Does this support EAP? LEAP? PEAP? Web Authentication?

I am trying to access my college network at Baruch, and its not letting me get pass the authentication. Safari just freezes. Is the iPAD EAP compliant? The iPhone works fine. If its not, is Apple working on a fix?
Honestly for a an app to promote keynotes, logging into a clients network before a presentation, I see huge problems with this. What if the client uses web authentication to have to access Wifi. Is there a fix around this?
Thanks

i assume eap types are supported just like on an iphone. if you manually configure to connect to a wireless network are wpa/2 enterprise choices listed? if so that implies eap support.
i believe i saw other complaints about web auth not working. i assume that's an issue with ipad safari not being able to interpret the web auth page coming from the wireless access point/controller.
i'm unclear on what your trying to connect to. a wlan using web auth or leap/peap/etc? they are usually not used together.

Similar Messages

From iPad with iOS 7.1 to a HP Officejet 6500 E709n Series printer does this support airPrint

From iPad with iOS 7.1
to a HP Officejet 6500 E709n Series printer
does this support airPrint?

My error.
I did not see the printer listed on the Airprint list and then added the other.
I will edit accordinging.
Apologies.
Click the Kudos Thumbs-Up!
It is a nice way to say “Thank You" for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

WRVS4400N Does it support EAP-TLS

Hi our business was looking at purchasing one of these Cisco routers and were curious if it supported WPA2 EAP-TLS?

Jon,
According to the Data Sheet:
Port-based RADIUS authentication (Extensible Authentication Protocol multicast distributed switching [EAP-MDS], Protected Extensible Authentication Protocol [PEAP])
http://www.cisco.com/en/US/prod/collateral/routers/ps9923/ps9931/data_sheet_c78-496737.html

Does this support Iphone(3G) from Sprint?

I have a iphone from sprint and I have been watching video on youtube all the time. But yesterday I could not watch video anymore because youtube does not support my cell phone device anymore?
So, my question is does this flash player support my iphone from sprint?
what shall I do to watch video on youtube just like before?

FCPX doesn't import AVCHD files from my Panasonic GH-2, even though importing works perfectly into iMovie. So just because camera X imports natively into iMovie, it isn't certain it will import natively into FCPX.
iMovie archives will always import because the AVCHD has already been converted to ProRes on import.
In FCPX the AVCHD files from say a GH-2 can be edited natively if you don't want to re-render into ProRes, but to date I can't import them to test this.
Chris.

694D Pro2(-IR?) How big HD does this support?

I got a 694D Pro2 motherboard, and I wounder how big hard disk this supports. I thinking about a western digital 8mb cach 120GB, 160GB or 200GB disk.
I also wounder why I got a message that says:
"WARNING! CPU has been changed"
"Please Enter CPU Speed CMOS Setup and Remember to Save Before Exit!"
This message has always comed up since I bought the motherboard, and if i fix it in the bios, it would be the same after I power off my computer. The computer works fine still with this message, but I havto press F1 every time I sould boot my computer.
Odbjørn Bakke
Norway

Here's your answer to the HDD support Qns, you've to go into HDD Support link in this page.
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=84
Next, the speed indication for the CPU is being changed in Softmenu BIOS, but don't worry, it will not do damage to your system. All you've to do is to know what CPU you are running on now, i.e, Dual Intel Pentium III 800 CPU @ 100MHz, then you've to selected this indication from the list in your BIOS. I've had encounter this similar problem on my friend's old P3 running on his ASUS mobo and it's only indication error.
All the Best... :D!!!

Firefox sucks and apparently so does this "support site"

So originally, Firefox 11 was annoying me by adding an unsolicited homepage to my tabs every time I start the stupid thing, demanding that I should update a variety of plugins that I don't need to disable but don't care to upgrade until I actually need to. I started a query about that.
Then this support site very "helpfully" decided to throw an error and delete my whole post.
I have no reason to upgrade Firefox and no reason to update or delete the 3 or 4 addons that Firefox keeps whining about. This thing is just a mongoloid following me around offering helpful advice about how tasty spaghetti is while I'm at work.
How do I make this idiot stop "helping" me?

this new "support site" really sucks.
a recent running thread was closed -
http://support.mozilla.org/en-US/questions/938821
no idea why, it reflected my question which is still
unsolved there. wth am I supposed to ask a new question
choosing from pre-picked topics like in Ebay if its already
there? mozilla, our pal in the dark IE ages - now same
impatience and bossyness as MS?
anyway, it was nice to see in this thread that in the year 2013
many users are still on the good old 3.6.4 sniffing and esp. sync
free version. where an alternative flash player still gets you most of youtubes which made Adobe's bloat- and spyware redundant for
several years now.
mozillas - please stop giving answers nobody asked for and respect Netscape's heritage of a free '''AND''' independent browser at the
same time!
Damian

Does E71 support EAP Enterprise?

I'm trying to connect my E71 to work's network. It uses a WPA/WPA2 with EAP-Enterprise authentication method.
My colleague uses an iPhone and setup was easy enough to choose 'EAP-Enterprise' and enter user + password. The certificate get sent to his phone and its all done.
How is this done with the E71?

20-Dec-2008 06:15 AM
sanjaymehta wrote:
3. Even if you do get the certificate and have the right EAP support, you might not be able to log on to the network. I've tried to log in using EAP-GTC and the phone just doesn't give me
enough time to enter the password.
I think that the reason why you are not getting enough time to enter your EAP-GTC password on the phone UI is more likely caused by the impatient WLAN access point behaviour than something being wrong on the phone side.
Some WLAN access points are by default configured to expect EAP authentication response packets from the client within a few seconds from the request that AP sends to client. Typically after AP's EAP response timeout occurs AP will trigger new EAP authentication sequence towards the client, causing yet another EAP-GTC password query on the client that user has again not enough time to answer properly.
This type of AP behaviour will cause a loop of consecutive password queries on the client side, which is especially problematic for such EAP authentication methods requiring user to enter their username/password credentials (i.e. GTC as well as MSCHAPv2 and LEAP in case credentials were not saved in advance in to the IAP settings).
Depending on the WLAN access point you might be able to adjust your AP's EAP timeout (sometimes referred as 802.1x) parameters so that AP will provide EAP clients more time to respond before initiating new (retry) authentication sequence. You could check your WLAN AP for a setting named something like "EAP timeout", "802.1x timeout" or similar and try increasing this value assuming such configuration parameter is available.
Another potential workaround (if your authentication infrastructure supports it and you are not using one-time-passwords) is to use PEAP or TTLS with MSCHAPv2 instead of EAP-GTC and save your MSCHAPv2 username/password credentials into the phone's IAP settings beforehand, which removes the need of password entry during the EAP authentication process.

In Firefox version 37.0 getting Secure Connection Failed config parameter version.fallback-limit set to 3. Does this support TLS 1.0 .

In FF 37.0 getting secure connection failed connecting to a website. Works fine in previous version. Config parameter version.fallback-limit default setting is 3. In previous version the default setting was 1. Does the setting version.fallback-limit to 3 mean only TLS1.2 is supported. Any help is appreciated.
Secure Connection Failed
The connection to xxxx.xxx.com was interrupted while the page was loading.
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
Thx,

The website may try to fallback to TLS 1.0 in a way that is no longer allowed in current releases or may be using a deprecated cipher suite.
You can open the <b>about:config</b> page via the location/address bar and use its search bar to locate this pref:
*security.tls.insecure_fallback_hosts
You can double-click the line to modify the pref and add the domain (full domain) to this pref.
If there are already websites (domains) in this list then add a comma and the new domain (no spaces).
You should only see domains separated by a comma in the value column.
See also:
*https://developer.mozilla.org/en-US/Firefox/Releases/36/Site_Compatibility#Security
*https://developer.mozilla.org/en-US/Firefox/Releases/37/Site_Compatibility#Security

Does Numbers support importing dynamic XML web data into spreadshit?

I am trying to find a similar functionality that I've been using in MS Excel (Windows platform). In excel, I am able to import an xml (residing in the cloud) into a sheet and work on data and update the base data whenever I request.
Is there a similar feature in Numbers, or in Mac OS where I can work with XML data residing in the web.
Note: Although Windows version of Excel supports this, Mac version does not. Is this some kind of OS limitation?
Thanks,

In Numbers '09 there is the function HYPERLINK() described as:
HYPERLINK
The HYPERLINK function creates a clickable link that opens a webpage or new email message.
HYPERLINK(url, link-text)
• url: A standard universal resource locator. url is a string value that should contain a properly formatted universal resource locator string.
• link-text: An optional value that specifies the text that appears as a clickable link in the cell. link-text is a string value. If omitted, url is used as the link-text.
Examples
=HYPERLINK(“http://www.apple.com”, “Apple”) creates a link with the text Apple that opens the default web browser to the Apple homepage.
=HYPERLINK(“mailto:[email protected]?subject=Quote Request”, “Get Quote”) creates a link with the text Get Quote that opens the default email application and addresses a new message to [email protected] with the subject line Quote Request.
It's what is the closest feature available.
Yvan KOENIG (from FRANCE samedi 18 juillet 2009 10:30:29)

Does this support AVCHD files straight from the camera (Panasonic)??

Does the new final cut pro X support AVCHD files from the camera? I record with a Panasonic AG-HMC40.
Thank you

FCPX doesn't import AVCHD files from my Panasonic GH-2, even though importing works perfectly into iMovie. So just because camera X imports natively into iMovie, it isn't certain it will import natively into FCPX.
iMovie archives will always import because the AVCHD has already been converted to ProRes on import.
In FCPX the AVCHD files from say a GH-2 can be edited natively if you don't want to re-render into ProRes, but to date I can't import them to test this.
Chris.

ABAP Trial SR1 - Does this support WebDynPro?

Hi all,
I have installed the SR1 trial, Release 701, Level 3. I am trying to make my way through the [WDA Tutorial I - Getting Started with Web Dynpro for ABAP|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712] put can not preview my WebDynPro application. I recieve a 404 upon pressing the preview button: [screenshot.|http://yfrog.com/3vportalerrorj]
Can anyone advise?

Paul, yes this version supports WD for ABAP. All you need to solve you problem is to activate service which is processing WDs.
Go to TA SICF->navigate Default Host->SAP->bc->webdynpro->choose right click and select Activate. See screen shot:
http://2.bp.blogspot.com/_8rUoqRUS8iU/Sr4GCRmoabI/AAAAAAAAAms/rsWQdb3lHac/s1600-h/wd4a_sm30_02.JPG
taken from blog: http://sapport.blogspot.com/2009/09/runtime-analyses-of-webdynpro-for-abap.html
Hope this helps.
BR
m./

How does this support **** works?

Who can help?
thx

Carlo
Welcome
These forums are mainly User to User with only limited interaction by Adobe staff, you caan tell Adobe staff because they will have the logo and "staff" displayed where you have your logo and "member" status.
For diect discusssion with Adobe you need to start up an online chat or telephone the number given in your country, you will more than likely end up talking to someone in the call centre in India........a tip if you do this, if at first you cannot get the response that you seek, ring off and ring back so you speak to another
Prior to posting in the forum (and do post your question in the software specific area) do a search for previous questions on the same subject and do read the FAQ's that give guidance on the information to provide..............you would not believe the questions asked such as...................Premiere is not working.................how can we help on that.
Good luck

Does UTL_HTTP support calling document style web service??

Hi,
I am exploring UTL_HTTP options for one of the web service call requirement at a customer site.
Can any one tell if they have used UTL_HTTP for a document style service.
If so, pls share the code.
TIA,
-Bhawani

>
wscompile -keep -verbose -import -f:documentliteral
-f:nodatabinding config.xml
wscompile -cp . -keep -verbose -gen:server
serverconfig.xml
[creating model: test]
[creating service: Test]
[creating port: MyIntf]
[creating operation: callTXLife]
error: Type "javax.xml.soap.SOAPElement" implements
more than one interface, interfaces:
"javax.xml.soap.Node", "org.w3c
.dom.Element" ...
I have the same problem with J2EE 1.4 AS Developer Release.

Does this version of Firefox include web browsing at the "User Agent" category or higher?

I just downloaded Firefox 5.0.1. for Mac because I have to fill something out on a website that requires that I have Firefox 2.0.0.12 Mac with web browsing capability at the "User Agent" category or higher for Firefox.
Do I have that with what I just downloaded? Need to know ASAP.
Thanks!

Firefox 5.0.1 '''is''' higher than Firefox 2.0.0.12.
The '''UserAgent''' is a string of data which a web browser sends to each website to tell them which version of which web browser for user is using.
http://en.wikipedia.org/wiki/User_Agent

Does this program include virus and web protection?

I was about to install McAfee to my desktop and forgot I had put Firfox Home on my computer. Will these conflict? Am I already secure? I have Pop up blocker with Verizon Yahoo on the desktop. Please advise how to proceed with McAfee download or not. Thanks

Firefox is not an anti-virus program, you will still need to install an anti-virus program.
There is no need to pay for one, there are free alternatives available such as [http://www.avira.com/en/avira-free-antivirus Avira AntiVir Personal] and [http://www.microsoft.com/security_essentials/default.aspx Microsoft Security Essentials].

Does this support EAP? LEAP? PEAP? Web Authentication?

Similar Messages

Maybe you are looking for