Scheme
HRDO
HR_DE_PBS_SENIORITY_PERIODS
HRFPBS4AV0
HR_PSF_AV_ANC_INPUT_SENIORITY
HRF_METADATA_IT
HRF_READ_SENIORITY_IT -
What does "The System bootstrapper has crashed: Bus error" mean ?
What does "The System bootstrapper has crashed: Bus error" mean ?
Was this an upgrade?
You could repair disk and permissions, but I suspect a corrupt OS X. I would reinstall the operating system.
COmmand R on reboot if your Mac is newer. -
does the system library need to be on the primary hard drive or can it be on my external hard drive and still be able to use the cloud?
I have the system Library on a second internal drive and it is syncing with iCloud with no problems. Also the Media Browser it seeing it there.
Only make sure, your external drive is directly connected and correctly formatted MacOS Extended (Journaled). -
What does the system recover kit entail?
I dropped my wife's HP pavillion dv4i notebook, and afterwords had to replace the HDD. The Notebook did not come with a recovery disk to reinstall all the software it came with. I did the USB tool to reinstall the correct verions of windows 7 but I don't have a valid Windows product key. the sticker on the bottom with the key is now unreadable. I put the damaged HDD in a external case and am attempting to read the key without any luck.
What does the system recovery kit for consumer notebooks come with besides drivers? would this contain a new product key?
This question was solved.
View Solution.The Recovery kit installs Windows and all original drivers/software. Yes it includes an activation.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
how come the sight was down so long? and why does the system not send emails anymore with responses?
The system is back up and fully functional. How long has it been since you stopped receiving notifications? Can you share your form with us so we can have a look into what might be going wrong?
Andrew
Maybe you are looking for
-
Blacklisting in SAP e-Recruiting
Dear Gurus, What are you experiences with candidate "blacklisting" in SAP E-recuiting. What are standard tools provide in SAP E-recuiting to prevent "unwanted candidates" from appearing in searches. Does any of you have specific examples of pratical
-
Vertical Inheritance with Application ID Hierarchy
Hello, I want to implement Vertical Inheritance with Application ID Hierarchy, using a HyperSonic-Database. The essential code is appended. The following test-application leads to an exception. Things work fine, if I use one ID-class for all persiste
-
MediaPlayBack component, forward button grayed out
I am using the mediaplayback component and it plays the FLV fine when I test it. It allows me to pause and play and rewind to the first frame, but the fast forward button to go to the end of the flv is grayed out. I don't know why? Also I am loading
-
I have a 2012 Mac Mini. I downloaded Mavericks last week after the release. I have not been able to download an app off the app store since downloading Mavericks. I recieve the message unknown error. Any suggestions?
-
Hierarchy Node- Overall query result
Hi Gurus, I have a query with hierarchy nodes. For example Measure overall result Measure set 1 ASA ACEI Measure set 2 HF AMI In the above result the option I chose for node position is ABOVE and I get the overall result below Measure. But i n