Does the two installations rule follow the suite or individual applications within the suite?

I would like my web tools on my mac and windows laptops but I want my video/audio editing tools on my desktop tower. So no individual apps would be installed more than twice. Premiere, After-effects and Audtion would all be installed only once but on a 3rd machine - is that possible or would that require deactiving the entire Suite on one of the laptops? - thanks

It's not possible. The activation is per suite, not per product.
Mylenium

Similar Messages

  • When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

    When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

    You can try downloading the 64 bit version.  You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  • Does the Technical Communication Suite have an installation application similar to the Creative Cloud Suite? If so, how do I get it? If not, how do I upgrade from version 4? Thank you

    Does the Technical Communication Suite have an installation application similar to the Creative Cloud Suite? If so, how do I get it? If not, how do I upgrade from version 4?
    Thank you.

    Not sure what CCS has that you’re referring to, but TCS5 is out and can be installed via subscription or downloaded installer.

  • When I click PDF file, the file does not open and  installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.

    When I click PDF file, the file does not open and  installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.

    Did you ever install Acrobat? It is not installed automatically with CS, but requires an extra installation step.

  • Does the Student License Allow for Two Installs?

    Does the Student License Allow for Two Installs?
    I have a desktop iMac and a Macbook notebook. I just purchased Adobe Web Standard CS3 (student license).
    Can I install and activate the package on both of my computers? I know I could do this with a regular license, but I was unsure about the student license.
    Thanks in advance.
    Dave

    HEEEEEELPPPPPPPPPP, PLEASE
    I purchased adobe cs3 primium but i already had photoshop installed. I installed cs3 primium and now i keep getting the error that the licensing has stopped working can't use file cont IT or cust. support. I tried to download the clean file and it gives me the same error to open this file. i tried to uninstall with control panel programs and uninstall and it gives me the error uninstall not complete. I tried to repair with disc and uninstall with the disc and nothing is working. I have windows vista with 100g hd 500 mem duo core all the proper requirements but i can't get this to work.'
    HELP anyone

  • Does the single user license Leopard allow installation on two Macs?

    Does the single user license Leopard OS 10.5 allow installation on two Macs - say my G5 desktop I use at home and the Macbook Pro I take on the road?

    Thanks everyone. I don't intend to risk at that… seriously, the problem is many software licenses allow for installation on two computers (one "at home" and the other "at work", for instance) - at least all my recent purchases, mostly music production software such as Finale, Logic, Line 6 stuff and Live. That's why I thought Apple might have been a little more generous at that…
    I appreciated everyone's help at clarifying that.

  • Error while doing the Oracle 9i Database Installation

    PROBLEM ONE
    While installing the Oracle Database 9i on Windows 2000 Server with 256 MB Ram, I got the following error
    Windows - Wrong Volume
    The wrong volume is in the drive. Please insert volume ORCL9011_1 into drive E:.
    This message occured when percentage done was 100%. It was copying visualsdo.exe
    PROBLEM TWO
    Then I deinstalled the Oracle 9i software and deleted the oracle folder from both the Windows Explorer as well as in the RegEdit.
    Again I started doing the installation...
    In Oracle Database Configuration Assistant, while it was installing "Adding Oracle JVM", I got the following error
    "Oracle Database Configuration Assistant: ERROR"
    "ORA-06576:not a valid function or procedure name"
    When I clicked Ignore I got the following error
    "Oracle Database Configuration Assistant: ERROR"
    "ORA-04021:timeout occured while waiting to lock object
    SYS.META-INF/MANIFEST.MF"
    Please let me know why this problem occured and what is the solution for this......
    If you need any information then please let me know
    With Regards
    Deepak

    You have too few RAM on your machine, even you could successfully create an instance, it's going to slow as hell.
    When you run DBCA to create database, instead of actually creating the database you could choose to dump the SQL scripts and files used for database creation to a directory. This way will give you a chance to modify pfile and reduce the SGA parameter. I believe the default SGA of instance created by DBCA is already beyond your RAM limit.

  • Does the pre-defined rules provide by SAP in PC 10?

    Hi Everyone
    I have two question about Process Control 10.
    1. Rules, sample controls and scripts provided by SAP in PC 2.5.
    Does the pre-defined rules provide by SAP in PC 10?
    2. If it provide, how many?
    I've read a lot of information about PC 10(RKT, Application Help, Master, Installation, Upgrade, Migration, and Operations Guides),but I can't find it..
    Regards
    Naoto

    Hi Nato,
    I believe GRC 10.0 versions are only avalaible for ramp-up's. There is a live expert session being arranged by SAP.
    You could attend one of these for more info.  You could look at this [thread|GRC Access Control 10; for more details about the webinar.
    Thanks,
    Chinmaya

  • Unable to install photoshop elements 13 on new computer.  Error message is:  This installer does not support installation on a 64-Bit windows operating system.  Please download the 64-Bit version of photoshop elements.  How do I do this?

    Unable to install photoshop elements 13 on new computer (Windows 8.1 OS).  Error message is:  This installer does not support installation on a 64-Bit windows operating system.  Please download the 64-Bit version of photoshop elements.  How do I do this?

    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  • I am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

    i am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

    download the 64bit installer,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Transfer Rules: How does the mapping work?

    Transfer Rules: How does the mapping work?
    Is there a document out there that explains the following or can someone help clarify it for me. I have some confusion on what is really going on.
    When I create an InfoSource (IS_Test)  as a “Flexible update…”  and then “Assign DataSource”  (DS_Test) and I respond Yes, to the message “DataSource assignment DS_Test to InfoSource IS_Test Save”
    a) <b>Under “Transfer_Structure/Transfer_Rules”</b> in the InfoSource
    1)  the “Transfer Rules” tab, what are the fields found in the right column (Assigned InfObjct-field)? And where do the fields you enter in the left column (<b>Communication Str/</b>Transfer rules) eventually go?
    2)  the “DataSource /Trans. Structure” tab, can I always assume that all the fields in the right column (DataSource) came from DS_Test? The left column (Transfer Structure), in my test was exactly the same as on the right. Where do these fields eventually go?
    b) Under “<b>Communication_Struct.”,</b> in the InfoSource
    3. the right column (ISource Fileds) where from those InfoObjects. if I am now creating my InfoSource. Where did they come from?
    4. The left column is “<b>Communication Structure</b>”, which at this point has no InfoObjects, if I move a couple of InfoObjects from the right to the left, where do these Objects in the left eventually go?
    5. what is the relationship between the “Communication Structure” in 4 and 1? Or any relationship between a) and b) as a whole?
    Thanks.

    Hi Caud,
    As Ashish pointed out, communication structure contains fields (infoobjects) that suppose to go to data targets. Which IO in CS to which IO in the data target will go (and what transformation of data may occur) is determined in URs of the data target.
    The transfer structure is the structure in which the data is transported from the source system into BW:
    http://help.sap.com/saphelp_bw33/helpdata/en/3f/0e503c3c0d563de10000000a114084/frameset.htm
    In “Transfer_Structure/Transfer_Rules” in the IS, DataSource /Trans. Structure” tab, right part shows fields in the Datasource, the left part – fields in the transfer structure. There is also a transfer structure in R/3 for a given DS. Transfer structure in BW is created identical to the TS in R/3 during TRs activation.
    During data load data are transferred 1:1 from TS in R/3 to TS in BW.
    TS in BW corresponds to the PSA table structure.
    How data from PSA are transferred to the CS is determined in TRs.   
    The 3rd column (“Field”) (“Transfer Rules” tab, right part (Assigned InfObjct-field)), contains field names of the DS (TS); and the 1st column shows IO in the CS to which the DS field will go. So, it’s a mapping DS filed -> CS field.
    The left part (“Communication str./Transfer rules”) is always identical to the CS content. But the 4th column (“Tp”) shows possible data transformation during transfer from PSA to CS. If this column contains a yellow triangle then there is no transformation (Value of DS field will go to value of CS field). If there is a red cross, it means that no data for this CS field is supplied from a DS. You can click on this yellow triangle and choose: 1). Another field from a DS; 2). Constant; 3). ABAP routine; 4). Formula. So, here you can determine the data transformation. Moreover, there is a possibility to create a start routine (blank sheet icon at the top).
    And finally, here are the answers on your questions:
    Q:
    a)     Under “Transfer_Structure/Transfer_Rules” in the InfoSource
    1) the “Transfer Rules” tab, what are the fields found in the right column (Assigned InfObjct-field)? And where do the fields you enter in the left column (Communication Str/Transfer rules) eventually go?
    A: Right part shows a mapping between DS and CS fields. Left part shows CS fields and data transformation (TRs) during data transfer from TS (PSA) to the CS. These are fields in the CS that will go to data target and which are fed from a TS (DS).
    Q: 2) the “DataSource /Trans. Structure” tab, can I always assume that all the fields in the right column (DataSource) came from DS_Test?
    A: Yes, you are right.
    Q: The left column (Transfer Structure), in my test was exactly the same as on the right. Where do these fields eventually go?
    A: As I described, left and right parts are identical. These fields will go to CS.
    Q: b) Under “Communication_Struct.”, in the InfoSource
    3. the right column (ISource Fileds) where from those InfoObjects. if I am now creating my InfoSource. Where did they come from?
    A: these are fields from an IS template, the name of this template you can see above this right part.  Actually, during IS (CS) creation you can choose different templates and choose fields from them transferring them into the left part.
    Q: 4. The left column is “Communication Structure”, which at this point has no InfoObjects, if I move a couple of InfoObjects from the right to the left, where do these Objects in the left eventually go?
    A: these are fields of CS (left part) and as I said before they will go to data target.
    Q: 5. what is the relationship between the “Communication Structure” in 4 and 1? Or any relationship between a) and b) as a whole?
    A: CS in 4 just shows IOs that will be transferred to data target. CS in 1 also shows how values for CS IOs are to be fed and transformed.
    Best regards,
    Eugene
    Message was edited by: Eugene Khusainov

  • What did the installation of CorelDRAW Graphics Suite X6 changed in the system because after that Firefox crashes every time when opened?

    My system worked normally but after I installation CorelDRAW Graphics Suite X6 Firefox crashes every time I try to open it. I've tried disabling plugins and add-ons but with no success. Reinstallation of Firefox hasn't helped. But as I this has happened to me on a couple of other computers too, I've been able pin point the source of problem to installation of CorelDRAW Graphics Suite X6 (and earlier versions, too).
    Firefox can be opened without problems in safe mode or in Windows XP SP3 compatiblity mode. Does Firefox use some different system components then?
    I am using 32-bit Windows7 and latest version of Firefox.

    It is possible that the CorelDRAW program installed extra fonts on your computer and that Firefox is having a problem with one or more of them.
    You can use one of these to start Firefox in <u>Safe mode</u>:
    *On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
    *On Mac, hold down the Options key while starting Firefox
    *Help > Restart with Add-ons Disabled
    *https://support.mozilla.org/kb/Safe+Mode
    You can also do a malware check with some malware scanning programs on the Windows computer.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    *http://www.superantispyware.com/ - SuperAntispyware
    *http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
    *http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    *http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    You can also do a check for a rootkit infection with TDSSKiller.
    *http://support.kaspersky.com/viruses/solutions?qid=208280684
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • The Windows Installer does not permit installation from a RDP connection.

    Hello!
    Today when was installing Exchange 2013SP1 onto one of my virtual machines I got the following error:
    This error has suprised me in a lot of ways: 1) it was my 10th, or 20th or ... installation of Exchange on to the same test VM and this error has never arised before, 2) it's rather tardy error as Step1 and Step2 completed successfully in spite of
    "The Windows Installer does not permit installation from a RDP connection." 3) I was using
    Virtual machine connection - not RDP connection!
    Thank you in advance,
    Michael

    Hello!
    Today when was installing Exchange 2013SP1 onto one of my virtual machines I got the following error:
    This error has suprised me in a lot of ways: 1) it was my 10th, or 20th or ... installation of Exchange on to the same test VM and this error has never arised before, 2) it's rather tardy error as Step1 and Step2 completed successfully in spite of
    "The Windows Installer does not permit installation from a RDP connection." 3) I was using
    Virtual machine connection - not RDP connection!
    Thank you in advance,
    Michael
    It looks like the installation files are being shared over a terminal services connection (based on what you are saying, I'm guessing you're using Hyper-v and it's using TS to present the files).  I always run into mixed results when I run installs from
    a path not local to the server.  Can you copy the install paths locally and rerun setup?
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

  • Does the Adobe Reader installer modify folder permissions at install time?

    From the behavior I have observed, it does; however I would like to confirm this with someone. If so, is there a specific reason this is being done and what proccess is being used, for example does the installer remove all permissions from the folder then add permissions or does it remove only the users that are not needed then add new ones? Also there are two custom actions in the MSI that I am curious about, LockFilePermissions and LockRegPermissions. It appears these are the actions that are removing the default permissions. Can anyone provide any insight as to why this is needed?

    Anyone?

  • Does the HP ENVY dv7-7240us support two internal hard drives?

    Does the HP ENVY dv7-7240us support two internal hard drives?
    Is this something we can expand ourself without requiring a special chasis?

    Hi,
    Yes, it supports TWO internal HDD's. You may need something similar to this:
        http://www.newmodeus.com/shop/index.php?main_page=page&id=39
    the following video will give you some ideas:
       http://www.youtube.com/watch?v=cLP8kjeLW-Q
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Is there any way to get the firebug icon back into the "add-on" bar - it's really bothersome to activate it through the dropdowns?

    not sure when this changed but the firbug icon used to be on the bottom of the window and how the only way to activate it is through the dropdowns. This is really cumbersome and I am not sure if I just missing something to make the icon show up in th

  • Component should not be made available for backflush during final Backflush

    Hi, In REM Scenario, during final backflush system explodes and proposes all components in the header material for GI backflush. Is there any way we can restrict certain materials not to appear for GI backflush and that can be posted at later time. y

  • Huh bu i am in the same directory.

    When i try and run the appletviewer HelloWorldApplet. From the same directory i have the applet in i get "I/O exception while reading: J:\HelloWorld (The system cannot find the file specified)" drive j:\ is a mapped drive on my system, Can't see why

  • New here and have ???'s

    Hello, I'm new here and I have been thinking of getting Dreamweaver for some time now. I have been using MS FrontPage and a product that works off of it called FrontLook. I was told that MS FrontPage put in a lot of extra code that wasn't needed and

  • Installed Windows XP, No Boot Camp in Program Files

    i installed windows XP through boot camp this morning, but i wasn't able to install the drivers because i didn't have my OS X CD with me. i want to boot from OS X for now until i can get the CD, but under C:\Program Files there's no Boot Camp directo