Does the Zynga toolbar cause connection issues?

I am having trouble while playing Cityville on FB "trying to connect to server do not close your browser" Oops connection lost, refresh. some say this is due to the zynga game bar . I clean cache,history,cookies regularly and restart from time to time
What should I do? Delete something??

Just as a general comments:
* if you use more than one version of firefox you need to create separate profiles for each, or you probably will run into problems see [http://kb.mozillazine.org/Testing_pre-release_versions]
* if you are using the new 'firefox button' click on that and look for the toolbar viewing options, and any other options it lists
Sorry I do not use Zynga, and do not know whether it is even fully compatible with Firefox 4 beta, alternatively it may even use the apps tabs feature see [[What are App Tabs?]]

Similar Messages

  • Why does the zynga toolbar not work or even show up with Firefox 4.0 beta 12

    I installed the Zynga toolbar last week and it does not show up, but in the properties it shows installed, but I can not get it to show up with the other toolbars.

    Just as a general comments:
    * if you use more than one version of firefox you need to create separate profiles for each, or you probably will run into problems see [http://kb.mozillazine.org/Testing_pre-release_versions]
    * if you are using the new 'firefox button' click on that and look for the toolbar viewing options, and any other options it lists
    Sorry I do not use Zynga, and do not know whether it is even fully compatible with Firefox 4 beta, alternatively it may even use the apps tabs feature see [[What are App Tabs?]]

  • Since downloading the Zynga toolbar FireFox keeps hanging on the start page!

    I downloaded the Zynga toolbar through Facebook using their app through one of their games so I believe it's legit BUT since downloading here's the rundown of my experience: #1--toolbar doesn't show at all, I try to find ways to get rid of the download since it's not working, can't find it, give up then magically the toolbar starts showing up; #2-toolbar is there when I load FF but shows only the burgundy w/white Zynga on the tool bar to the left and icons to the right but FF does NOTHING, can't click on anything, status bar on bottom says done but the progress bar is kind of reloading itself at the full marker, can't shut it down so have to power down and restart; #3-magically has the Zynga bar but says "Mafia Wars" drop menu with game options this time and actually works, this happens 1x; #4-same as #2 repeatedly but I find I can open a second FF browser and #3 works in that one BUT after shutting the 2nd FF browser I cannot close the first one without powering down. How do I fix this!!!!

    Uninstall that toolbar.
    http://kb.mozillazine.org/Uninstalling_toolbars

  • HT2646 Does the HDMI cable get connected to the TV or HD receiver if you have a Bose surround system

    In setting up apple tv does the HDMI cable get connected to the HD reliever instead of in back of the tv when u have a Bose system?

    Your best bet is to connect the AppleTV's HDMI to the Bose and the Bose HDMI to the TV. You could connect the AppleTV's HDMI to the TV and the AppleTV's optical to the Bose but optical (S/PDIF, specifically) does not have as much bandwidth as HDMI so you'd potentially have lower quality sound (from what I've read...I'm not an expert on audio).

  • Does the new IPOD Nano connect with the bose docking stations?

    Does the new IPOD NANO connect with the Bose docking stations?

    hi
    Yes it does. just bought a Bose. But make sure you have no cover on your Nano as it will not connect!

  • Could the iTunes suggested fixes (i.e. DNS flush) CAUSE connectivity issues

    I too have recently downloaded the latest version of iTunes and tried unsuccessfully to connect to the iTunes store via my iPod Touch. iTunes even tried to update the latest iPod software but couldn't connect. But here is the my real concern, I tried all of the fixes suggested by iTunes/Apple with no success, however, since these "fixes", my other programs that have worked fine just prior to these "fixes" suddenly don't recognize an internet connection either. I tried to do a Java update...couldn't connect. I downloaded a new game from Gamehouse and tried to login to FunPass (as always)...couldn't connect, however, any game downloaded prior to yesterday's "fixes"...there is no problem connecting. I even yelled at AT&T Yahoo support thinking they were the problem (recent issue with their Protection Suite). Finally, I purchased, downloaded, and ran a new antivirus program thinking a possible virus or malware or adware or something...found & fixed stuff (mostly spyware), but it can't update or finish registering because it also thinks there isn't a connection. Could flushing the DNS (as suggested) cause connectivity problems with my other programs?? Or, any suggestions?? I am desperate

    Flushing the DNS entries shouldn't be a problem, as they should just get rebuilt.
    DNS stands for Domain Name System, it's just an "address" for all the different computers connected to the internet to find each other.
    Here is a good explanation on that process:
    +When a computer visits a website for the first time, it stores the website's DNS information in cache. The next time the computer visits a website, it looks in the cache to see if the website's information is present to use. This can cause problems if the website's DNS information has changed since the computer's last visit. Flushing the cache removes all the information stored in cache, forcing the computer to find the new DNS information for the website.+
    Message was edited by: Katrina S.

  • Myspace causes connection issues

    It is hard to describe this problem, and hard to search for. I can't seem to find an answer. If myspace was just slow to load, it would be fine, I'd just wait. But what happens is that any time I go to a myspace band page, it kills Firefox's connection to the Internet, and I have to restart firefox.
    I have a 24" iMac (1st gen) running Leopard 10.5.1
    I use Firefox 2.0.0.11
    I have Safari 3.0.4
    I am on AT&T DSL
    When surfing the web with Firefox, if I try to open a myspace page, it kills firefox's connection to the Internet. Myspace is VERY slow to load, and it almost never completely does. Sometimes the music player loads and sometimes it doesn't. It always messes up firefox's connection. I have to quit firefox and reload it to get it to work again.
    Safari does no better; it takes a long time to load and generally doesn't load the whole page either. Sometimes it works, sometimes half the page loads, sometimes I only get a blank screen with blue question marks.
    I've tried running firefox in Rosetta. It did not help and actually made FF slower and use a lot more CPU time...
    I just tried uninstalling firefox (with app zapper) and reinstalling. Clean install of firefox and it did the same thing. Myspace would load but when it is trying to load the music player it seems to take forever, and when I try to go to any other website it will not connect.
    Now it seems worse...I accidentally opened a myspace page and it broke firefox's connection. I restarted firefox and everything worked again except for google mail. I had to restart the Mac to get firefox to access google mail again.
    Maybe someone could give me a new direction to take on this, I'm at a loss.

    Same issues overhere, sometimes Myspace works perfect and sometimes when logging in and when checking messages in Myspace the page won't load and my internet connection fails.
    what i than do is:
    1. clean up Safari (cookies and cache)
    2. restart my belkin router ( with the Lan cable not connected to the cable modem)
    3. connect my cable modem to my belkin router.
    4. launch safari and my internet connection is working again.
    this could be a OSX Leopard / Myspace bug because its strange that the internet connection gets lost.

  • Two Fx 4 windows open at the same time causes usability issues

    When I load two instances of Firefox, I get multiple issues with the second instance usability, display, and hot keys.
    The issues are as follows:
    # Menubar/Toolbar appear differently
    # Back/Forward buttons do not work
    # F-Keys no longer Function
    # Favicons show old, cached icons
    Please see screen grab of my two monitors with two instances of Fx 4 open, but the I played with my toolbar settings to get it to look somewhat ok.
    http://www.travellingwebguy.com/images/Fx-4.png
    This is what happens when I open a second window, and do not mess with the toolbars:
    http://www.travellingwebguy.com/images/Fx-4-2nd-window.png
    This issue was not happening with Fx 3.x.x.
    I am using a custom Persona, but I have changed the Persona a few times and I still get the same result.
    I've removed all incompatible extensions and upgraded all the ones that needed upgrading.
    Not sure what the issue is here, but would love to troubleshoot it down if possible. Please let me know if any other info is required!
    Cheers
    Tim

    Exact same issue here. Also, the add-on manger will not launch.
    I thought it might be an add-on causing these issues, but only one out of my ten or so addons work in FF4, and I disabled it with no success.
    This is a huge issue for me. I attempted to uninstall FF4 and go back to FF3 but I can't find an install file for FF3.

  • Why does the 3GS lose 3G connection all the time?

    My 3GS drives me insane and I'm strongly considering going back to BlackBerry when my upgrade is due in November because I NEVER had this issue with those phones but the issue occurs on my 3GS, it happens with my friend's iPhone 4 and I therefore doubt the issue will be resolved in the next iPhone.
    Whenever I lose mysignal, ie. going into a lift, the signal returns afterwards but the 3G connection NEVER returns automatically unless I turn on Airplane mode and then turn it back off again. When I do this, 3G returns on an almost full signal so I know that the area I'm in has a strong enough signal.
    This is unacceptable for a phone that is supposed to do pretty much everything! And getting a 3G signal back after a drop in signal really doesn't seem too much to ask since all other phones seem to handle it perfectly well. I've also noticed that iPhones tend to display 'searching' for absolutely ages after coming out of an area with no signal, whereas everyone else regains their signal long before I do!
    This is very frustrating, I feel like I am babysitting this hunk of junk and I've reached the end of my tether. Do iPhones have an issue in general with signal and maintaining a decent signal? If so, I'm getting shot of this thing and getting a phone that actually functions how it should.
    And yes I've switched on and off, yes my phone regularly runs completely flat, yes I've taken the SIM out and put back in and yes I've even tried a completely brand new SIM.

    Hi
    Are you in the UK ?
    I have the exact same problem on O2 - using an iphone 3gs 4.3.5
    Now, I think it is to do with a software update... My cousin has a 4 on 4.3.1 or .2 and hers doesn't do it but another friend has a 4 on 4.3.5 and hers does the same as mine.
    It drives me mad. I come home and have good 3g but then it goes and I have to go into airplane mode and back to re-connect to 3g and then when I do there is like 3 - 4 bars of 3g there,
    I wish Apple would sort it out!!!

  • Won't allow me to downlaod the zynga toolbar

    Hi
    Downloaded firefox 5.0 this morning...my zynga toolbar was gone. When I went to install the toolbar, it said that it was not compatible with the 5.0

    Which dictionary are you trying to install?
    You can look here for dictionaries:
    * https://addons.mozilla.org/firefox/language-tools/

  • HT3737 Why does the Safari toolbar disappear when the cursor is not on it ?

    Why does the Safari tool bar disappear when the cursor is not pointed to it?
    How can I fix it ,Please.

    It sounds like Safari is displaying in 'full-screen'. To reveal the tool bar move the mouse pointer to the top right-hand corner of the screen. You should see two blue arrows, click on those and it should take it out of full-screen mode and leave the menu bar, tool bar, etc. permanently on view.

  • Why does the Yahoo toolbar which contains my frequently accessed websites keep disappearing from the Firefox browser?

    I recently discovered that I could customize a toolbar to hold all my favorite websites and I could thereby reach these sites with one click. A marvelous feature when it's there, but all the icons keep disappearing. I can get them back by downloading the Yahoo toolbar AGAIN and restarting my computer AGAIN, but that's more trouble than typing the URLs to begin with. There's got to be a better way.

    I agree, this is very frustrating! Sometimes it loads with no problems, sometimes it doesn't. I have AT&T/Yahoo and really miss the toolbar icons to get to my favorite sites! I hope this can be corrected soon!

  • The Solution to all Connection issues on Windows

    I have had my iPod for a month and a half now, and right off the bat, I noticed it had major problems with connecting to my computer through USB. I had the whole bit, sometimes it wouldn't recognize that it was plugged in, sometimes it said that it didn't have drivers installed, sometimes Windows recognized that it was plugged in but didn't know what it was, a lot of the time my iPod would say Do Not Disconnect and it would go straight to the annoying black check mark, before even opening iTunes. It was a pain in the neck, and after searching these forums, you need to listen to the people who have experienced, and solved these problems.
    What you need to do is save 40 dollars, go to your local electronics store and pick up a 20 dollar Firewire card and then go to the Apple store or the online store and pay 20 dollars for the USB/Firewire combo cord to hook up your iPod to the firewire card to upload new music, and to plug into the charger to get it charging at the same time.
    Apple was cheap not to have supplied a firewire cable when it clearly does not support USB enough to be considered usable. Beg your parents, mow some lawns, take it out of your savings, whatever you can to get a Firewire card and that cord. It will save you SO much time, and loads of hassle. I have had it for easily 3 weeks, and I haven't had a single problem with it. My iPod works better than ever and I love it now. Seriously, get it if you can and it will help you out, so much.
    Oh and another thing, my iPod wouldn't shut off sometimes, and you can fix that because it happens every time you try to shut if off, right as a song starts playing. Just go to the Now Playing, skip to about midway in the song, and then you can turn it off.
    I hope this helps someone, and whatever you do, if you are getting USB problems, then spend the 40 dollars, it is no waste. The problems with USB do not stop, they instead get progressively worse. Spend the 40 bucks, you'll thank me later.
    -Freeman out

    I will also testify to the power of the FIREWIRE! We were having endless problems and technical issues trying to connect with the USB. We spent many hours uninstalling, reinstalling, rebooting, resetting, unplugging, replugging, trying to change drive letters, trying different USB ports, etc. etc. and NOTHING was working! My wife even took the iPod to an Apple store to have them format it thinking that would solve the problem. It didn't! Our computer still wouldn't recognize the iPod and the Updater wouldn't "mount it" or sometimes the computer would recognize it, but iTunes wouldn't. If it wasn't one thing it was another.
    Yesterday, finally fed up and stressed out, we took our laptop and the iPod to an Apple store and spoke with a tech at the "Genius Bar". We told him of our problems. He then immediately pulled out a firewire cable, hooked up the iPod and BAM! It was working! Hallelujah! It's a miracle!
    So yes, apparently using a firewire to connect your iPod will solve all connection problems! Now why Apple isn't telling anyone that is anyone's guess. But I still read where other people say they're encounter other problems and they're using a firewire. A perfect fix? Maybe not, but at least it's working just fine for now.

  • RDS Farm setting applied through GPO causing connection issues

    I'm having a strange issue with some RDS GPO's. Since automating the RDS server build process through SCCM I've moved the RDS farm / connection broker settings to a GPO. This works fine, once the servers are built the GPO applies and the machines join the
    farm.
    However, when any GPO associated with the farm is changed, all the sessions connected to the farm are dropped. User can reconnect but this is very inconvenient for us to try and push shortcuts and what not during production.
    After searching fro a while, to me, it seems like the GPO that assigns the farm settings is being reprocessed, causing the settings to drop and connections to be dropped.
    I wouldn't think that this would be normal behavior? Can anyone confirm for me that this should work as I expect it to?
    Thanks!

    Ok so I finally figured it out.
    It was what I expected, the GPO refresh was causing the settings to be dropped, this caused some registry keys to momentarily revert to their default.
    Specifically:
    HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Terminal Server/fDenyTSConnections
    The problem is that even if you set this registry key by hand, it will still revert during the GPO processing, which is what threw me off.
    The solution is to simply apply a GPP to the computer that specifically sets this registry entry to '0'. By setting the GPP, it stops the setting from reverting when GPO is refreshed. After extensive testing, I can confirm that this is fixed.

  • What does the Keynote button titled 'connect' do?

    Hey.
    I was wondering what the button titled 'connect' does? It's found at the top with all the other icons ex. themes, view, shapes, but you might need to go to 'customize the toolbar' to find it.
    any help would be appreciated.
    Thanks,
    Brandon

    Hello Brandon,
    just select two shapes, images or other objects. Then it becomes active and when clicked it draws a line connecting the two objects. When the objects are moved the line is moved with them so they stay connected.
    -Vaclav

Maybe you are looking for