Does the tool to Group and Ungroup objects still exist in word 2011 14.3.9 and if so how can one access it

See my question !!!

Hi Johnandhanna
This question relates to Microsoft Office and you've posted it to an Apple community. The best place for all MS Office for Mac questions is at:
http://answers.microsoft.com/en-us/mac?auth=1
In regard your question, the answer is yes, it does still exist. You need to select the items first (so you get the 4 arrowed cross cursor) and then right-click on them to access the Grouping submenu.
Hope this helps.
Joe.

Similar Messages

Does the "Warning! Not Enough Memory" bug still exist in Logic 8?

Hello everyone,
I'm wondering if the dreaded "warning, not enough memory" bug still exists in Logic 8. Here is a detailed account of the bug from Logic 7: http://discussions.apple.com/thread.jspa?messageID=767597&#767597
If this is fixed, I'm seriously considering upgrading mid-project! The film score I'm working on has many doubling parts that I'd like to edit at the same time in the matrix editor. However, editing multiple parts in the matrix editor seems provoke the little bugger, and I've already been bitten a few times in this project already. The only solution I've found is to stay clear of editing multiple parts at once (i.e. edit each parts individually, which obviously takes more time) or save before editing and hope I dont get bit.
I would LOVE to hear a report that this bug has been exterminated, and perhaps may upgrade mid project if thats the case.
Thanks in advance for your reply!

Heya,
I'm not familiar with the bug you're talking about. But would, as a fellow film composer, strongly urge you against the mid project switch.
I loaded in LP8 and ofcourse had a look at what it was all about, and it's really really fantastic. It also seems very stable. I fortunately have a side project that I am working on so switched to LP8 for that. Whilst I'm thankful to get my head around a very new approach for logic, I'm also thankful that I have this side project as it has illuminated a multitude of problems that exist with LP8 that would make any scoring process a bit of a headache to say the least. The main one being that if you don't have a very very powerful mac (I'm prepping a really fully loaded 8 core) you are not going to get anywhere near the performance out of Logic as you do with 7. This is a bottom up overhaul and it needs hardware to match. Heck even my 30" cinema display seems cramped and insubstantial on this new version. I would be so bold to say hold off until you have a hearty new mac and at least 8.2 is released IMHO but maybe try and get on it onto a smaller project to familiarize yourself before hand.

All of a sudden I can no longer open tabs by clicking "+" or right clicking on the tool bar. To open a new page, I have to open a whole newFirefox window. How can I fix this?

All of a sudden I can no longer open tabs by clicking "+" or right clicking on the tool bar. To open a new page, I have to open a whole new Firefox window. How can I fix this?
Also, Firefox crashes frequently. Is there a fix for this also?

Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox 3.6 that prevents new tabs from being opened.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons
For the second issue, the [[Firefox crashes]] support article may help.

URGENT: My iPad doesn't have an app store at all, there is no icon for it, and searching it on my iPad doesn't come up with any results. How can I access the app store?

HELP! I don't know why my iPad doesn't have an app store, or maybe someone uninstalled it, but how do you access the app store? My iPad doesn't even have an app for it!

restricted? as after my ios 8 update I get this msg "can not access the app store" for my ipad 4

The Microsoft Word suddenly quit on my iMac desktop. How can I access the documents saved in desktop ?

What made the Microsoft Word ( 2011) quit on my iMac desktop ( OSX10.10.1 ) suddenly ?
I need to access the documents saved on my desktop. Please help, anybody ?

GLORIADONM wrote:
What made the Microsoft Word ( 2011) quit on my iMac desktop ( OSX10.10.1 ) suddenly ?
Nobody here would know that.
I need to access the documents saved on my desktop.
Okay, so then go to the folder where you saved them, and open them

I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

Same issue here, previously did work perfectly

Hello,how much does the iphone 4 16gb unlocked cost if i want to buy it as a gift and to use it outside USA?

Hello,how much does the iphone 4 16gb unlocked cost if i want to buy it as a gift and to use it outside USA?

If you're talking about buying the phone in the US, forget it. There are NO unlocked iPhones sold in the US and no US iPhone can be officially unlocked. Thus, it doesn't really matter what it costs.

Try doing the update would not download. So like a dummy I did what I went and downloaded the new itunes so it would update itunes did it before and it worked at first it would tell me that I was missing MSVCR80.dll so I downloadeditagainandnowitwon'twork

try doing the update would not download. So like a dummy I did what I went and downloaded the new itunes so it would update itunes did it before and it worked at first it would tell me that I was missing MSVCR80.dll so I downloaded it again and reinstalled it and now it won't work at all

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

Requirement to check the syntax error of Customize SAP Objects in existing landscape.

Hi All,
I have two requirements which are a s follows :
1 ) Check the syntax error of customize SAP Objects in existing landscape except using the Tools which are already given by SAP( Example : Code Inspector , Extended Syntax Check etc.). I have to create a program to fulfill this requirement.
2 ) In case of SAP Upgrade is it possible to know the syntax error in advance that the existing source code will not work in the upgrade version?
Please help me out to solve my issues. Thanks in advance.

Dear Abhishek,
For the code inspector, the syntax check and the extended syntax check, you can define a set of objects to be teste thru SCI:
Go to SCI
In the block 'Object Set', you can create a set. For ths, you have to give it a name, select with the icon left of the textbox if this is a global (for all users) or a local set and click the create Icon.
in the next field, you can define which objects ... are part of the object set.
When using SCII to execute the code inspector, you can specify this set instead of a transport(s) or programming objects.
To run only the syntax check and or the extend syntax check, you can specify a check variant in SCI (third screen block) which contains only those tests or you can in SCII uncheck all tests except those 2.
Regards,
Hans

I am trying to use powerpoint but when I open a document I want to work on it does not open on my desktop. It appears as open on mission control but it disappears offscreen. How can I get it to open where i need it and can work on it?

I am trying to use powerpoint but when I open a document I want to work on it does not open on my desktop. It appears as open on mission control but it disappears offscreen. How can I get it to open where i need it and can work on it?

It's almost certainly too late.
The time to create a backup is before a catastrophe. After a catastrophe, it's too late.

Will doing the software update to 6.1.2 destroy any info saved on my iPhone 4? If so how do I back up what is on there - especially the contact list?

Will doing the software update to 6.1.2 destroy any info saved on my iPhone 4? If so how do I back up what is on there - especially the contact list?

see the link above
and this discussed in above
http://support.apple.com/kb/ht1766

How can i access all the objects of one schema from another schema

Dear All,
How can i access all the objects(Tables,Views,Triggers,Procedures,Functions,Packages etc..) and do the modifications of one schema from another schema (Without using synonyms concept).
Thanks in advance,
Mahi

First of all, synonyms only help you easy reference the object. It doesn't have any implication of object privilege.
As long as you have proper privilege on target object. You can access it with or without synonyms.
Assuming you have proper privilege of objects, you can use following command to assume schema owner.
ALTER SESSION SET CURRENT_SCHEMA = Schema_owner

Within Music Library can anyone please explain why when I select the option to sort 'Album by Artist' a number of tracks are being treated as separate albums? How can I correct this? I have tried to 'drag and drop' but that doesn't work.

Within music Library can anyone please explain why after I select the option to sort 'Album by Artist' a number of tracks are being treated as separate albums? How can I fix this? I have tried to manually correct by 'drag and drop' individual tracks but that doesn't work. My music library includes a number of repeat album artwork images simply because not all tracks are being listed under the one album making my library more difficult to use than it should. Any advise would be appreciated.

See Grouping tracks into albums.
tt2

Does my macbook air have a built in virus scan? how can I access and use it? also any recommendations of what software if this is not avail ?

does my macbook air have a built in virus scan? how can I access and use it? also any recommendations of what software if this is not avail ?

Contrary to what Geeks on Hugs is telling you, Mac OS X does indeed have a basic malware scanner. It is not a feature that is directly accessible to the user, and works a bit differently than every other malware scanner out there. Gatekeeper, which has been mentioned here, is entirely separate, and provides a different method for helping to protect you against malware.
The anti-malware scanner in Mac OS X is called XProtect. When you download an application (or any other kind of executable code), it is automatically "quarantined," so that when you open it you're asked if you really want to do that. I'm sure you're very familiar with this aspect of Mac OS X if you have ever downloaded any apps from outside the App Store. What you don't know, though, is that each time you try to open a new app, that app is checked by XProtect. If it is identified as malware, you will not be allowed to open it, and will be warned that it's malware.
At this time, there is no known malware that can infect a properly up-to-date Mac. All current malware will be blocked by one or more methods.
For more information, see my Mac Malware Guide.
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com.)

How can one transfer emails and contacts from Zimbra to gmail, without it being deleted if the Zimbra account is shut down?

How can one move Zimbra Contact list and emails to a gmail account, so they won't be deleted if the Zimbra account is shut down?

What does this have to do with iPhones or anything else Apple related. Contact Zimbra and ask them...

Does the tool to Group and Ungroup objects still exist in word 2011 14.3.9 and if so how can one access it

Similar Messages

Maybe you are looking for