Does this 3rd party drive work with PCI 7356?

Hi,
I bought PCI 7356 and AKD servo drive. However, it seems AKD can only achieve 15k rpm, which is lower than my target speed. I wonder if this drive, Analog Servo Drive S16A8 by Advanced Motion Control, will work with PCI 7356 controller. My motor is a brushless DC motor with 4-pole. I would like to run the motor at 30k rpm. The rated voltage for this motor is 24V and the rated current is 1.4A. The part number is BN12HS-13AA-02CH. I attach the spec sheet for the motor and the drive. Will this drive fit in my application? Thanks!
Chen Dan
Attachments:
S16A8.pdf ‏487 KB
bnhsseries.pdf ‏594 KB

Hello dandan9002
It looks like one of our customers, serkanb, is running into an issue trying to use this drive with a similar card to yours.
You can view his issue here.
http://forums.ni.com/t5/Motion-Control-and-Motor-Drives/Connecting-NI-7358-and-UMI-7774-to-a-sinusoi...
Which AKD drive do you currently have? Thank you for choosing National Instruments!
Sincerely,
Greg S.

Similar Messages

I have an iPhone 5. Which 3rd party apps work with Apple Health to record daily steps???

I have an iPhone 5. Which 3rd party apps work with Apple Health that sync with the daily steps data repository???

Iran uses GSM, so the iPhone 5 will work. It is already unlocked. Just put local Iranian SIM in phone.

Does this iPad 2 case work with the new iPad?

Would this iPad 2 case work with the new iPad, or any other similar cases that do?
http://www.amazon.co.uk/gp/product/B00545KFFQ/ref=pd_lpo_k2_dp_sr_3?pf_rd_p=1036 12307&pf_rd_s=lpo-top-stripe&pf_rd_t=201&pf_rd_i=B0050NG1PU&pf_rd_m=A3P5ROKL5A1O LE&pf_rd_r=1DFKVP1TXB9TEN4YGM61
Thanks for the help.

If it's made of rigid material (which I think is the case), then, most probably it won't. I certainly wouldn't pay 30 pounds for it just to find out it doesn't work.
As sagarpachorkar has stated, iPad 2 cases made of non-rigid materials, generally, have a much better chance of fitting the iPad 3 too.

Does the FOSS radeon driver work with the 7970M (RadeonSI Pitcairn)?

I did a search for the 7970M on the forums, but the only results were the ATI Lounge and a couple other very, very long threads (and the search didn't tell me where in the hundreds of pages the references for the 7970M were), so I figured I'd make a post and ask a direct question:
Does the radeon kernel module (foss driver) support the 7970M?
I've tried activating the radeon driver via vgaswitcheroo (echo DIS > /sys/kernel/debug/vgaswitcheroo/switch) but that just results in a black screen (which I can get out of by echo IGD the same thing).
I've had some moderate success using the fglrx module, but switching is iffy at best, and I've had some very strange results with running dual monitors on fglrx with the 7970m. I'm checking out options for using Bumblebee/Ironhide modified to work with fglrx (http://forums.gentoo.org/viewtopic-t-909802.html) , but before I do that I want to give a go at trying to get the radeon kernel module to play nice with the 7970M.
Thanks for any info!

Cool, thanks.
I see that PXP/Enduro (aka hybrid switching) is MOSTLY marked on the X.org chart -- does anyone have any experience getting the 7xxxM series to successfully switch with vgaswitcheroo? I'm running into a wall here -- whenever I do this
echo DIS > /sys/kernel/debug/vgaswitcheroo/switch
It just gives me a black screen until I switch back to IGD.
EDIT: I guess, at this time, it's not entirely possible due to limitations in X (which I kind of assumed): https://bugs.freedesktop.org/show_bug.cgi?id=37528
Which likely means that I'd have to do something along the lines of Bumblebee, which I believe has a radeon branch (amd-common)
Last edited by snowblind (2013-07-18 17:08:13)

Does LaCie 1TB Starck Drive work with AE?

I have heard that some drives don't play well with AE?
regards,
Matthos

Any hard drive with a USB connection should work with an Airport Extreme. Depending on what you want to do, it can be formatted for a Mac or PC. I'm not familiar with that particular drive (I have one of their Rugged models), but it gets good reviews.
If you're thinking of using it for Time Machine backups, though, see: Using Time Machine with an Airport Extreme Air Disk (or use the link in *User Tips* at the top of this forum).

Trying to get a 3rd Party Router working with BT I...

Hi,
I'm trying to move away from the HHub5 on our FTTC BT Infinity connection (40Mb/s). Eventually I settled on a TP-Link WDR 3600 N600 - the flavour which is happy to talk to cable modems and take an OpenWRT install.
So far I've hooked up a BT OpenReach "white box" modem using the HHub's RJ11 lead, going from the DSL filter into the OpenReach modem's DSL socket. The modem's DSL LED lights up solid green - which I presume is good? The TP-Link router is up & running fine with OpenWRT installed, I can connect to it over WiFi and I've hooked up its WAN connection to the OpenReach modem's LAN1 socket (LAN2 is blanked out).
But whatever I put in the router's PPPoE settings I just can't get an internet connection to come up. So far I've used '[email protected] (as it's set on the HHub) and a few other suggestions from the forums including 'anything you like' @btinternet.com and @btbroadband.com - nothing seems to get the connection going.
Is there something I've missed or can anyone suggest a solution?
Many thanks,
Steve
Solved!
Go to Solution.

Sorry to answer my own question, but in case it helps anyone in the future:
I had to put my username in the username AND password fields - same details in both. I've not seen this written anywhere online, everyone says to leave the password field blank as it's unused.
So to recap - this is what got my TP-LINK WDR3600 (OpenWRT based) router working with Infinity: stick [email protected] in the PPPoE usernamd AND password fields.
Steve

Screen Saver - 3rd Party to work with Mac OS X 10.4.11

I would like to purchase a third party Screen Saver that will work with my Mac Mini, OS X, 10.4.11. I would like a Screen Saver that will give me greater flexibility in displaying my photos; would allow each photo to remain on screen for a longer period of time then the existing software will allow and to have more options when transitioning from one photo to the next.

Get GraphicConverter gives even more options...
http://www.macupdate.com/info.php/id/263

Does this cardbus pcmcia card work with my powerbook?

Hi, The shop near my house only has this pcmcia cardbus USB 2 card.
http://www.conceptronic.net/site/desktopdefault.aspx?tabindex=0&tabid=200&Cat=30 &grp=3010&ar=0&Prod_ID=755&Prod=CSP480C2&subid=554#
My pbook only has USB 1, and I want USB 2 capability. Would the above work for the powerbook?

I don't see anything in its FAQ or Specs indicating it will or won't. That means it might, then again might not.
This card on the other hand has a known range of Mac OSes it supports:
http://www.keyspan.com/products/usb/u2cb2/homepage.2.reqs.spml

Softmotion using CANOpen/EtherCAT with 3rd party drives

Hi,
We have a LabVIEW application on Windows that is controlling 3 Bosch rexroth servodrives using CANOpen.
(Using Industrial Communications for CANOpen toolkit) and PCI-8531.
The application is controlling the 3 drives individually (no motion control / NC)
We would like to upgrade this application so that we can do motion control (combine the individual drives to make NC-movements).
I found this link : softmotion using CANOpen : http://sine.ni.com/nips/cds/view/p/lang/nl/nid/201873
However this is only with certain 3rd party servodrives. Is there a solution for other CiA DSP 402 compliant servodrives?
Is my only alternative to switch to EtherCAT servodrives and use the NI SoftMotion for EtherCAT?
Will this work with any 3rd party ethercat drive (in this case Bosch Rexroth Indradrive Cs)?
Thanks!

Hi Thomas,
1) The NI Softmotion Controller for CANopen is no longer a sold product and therefore would not be a viable upgrade path.
However, there are Third Party Add-Ons (developed by partners) that are written for CiA402 compliant devices.
The first example I found was the following one:
http://sine.ni.com/nips/cds/view/p/lang/nl/nid/210877
If you want to verify if this 3rd party toolkit also support your CANOpen Modules, then you should verify this with the 3rd party.
2) If you are planning to use the NI SoftMotion Module, then the following table can be useful in determining which HW/SW combinations will work (eg. EtherCAT):
http://digital.ni.com/public.nsf/allkb/5F019205291BF02686257A07007D1B06?OpenDocument
Aside from which interface you are going to use (eg. EtherCAT, ...) it would be also important to keep in mind the NI Hardware set-up you are going to use (eg. cRIO).
Using the NI SoftMotion Module for specific Interfaces imposes some requirements for the type of hardware that can/should be used:
http://zone.ni.com/reference/en-XX/help/371093T-01/mclvhowto/smrequirements/
http://zone.ni.com/reference/en-XX/help/371093T-01/mclvhowto/motionprojectresourcesecatdrive/
One of the first requirements for this would be that you have to use a Real-Time Controller.
One solution to accomplish this could be to use a cRIO with an EtherCAT port and connect an etherCAT based drive to it (eg. AKD drive).

Can't sign in using any 3rd party email client with my iCloud account on any Mac. Tried every settings, My iCloud only works with Mail.app

Can't sign in using any 3rd party email client with my iCloud account on any Mac or any other Mac. My iCloud will only work with Mail.app. All the clients I tried work perfectly well as long as I sign in with somebody else's iCloud account. But mine won't work no matter the client (Postbox, Unibox, Airmail...) and no matter the computer.
I can access my account on iCloud.com, but I can't use email clients without getting error messages prompting me to check my password or login.
I was able to use those clients in the past but a couple of months ago I got logged out of Airmail and the issue started just like that!
I tried every possible mail server settings including the following:
IMAP information for the incoming mail server
Server name: imap.mail.me.com
SSL Required: Yes
If you receive errors when using SSL, try using TLS instead.
Port: 993
Username: The name part of your iCloud email address (for example, emilyparker, not [email protected])
Password: Your iCloud password
SMTP information for the outgoing mail server
Server name: smtp.mail.me.com
SSL Required: Yes
If you receive errors when using SSL, try using TLS instead.
Port: 587
SMTP Authentication Required: Yes
Username: Your full iCloud email address (for example, [email protected], not emilyparker)
Password: Your iCloud password

Those are the correct settings, and they work with any email client that supports Imap.
Try again.

Autofill in Google Toolbar does not appear to be working with Firefox 4 - Aways saying Autofill not available for this page even on pages I have used it before FF4 upgrade

Autofill in Google Toolbar does not appear to be working with Firefox 4 - It aways gives the message "Autofill not available for this page". This is happening on pages I have used Autofill on before upgrading to FF4 from Firefox 3.5.x

i did not see a solution posted - I tired what I read. Going back to an old version may solve the problem but it is a stupid solution so I have yet to do that.
I am on version 4 and autofil this does not work :
Popular answer Go to this answer
Uninstall version 5, then Google "google toolbar version 4", follow the link to FileHippo.com, and download and install the last version 4. When you reinstall it, make sure you turn off the option to perform automatic updates.
6 of 7 people found this answer helpful. Did you? Sign in to vote. Report abuse

When I try to turn on my 27'' iMac I get a circle that appears with a line through it does this mean my Drive is shot?

when I try to turn on my 27'' iMac I get a circle that appears with a line through it does this mean my Drive is shot?

Not necessarily. We use a product called Scannerz to test hard drives. They have a book on hard drive troubleshooting that you can download here:
http://scsc-online.com/Downloads.html
Scroll to the bottom of the web page and download the Hard Drive Troubleshooting book. You won't want to read the whole thing, just the section describing your problem. Most of the stuff they describe in their "advanced" section requires unit disassembly, and the way that section is written I think they're assuming people know how to take units apart without any instructions - in other words it's not written "for the rest of us." Most of the resets they describe that you might need can be done by anyone.
If you end up buying Scannerz, I would NOT recommend Scannerz-Lite, I'd go with Scannerz with FSE-Lite. It costs about $14.00 more but they keep enhancing the product and adding more applications to it, all free if you own Scannerz w/FSE or FSE-Lite. I'd also avoid FSE all together unless you know a fair amount about the operating system, files, processes, Unix type path names, etc. etc.
If you're lucky that will end up being nothing more than a reset.

I just purchased a chromebook, does CC Photoshop and lightroom work with this computer?

Does photoshop cc and lightroom work with a chrombeook?

No. Adobe software only works with Windows and Apple OS X operating systems.
Chromebook runs the Chrome operating system.
You get apps for the Chromebook from the Chrome Web Store Chrome Web Store apps
Adobe is working on a streaming version of Photoshop for Chrome but it's still being tested.
Adobe's got Photoshop running in Chrome | The Verge

Archive & Install leaves 3rd Party Apps (some with probs)

I've been on the phone with AppleCare two times about this. Here's the bottom line:
I installed Leopard (just the default upgrade) and the 10.5.1 upgrade. All was ok for a while. All programs (including 3rd party) were working. Then I took the laptop in to the Genius bar because I thought I had a battery problem and the system seemed sluggish. They ran Disk Utility from their store server which was NOT running Leopard and repaired permissions on my laptop from there. Then they ran Disk Utility from my computer (Leopard 10.5.1) and sent me on my way since the disk verified ok. Then the problems started:
1. Desktop Wallpaper was discarded and replaced by default
2. Printers disappeared and could not produce PDFs via an Adobe PDF printer
3. A 3rd party wordprocessor (Mellel) would not open existing documents and would not open a new document (no blank page, no error, nothing)
AppleCare instructed me to re-install Leopard with "Archive & Install" but warned that I would have to reinstall (most) third party programs. Trouble is, all my programs remained. The Adobe PDF printer problem was resolved, but the Mellel problem persisted. I called AppleCare again and they were perplexed as to how an Archive & Install could still have all the apps in the regular Application folder (and of course the icons in the dock too). The "Previous Systems" folder from the Archive seemed incomplete to them, so they suggested that the install was compromised somehow and to do another "Archive & Install." The goal would be to have another "Previous System" folder from the archive, and a clean Application folder with no third party software in it.
Well, 3 hours later, I have a re-installed Leopard and I still have all my applications (and of course, Mellel still does not work).
So, any suggestions out there? Are my installation disks messed up or should I go ahead and wipe the disk and start completely from scratch? I've got my library archived and my documents backed up. Anything else I should do if the recommendation is that I wipe it clean?
Karyn

OK, here is the "resolution" of the issue.
1. The issue was finally decided to be the fact that the Genius Bar used a non-Leopard system to do the Permissions Repair on a Leopard system. Apparently, 10.4 and 10.5 handle the repairs differently. Leopard actually also takes much longer. Apple Support (phone) said that 10.4 checks things differently and can alter/repair items that can make them unable to be understood by 10.5. This was the original issue which then led to me not being able to use my third party applications and to losing network settings and printer settings. Then because Apple Support kept having me do an Archive and Install preserving User settings the corrupted information kept perpetuating itself. The solution (unfortunately) was to do an Erase and Install and lose all the user settings. I called the Genius Bar at the retail location where I went last Monday to make sure they were aware of this issue so that other people do not waste as much time as I did this week on computer issues. I am mostly upset because this was a very preventable issue and I didn't need to lose so much work time right before the holidays. The Genius folks should have known better!
2. An option when doing Erase and Install is to migrate a backup from Time Machine. Since I had nothing to lose the Apple Support folks suggested that I use that option, so I tried that. I used a Time Machine backup which was prior to the issue with the Genius Bar. Unbelievably, it seems to have worked. At least I am back to just the issues (sluggishness) that I had when I started going to the Genius Bar.
Thanks for all your ideas and help in narrowing down the issue.

Please could you tell me what DLT/SDLT/Ultrium series drive works with Sun Fire V880 with SCSI Sun X

Please could you tell me what DLT/SDLT/Ultrium series drive works with Sun Fire V880 with SCSI Sun X6540A?
The question is URGENT because we need to do backup/restore of our Databases but we have not backup device...
We want to buy it but we don't know what exactly drives we can choose for our Sun with X6540A SCSI card.

Hello,
the X6540A is a Dual Single-Ended Ultra/Wide SCSI (PCI) controller. The controller is only upto 40MB/sec, which might be suficient for a SDLT600 or LTO-2.
Every Single-Ended SCSI device works with this card, but performance would be low when using LVD/SE devices (some LVD devices can't operate in SE mode!)
I would suggest that you call Sun Sales.
I guess that the PCI/PCI-X Dual Ultra320 SCSI Adapter (SG-XPCI2SCSI-LM320) or PCI Dual Ultra3 SCSI Host Adapter (LVD) (X6758A) are a better choice if attaching more recent drives.
This is the Sun Fire V880 - Full Components List.
Michael

Does this 3rd party drive work with PCI 7356?

Similar Messages

Maybe you are looking for