Does the XMLP full or partially support the Xpath and XSLFO syntax?
Does the XMLP full support the Xpath and FO syntax? or partially? Thanks
Hi Robin
OK, so hopefully you are not leading me into a trap here :o)
There are two parts to this question:
1. XPATH - we support as much of the XPATH spec as the Oracle XDK supports ie we rely on the XDK for our transformation engine so as long as they support what you are trying to do then we do. There are a few gaps and we have plugged those in the XMLP layer. So the short answer is yes.
2. XSLFO - we allow you to use XSLFO in your template. The XMLP engine supports much of the standard but there are a few gaps. the next set of docs will layout exactly what we do support in the spec.
Regards, Tim
Similar Messages
-
Does Adobe Photoshop Lightroom version 4 support the Olympus Evolt E-500 camera?
Does Adobe Photoshop Lightroom version 4 support the Olympus Evolt E-500 camera?
I know the vertsion 5 supports it, but I am on a very tight budget and version 4 is still available via Amazon. If anyone knows if version 4 supports the Olympus Evolt E-500, please let me know ASAP!
Thank you!
Charles WallaceThe Olympus EVOLT E-500 has been supported since Lightroom 1.0
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html -
Does the GeoRaster method SDO_GEOR.exportTo support the Erdas IMG format?
Hi Everyone,
Does the GeoRaster method SDO_GEOR.exportTo support the Erdas IMG format, and SDO_GEOR.exportTo method can export what maximum amount of data?
Best Regards,
LinLin, thanks for your suggestion. the gdal-georaster integration is a great one for GIS and professional usages and can do what exportTo can not do even though it was just recently available. note though, all existing georaster functions, including exportTo, are internally built inside the database server from ground up. this enables users to fully leverage the power of enterprise database and grid computing.
thanks
jeffrey -
page size that I have to put my site to see the same on a computer supports both laptop and a desktop computer ?
The viewport on a computer is adjustable by the user. iWeb sets the viewport width to the page width that you chose in the layout menu. No matter what the end user does, the page width is static and a reasonable compromise for the width of a web page that will be viewed on these devices is 980 to 1024 px.
Safari on iOS devices cannot set the viewport. The viewport on mobile devices is fixed and its width depends on the orientation of the device. The iPhone in portrait mode has a viewport width of 320px. This means that the 980px wide iWeb built page will be squashed down to about one third of its desired size making it unreadable and difficult to navigate.
Setting the viewport meta tag so that width equals the device width is a futile gesture since Safari on iOS will do that anyway. Its only useful if you add some initial scaling like...
<meta name = "viewport" content="initial-scale=0.7">
In the case of a 980px wide website, the initial scale is about 0.3 so any value higher than this will magnify the initial view of the site.
Here's an example of a 980px wide page that has been given and initial scale of 0.7 which allows an iPhone user to see one column of a two column layout... -
Understanding that the iPhone 5 won’t support simultaneous voice and data transmissions over Verizon LTE network will it ever be able to support VoLTE (Voice over LTE)? Could Apple add VoLTE support later on? It seems pretty clear the MDM9615 chip supports VoLTE but the baseband software by Apple does not. Could Apple add it to the baseband later on? When will Verizon turn-on/enable VoLTE?
Referral Link: https://discussions.apple.com/message/19614226#19614226Well in my research Verizon is already testing Voice Over LTE in select markets via a few news releases, and rumor has it that a few smartphones are already VoLTE ready. http://news.verizonwireless.com/news/2011/02/pr2011-02-09f.html
-
I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. up and going again?
Niel...
I installed Leopard 10.5.6 and then it upgraded to 10.5.8, when I installed it I had the old info saved to a "previous systems" folder, where most of my artwork, etc. were saved, I have a one terabyte Lacie backup that unfortunately did not work as it was intended...it saved the new info and not the old. I did look into the system preferences folder and found the classic file, of course it wouldn't launch...but I have the old G 5 startup discs and will try to do it as you stated. I will try also to move it out of the previous folders file to my hard drive and see how that works.
thank you for your time and help,
Dennis -
'We apologize for this inconvenience; however, your system does not meet the requirements necessary to view our media presentation'. I just received the iPad mini and get this message when I try to view videos. Does the full size iPad support video play back?
iPads have the same video requirements. What is the source of the video - streaming, download, from video camera?
Pad2, the new iPad Supported Video Formats & Movie Formats
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
Cheers, Tom -
Does the 27" iMac wireless card support 802.11a and n
does the iMac support the 5 GHz wifi format? How about the N spec?
I'm sorry but I don't understand this:
the unit supports 802.11a channels but it doesn't pick up anything.
Are you saying the iMac cannot connect wirelessly? And why would you be concerned that the very old 'a' standard may not be picked up? The latest standard is 802.11n, not a.
http://en.wikipedia.org/wiki/IEEE_802.11
So, is the iMac working wirelessly or not? -
Does the ipod nano 3g /vidoe support the playing of FM radio
Does the Ipod 3g/video support the playing of FM radio using products like Griffins IFM?
Hello there,
Does the Ipod 3g/video support the playing of FM radio using products like Griffins IFM?
Are you talking about this 3rd party accessory?
http://www.griffintechnology.com/products/ifm
If so, then yes it is compatible and will allow you to play FM Radio through your iPod.
B-rock -
Flash CS 5 only supports SAVING to the camera roll, not loading image from it. And it has no access to the camera to take pictures and access the image within the app.
Does Flash CS 5.5 do these things? There's no point in upgrading if it doesn't support these core feature that I need.Hi.
Just got an app rejected because the popover to select the pics from the camera roll on the iPad always appears on to-left corner, and the arrow doesn't point anywere, and should be pointing to the button which activated it. That "does not comply with the Apple iOS Human Interface Guidelines, as required...". On the iPhone there's no issue because it takes over the whole screen. More from the apple rejection message:
"Specifically, we noticed your app contained popover elements that didn't point to the element that revealed them. To avoid user confusion, a popover element's arrow should point to the element that revealed it."
So, thanks for including the CameraRoll functionality, but it will be useless in the iPad apparently
Any workaround to make it appear at a specific place when calling myCameraRoll.browseForImage() ?
Fernando -
Hi
I need to move my data from a time capsule that backuped my Macbook Air (which has been destroyed by liquid damage) to my Macbook Pro. The Air and the Pro both run Mountain Lion and I have a clean installation on the Macbook Pro.
I used Migration Assitant to move the data across but while I have back ups of my Air up to 24 hours before it was destroyed, the migration assistant only wishes to migrate data from the last full back up that it finds which is 2 months old.
Please can you advise how I can restore the latest data to my Macbook Pro.
Many thanks.please let me know the linksys device model number you are using ..
-
Does the 8.1.7 driver support the 7.4.3 database
I am upgrading an application that is running on JDK 1.1 and Oracle 7.4.3 using the Oracle thin driver to Java1.4. Shortly after installation the Oracle database will be updated to 8.1.7. Can I use the Oracle 8.1.7 thin driver, if not, what should I use.
This article helped me to solve mi instalation Ora 8.1.7 problems. I hope it helps you too.
Problem Description
They would kick off the install, you would see the blink of the install kicking off, then nothing. Other products installed fine (Winzip, Office 2000, Office XP) but not the Oracle Client. If you looked in the Task Manager you would see a process called JREW.EXE for a second then it would go away (as if terminated) immediately after executing the Oracle Client Setup.EXE.
Symptoms
The Oracle client software would not install Cause the install would not occure unless the Java code was updated.
Setup.exe does nothing on a machine because of a problem with the Java Runtime Environment. If this is the case, you need to download JRE release 1.1.8-008 from java.sun.com. Install it, then go to C:\Program Files\JavaSoft\JRE\1.1 and copy the bin and lib directories over the ones in the Oracle 8.1.7 client installation area here:
stage\Components\oracle.swd.jre\1.1.7.30\1\DataFiles\Expanded\jre\win32
Once done the setup.exe will install and the Oracle 8.1.7 client will install. If your Oracle client is older than this, you can download it at www.oracle.com <http://www.oracle.com> after registering (for free) with them.
Resolution/Workaround
download JRE release 1.1.8-008 from java.sun.com. Install it, then go to
C:\Program Files\JavaSoft\JRE\1.1 and copy the bin and lib directories over the ones in the Oracle 8.1.7 client installation area here:
stage\Components\oracle.swd.jre\1.1.7.30\1\DataFiles\Expanded\jre\win32
The Java code URL is:
http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html
Once done the setup.exe will install and the Oracle 8.1.7 client will install. If your Oracle client is older than this, you can download it at www.oracle.com <http://www.oracle.com> after registering (for free) with them. -
Does my version of Adobe CS5 Support the Canon 5d Mark II?
Hello,
I recently viewed a PeachPit video series that had screen shots and workflows for and from the Canon 5d Mark II HDSLR camera.
I've been having a few problems and issues getting started and wonder if perhaps I need to update my version of CS5.
Here is a screen shot that leads me to believe this. I distinctly recall on the PeachPit instructional videos are 5d appearing in this drop down menu.
Thanks,
MattMatt,
The screenshot you posted is for control and capture from DV and HDV devices; the 5D doesn't fit into this category. Since it is technically a "tapeless" camcorder, you are able to simply import the MOV files after you've copied them from your CF card to your hard drive. Technically, you could edit off the CF card, but you don't want to.
Just use the OS to copy the files to a hard drive (preferably one separate from the system drive), and then import the files into Premiere; there are many ways to do this, including from the PPro menu, by double-clicking the Project Panel, by dragging from a file browser window, or by using the Media Browser in Premiere. Moments after dragging them into the software, you'll be ready to begin editing. -
The minimum hardware configuration to support the Diameter credit control
Hello.
I'd like to know what the minimum hardware configuration is required to support the Diameter credit control application?Hello Mr.. Tarasenko,
According to the information found the diameter credit control application does not specify how many or which type units are bought/used and which items are charged. This is left to the company’s needs.
Diego Rodriguez
Cisco network engineer
Thank you -
Do any of the insruments in Logic pro 9 support the sostenuto pedal? I have Logic Pro 8 and none of the pianos there allow its use.
I'm using Prokeys88. Both sustain and expression pedals work as they should but not the third pedal. Is there a way to get
it to operate?RealPlayer can cause conflicts with Flash Player because it tries to assign EVERY TYPE of video or audio file to itself by default. I haven't used RealPlayer in years for that reason. It's an unnecessary program anymore. There are apps loike VLC media player that cna do EVERYTHING it does without conflicting with other apps like Flash Player.
With WIndows 8, Microsoft began embedding FlashPlayer themselves into Internet Explorer. Because of that, you cannot download and install it from here. You cannot uninstall it from Internet Explorer without removing a specific Windows Update first. And you cannot update it via this website. ONLY through Windows Update can Flash Player for Internet Explorer be updated.
That said, you probably DON'T have a virus that's causing the problems with Flash Player and Internet Explorer. Many, many websites are not "recognizing" the browser.
This is a known problem with Internet Explorer 11, which Microsoft has been aware of since October 18 when they released IE11 The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player.
So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.
Maybe you are looking for
-
Hi Does anyone know How to run twin monitors on a MacBook Pro operating on a Windows Server 2008 R2 ?
-
How to use array variable in Oracle
Hi, I want to use a array variable to store many string values i.e. values like ( "my name is hhhyy and i have a tack", "My data is valid" , "hhggg gaya hujjjs") currently all these values are in seperate variables , I want to consolidate them in one
-
Default key in internal tables
what is 'Default key'? for what type of internal tables it is used? Can you please explain with examples? Thanks a lot.
-
Which is better white iPhone5 or black iPhone5?
Which colour is better?
-
Special procurement type for BOM item
Hi Experts I am creating BOM using BAPI : CAD_CREATE_BOM_WITH_SUB_ITEMS There is no field to update Special procurement type for BOM item in this BAPI. Could you please suggest some way to update this. Thanks in Advance