Does Thinkpad Edge E545 have a non-stopping fan?

I was thinking of purchasing this model:
http://shop.lenovo.com/ae/en/laptops/thinkpad/edge-series/e545/
I don't need anything fancy just something reliable so this would suit me fine. I mentioned it to a friend who said he bought the E530 and has regretted it ever since due to an issue with the fan. Apparently once the fan starts it doesn't stop. There is a 90-page thread about here:
http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/E530-pulsing-whiny-fan-no-low-load/td-p/797577/pa...
I had assumed this would have just been an isolated model problem. What is concerning is that not only have Lenovo not fixed the issue but I have come across similar complaints about the next model, the E540:
http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/E540-Fan-does-not-stop/td-p/1439657
If the same issue is present in the next model am I wrong to assume it is also present in the E545? Can someone confirm either way plz. I am also considering a Dell Latitude which I will purchase if there is no confirmation the problem has been addressed, but I would prefer to get this model.
Regards, Miranda.

I set up an account just to reply to you!...and also I just bought a Lenovo Thinkpad Edge E545, and I want everyone to know what they're doing.  Plus, I'm having the same problem.  I just downloaded the Broadcom Wireless LAN (Driver here! Remember to choose for either Windows XP, 8, 8.1, or whatever you have!) and I've seen past comments that this has worked for them.  I'm about to go try it out, so wish me luck!  I hope you haven't returned that laptop you bought!  Lenovo is usually such a good brand, from what I hear, and I personally already enjoy the exterior, as I put structure, stability, and damage-resistant against style, which the Edge E545 seems to be more for the accident prone or careful type, but still cool!  Good luck!

Similar Messages

  • Bios protection from infection with virus or bios recovery of Lenovo Thinkpad Edge e545

    I have Lenovo Thinkpad Edge e545 laptop. Among downloads there are no bios images but only backup cd iso file. Does laptop bios somehow protected from beeing infected with virus when OS installed on laptop is infected? If not, is there a way to recover bios from usb flash? Or is there some other way to recover already infected bios without help of technical support center?  

    Dear Wyacheslav1
    Welcome in lenovo community
    Actually there is no relationship between the Virus and the BIOS also the BIOS cannot be infected such as the windows . So if you have any debut that your machine has been attacked by a Virus, you can install any antivirus application to scan for this virus and to protect the machine from such attack 
    Thanks
    Alaa

  • ThinkPad Edge E545 - fehlerhaft​e Firmware

    Wann kann man eigentlich mal mit einer korrigierten Firmware für den ThinkPad Edge E545 rechnen?
    Seit einer halben Ewigkeit steht nur eine Firmware mit diversen Fehlern und einer überaus kundenfeindlichen Whitelist zur verfügung.
    1. Die Hardwarevirtualisierung lässt sich nur nutzen wenn sie im BIOS auf "Disable" steht.
    2. Die Whitelist verhindert den Einsatz eines alternativen WLAN/Bluetooth-Moduls.
    3. Die ACPi-Tabellen sind ebenfalls nicht ganz sauber.

    Sorry to ressurect an old thread, but recently I've been getting random kernel panics on my t61 as well. I believe the root cause is the wireless card. I have an intel 4965 card just like you.

  • Varying brightness on my ThinkPad Edge E545

    I have a ThinkPad Edge E545. I've only had it a few days but it's brightness varies in and out constantly while I'm using it. I've seen other people have had the same problem but not on my exact computer so I wasn't able to fix it by the solutions given to them. Also mine runs on Windows 7 professional. This is the exact computer: http://www.amazon.com/Lenovo-Thinkpad-20B20011US-15-6-Inch-Laptop/dp/B00FU83YWS/ref=cm_cr_pr_product...
    Please help me. Thanks!

    What operating system was your machine shipped with? Lets say windows 7.
    If it came with windows 7, what is your intent with installing a retail windows 7 on your current machine? Is a purchased retail win 7 or a trial 30 day?
    Simple solution:
    (1) If you backed up the factory partiton using the CREATE RECOVERY DISC, rebuild your system with those DVDs.
    (2) Call the support center and order factory recovery disc with the operating system originally shipped on the machine.
    (3) Reinstall win 7 using the 64 bit install disc. And forget using factory install. As long as you have a PRODUCT key to activate win 7, you are good to go.  Download whatever software you need from the Lenovo website, install.
    I went from Vista and installed win 7 home, retail version.  I wiped the whole drive clean during the install.  Installed RnR, took a backup to DVD.  That is my recovery option now.
    Technically what happened:
    (1) Factory ship modified BCD (boot control data) to have entries for Windows, Windows RE, and RNR/factory install.
    When you use RNR to factory install, it points to a BCD entry to use on reboot.  In your case, your system booted into windows RE (recovery environment).
    (2) Your windows install rebuilt the BCD, removing the entry to the factory partition.  There is another post out here, recently, have the same problem as you.  I will post the link to their resolution.  It involved installing DEBIAN free software, and placing wim.pe software into the factory partition or such to make it bootable again. 
    http://forums.lenovo.com/t5/ThinkVantage-Technologies/Recovery-problem/m-p/1190409#M23247
    Back to the main question, what do you want on your system today?  Retail 64 bit win 7 from retail box? 
    (3) Opps, it wont boot. Someone is helping me.

  • ThinkPad Edge E545 - Sluggish & Crashes Daily

    Hi there,
    I thought I'd see if I could get help here before opening a repair ticket. I'm experiencing general sluggishness as well as daily freezups and browser crashes with this brand new laptop purchased in November of 2014. Whenever I run either Chrome or Internet Explorer, the names and x's (to close tabs) in the browser tabs suddenly disappear on a daily basis at random times. I have to either reboot or use Task Manager to close the browser and start again when this happens. I also get random freezes, where the entire computer (including the mouse cursor) stops responding, then it starts responding again after 20-30 seconds. Chrome in particular has a curious issue when launched: instead of the normal Chrome window appearing, a very generic, basic, and blank window appears at first, which after three seconds is filled in with the normal Chrome features. On no other computer I own or use does Chrome behave this way, it usually just launches normally from the start.
    I bought this laptop with Windows 7 preinstalled rather than 8. The only programs I installed are Avast, AOL 9.7, CCleaner, and MalwareBytes (the free version that does not actively run), and I only removed whatever antivirus came preinstalled (was it McAfee?). I also updated Java, Adobe Reader, and Flash. The problems persisted even after I completely uninstalled Avast. I've run virus scans with both Avast and MalwareBytes and found 0 infections. Uninstalling and reinstalling Chrome, even after cleaning the registry and manually removing leftover files and folders in the AppData and ProgramData folders in between uninstall and reinstall, does not accomplish anything. Booting in Safe Mode seems to alleviate the curious Chrome load issue (it opens with the normal titlebar and buttons, without a blank startup window).
    Any ideas what's wrong? Any known issues with the Windows 7 drivers perhaps? Or the included Lenovo software? Thanks.
    Peace,
    Brian

    Hi there,
    I thought I'd see if I could get help here before opening a repair ticket. I'm experiencing general sluggishness as well as daily freezups and browser crashes with this brand new laptop purchased in November of 2014. Whenever I run either Chrome or Internet Explorer, the names and x's (to close tabs) in the browser tabs suddenly disappear on a daily basis at random times. I have to either reboot or use Task Manager to close the browser and start again when this happens. I also get random freezes, where the entire computer (including the mouse cursor) stops responding, then it starts responding again after 20-30 seconds. Chrome in particular has a curious issue when launched: instead of the normal Chrome window appearing, a very generic, basic, and blank window appears at first, which after three seconds is filled in with the normal Chrome features. On no other computer I own or use does Chrome behave this way, it usually just launches normally from the start.
    I bought this laptop with Windows 7 preinstalled rather than 8. The only programs I installed are Avast, AOL 9.7, CCleaner, and MalwareBytes (the free version that does not actively run), and I only removed whatever antivirus came preinstalled (was it McAfee?). I also updated Java, Adobe Reader, and Flash. The problems persisted even after I completely uninstalled Avast. I've run virus scans with both Avast and MalwareBytes and found 0 infections. Uninstalling and reinstalling Chrome, even after cleaning the registry and manually removing leftover files and folders in the AppData and ProgramData folders in between uninstall and reinstall, does not accomplish anything. Booting in Safe Mode seems to alleviate the curious Chrome load issue (it opens with the normal titlebar and buttons, without a blank startup window).
    Any ideas what's wrong? Any known issues with the Windows 7 drivers perhaps? Or the included Lenovo software? Thanks.
    Peace,
    Brian

  • Built-in mic on Thinkpad Edge E545 Win 8.1 not working

    OK so when I got this computer shipped to me from school back in November of 2014 it had Win. 7 on it. I had the Windows 8 recovery disc and decided to use that to upgrade the OS. Since that day my mic has been on steriods. I also keep getting the stupid message about the Dolby digital audio drivers not working. I've done everything I could find to to on the interwebs. I had installed the update first and still got it.  Then I uninstalled, reinstalled, and restarted the laptop... still got the message.  Now I can't even use Skype.  PLEASE someone with updated information help! I need this thing to work for school since I have tutoring groups via Skype and such.  Many thanks. 

    Thanks for your answer! I was able to solve the problem by running the pre-installed System Update rather than some of the solutions that had been poster somewhere else in the forum.
    In any case, for the record, the path of the file I was referring to is C:\Program Files (x86)\ Thinkpad \ Utilities\ PWMTR64V.dll

  • Who has a good docking station for ThinkPad Edge E545?

    I want to dock my E545 (Windows 8.1) if someone can recommend a docking station brand+model that works. Suggestions?

    True, the Thuderbold display is good, but it doesn't give me that FULL desktop experience with all the other peripherals, etc like this does for my Lenovo:
    http://shop.lenovo.com/SEUILibrary/controller/e/web/LenovoPortal/en_US/catalog.w orkflow:item.detail?GroupID=38&Code=433710U&current-category-id=34851FD360E5473E B9DFEB639312E18E&&hide_menu_area=yes

  • Thinkpad Edge E545 CPU Overheatin​g

    I just received my new E545 and booted it up. I've noticed the CPU is quite hot and so ran some software tests. It is showing the CPU temp around 92 degree C / 196 degrees F.
    The chip is an AMD A10-5750M. I take it the heat isn't normal. Should I be sending this back to warranty?
    Solved!
    Go to Solution.

    The temperature is apparently normal, see http://www.hotchips.org/wp-content/uploads/hc_arch​ives/hc25/HC25.30-SoC2-epub/HC25.26.312-Richland_H​...

  • Please help -- Edge E545 bricked after flashing bios (firmware)

    Hi Folks,
    I just bricked my Thinkpad Edge E545 while attempting to update the BIOS from 1.09 to 1.12. I tried to use a bootable CD, and it seemed to go well, but when it seemed to be done, I got contradictory instructions to either remove the CD and power off or leave the CD in and reboot. I left the CD in the drive and pressed ENTER. The screen went blank, and stayed that way, with no discernable activity. At some point I held the power button to shut it off. That was the last I saw anything on the screen.
    Anyhow, I tried to use the T400 procedure below to prepare a bootable USB stick with the firmware to flash on it. (In the meantime I have learned that this is the "phoenix crisis disk" procedure).
    The utilities I got here: http://www.staff.uni-marburg.de/%7Eschmitzr/T43_recovery.zip
    stick preparation (on Win2008R2 system):
    1) zero'd a USB stick (2GB)
    2) used WINCRIS.EXE to format the stick (pointed it at the v1.12 "BIOS.WPH")
    3) unplugged and replugged stick
    4) copied MINIDOS.SYS, PHLASH16.EXE and BIOS.WPH to the top directory of the new filesystem on the stick
    5) "safefly removed" the stick
    reflashing:
    1) disconnected battery and power cable
    2) plugged in stick (tried all 4 USB jacks, 2x full and 2x SS)
    3) pressed and held FN and B keys (also tried FN+R, FN+ESC)
    4) plugged in power
    5) pressed power button
    none of the above had any observable effect. The USB stick is never accessed. I even tried disconnecting the CMOS battery before an attempt -- no change.
    Does anyone have a hint about how to reflash trashed firmware on this laptop? This laptop has UEFI firmware -- maybe it's simply not possible to perform a crisis recovery?
    cheers,
    Rob

    edgardcafe,
    I take it that you sent your T135D to the repair Depot, and maybe it was sent before you saw my last message?  It may have been possible to continue using the laptop off of battery power, but only until that existing charge was depleted.
    As the Support Bulletin you referenced explains, "should the BIOS determine that a harness failure is occurring, external power will immediately be disabled eliminating the possibility of the over heating.  You will then need to contact the Toshiba call center to set up a warranty repair."  If that's what has occurred here then the BIOS is doing what it was designed to do in order to eliminate the risk of damage or injury. 
    Depot repairs typically take 7-10 days so that's a reasonable expectation for how fast you're likely to get your laptop back, but no one here in the forums can guarantee a repair time for any specific case or expedite general repairs.  I understand that it's a inconvenience but better safe than sorry.
    Regards,
    Jim

  • I upgraded my iPad to version 5.0, I had a message on my Setting to upgrade the software to version 5.0.1, I select install and during installation my iPad2 star rebooting and now doing it non stop. I have no time to restore or do anything

    Hi,  I upgraded my iPad to version 5.0, I had a message on my Setting to upgrade the software to version 5.0.1, I select install and during installation my iPad2 star rebooting and now doing it non stop. I have no time to restore or do anything. My ipad rebooting every 2 or three minutes

    See Here
    iPad Unable to Update or Restore
    http://support.apple.com/kb/ht4097

  • Thinkpad Edge E420 does not boot up and customer service does not help

    I have a Lenovo Thinkpad Edge E420 laptop that stopped powering on all of a sudden. It was working fine till one day fine and all of a sudden, does not boot up the next morning. I have googled around and looked in Lenovo Forums and it looks like this is a common issue with motherboard on these types of laptops and that lenovo fixed some of these. Unfortunately, my laptop is out of warranty but I do see that Lenovo fixed similar problems for some laptops that are out of warranty. Please see the two threads below
    https://forums.lenovo.com/t5/ThinkPad-Edge-S-series/thinkpad-e420-wont-start/td-p/755813
    https://forums.lenovo.com/t5/ThinkPad-Edge-S-series/E420-motherboard-problems/td-p/667009/page/10
    So, I tried calling customer service multiple times hoping that I could get to talk to a supervisor and explain the problem. Just today, I was told I need to agree to pay $575 (which is much more than what the laptop is worth) to even talk to a supervisor. This is quite disappointing.
    If any Lenovo support staff is monitoring it, can you help here?

    Its not the motherboard even though they say it is. All they will do is replace the motherboard and it will just fail on you again. I had the exact same issue and the motherboard was replaced. Next day I used it it failed again. You need to remove the CMOS battery which is located underneath the laptop. Its in the compartment with the one screw. Remove that. Remove the battery and all power supply. Then  plug the CMOS back in and  plug in powercord. Once you have done that start up as normal. Press f1 to enter BIOS. Go to the Config tab and under "power options" disable "rapid intel start." That worked for me as a temporary solution. 
    It clearly isnt a motherboard fault as all Tech support from Lenovo claim it to be. I mean c'mon I had the exact same fault the day after my motherboard was replaced, but after removing CMOS and battery the motherboard magically starts to work?? Must be related to the W5 problem they have been having with BIOS. 
    Heres a link to another thread with others with the same problem.
    http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/E540-power-issue/td-p/1326979/page/9
    Let me know if this helps at all since no one from Lenovo seems to care about helping their own customers... very dissappointed with the customer service. Personally I dont think Ill ever purchase a lenovo product again after their pathetic execuse for "tech support." Anyway good luck!

  • I have updated my Macbook pro to mavericks since yesturday it has been running none stop with a gray screen and the apple logo in the medle

    I have updated my Macbook pro to mavericks since yesturday it has been running none stop with a gray screen and the apple logo in the midle. Does anyone has incounedt that same of problem? Please help. Thank you in advance.

    The startup disk may need repairing ...
    Startup your Mac while holding down the Command + R keys.
    From there you should be able to access the built in utilities to repair the disk and restore OS X using OS X Recovery

  • My iphone 4s screen is non stop flickering and is very messed up  does anyone know how to fix this?

    my iphone has recently started flickering really bad non stop and it will sometimes change colors and then sometimes lock on its own. I didnt drop it in water or anything, i cant use apps or text or really do anything at all. Ive tried rebooting it several times, ive tried turning off the auto brightness, nothing seems to help does anyone have any suggestions?

    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    You will find respective repair costs in the appropriate link:
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
    1. iResq or Google for others.
    2. Buy and replace screen yourself: iFixit

  • System Does not Load, Fans Spins Non Stop, Blank Screen.

    So i have a Quad Core 3Ghz with the ATI Radeon X1900 512MB ram.
    I also have 2GB of internal ram and 2 more purchased 3rd party, totally of 4GB.
    I have had my computer for about 3 months now i am guessing since the first week it came out. About 2 weeks ago i noticed my monitor would go out, i thought it was the monitor. Up until it started when i would start up the computer. The Fans inside would non stop spin and the OS would not Load up the Screen was still Black and not turning on but the power light was on and fans spinning. it would do this to a few other monitors as well. I did apples Hardware Test, 5 times, the extended one and nothing found, no errors. it does it with Apples Ram that i got and with just the 3rd party ram as well with out the apple ram.
    I dont know if its the Graphics card because it seems to be cutting off the computer all together. when i am using it sometimes it will just go out on me. the computer light will be on like its on but the screen is out. i also was in mid chat with friends and the would not get my message hoping it was the Graphics card but it seems like it shuts down the whole system.
    So yes, i have to restart it about 6 or 7 times for it to get past that Fan Spinning Non Stop stage then it clicks into gear and works. Every morning it works like that. same routine for over a week now.
    Any clue as to what it would be? like the mother board or Power supply, i dont know how the power supply would stop the OS from loading and fans spinning but i am at a loss?

    Mac Pro came out in August '06. This is the 8-core model?
    The ATI Radeon can 'suffocate' if the air intakes on the cooling chamber of the graphics card become clogged with dust and unable to cool the card down. Needs to be cleaned from time to time.
    Did you do an SMC Reset?
    http://docs.info.apple.com/article.html?artnum=304123
    Have you been using Hardware Monitor / Temperature Monitor to check on the temperatures of RAM, drives, cpu, etc?
    Regular maintenance with Disk Utility and Disk Warrior to repair the drive?
    An emergency boot drive?
    when you boot from the DVD does it work normal? have you repaired the boot drive from DVD (lacking an emergency boot drive)? How about a clean install on another drive?
    Some people use v. 2.1 of smcFanControl to force the fans to run slightly higher to insure that RAM and video card don't overheat.
    How is the wall current and circuit? what else shares that circuit? are you on a UPS? (I wouldn't be without one and Mac Pro needs 1200VA.
    http://www.apple.com/support/macpro/

  • WHY does the finder insist on rearranging the files in a folder in alphabetical order even when I have selected "none" in the preferences for file organization?

    WHY does the finder insist on rearranging the files and/or documents in a folder in alphabetical order even when I have selected "none" in the preferences for file organization? Even after I numbered the documents/folders to keep them in my preferred order, it will still displace them occasionally. This is becoming increasingly frustrating!
    Is this a "Pages" issue or "FInder"? The vast majority of documents I use are in Pages, but there are also Numbers, PDFs, jpegs and a few other applications involved. This never happened before I upgraded to Mountain Lion; in Tiger, the documents (mostly Appleworks) and files stayed where I wanted them to be.
    I am visually oriented, and prefer to arrange items in a folder in an order that makes them easier for me to access, which is often NOT alphabetical.
    Can anyone suggest a solution? Please??
    Thank you.
    Sara

    nbar,
    Thank you for your reply.
    However, I do not understand what you mean by "user account." I am the only user, and can find no options for "user" or "guest." The parental controls have always been off, as there are no other people who have access to my computer.
    Frank,
    Thank you for your reply.
    All my documents, files and folders are in icon view, Arranged By: none in both view and view options. This arbitrary rearranging does not happen all the time, only when I make a substantial change to one of the documents in the file or folder. I'm not sure what you mean by "column heading."
    MichaelLAX,
    Thank you for your reply.
    I know, to my sorrow, that Appleworks does not work with Mountain Lion. I spent at least three months converting approximately 2,000 Appleworks documents to Pages, Numbers, Bento (for databases) and Touchdraw (for drawings). So this is not the problem; but as I said, I did not have this rearranging problem with Appleworks - the icons stayed where I wanted them to be. I still miss the ease and reliability of Appleworks, darn it!
    Frank,
    Thank you for your second reply.
    I do have the Sort By: in view options as well as in view set to "none."   The finder still insists on rearranging, but only when I have made a substantial change to a document in that file or folder.
    Any futher thoughts?
    xdab, 
    Thank you for your reply.
    "Are you are using icon view, but for some reason the finder moves files around? is that the problem?"
    YES!! This is exactly the problem.
    "If this operation is successful then erase the original and rename the new one to the name originally chosen by the user."
    This seems like a lot of trouble, especially as I often work on several documents at the same time.
    "By the way, the finder has a "clean up by" menu that rearranges icons in one of the standard orders, there are shortcuts that produce the same effect, for example <option><cmd>1 sorts them by name. Is it possible that this shortcut was typed by mistake without you noticing?"
    I do know about this "clean up by" option, and avoid it like the plague! So I doubt this is the issue, and I infrequently use keyboard shortcuts like this anyway.
    Thanks all who replied. None of the suggestions seem to work, however. Any others out there?
    Regards,
    Sara

Maybe you are looking for

  • Not able to get the value from type defined in other progarm

    Hi All, I have a create a type in one package spec(Globally), now i am using the same type in another package.Simply i am calling the first package and try to store the value in Type and use the same type in second package. But i am not able get the

  • MacBook Pro to my iMac with the firewire it makes me enter the Key product code for Office:Mac2011

    When I connect my MacBook Pro to my iMac with the firewire to use as a monitor it makes me enter the Key producy code for Office:Mac 2011 every time. Then when I disconnect my MacBook I have to enter the product key again to use office on it??? Any i

  • Request: Problem in Extraction of data from CRM to BW

    Hi Gurus I have problems in extracting the data from CRM to BW.I thought you are the one who can solve them: 1) When I check the data in the datasource in RSA3 i can see all records as well as i can see complete data in that but when i extract and ch

  • Console app not working

    I was getting some errors with Adium so I tried to run Console.app to see what the errors were. Strangely, when I run Console the dock starts to show the icon then it disappears and Console never opens. Using Terminal I have looked and /Library/Logs/

  • Building a dvd with custom disk size (disk, ISO, or dvd folder)

    My goal at the end of all this is to get a DVD format of video at 6mbps with menu's to be burned to a blu-ray 25GB disk. Using Encore CS6 on a Windows 7 (4.7Gzh 8-core, 16gb ram @2400mhz) 1st attempt:  I used a bluray disk and tried to burn a dvd for