Does the Undo command work in Finder anymore (Mountain Lion)?

I used to be able to Undo an accidental file move, etc. with a quick Command-Z. Not anymore. Is there a workaround, or some other option I am not aware of? Thanks.

It's a long shot, but here goes. My previous employer used a different email login scheme than the default Outlook suggestion. They used three letters followed by 4 numbers, XXXNNNN, instead of the first part of the email address [email protected] So, if you setup Oulook with the default settings, without correcting the login entry, it would not find the server.
Keep in mind that many employers specifically try to block the use of home computers with their exchange mail servers for security reasons. Your employer's IT group also have the option with Exchange server of remotely removing the email from your cell phone.

Similar Messages

How does the Convert Command Work Under the Catalogue Manager?

How does the Convert Command Work Under the Catalogue Manager?

My suggestion would be that you download the pdf version of the organizer help file:
http://helpx.adobe.com/pdf/elements-organizer_reference.pdf
Start with page 57 for catalogs.
I am sure you'll have a better understanding of backup/restore and converting when you understand what a catalog is.
Please come back with your questions afterward .

Does the TJ command work with Type3 fonts?

I'm not sure that the text showing TJ works with Type3 fonts.
Attached is a complete PDF file that illustractes the problem. See
how the A characters position are affected by the TJ command when
using the Type1 fonts but not the Type3. Is this a known issue? Is there a solution?
%PDF-1.4
%âãÏÓ
1 0 obj
<<
/Type /Catalog
/Pages 2 0 R
>>
endobj
2 0 obj
<<
/Type /Pages
/Kids
3 0 R
/Count 1
>>
endobj
3 0 obj
<<
/Type /Page
/Parent 2 0 R
/MediaBox[0 0 595.3 841.9]
/Contents 4 0 R
/Resources 5 0 R
>>
endobj
5 0 obj
<<
/ProcSet [/PDF /Text /ImageB /ImageC /ImageI]
/Font
<<
/F0 6 0 R
/F1 11 0 R
>>
>>
endobj
6 0 obj
<<
/Type /Font
/Subtype /Type3
/FirstChar 65
/LastChar 65
/Widths[93]
/FontMatrix[1 0 0 1 0 0]
/FontBBox[0 0 97 107]
/Encoding 7 0 R
/CharProcs 8 0 R
/Resources
<<
/XObject
<<
/Image65 10 0 R
>>
>>
>>
endobj
7 0 obj
<<
/Type /Encoding
/Differences[65 /softA]
>>
endobj
8 0 obj
<<
/softA 9 0 R
>>
endobj
9 0 obj
<< /Length 56 >>
stream
93 0 0 0 93 107 d1
q
77 0 0 107 0 0 cm
/Image65 Do
Q
endstream
endobj
10 0 obj
<<
/Type /XObject
/Subtype /Image
/Width 23
/Height 32
/BitsPerComponent 1
/ImageMask true
/Filter /FlateDecode
/Length 63
>>
stream
x^ûÿhþÿþ1Àÿ?õ dQÿÃÂjì?ÔÈÐ?ùütð?ûajoþßDìÿ À @e
endstream
endobj
11 0 obj
<<
/Type /Font
/Subtype /Type1
/BaseFont /Times-Roman
>>
endobj
4 0 obj
<< /Length 238 >>
stream
q
0.072 0 0 0.072 0 0 cm
BT
/F0 1 Tf
1000 2100 Td
[(AAAA)]TJ
ET
BT
/F0 1 Tf
1000 2000 Td
[(A)100(A)100(A)100(A)]TJ
ET
BT
/F1 107 Tf
2000 2100 Td
[(AAAA)]TJ
ET
BT
/F1 107 Tf
2000 2000 Td
[(A)100(A)100(A)100(A)]TJ
ET
Q
endstream
endobj
xref
0 12
0000000000 65535 f
0000000019 00000 n
0000000078 00000 n
0000000156 00000 n
0000001215 00000 n
0000000279 00000 n
0000000399 00000 n
0000000656 00000 n
0000000727 00000 n
0000000768 00000 n
0000000882 00000 n
0000001130 00000 n
trailer
<<
/Size 12
/Root 1 0 R
>>
startxref
1513
%%EOF

No Mac available ATM. Will do this for you sometime over the
next 3 days.

Problem with the say command in Mac OS X Mountain Lion

When using the say command in mac osx lion if you have the phrase "Cinco de Mayo" in a line everything after it is dropped. Why?

Did you follow the instructions HERE?

Does the setpref command work with Mac Shockwave 11 player?

Hi,
I have an existing application that makes use of setPref and
getPref commands to store the user state.
Recently, we have had users reporting problems and I have now
narrowed the scope of the problem down to Mac users who have the
latest Shockwave 11 player. My testing has shown that these systems
seem to completely ignore calls to setPref() - that is, no txt file
is ever written to the user's Prefs folder....
Can someone please confirm that this functionality is not
broken on Mac Shockwave 11 machines?
I have been using the following page as a convenient test:
http://www.director-online.com/buildArticle.php?id=329
At the bottom is a small Shockwave movie that uses
setPref/getPref to save a 'bookmark'. Can Mac users please reply to
this thread and confirm that this is working for them?
Any other suggestions would also be appreciated...
Thanks,
Ben.

No Mac available ATM. Will do this for you sometime over the
next 3 days.

HT204003 does the passbook app work on the iPhone4 because I downloaded the apps for it but I continue to see the original screen for the app and I can't find passbook in my settings.

does the passbook app work on the iPhone4 because I downloaded the apps for it but I continue to see the original screen for the app and I can't find passbook in my settings.

Some time in the future (Starbucks Tweeted the other day "by the end of the month") the Starbucks app will be Passbook enabled. When that time comes, you will log into the app with your credentials, select your Starbucks card, and you should be given an opportunity to add that card to Passbook at that time. From there, whenever you walk into a Starbucks the alert will be displayed on the lock screen, just slide your finger across the the alert and show your card to pay.
Now, I have not seen the new app, of course, so I am just speculating based on how the Walgreens, Fandango and Target apps work. Also, I am not sure yet if this will work in any Starbucks, or just the one that you consider your favorite, or primary location. Again, that is just based on how the other apps seem to work. We'll see.

HT204053 does the icloud service work in middle east(lebanon) area or just in USA?coz it isn't working on my mac;it logs in,but when clicking any category like calendar,mail or find my iPhone,it tells"service unable to load,send a report..."

does the icloud service work in middle east(lebanon) area or just in USA?coz it isn't working on my mac;it logs in,but when clicking any category like calendar,mail or find my iPhone,it tells"service unable to load,send a report..."..... so, the problem is..????

Wow, just posting and it seems that there is a solution that is working for me...
What I've did is I turned off iTunes Match on my iPhone, then turned in on again. Now in my iTunes library on my mac I can get the duplicates to be matched or uploaded to iCloud with a right-click, add to iCloud. iTunes Match starts to check the songs and everything is done correctly. Pretty nice!

Does the new command 2 binary format work with Apple Push Notification Service? I receive an invalid response status code of 128.

Does the new command 2 binary format work with Apple Push Notification Service? I am sending 2 messages with the same payload to 2 different devices. None of the messages display on either of the devices. It seems that at least 3 should have been displayed. For my first device, I received a response with an invalid status code of 128 and the message identifier is 2 indicating that the first message was OK. However no message was displayed on the phone. For the second device, I did not receive any error response, but no message was displayed on the device.
Does ANS perform any validation on the message identifier? The Local and Push Notification Programmin Guide says the message identifier is:
An arbitrary, opaque value that identifies this notification. This identifier is used for reporting errors to your server.
I know that the device tokens are valid because the same tokens work when I use the legacy basic or enhanced formats. The phones display the messages correctly when I send to ANS using the old ANS message format.
Here is the data and the response:
Sent to ANS: 2 0 0 0 158 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 119 141 5 0 1 5 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 119 141 5 0 1 5
ANS returned an error: 8 128 0 0 0 2
Sent to ANS: 2 0 0 0 158 1 0 32 4 239 182 26 13 237 170 136 41 243 181 57 120 208 135 19 101 102 212 70 55 244 251 255 160 125 82 9 10 143 72 17 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 5 4 0 4 83 7 119 147 5 0 1 5 1 0 32 4 239 182 26 13 237 170 136 41 243 181 57 120 208 135 19 101 102 212 70 55 244 251 255 160 125 82 9 10 143 72 17 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 6 4 0 4 83 7 119 147 5 0 1 5
ANS did not return a response.

Hello, can you please help me ?
You specified sample payload here:
TerrellFromLockhart wrote:
I finally got this to work. The picture in the Programming Guide is very confusing. The solution was to prefix every message's frame data with command 2 and that messsage's frame data length. Here is a sample:
ANS frame: 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 4 4 0 4 83 7 199 195 5 0 1 10
About to read response at Thu Feb 20 15:40:20 CST 2014
SocketTimeoutException
2 - is clearly command
0 0 0 77 - frame length
1 - item Id
what's 0 32 ? According to this page https://developer.apple.com/library/ios/documentation/NetworkingInternet/Concept ual/RemoteNotificationsPG/Chapters/Commu…
Item id should be followed by item length. But item length is obviously greater than 32 because device token's length is 32. Can you please explain why 0 32 were used? and do you have any insight on item id meaning ?

How does the .accept() method work?

Hi,
I have checked the source code of the ServerSocket implementation that comes with the jdk.
I tought I was going to find some type of loop. However I found nothing like that! so how does the accept method work.
I mean when we call the .accept() method, the thread in which the socketServer is initialized gets stoped untill a new client connection is recieved! how is this actually managed?
Regards,
Sim085

At a guess, the accept call that Java makes, relies on the OS system call through JNI. accept would then block until a new connection is present if you are using blocking.

How does the time machine work

how does the time machine work....I need to find an older version of a document...

Hi mogburn,
Time Machine is part of the System software, not a feature of the word processing and page layout application, Pages, the topic in this community.
That said, Time Machine is pretty easy to get into.
In the Finder, open the folder containing the current version of the file.
Select the file, then click on the Time Machine icon in the menu bar and choose Enter Time machine.
The folder window will move to the center of the screen, and two arrows will appear near the lower right corner of the window.
Click the one pointing back to go back in time, and the one pointing toward the front (of the computer) to return to the present. The display will stop at each saved version of the file along the way.
Need more details? Try asking in the Mac OS X v10.6 Snow Leopard community.
Regards,
Barry

How does the ping command get the IP address?

I am running Windows 7 and when I do a ping command using a host name, the ping command works fine and returns the correct IPV4 address and is able to send and receive data using that address.
On the other hand, if I write my own program and use either GetAddrInfo or GetAddrInfoEx. neither of them give me the result I expect. GetAddrInfo fails with a host not found error and GetAddrInfoEx gives me back a return code of zero, but the ai_addr field
of the returned structure is garbage.
Do any of you out there know how ping does it? Because if ping can do it, I should be able to also.
Sid Schipper GA/RSG/Network Engineering Software Developer

Never mind! The question came about because of my stupidity. GetAddrInfoEx was returning the correct IP address, but it was being returned as a double-byte character string and I was interpreting it as a single-byte character string, Oops!, my bad!, sorry
to bother all of you and Thank you for your responses.
Sid Schipper GA/RSG/Network Engineering Software Developer

DOES THE APPLE REMOTE WORK WITH THE IPOD TOUCH..? WITHOUT A DOCK..

HI
DOES THE APPLE REMOTE WORK WITH THE IPOD TOUCH 5TH GEN..? WHITHOUT A DOCK..??
THANKS ANYONE

This Apple remote requires a dock since this remote uses IR and the iPod does not ha IR capibility,.
Manufacturer Information
Apple Remote with iPod and iPhone: Please note a Universal Dock is required in order to use the Apple Remote with your iPhone or iPod.
http://store.apple.com/us/product/MC377LL/A/apple-remote?

Does the apple remote work with the ipod touch 4th gen?

Does the apple remote work with the ipod touch 4th gen?

Yes, but it also requires Apple's Universal Dock to go along with it. Otherwise, it is useles.
B-rock

HT201335 does the Ipod touch work with the airplay mirroring

Does the Ipod touch work with airplay mirroring?

No. Only iPhone 4S and iPad (2nd or 3rd Gen) as it requires more processing power. You can still use airplay with your device though.

Does the ipod video work with the original ihome?

does the ipod video work with the original ihome?

Welcome to Apple Discussions!
If you mean this one...
http://www.ihomeaudio.com/products.asp?productid=10015&deptid=1003
Them yes. I am using one myself. You may want to purcahse these if it does not come with them (depending on how old it is)
http://www.ihomeaudio.com/products.asp?productid=10016&deptid=1000
btabz

Does the Undo command work in Finder anymore (Mountain Lion)?

Similar Messages

Maybe you are looking for