Does the year of the macbook pro change the size of it?

i just ordered a 15 inch case and its about half a centimeter too small. i have a 2010 and the cover wont fit

Macbook Pro non retina version dimensions remain same for 2010,2011 and 2012 year models.
Check the "Dimensions" specs.
http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-i5-2.4- aluminum-15-mid-2010-unibody-specs.html
http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-i7-2.2- 15-early-2011-unibody-thunderbolt-specs.html
http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-i7-2.3- 15-mid-2012-unibody-usb3-specs.html
Retina version
https://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-i7-2.7 -15-early-2013-retina-display-specs.html
Best.

Similar Messages

The Notification Center Yosemite primary user does not work in my Macbook pro and the other users if it works.

The Notification Center Yosemite primary user does not work in my Macbook pro and the other users if it works. How can I fix it?

The Notification Center Yosemite primary user does not work in my Macbook pro and the other users if it works. How can I fix it?

I make changes on the calendar of my MacBook Pro but the changes do not take and revert to what the entry was prior.

For the past week or so, I have made changes to the calendar on my MacBook Pro. The changes do not "stick" on my MacBook calendar and do not sync with any other device (iPhone or iPad). I just can't figure this out. Anyone have any suggestions?

By everything, I am assuming you have tried resetting the SMC (http://support.apple.com/kb/HT3964) and PRAM (http://support.apple.com/kb/ht1379). If you haven't tried this yet, please do!
See the following support document as well: http://support.apple.com/kb/TS1367.
The update you're talking about was the firmware update. Hopefully resetting the PRAM gets you up and running. Try resetting it 3 times in a row (hold the keys down until you hear 3 startup chimes).
Message was edited by: adamb529

HT1947 Can I control the volume of my MacBook Pro with the remote app on my IPhone or IPad?

Can I control the volume of my MacBook Pro with the remote app on my IPhone or IPad?

Welcome to the Apple Community.
To an extent yes. You can't control the master volume, but tou can turn the volume up and down, up to the maximum set manually on your computer.

HT204032 Does the non-Retina screen MacBook Pro have the ability to initiate Power Nap?

I've seen that the Retina screen MacBook Pros can use Power Nap from Apple's WWDC keynote but can the non-Retina screen MacBook Pros do that too? It has the same processor and close to the same RAM. Or is it because the Retina screen MacBook Pros have flash storage that they can do Power Nap? Thanks

From http://www.apple.com/osx/specs/ this is what is officially supported:

Should I buy the 13' non retina MacBook Pro or the RMbP

I am looking forward to buying a new MacBook Pro this year, but I am having a hard time choosing between the newer retina base model of the MacBook Pro or the older (2012) non retina MacBook Pro. I would use the laptop for non heavy gaming, web browsing, and creating documents for school. What would be better in the long run? I know that the newer retina is non upgradable but would the 128ssd and the 4gb of ram would still be good for a couple more years?

Personally, I would spend the extra $$ and get the 13" with 8GB of RAM and 256GB Flash Storage. I bought my daughter an early 13" Retina with 8GB of RAM and 128GB Flash Storage of which she only has ~27GB left. She'll be needing an upgraded Flash Storage (OWC) soon if she doesn't offload some files to an external drive. Her rMBP is not the PCIe flash storage.

Why does the volume on my MacBook Pro change on its own?

I just got my MacBook Pro and sometimes the volume goes up or down and usually when this happens iTunes opens up and starts playing randomly. Why does this happen!?

PrestigeRev wrote:
... Is this normal?
No. Have Apple fix this little problem before it becomes a bigger one.

Why have the ports on the left of my macbook pro and the wifi and bluetooth stopped working?

Hey All,
About a week ago the two usb ports on the left of my 17" macbook pro, soundcard, wifi, and bluetooth stopped working. The power port, ethernet, remaining usb on the right are still functional. I've tried repairing the permissions and other software based solutions but to no avail. I'm worried that this might be a motherboard issue but am apprehensive about taking the ol' girl into a genius because it will probably cost more to repair than the remaining value of the system. Anyone have any ideas, can confirm my suspicion?
Thanks!

Well I'm using Google Chrome browser on Lion and when I type in that URL nothing happens. Except for the "This webpage is not available" banner.
So it looks like your website is down and what you are getting on your devices are cache.
Oh just deleted the www and now I see the page. Yup all the info looks intact. home about us products Q&A and so on.

Will they tighten the hinge on my macbook pro at the apple store?

i just got a 13 inch macbook pro yesterday and the screen seems to be slightly loose its not a big deal but i worry that over time it will get more and more loose if i made an appointment at the apple store would they be able to tighten the hinge there?

Hi D,
You definitely want to bring your new machine in to the Apple Store to have them look at it. If they can adjust it, great, but if not, you'll want to have any defective parts replaced or get a new MBP.

Is it normal to have a letter J engraving on the corner of my macbook pro near the LED indicator?

I just noticed this while cleaning mac. I'm just wondering what it means.

By everything, I am assuming you have tried resetting the SMC (http://support.apple.com/kb/HT3964) and PRAM (http://support.apple.com/kb/ht1379). If you haven't tried this yet, please do!
See the following support document as well: http://support.apple.com/kb/TS1367.
The update you're talking about was the firmware update. Hopefully resetting the PRAM gets you up and running. Try resetting it 3 times in a row (hold the keys down until you hear 3 startup chimes).
Message was edited by: adamb529

Mid 2010 Macbook Pro - Change MTU size kills internet (Jumbo Frames)

Hi everyone, i'm hoping someone here can enlighten or help me solve my problem I'm having.
I am trying to change my MTU size to enable Jumbo frames on my 13 inch Mid 2010 Macbook Pro. I recently bought a ReadyNAS Ultra and would like to speed up transfers to the unit.
My setup is as follows:
I have my ReadyNAS Ultra 2 and 2010 Macbook Pro (Core 2 Duo) wired via cat6 ethernet to my 5th Generation Apple Airport Extreme. The Airport Extreme is connected via cat5e to my AT&T Uverse Gateway which is set up to allow my Airport to assign DHCP and NAT (gateway is in bridge mode with wireless off).
Anyways, I have enabled Jumbo frames on my ReadyNAS, when I enable them on my MBP.. it applies fine. It disconnects / reconnects the ethernet like it should, but then my connection drops. I can't see any devices on my LAN and I cannot access any internet websites, but according to the network pane I am still assigned a valid dhcp address. When I manually try to increase my MTU size, the same thing happens (from 9000 to 1600 I tried every size).....
Could it be my MBP just can't suppose the increase of MTU size? It leaves them at 1500 when I set it to automatic... if it doesn't support the increased MTU size, why would it let me custom change the MTU and even give an option to select "Jumbo Frames (9000)"?
I appreciate any help in advance!!

asdftroy wrote:
If you did read my post then you would have saw that the option is there, but that is not entirely what my inquiry is about. The option isn't working as intended, and I was wondering if anyone had the same issues as me. Thanks anyways.
Anyone else?
The way you responded to someone trying to help you probably means others will be hesitant to try.

I recently bought a Brother MFC-J430W, and it is Mac compatible, but no matter what drivers I install, I cannot connect the machine to my macbook pro. The CD for MFL Pro Suite does not let me open the "start up" part so I am very stuck!

I cannot access my MFL Pro Suite CD no matter what drivers I install. I have OSX 10.8 updated right now. Please help, I'll be needing my printer in a couple days for university!

That's Windows software.

Is the higher-end 13" Macbook Pro worth the extra $300?

I know that it has a faster processor and larger hard drive, but does it justify the extra $300?

Well, if you are facile with some tools you could install a bigger drive yourself. You can install more RAM on your own without the need for tools. But you cannot replace the CPU and GPU if you need more processing power in the future. If that's a concern then it's better to get it now because you cannot add it later.
For what you describe you could easily get by with a much less powerful computer. My personal decision was the 2.4 GHz model, dual-core i5, 500 GB hard drive and 8GBs of RAM. I then got a DataDoubler and an SSD from OWC that replaced the optical drive. Total cost was under $1,600.00. I bought the computer from an authorized Apple reseller which came with the 8 GBs of RAM, 500 GB 7200 RPM hard drive, MiniDisplay Port to HDMI adaptor, and MiniDisplay Port to DVI adaptor. Total was $1,352.00 including shipping (no sales tax.) DataDoubler is $75.00 and the 60 GB SSD was $150.00.
The reseller is ExperCom.com if you're interested.

Is it okay to closed the lid after using Macbook Pro even the it is hot?

Hi. I'm using MBP early 2011 I5 and I noticed the temperature getting high and palm rest is getting hot/warm when I'm playing games. Is this normal? temperature around 80 degree celsius accoringding to istat.
Also, after using the MBP, ofcourse the palm rest is hot/warm. Is it okay to close the lid after using it?
Thanks.

My practice has been to let the MBP cool a few minutes before closing the lid, so it's trapping less heat. I doubt this has much saving effect on the logic board components, but my MBP is old enough to have a glossyplastic display cover. It would look ugly if it started to warp.

TS3048 The keypad is not registering with my macbook pro - changed batteries but still not working. Bluetooth says it is connected. Suggestions please.

My bluetooth numeric keypad is not registering with my macbook pro - changed the batteries when the light started blinking - but won't work. Bluetooth says it is connected.
Suggestions please.

Your MBP sees the Bluetooth keyboard but won't pair with it probably because the keyboard is pairing with another computer or device nearby. If you had previously paired the same keyboard with another device, go to the other computer or device and either unpair it or have the device "forget" the keyboard. Then you will be able to pair the keyboard with your MBP.

Does the year of the macbook pro change the size of it?

Similar Messages

Maybe you are looking for