Does the X58 boards support intel 2 core quad 775?

i have a question the X58 boards support 2 core quad processors? because it says 45 nm support.

For future reference, look at the socket of cpu.
Core 2's are socket 775 or LGA 775, X58 is for Nehalem or better Bloomfield cpu's, new architecture and has socket 1366 or LGA 1366.
The numbers stand for the number of pins found on the bottom of the cpu, the core 2's had 775 contactpoints, the new Nehalem 1366.
The 45 nm you refer to is the productionproces on which it is made on, e.g. 45 nm.
The smaller this number becomes, the next step is 32 nm, the more processors can be cut from a wafer.

Similar Messages

  • AirDrop on my MacBook Pro but not on my Desktop MacPro (Quad-Core Intel Xeon). Does the desktop not support it?

    AirDrop on my MacBook Pro but not on my Desktop MacPro (Quad-Core Intel Xeon). Does the desktop not support it? What gives?

    See if your Mac model supports it:
    http://support.apple.com/kb/HT4783
    Thanks ... Ken

  • I have leopard and want to upgrade to lion. I have a macbook about 3 years old and wonder if I should just get a new macbook pro ($$$) instead. Is it worth the headache to upgrade to snow leopard and then lion? How does lion perform on an intel core duo 2

    I have a macbook about 3 years old running leopard. I amwondering ifitwouldbeworth the trouble to install snowleopardand then lion ($60.00) or just buy a new macbook pro ($$$$$$). How does lion perform on an intel core 2 duo processor?

    I have Lion installed on a Mini with a C2D processor. The same Mini has Snow Leopard on another partition and there is no noticeable difference in operational speed between the two OS's. But compared to my new MBPro 17" with a 2.83GHz i7, the Mini running Lion is noticeably slower. So if you can afford anew MBPro, then I would get it because you will probably be unhappy with the performance of Lion on the older MBPro. The other benefit of getting a new MBPro with Lion is that if you have any Power PC applications currently on the old MBPro, which will not operate in Lion, then you still have the ability to use them. Many users got stung by upgrading to Lion, only to find they could no longer use the older PPC applications.

  • Can the 2.7 GHz Intel Core i5 in a mid2011 27" iMac be up graded to the 3.4GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz

    can the 2.7 GHz Intel Core i5 in a mid2011 27" iMac be up graded to the 3.4GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz

    Yes, but it isn't easy. Read http://www.dslreports.com/forum/r27364872-iMac-CPU-Upgrade and the links in there before starting that project.
    Allan

  • Does K8D Master-FT support Dual core Opteron?

    Hi,
    Does K8D Master-FT support dual core Opteron? I saw the latest BIOS was released at 2003/12/11 and said to support for all series of AMD Opteron(up to 248, SC, 2.2GHz/1M).
    Thx, Xuekun

    Sorry I only looked after his question.
    The entire K8D-Master3 series has support for it: >>Link<<

  • [Please Help]Does MSI Axis 945G support intel core2 duo T7600?

    I have an idle CPU  intel core2 duo T7600,so I am considering  buying  an AXIS 945GM to let it work.
    I have a question ,does MSI Axis  945G support intel core2 duo T7600?
    I checked the CPU suppot list on MSI website,I just found it suppots upto T7400.
    Can I flash the new BIOS v1.23  to support T7600?
    thank you!

    According to the CPU Support List, this won't help.  The best thing to do would be to contact MSI Technical Support.  Maybe they can give you a more definate answer:
    http://ocss.msi.com.tw/

  • Does the 6600GT-VTD128 support video capture?

    Hi,
    I recently purchased an MSI 6600GT-VTD128 video card.  The product information seems to suggest that the card has video input capabilities, and there is an adapter that plugs into the card that has a number of connections, one of which is labeled S-Video in.  However, I haven't been able to get any video capture to work.
    Does the card actually support this functionality?  If not, what are the video input connections for?  If so, is there some documentation as to how to set it up?  
    So far, I tried installing the video capture drivers that come with the card.  I checked the manual.  I checked the MSI web site FAQs.  And I searched the forums.
    Any help would be greatly appreciated.
    Thanks,
    Daniel

    Thanks Richard.  Yes I do have a breakout cable like that.  Actually, I described it in my original message.  So, I am guessing from your message that you believe that the card should have the capability to capture video.  
    In my original message, I asked if there was any documentation on setting up the card for video capture.  The manual does not describe the procedure, nor does the MSI web site.  
    There are drivers on the CD that claim to be for video capture, but they had no effect when I installed them.  In fact, there appears to be no way to tell whether the drivers were actually installed successfully.
    If anyone out there has successfully used this card for video capture, please let me know.

  • Does the cannon mx410 support ipad printing of notes from the notepad

    Does the cannon mx401 support iPad (Via wi-fi) printing from the notepad area?????
    I need help getting mine to operate..
    .thnx
    . Bea

    According to the link below that printer doesn't support Airprint.
    See requirements for AirPrint and printers that support AirPrint here:
    http://support.apple.com/kb/ht4356
    You may be able to print some content using a printing App from the App Store. See Print n Share, etc.

  • Does the macbook pro supports the logitech gamepad 510/710? I't doesn't recognize it

    Does the macbook pro supports the logitech gamepad 510/710? I't doesn't recognize it.
    Is for playing to the FIFA 2012 for Mac

    juliafrancine wrote:
    I've tried looking for the install cd for it but I can't find it, now I'm starting to wonder if it even had one.
    No.  10.7 never came one a disk.  Read this:
    Restoring iLife applications after Internet Restore of OS X Lion
    If you reinstall Lion on a new Mac that shipped with OS X Lion installed, on an erased or replaced hard drive, you can download iPhoto, iMovie, and GarageBand from the Mac App Store.
    After installation, start from Lion.
    Double-click the App Store icon in the dock.
    Enter your Apple ID and password.
    Click Purchases.
    If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
    You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to compete installation of your applications.
    http://support.apple.com/kb/HT4718

  • Does the ME3400 switch support MDI/MDI-x autocross

    Does the ME3400 switch support MDI/MDI-x autocross? I recently experienced  a situation where when the switch was set to a fixed 100 Full duplex and the outboard device selected the wrong pair, they would never link.
    Is MDI/MDI-x only supported on auto-negotiation?

    “Thank you for your question.  This community is for Cisco Small Business products and your question is in reference to a Cisco Elite/Classic product.  Please post your question in the Cisco NetPro forums located here: http://forums.cisco.com/eforum/servlet/NetProf?page=main  This forum has subject matter experts on Cisco Elite/Classic products that may be able to answer your question.”
    - Switches ----> Network Infrastructure Forum http://forum.cisco.com/eforum/servlet/NetProf;jsessionid=E0EEC3D9CB4E5165ED16933737822748.SJ3A?page=Network_Infrastructure_discussion

  • Does the iPhone 5s support LTE Advanced?

    ihave iphone 5s but
    Does the iPhone 5s support LTE Advanced?

    Galadari wrote:
    Does the iPhone 5S support LTE Advanced
    I assume you mean Voice over LTE (VoLTE)? If so, I do not believe it does. It certainly doesn't with my carrier (Verizon).

  • HT6154 Does the iPhone 4s support Blue Tooth?

    Does the iPhone 4s support blue tooth?

    But not all Bluetooth profiles are supported. What is it you wish to do/connect to via Bluetooth?

  • HT204387 Does the IPhone 4S support NFC technology for Bluetooth pairing?

    Does the IPhone 4s support NFC technology for Bluetooth pairing.

    NFC and bluetooth are not the same thing.
    The iPhone (no currently existing model) does not have the hardware required for NFC.

  • Does the mozilla OS support sony xperia tipo(single sim)?

    Does the mozilla OS support sony xperia Tipo(single sim) ?
    If yes how would i be able to install it in my mobile phone and will it function properly and smoothly ?

    You can get start from here:
    *https://developer.mozilla.org/en-US/docs/Mozilla/Firefox_OS/Porting
    *https://developer.mozilla.org/en-US/docs/Mozilla/Firefox_OS/Preparing_for_your_first_B2G_build
    *https://wiki.mozilla.org/B2G/Porting
    btw, This is support forum, we dont handle this type of question, however you can ask porting related help at b2g mailing list or [https://www.mibbit.com/?server=irc.mozilla.org&channel=%23b2g irc channel].
    *[email protected]
    *irc://irc.mozilla.org/b2g

  • Does the new IPAD3 support the 3G in Egypt?

    does the new IPAD3 support the 3G in Egypt?

    The New iPad supports 3G world-wide wherever there is a local provider of iPad data plans and iPad micro sim cards. Read the specifications. http://www.apple.com/ipad/specs/
    So the question really is, are there 3G providers in Egypt who support the iPad?

Maybe you are looking for

  • Questions about master-detail update and delete!!

    I have created a view object with two entity objects. These two entity objects map master-detail tables in DB. I want to update both tables when the user input, and delete the record in detail table (keeping master table unchanged) when the user clic

  • Error DBIF_PGNT_SQL_ERROR while activating 0MATERIAL

    Hi All,    I am stuck with a problem. I added 0MATL_GRP_2 in 0material as attribute and did changes in R3 for the same. Then I replicated data source 0material_attr and changed transfer rule while activating i got error DBIF_PGNT_SQL_ERROR  : SQL err

  • Lov problem

    Hello i am facing an error while running a form FRM-30187: Size of CHAR column in record group must be between 1 and 2000. Record Group PATIENT Form: DIET_PLAN_SCHEDULE FRM-30085: Unable to adjust form for output. Please help

  • Airdrop not being seen on laptop

    My macbook with the mavericks os is not finding airdrop- it just hangs trying to fetch. Is there anything I can do to fix this?

  • Function Module used to updating URL attachment in RE80

    Hi there ! I'm currently developing a program in RE module . I'm finding off ways on how to auto update my URL attachment in RE80 , someone told me to use the function module SO_OBJECT_UPDATE to do it , but then I don't know how it works ? Can someon