Does this forum use JSF?

I'm a little worried because the posting function works in IE, but not my version of Firefox, 1.0.3. Am I to look forwad to aggrivating compatibility issues?

knowledgenotebook,
I believe the (general) Design forum is a better place to ask (many (of the same) natives turn up both here and there).
http://forums.adobe.com/community/design_development/design

Similar Messages

Multitasking bar? Does this constantly use data?

Hi,
Unfortunetly AT&T did away with their unlimated data feature so I'm stuck with the 2gb per month plan. My question is when I leave an app in the multitask bar does this constantly use my data? I have notifications turned off and I have my mail set up for me to manually load it. It's becoming a pain to have to keep an eye on which apps are running and to not be able to shut the app completely down when I close it, instead I'm going to my MTB every 10 min. to kill apps.
Thank you!

I popped into the AT&T store this afternoon and confirmed that I could keep my unlimited plan and still have a family plan. Which is nice, not sure I need it but it does offer another choice.
I've been relatively uninspired by AT&T's service in my area and researching changing to the Droid X as well. It does have a few features that are attractive like a replaceable battery, storage on a replaceable card and so on. The display on the iPhone 4 is simply amazing though and I already prefer the interface of the iPhone to the Droids, so it's probably going to be an upgrade instead of a switch of providers.
The video conferencing on the iPhone is a nice feature but since it's required to be over wifi on each connection, the chances of both my wife and myself being on wifi at the same time unless we're in the house together are slim to none and slim left town. So, great feature, not very practical.
I did find one thing unique today, the sales guy at AT&T had his own iPhone 4 and we did a couple of speed tests while I was there vs my 3GS. Now we were both on 3G at the time and really the speeds should have been almost identical as the processor should have nothing to do with the transmission speed over 3G but his phone blew mine away. A bit on the download but a huge amount on the upload. Kind of makes me wonder if there's been something wrong with my 3Gs that I wasn't really aware of?

Does this forum suck for you too?

I don't mean the content. I find these Flash forums very
useful and helpful. It's the performance of the actual forum site
that makes me increasingly want to avoid this place. Click any
thread and it may or may not load, and when it does (often on the
3rd or 4th attempt) it takes between 30 and 90 seconds to load. I
note that many newcomers to this forum post the identical messages
3 or 4 times, probably because the molasses-slow performance makes
them worry their message didn't get posted. Am I the only one this
is happening to? If not, has it gotten gradually worse and worse
for you over the past couple weeks?
It's very frustrating because I enjoy learning and
contributing to the discussions here. I just want to find out if
it's a problem for me alone.
I'm using latest IE and Firefox on a clear, unshared 6MB
broadband connection. No problems with any other forums on the web,
just this one.

I have noticed that the forum (and only this one for me) has
been increasingly slow in the last day or two. Looks like it is
time for them to do some pruning, heh. And as it seems, something
seems to keep refreshing on this forum bout every 15 secs or so. If
it is not just me, then that might be contributing to the problem.
Anyways, back to hoping for an answer to the question I posted.
And, btw, personally I stay away from using email clients for
just about anything but an intranet, due to a large portion of
viruses dedicated to mail clients....specially Microsoft made
ones.

How to implement this interface using jsf

This problem's been bothering me for serval days.
Just a simple question, how to render the following case purely by JSF?
http://www.hcj-sh.com/temp/case.gif
case 1.
It includes 2 radio button2, these 2 radios are in virtual layout, this is not different,
but I need attach other items(such as input text filed, select menu... etc) after each
radio button,,,,,
case 2.
5 raidos, 3 one the first row, and the others 2 on the second row....
I had sleep on it for a long time, but still no answer...
anyone can help me?
Thanks a lot.

I am not sure what you mean by case.? do you want to
insert other components between the radio buttons ? in
that case why don't you make them as two separate
lists ?yes, I want to insert other components between the 2 radio buttons.
the 2 raido buttons are in the same group, check one will auto uncheck another,
so i think two spearate lists is not fit my require.
For case 2, try using two SelectItemGroups, one for
each set of radio buttons and see if that gives you
the layout you want.SelectitemGroups? i donot found this tag in JSF, can you tell me more about it
Thanks.
David

Why does this forum open in a window without the menu bar ?

When coming to this forum trough the " Access the Java Studio Creator Community Forum" link on the "Java Studio Creator Forums" page, it opens a browser window without the menu bar. I understand that Sun thinks it's better for me not to have the menu bar, but I personally prefer to have it. What I prefer over everything else is to have the choice.
By the way, one of the reason I prefer Sun products over Microsoft products is that I generally can choose what is better for me. Like to have or have not a menu bar, or to have my IDE in english rather that in french. (By the way, this last issue has been solved ;-))

Use this direct URL, you can have the menu bar still --
http://swforum.sun.com/jive/forum.jspa?forumID=123
Thanks,
Sakthi

Does this forum cover UI design for an app as well?

Because the objective is so different web design and UI design are two related topics... I don't seem to see a separate forum for UI design, does that mean this forum would cover app UI design as well?
Thanks.
knowledgenotebook

knowledgenotebook,
I believe the (general) Design forum is a better place to ask (many (of the same) natives turn up both here and there).
http://forums.adobe.com/community/design_development/design

HOW DOES THIS FORUM WORK?

I'd be interested to know how this forum works - are there any moderators who read the posts. I posted earlier today regarding a problem I have on my printer - it hasn't even been viewed.
Quite frankly I'm feeling extremely let down by HP recently. I've always been an HP printer fan but I'm starting to wonder if it really is worth ALL my time and effort - Epson reviews next on th list!!!!

Cook book techs.
Follow a logic tree and hope that the questions asked were for the actual problem. The real problem is that words mean things and if we each have our own meaning.
Freeze--- 5 minutes I see no change? 10 minutes? 2 days later the computer has not done anything?
Hangs up - - no change in 5 minutes? no change in 10 minutes? no change in 30 seconds? 2 days later the screen is different it turned it's self off.
hesitates - - no change in 30 seconds, 5 minutes, 10 minutes, 2 tv shows later there is something different.
I am a patient person. Hesitates no change 30 seconds; hangs 2 tv shows later; and freeze 2 days later. Some one else may react differently 2 seconds for hesitates, 30 seconds hangs, freezes 31 seconds.
So the cook book teck may ask whats your problem give you 4 answers to choose from. And each of us may give different answers from our unique prospective. Me it was hangs up where the same problem may be a hesitation or a freeze to another. Of course then the teck decides to enter another answer cos she don't think you know what you are talking about....
C'est la Vie. And they might be in Corvallis Oregon

Why does this forum perform much slower than form forum in metalink?

I feel strongly that this forum performs much slower than the form forum in metalink where there are even more active and more issues created there.
I don't know why Oracle creates two form forum, which one is faster and another one is slower.
What is the difference b/w them besides here is jsp pages and over there is plsql pages?

Oracle certainly allows you to have users that do not have roles. Or users that don't have any system privileges. Or users that don't have any object privileges.
If you want the query to return a row for every row in DBA_USERS, you would need to outer join all the other tables to DBA_USERS.
Justin

HT204088 Why can't you print a cd jewel case listing of songs using iTunes. Is there some other way of doing this without using iTunes?

Why can't you print a cd jewel case listing of songs using iTunes. Is there some other way to do this without using iTunes?

Hi spider1950,
As long as you have the most recent update of iTunes (11.0.4), you should be able to print a jewel case insert directly from iTunes. You may find the following page useful:
Apple Support: Print CD Inserts
https://www.apple.com/findouthow/music/itunes.html#makecd-printinserts
Regards,
- Brenden

What does this odd use of NVL in a comparison do?

The TOAD query optimizer recommended changing this test:
(NOT (sites.pay_site_flag = 'N' AND sites.purchasing_site_flag = 'Y'))
to this:
(sites.pay_site_flag <> NVL ('N', UID) OR sites.purchasing_sige_flag <> 'Y')
both sites.pay_site_flag and sites.purchasing_site_flag allow nulls, so the logical contrapositive is not valid.
Testing seems to show that the query optimizer test returns the same result as the original test, but why? I don't understand how NVL ('N', UID) can ever evaluate to anything but 'N', and how can that be useful in this comparison?
Edited by: Pete Hall on May 6, 2012 10:32 AM
Edited by: Pete Hall on May 6, 2012 11:12 AM
Edited by: Pete Hall on May 6, 2012 11:13 AM

>
That's true, and I did construct the truth table. It's equally true, if I substitute a literal 'N' in place of NVL ('N', UID), so what subtle difference does it make if the NVL function is used instead of the literal 'N'? I suppose it's possible that the TOAD optimizer just pulled that out of the air for no reason, but it seems unlikely.
>
For this example the use of NVL appears to be unnecessary. Can't tell for certain since the example that uses NVL also uses 'UID' which isn't explained anywhere; where did TOAD come up with 'UID'?
The most likely explanation is that the template that TOAD uses includes NVL to handle cases where the NVL actually is necessary. And for cases where NVL isn't needed, and doesn't alter the results, it doesn't matter if it is left in. That could allow TOAD to use one template for all use cases rather than add code to determine the use cases where NVL isn't needed.
Note that your original example
(NOT (sites.pay_site_flag = 'N' AND sites.purchasing_site_flag = 'Y'))is often misinterpreted as meaning the NEGATION of the inner AND condition but testing will show that it is not. You should always use a truth table and full testing to make sure you get exactly what you want.
Since there are two variables and they can each have three values there are nine possible combinations
with q as (SELECT 1 TEST, 'N' PFLAG, 'Y' SFLAG FROM DUAL
           UNION ALL
           SELECT 2 TEST, 'Y' PFLAG, 'Y' SFLAG FROM DUAL
           UNION ALL
           SELECT 3 TEST, NULL PFLAG, 'Y' SFLAG FROM DUAL
           UNION ALL
           SELECT 4 TEST, 'N' PFLAG, 'N' SFLAG FROM DUAL
           UNION ALL
           SELECT 5 TEST, 'Y' PFLAG, 'N' SFLAG FROM DUAL
           UNION ALL
           SELECT 6 TEST, NULL PFLAG, 'N' SFLAG FROM DUAL
           UNION ALL
           SELECT 7 TEST, 'N' PFLAG, NULL SFLAG FROM DUAL
           UNION ALL
           SELECT 8 TEST, 'Y' PFLAG, NULL SFLAG FROM DUAL
           UNION ALL
           SELECT 9 TEST, NULL PFLAG, NULL SFLAG FROM DUAL
SELECT * FROM Q WHERE
   (NOT (PFLAG = 'N' AND SFLAG = 'Y'))
TEST,PFLAG,SFLAG
2,Y,Y
4,N,N
5,Y,N
6,,N
8,Y,
              The inner AND condition
   (PFLAG = 'N' AND SFLAG = 'Y')is TEST #1 of 9 possible combinations.
It is natural to think that if you negate that with the NOT condition that you should get records that correspond to the other 8 conditions.
But if you look at the above results you can see that you only get results matching tests 2, 4, 5, 6 and 8.
Those DO NOT include tests 3 (PFLAG IS NULL and SFLAG = 'Y'), 7 (PFLAG = 'N' but SFLAG IS NULL) or 9 (both flags are NULL).
That is the way NULLs can affect things.
If you really need the NEGATION of the inner AND condition you need to specifically code for the null value combinations.
to mean 'include all records with pay_site_flag IN (null, 'Y') OR purchasing_site_flag IN (null, 'N') but that is NOT what your condition does.
The example provides
If you did the truth table and testing

How does this forum works?

Forum members come up with suggestions and report defects all the time. But the question is: where does our suggestions and reports go? Will Sony looking to our discussion here and improve our phones with every update or we just talking to each other ?

@yasser4008 again, where do you get those numbers, the users that post here on the forum do NOT represent all the Xperia owners, think about this, the forum is for users to reach out for help, users that don't have any issues won't post here something like:
I don't have any issues with my phone, my screen is fine, etc etc
you said:
@yasser4008
yasser4008 wrote:
They should offer glass panel replacement for lifetime as Htc and LG does. I don't know why this piece of glass is so expensive to replace.and the worse part they will crack again
On the link that you provided www.htc.com/us/advantage/ it says:
OU CAN COUNT ON HTC INNOVATIVE HTC ADVANTAGE PROGRAM. FOR YOU. EXCLUSIVELY FROM HTC.
Cracked screen? Free one time screen replacement within first 6 months.
It is NOT lifetime, which support my claim that you are exaggerating.
Also, have you checked HTC, LG, Apple, Samsung, etc forums? I don't think you have, check what is the number 1 complain regarding phones breaking down, check what is the number one repair procedure.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Unable to insert images in this forum using Mac OS

I was unable to insert images using safari or firefox. I can navigate to the desired image but cannot choose it (its grayed out).
Tried files with different extensions such as .png .jpg .jpeg .tiff .bmp but to no avail.
Any ideas?

Hi guys,
I'm testing this with my Mac.
Cheers!
KarlaDJR
Attachments:
hp-envy-17-3d.jpg ‏50 KB

Why does this loop used to write values to the parallel port keep going forever?

Have a look at this VI guys. I'm trying to send a sequence of bits (used to trigger an IC). I'm interested in the last bit of the data port (D0). so I'm sending either 0 or 1 to that pin to trigger the IC. it works, but the problem is that the loop keeps going forever and i cant control it. if i send 3 to the loop count, I'm expecting to get: 1 0 1 0 1 0, but it doesnt stop and keeps going forever.
It seems that the problem is not with the loop. because i deleted the loop and just left the flat sequence so that it executes only once, but still it keeps repeating. How can i make the flat sequence execute only once?
I'm using a parallel port monitor (parmon.exe) and a LED connected to D0 of the parallel port to check.
If anybody has an alternative or better method to send the bits to the parallel port, I'd be very thankful.Message Edited by krayzie on 05-14-2005 04:33 PM
Attachments:
pport.vi ‏24 KB

It works just fine here. Place an indicator to the iteration terminal [i] to watch how things progress. Do the number ever increase above N-1 to what you wire to N? I don't think so!
Also make sure you don't run the VI with the "Continuous run" button. In this case the VI would immediately restart whenever it is finished. use the "Run" button.
LabVIEW Champion . Do more with less code and in less time .

Is there a way of doing this without using an inner class

hi, i have developed a tree applet but it takes ages to load on my machine. I was wondering if i could get rid of the inner class that is created when "valuechanged" is called (line 28). I am posting my whole code, i hope someone can help. Cheers Rups
[email protected]
import java.awt.*;
import javax.swing.*;
import javax.swing.tree.*;
import javax.swing.event.TreeSelectionListener;
import javax.swing.event.TreeSelectionEvent;
import java.net.*;
import java.applet.AppletContext;
import java.util.Enumeration;
public class SimpleTree extends JApplet {
JTree tree = new JTree();
public void init() {
   new SimpleTree();
public SimpleTree() {
// WindowUtilities.setNativeLookAndFeel();
    Container content = getContentPane();
    Object[] hierarchy =
      { "Some Useful Web Links ",
        new Object[] { "Microsft","http://www.microsfot.com"},
        new Object[]{"Yahoo", "http://www.yahoo.com"}
    DefaultMutableTreeNode root = processHierarchy(hierarchy);
    final JTree tree = new JTree(root);
    tree.getSelectionModel().setSelectionMode(TreeSelectionModel.SINGLE_TREE_SELECTION);
    tree.addTreeSelectionListener(new TreeSelectionListener() {
    public void valueChanged(TreeSelectionEvent e) {
    DefaultMutableTreeNode node = (DefaultMutableTreeNode)
    tree.getLastSelectedPathComponent();
    String hoopla = tree.getLastSelectedPathComponent().toString();
    if (node == null) return;
    if (node.isLeaf()) {
       try {
           getAppletContext().showDocument(new URL("file://c:/webstuff/"+hoopla),
"viewer1");
         }catch(Exception f) {
            System.out.println("" + f);
    content.add(new JScrollPane(tree), BorderLayout.CENTER);
    setVisible(true);
public DefaultMutableTreeNode processHierarchy(Object[] hierarchy) {
    DefaultMutableTreeNode node =
      new DefaultMutableTreeNode(hierarchy[0]);
    DefaultMutableTreeNode child;
    for(int i=1; i<hierarchy.length; i++) {
      Object nodeSpecifier = hierarchy;
if (nodeSpecifier instanceof Object[]) // Ie node with children
child = processHierarchy((Object[])nodeSpecifier);
else
child = new DefaultMutableTreeNode(nodeSpecifier); // Ie Leaf
node.add(child);
return(node);
public static void main(String [] args) {
JFrame f = new JFrame("") ;
Container contentPane = f.getContentPane();
contentPane.setLayout(new FlowLayout());
SimpleTree ta = new SimpleTree() ;
ta.init() ;
f.addWindowListener(new ExitListener());
f.setSize(250,500);
contentPane.add(ta,BorderLayout.CENTER);
f.setVisible(true) ;

import java.awt.*;
import javax.swing.*;
import javax.swing.tree.*;
import javax.swing.event.TreeSelectionListener;
import javax.swing.event.TreeSelectionEvent;
import java.net.*;
import java.applet.AppletContext;
import java.util.Enumeration;
public class SimpleTree extends JApplet implements TreeSelectionListener {
      JTree tree = new JTree();
      public void init() {
      new SimpleTree();
      public SimpleTree() {
// WindowUtilities.setNativeLookAndFeel();
      Container content = getContentPane();
      Object[] hierarchy =
      { "Some Useful Web Links ",
        new Object[] { "Microsft","http://www.microsfot.com"},
        new Object[]{"Yahoo", "http://www.yahoo.com"}
      DefaultMutableTreeNode root = processHierarchy(hierarchy);
      final JTree tree = new JTree(root);
      tree.getSelectionModel().setSelectionMode(TreeSelectionModel.SINGLE_TREE_SELECTION);
      tree.addTreeSelectionListener( this );
        tree.addTreeSelectionListener(new TreeSelectionListener() {
        public void valueChanged(TreeSelectionEvent e) {
        DefaultMutableTreeNode node = (DefaultMutableTreeNode)
        tree.getLastSelectedPathComponent();
        String hoopla = tree.getLastSelectedPathComponent().toString();
        if (node == null) return;
        if (node.isLeaf()) {
        try {
        getAppletContext().showDocument(new URL("file://c:/webstuff/"+hoopla),
        "viewer1");
        }catch(Exception f) {
        System.out.println("" + f);
      content.add(new JScrollPane(tree), BorderLayout.CENTER);
      setVisible(true);
      public void valueChanged(TreeSelectionEvent e) {
      DefaultMutableTreeNode node = (DefaultMutableTreeNode)
         tree.getLastSelectedPathComponent();
      String hoopla = tree.getLastSelectedPathComponent().toString();
      if (node == null) return;
      if (node.isLeaf()) {
         try {
            getAppletContext().showDocument(new URL("file://c:/webstuff/"+hoopla),
                                "viewer1");
         }catch(Exception f) {
            System.out.println("" + f);
      public DefaultMutableTreeNode processHierarchy(Object[] hierarchy) {
      DefaultMutableTreeNode node =
         new DefaultMutableTreeNode(hierarchy[0]);
      DefaultMutableTreeNode child;
      for(int i=1; i<hierarchy.length; i++) {
         Object nodeSpecifier = hierarchy[ i ];
         if (nodeSpecifier instanceof Object[]) // Ie node with children
            child = processHierarchy((Object[])nodeSpecifier);
         else
            child = new DefaultMutableTreeNode(nodeSpecifier); // Ie Leaf
         node.add(child);
      return(node);
      public static void main(String [] args) {
      JFrame f = new JFrame("") ;
      Container contentPane = f.getContentPane();
      contentPane.setLayout(new FlowLayout());
      SimpleTree ta = new SimpleTree() ;
      ta.init() ;
//      f.addWindowListener(new ExitListener());
      f.setSize(250,500);
      contentPane.add(ta,BorderLayout.CENTER);
      f.setVisible(true) ;
}

Why does this forum page look like this?

It's only in Safari. It's fine in IE 11.
It's only the Boot Camp forum page too, no other

Thanks that seems to have cured it
I wonder what that's about?

Does this forum use JSF?

Similar Messages

Maybe you are looking for