Does the X-Fi I/O Drive work in Vis

I've been looking through the forums for about 2 hours now and can't find a good answer. I know there are a lot of problems in Vista but I don't understand why the whole I/O dri've would not work. I've read that you should see red-lights at the optical in and out but I don't see those. But I didn't know if these lights are on as soon as you turn on the computer or if they only come on once the driver is initialized in Vista.

Only the output port for optical is supposed to show the light. And I think it will only show if it's actually sending anything.
I can tell you that with the latest drivers and the upax software installed this is what works for me on the I/O Dri've:
-Midi In/Out
-Optical In
-Aux In (EXTREMELY low volume level even when source is set to high and mixer is set to high on the Aux)
-Headphones work (auto detects when plugged, changes to headphones and mutes speakers)
I haven't tried the Mic In yet.

Similar Messages

  • Does the X-FI I/O Drive work with the X-FI Extreme Gamer Card?

    I have the basic card not the "Fatalitiy" model? Thanks. I need to know before I but the I/O Dri've.

    If the card has a connector like this: Yes, if not then, no.

  • I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

    I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

    The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works.  Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up.  Try them again. 
    Google your particular isp, and ipad and many times you will find the exact settings needed for your isp.  Or tell us here, and soneone else may be on the same isp.  Some mail services need you to change a port, or have a unique name for the outgoing server.  
    Kep trying.

  • Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

    Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

    It's a VGA adapter. Nothing special about that. If your Samsung monitor supports VGA then it will work.
    But why not go completely digital and use a Mini DisplayPort to HDMI adapter to skip the analog conversion? It also supports passing audio over HDMI.
    About Mini DisplayPort to HDMI adapters

  • In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame...

    In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame. To help protect the security of information you enter into this website, the publisher of this content does not allow it to be displayed in a frame ". On Chrome I get nothing but loading.

    Hi,
     This error is generally specific to Internet Explorer and has two possible causes. The most likely explanation is that your browser has unusual browser security settings. I would recommend you try
    resetting your security settings to defaults (varies by version but all essentially the same). You may also have to turn off
    Protected Mode which is enabled by default on some systems. If you’re seeing this error (or a version of it) outside Internet Explorer, you may have a server-level setting that is preventing your content from being framed.
    Reference:https://social.technet.microsoft.com/Forums/exchange/en-US/1460c5a5-6242-4402-9f6b-bc581bf56478/content-cannot-be-displayed-in-a-frame-when-trying-to-add-item?forum=sharepointgeneral
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • Does the ipad 2 support flash driver ??

    Hi am wondering does the ipad 2 support flash driver ??? i purchased an adapter for that purpose
    if yes so how can i use it ? i mean how can i view my music ,photo and else in my flash driver via ipad 2 ?

    Any discussion of jailbreaking an iPad on this forum is against forum rules.  If you want to take the chance of bricking your iPad and negating your warranty with Apple, that's your choice.  But you're on own and won't get ANY support from us users who would never think of jailbreaking our devices.

  • How does the ituns app on my ipad2 work?

    How does the itunes app on my 1pad2 work?

    The iTunes app on your iPad is just a portal to the iTunes Store.  To play music or videos, use the Music App and the Videos App.
    Here's a link to iPad iOS5 User Guide

  • Does the QT MPEG2 Playback Component install & work with QT X ?

    I am installing a new iMac with Snow Leopard.
    Does the QT MPEG2 Playback Component install & work with QT X ?
    (btw, I have already done the optional install of QT7 from the SN DVD).

    Does the QT MPEG2 Playback Component install & work with QT X ?
    I cannot get "muxed" MPEG2 content (e.g., VOB) file to load in QT X but both QT 7 Pro (with usual audio limitations) and MPEG Streamclip still function normally under Snow Leopard. (Since I don't normally use QT X, I had to actually run a quick test to see what would happen and haven't really performed any real tests. So take my comments with a grain of salt at this time.)
    with such files on my PB Pro.

  • Does the Wacom Intuos Creative Stylus 2 work with Adobe Draw

    Does the Wacom Intuos Creative Stylus 2 work with Adobe Draw?

    IP,
    I believe you should ask over here:
    Adobe Illustrator Draw

  • Does the new command 2 binary format work with Apple Push Notification Service? I receive an invalid response status code of 128.

    Does the new command 2 binary format work with Apple Push Notification Service? I am sending 2 messages with the same payload to 2 different devices. None of the messages display on either of the devices. It seems that at least 3 should have been displayed. For my first device, I received a response with an invalid status code of 128 and the message identifier is 2 indicating that the first message was OK. However no message was displayed on the phone. For the second device, I did not receive any error response, but no message was displayed on the device.
    Does ANS perform any validation on the message identifier? The Local and Push Notification Programmin Guide says the message identifier is:
    An arbitrary, opaque value that identifies this notification. This identifier is used for reporting errors to your server.
    I know that the device tokens are valid because the same tokens work when I use the legacy basic or enhanced formats. The phones display the messages correctly when I send to ANS using the old ANS message format.
    Here is the data and the response:
    Sent to ANS: 2 0 0 0 158 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 119 141 5 0 1 5 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 119 141 5 0 1 5
    ANS returned an error: 8 128 0 0 0 2
    Sent to ANS: 2 0 0 0 158 1 0 32 4 239 182 26 13 237 170 136 41 243 181 57 120 208 135 19 101 102 212 70 55 244 251 255 160 125 82 9 10 143 72 17 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 5 4 0 4 83 7 119 147 5 0 1 5 1 0 32 4 239 182 26 13 237 170 136 41 243 181 57 120 208 135 19 101 102 212 70 55 244 251 255 160 125 82 9 10 143 72 17 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 6 4 0 4 83 7 119 147 5 0 1 5
    ANS did not return a response.

    Hello, can you please help me ?
    You specified sample payload here:
    TerrellFromLockhart wrote:
    I finally got this to work. The picture in the Programming Guide is very confusing. The solution was to prefix every message's frame data with command 2 and that messsage's frame data length. Here is a sample:
    ANS frame: 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 4 4 0 4 83 7 199 195 5 0 1 10
    About to read response at Thu Feb 20 15:40:20 CST 2014
    SocketTimeoutException
    2 - is clearly command
    0 0 0 77 - frame length
    1 - item Id
    what's 0 32 ? According to this page https://developer.apple.com/library/ios/documentation/NetworkingInternet/Concept ual/RemoteNotificationsPG/Chapters/Commu…
    Item id  should be followed by item length. But item length is obviously greater than 32 because device token's length is 32. Can you please explain why 0 32 were used? and do you have any insight on item id meaning ?

  • How does the fade in or fade out works on a apple loop

    how does the fade in or fade out works on a apple loop

    What does the manual say about it?
    http://help.apple.com/logicpro/mac/10/#lgcpf7c0ee6c

  • Does the new Macbook Pro 13 2011 work with the Intel SSD?

    I've been trying to upgrade my macbook pro to an ssd (using stock original 5400 rpm 320 gb HDD) but so far I've been reading for like 2-3 hrs and came to a conclusion. Intel is the most reliable and most highly recommended. However, Intel SSD doesn't work with the new Macbook Pro 13" & 17" because of some cabling SATA III issues. Does the issue still remain or has it been fixed? If it hasn't been fixed, what is the current most highly recommended and reliable and best in terms of speed, reliability, and just...best SSD available that works best with the 2011 MBP? Can anyone help me out? Ive been reading that OCZ and others are faster than Intel but less reliable (higher failure rates) and MBP can't take advantage of faster 6/Gbps RAID III or something. help me!!! Should I just wait?

    If you search the web, you will predominately read about problems, not good experiences.
    I don't believe Intel is any less subject to issues, than the Sandforce SSD drives.
    Buy from a reliable source with a good return policy and warranty.
    OWC is well regarded.

  • Why does the highlight feature seem not to work about 1/2 the time in various ibooks.  I'm trying to take notes and about 50 pages into a book the highlight feature stopped working.

    I've long noted that the highlight feature in ibooks is clunky and fairly limited in it's note-taking features, but the last two books I've read I've had trouble getting the highlight feature to work at all.  I click and drag over text and nothing happens.  I try with command depressed and nothing happens.  If I double click a bunch it will eventually highlight one word, but nothing more.  What gives?
    Also, not to be snarky, but why can't I seem to find a button that would read text to speach for me?  How do blind people use this service, or illiterate, or dyslexic, or people like myself who can learn far more from hearing then from reading. 
    And why does the text of a book often render so that it's haf cut off of the page?

    There is a button for speech within the iBooks menu. Edit > Speech. You might be better off buying Audiobooks. You can get them from the iTunes Store or Audible.com

  • Does the lightning to 30 pin adaptor work in speaker docks?

    My old 3rd Generation iPod stopped working (the round scrolling dial won't work), so I bought a new 7th generation iPod last week.  I realized I couldn't play it on my fairly low-end Memorex speaker dock, so I got one of those $30 lightning-to-30-pin adaptors.  The new iPod charges, but it won't play music in my speakers.  Is this a problem with my particular adaptor, or do those not work to play music?  I am hoping there is some kind of setting adjustment I can make...  Thanks!

    There are reports that 30-pin adapter does not work in all types of speaker docks. If it should, there should not have any trouble interfacing it with the ipod. If you are planning to get a new dock, check with the store first if it is compatible before you purchase it. Cheers!

  • How well does the new Apple 24" LED Display work?

    Hey guys
    Im thinking of purchasing a 24" LED Display from Apple, just because I need a bigger screen to work on, as I edit photos, and film and I've been looking into one for awhile. Buck for buck, is this monitor a good companion to the unibody MacBook pros with the mini display port? Of course, its looks all glitz and glamour on the mac site but has anyone worked with these things hands on? What are the pros and cons?

    The display is very easy to use; considering you'll probable be plugging in the display multiple times per day this is really important.
    The built in display is LED lit (cool light) sense the 24" is also LED lit (cool light), there is a greater consistency in color between the two displays.
    Traditional LCD displays have a warmer glow due to using a fluorescent tube. Trying to go between LED and and fluorescent tube displays could drive you insane. especially if your using both displays at the same time for photography, where color can be very important.

Maybe you are looking for