Does this video work for everyone?

my client is telling me the video on the home page doesn't
work. it works fine for me. can everyone test it and tell me if its
not working for you? and if not, what computer, os, browser you are
using?
http://www.mrrogershood.com
thanks in advance,
brad

I don't know, but it works fine for me. I suspect changing
the keyframe was
important. But then I'm not a Flash expert. One thing you
might do is make
sure the client RELOADS the page so they're not seeing the
cached old page.
Also, the needs to be clicked twice, once to activate it, the
other to start
it. Maybe they're not doing that?
Just some thoughts.
MD
Brhaynes75 wrote:
> it works now????
>
> now im really confused. i did do a few things though. i
used to have
> the website in a "test" subdirectory, maybe the video
was forwarding
> to that. so i just left the
test/images/_videos/index.swf there just
> in case. i also opened up the flash file and tweaked a
few things.
> like, unlocking the layers and putting the opening stop
action on a
> keyframe instead of just a frame. i also changed the
parameters in
> the flash video to point to "/images/_videos/index.swf"
instead of
> "
http://www.mrrogershood.com/images/_videos/index.swf".
maybe one of
> those worked? but the client is still telling me it
doesn't work. =(

Similar Messages

  • Apple Mail specific domain domain \ username does this still work for Mavericks?

    THIS DISCUSSION IS ARCHIVED
    Where do I include Exchange domain in Mail setup?
    10212 Views 8 Replies Latest reply: Aug 18, 2010 2:37 PM by jruano  
    Level 1 (10 points) 
    mike_donahue 
    Jun 2, 2010 4:46 PM 
    Our company is running Exchange 2007, OWA enabled, EWS is setup, Auto discovery is enable. The only thing I haven't got an answer on is whether Service Pack 4 has been installed. The server is set up with a domain specified but I don't know where to include that in the Mail Account Setup. Mail seems to be locating the server fine but it says username or password can not be verified. I can only assume that it's because I haven't included the domain correctly.
    iPad (and I assume iPhone/iTouch) have a field in their setup to include the domain and a coworker is connecting fine with to the company server. Where is it in Mail? I have tried to prepend it to my username (domain/username) but it hasn't worked. I can't recall all the variations I have tried of this, but unless I have the domain first in the username field, Mail won't even connect to the server. I've been all over these boards and dozens more and I can't find any answers to this problem.
    Any here have any ideas? Thanks,
    Mike D 
    MacBook Pro, Intel Core 2 Duo 2.66 GHz, Mac OS X (10.6.3), 4 gig RAM
    I have this question too (0) 
    Categories: Mail and Address bookTags: mail_address_book_macosx_v10.6, mac_os_x_v.10.6
    Level 7 (22,080 points)
    Matthew Morgan Los Angeles, CA
    Re: Where do I include Exchange domain in Mail setup?Jun 2, 2010 5:48 PM (in response to mike_donahue) 
    Here's an article that may help.
    http://support.apple.com/kb/HT3748
    MattDual 1.8 GHz G5 2.5 GB RAM/MBP 2.26GHz 2GB RAM/iPod nano 4g/iPhone 3GS, Mac OS X (10.6.2), ATI Radeon 9600, Time Capsule, AirPort Express
    Like (0) 
    Level 1 (10 points)
    mike_donahue
    Re: Where do I include Exchange domain in Mail setup?Jun 2, 2010 9:01 PM (in response to Matthew Morgan) 
    I already read that one and it fails to address the domain question, but thank you for the suggestion.
    MikeMac OS X (10.6.3)
    Like (0) 
    Level 1 (10 points)
    mike_donahue
    Re: Where do I include Exchange domain in Mail setup?Jun 6, 2010 5:07 PM (in response to mike_donahue) 
    Bump.
    I still haven't found an answer to this. Anyone else have any ideas. Still waiting to hear back from out IT guys about the service pack issues.
    Is there any way to attach a screen grab to a post? Thought it might help paint the picture in case I haven't stated it clearly.
    Again, thanks in advance for any help with this.
    MikeMacBook Pro, Intel Core 2 Duo 2.66 GHz, Mac OS X (10.5.1), 4 gig RAM
    Like (0) 
    Level 1 (0 points)
    tf99
    Re: Where do I include Exchange domain in Mail setup?Jun 22, 2010 1:00 PM (in response to mike_donahue) 
    Hi. I'm having precisely the same problem. My Exchange account works like a charm on my iPhone, but all permutations of the same settings simply don't work in OS X Mail (v. 4.3).
    Has anyone out there set up an Exchange account with a domain? Can you tell us where you put it to get the account to work?
    Thanks!2.0 GHz MacBook, Mac OS X (10.6.4)
    Like (0) 
    Level 4 (2,535 points)
    Asatoran
    Re: Where do I include Exchange domain in Mail setup?Jun 22, 2010 1:16 PM (in response to mike_donahue) 
    Enter your username as:
    <domain>\<username>
    This is standard practice for Microsoft if there's no place to enter the domain name.
    (Note the backslash, not the forward slash. Backslash is NOT the one under the question mark on a U.S.A. English keyboard.)MBP 15" Penryn, Mini 2009, Mac OS X (10.6.2)
    Like (0) 
    Level 1 (0 points)
    tf99
    Re: Where do I include Exchange domain in Mail setup?Jun 22, 2010 1:42 PM (in response to Asatoran) 
    Thanks Asatoran. That turned out to be part of the solution for me. The other part was changing the port I used for the SSL connection -- it was set wrong at some point, either because the default was wrong, or because I forgot I had changed it in troubleshooting before trying the slash the way you suggest. Anyway, the port number for some reason doesn't show up on my iPhone settings, so it didn't occur to me to tweak it.2.0 GHz MacBook, Mac OS X (10.6.4), 4GB RAM
    Like (0) 
    Level 1 (0 points)
    frieiv
    Re: Where do I include Exchange domain in Mail setup?Jun 25, 2010 12:06 PM (in response to tf99) 
    Hi!
    Could you please state the port numer you changed from and to?
    I´m having the same problem and still can´t access the exchange server outside the company network.
    But it seems like Mail 4.3 tryes to use the internal server and never the external? Any tips on this?MacBook Pro, Mac OS X (10.6.4)
    Like (0) 
    Level 1 (0 points)
    jruano
    Re: Where do I include Exchange domain in Mail setup?Aug 18, 2010 2:37 PM (in response to mike_donahue) 
    <domain>\<username> worked for me... FINALLY!!
    Thanks muchMacBook Pro, Mac OS X (10.6.4), iMac

    Quit your mail entirely, then in terminal do:  
    mv ~/Library/Mail/V2/MailData/Envelope* ~/Desktop 
    This moves all your "Envelope Index*" files to your desktop.  An alternative is deleting the files, but this allows you to keep them as a temporary back-up (you can delete them at-will later).  Also, you can move the files from Finder instead of Terminal, if you prefer. 
    After the files have been moved, re-open Mail
    This should re-load all your email messages, updating/restoring the count
    While this works, it does not explain the reason the count goes missing, nor does it ensure that the count won't go missing again in the future, but at least it's a temporary workaround.

  • Problem: Why does this only work for powers of 2?

    I wrote this program to create a golf league schedule for, ideally, eight players. However I want it to be flexible enough to permit for other denominations, such as 10 or 12. When I run the program it works perfectly for any number that is a power of 2 (2,4,8,16,32,etc...) but it will not work for other even numbers such as 6,10, or 12. If anyone has any insights it would be most helpful.
    *(This is my first post on this forum so if anything looks not quite right or if this post isn't worded exactly how it should be then I apologize in advance)*
    Here's the three classes.
    public class ScheduleDriver
         public static void main(String[] args)
                              //instance variables
              int max;     //size of flight matches array
              ScheduleMaster master;//instance of class
              //get max number of players for flight
              System.out.print("Max number of players in this flight:");
              max = Keyboard.readInt();
              master = new ScheduleMaster(max);
              //create weekly schedules for season
              master.createSchedule();
              //display weekly schedules
              master.displayWeekly();
         }//end main
    }//end ScheduleDriver
    public class ScheduleMaster
         //instance variables
         int maxPlyrs;//maximum number of players in flight
         Week[] weeklySchedule;//array of weekly matches
         public ScheduleMaster(int plyrs)
              //set up instance data and declare array size
              maxPlyrs = plyrs;
              weeklySchedule = new Week[plyrs];
              //set up the size of each week's matches array
              for (int pos = 0; pos < plyrs; pos++)
                   weeklySchedule[pos] = new Week(plyrs);
              }//end for
         }//end constructor
         public void createSchedule()
              int count = 0;//index of weeklySchedule array
              final int QUIT = -1;     //quit value for loop
              int flag = 0;     //value to continue or exit loop
              //for each player A
              for (int a = 1; a < maxPlyrs; a++)
                   //for each opponent of player A
                   for (int b = (a + 1); b <=maxPlyrs;b++)
                        //set count/index and       reset flag to zero
                        count = (a - 1);
                        flag = 0;
                        //while still haven't found correct week for this match
                        while (flag != QUIT)
                             //if at least one of these players are already scheduled
                             //for a match this week
                             if (weeklySchedule[count].checkPlayers(a,b) == true)
                                  //if last valid index of array has been reached
                                  if (count == (maxPlyrs - 2))
                                       //reset count/index to zero
                                       count = 0;
                                  else
                                       //incriment count
                                       count++;
                             }//end if
                             else
                                  //assign this match to array of matches for week
                                  //and then exit loop
                                  weeklySchedule[count].setMatch(a,b);
                                  flag = -1;
                             }//end else
                        }//end while
                   }//end for
              }//end for
              //fill in last week/position night
              for (int pos = 0; pos < maxPlyrs;pos++)
                   //set up position match
                   weeklySchedule[maxPlyrs - 1].setMatch(pos + 1, pos + 2);
                   //incriment pos
                   pos++;
              }//end for
         }//end createSchedule
         public void displayWeekly()
              //for each week in schedule
              for (int pos = 0; pos < maxPlyrs;pos++)
                   //display header
                   System.out.print("WEEK " + (pos + 1));
                   //if pos/index is 0 or even, flight plays front 9
                   if ((pos % 2) == 0)
                        System.out.println(" [FRONT 9]");
                   //else flight plays back 9
                   else
                        System.out.println(" [BACK 9]");
                   //display lines
                   System.out.println("----------------");
                   //display week's matches
                   weeklySchedule[pos].display();
                   //skip a line
                   System.out.println("\n");
              }//end for
         }//end displayWeekly
    }//end ScheduleMaster
    public class Week
         int[] schedule;          //array of players involved in matches for week
         int max;               //max number of players
         int count = 0;          //number of players currently involved in matches
         public Week(int size)
              //set up instance data and size of array
              max = size;
              schedule = new int[size];
         }//end constructor
         public boolean checkPlayers(int playerA, int playerB)
              boolean flag = false;     //flag to determine if at least one of
                                            //the players to check are already playing
                                            //this week
              //for each element of array
              for (int pos = 0; pos < max; pos++)
                   //if player A matches player already playing this week
                   if (schedule[pos] == playerA)
                        flag = true;
              }//end for
              //for each element of array
              for (int pos = 0; pos < max; pos++)
                   //if player B matches player already playing this week
                   if (schedule[pos] == playerB)
                        flag = true;
              }//end for
              return flag;
         }//end checkPlayers
         public void setMatch(int playerA, int playerB)
              //if array can take more matches
              if (count <= (max - 2))
                   //insert players into array of active players for week
                   schedule[count] = playerA;
                   schedule[count + 1] = playerB;
                   //incriment count of players playing this week by 2
                   count = count + 2;
              }//end if
              else
                   System.out.print("No more matches can be entered!!!");
         }//end setMatch
         public void display()
              //for every even numbered index starting at zero
              for (int num = 0;num < max;num++)
                   //display the player at that position and the next consecutive
                   //player who will be his opponent for the week
                   System.out.println(schedule[num] + "VS" + schedule[num + 1] +
                   //incriment num
                   num++;
              }//end for
         }//end display
    }//end Week

    Ah, I have discovered the problem. The reason for the infinite loop was because of the resetting of the counter/index after every successful match entry back to (a - 1). This was causing matches to be put into weeks where they didn't belong, which caused the program to infinitely loop because it couldn't find an appropriate week to place it's next match. The only time the count should be reset back to zero is when a new player A is being processed or the last valid array index has been referenced before an out of bounds exception would be thrown. I'm still not entirely sure why this doesn't occur on powers of 2 but theh again I haven't put too much thought into it having solved the initial problem! :)
    Anyways thanks for the input all who posted, much appreciated.
    Happy programming!!!!

  • HT4777 Does this actually work for anyone?

    I have tried numerous things to get it so my AD users can use the webdav share part of file sharing with no luck. I can use local accounts all day long to access the webdav but if I try with an AD user I get a 503 error with something like WebDAV Nav + on iPad. Have the question posted in multiple places with no luck so far in getting it to work.

    Does your ISP/Mailserver support it?
    AK

  • Does this setup work for my network

    Hello all, here is my setup. I have a 1T USB drive connected to my imac. I use this for the imac backups. I would like to share that drive on the network to backup both my macbook pros. Is that possible or do i need to physically connect each macbook to the drive to run the backup.

    Yes, you should be able to do that, as long as the drive is large enough for all the backups (if not, connect another and back one of the Pros to it).
    See #22 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).

  • HT201322 Does this method work for the mini iPad ?

    Am trying to erase an app from the history of my iPad and it doesn't seem to work. What to do?

    If you are on iOS 6 on your iPad then you won't be able to hide it on it (you can't currently permanently delete items from your purchase history), but you should be able to do it on your computer's iTunes

  • Does this SW work for anyone, just purchased it and cannot export the pdf to anything

    Help

    Hi, Jimmy.
    Sorry for the issues you're having. Can you provide some more details so we can try to help you?
    Were you able to successfully log into the ExportPDF website?
    Were you able to successfully select and upload a PDF?
    Did you get an error message or did your export complete successfully and you got a Save button?
    Where exactly did the conversion process fail for you?
    Dave

  • Does this video work in your browser

    http://www.fishtec.co.uk/fishtecmovie.swf

    i see a white page.  i'm not sure if that's what i'm supposed to see.

  • I am having a hard time with a page that is working for everyone else. When I click on anything in the site I get a message that says "The page you were looking for doesn't exist."  This is happening on both my ipad 2 and my iphone 5. I cleared my cache

    When I click on anything in the site I get the message " The page you were looking for doesn't exist."  This website works for everyone else, but not on my iPad 2 or iPhone 5. I cleared my cache and history on the iPad, but it still isn't working.

    I live in Germany and my credit card is in my native country of Holland .. then it
    doesn't accept my credit card.
    Your first statement explains the second statement. To use the German iTunes Store, you need to prove that you're a resident of Germany (that is required by the content owners who will not allow cross-border sales) and the only way Apple can provide such a verification is by requiring that you enter in either a German credit card or a German-purchased iTunes prepaid card. Since I presume the former is not a possibility, you'll need to do the latter if you wish to purchase content from the iTunes Store. Again, this is not Apple's choice but is forced on them by the content owners as a requirement for Apple being allowed to sell the content. The EU is working on regulations that would force the content owners to allow access pan-EU, but that's still in the works.
    You do not need an iTunes Store account to activate and run your iPad, though; at least, I didn't need one for either of my two iPads. If you only want to set up an account so you can get free iPad apps, take a look here:
    http://support.apple.com/kb/HT2534
    Read the steps carefully as the order in which you follow them is apparently critical. This seems to come and go, or only apply to App Stores in specific countries, so you may not see the option for "None" when asked for a payment type.
    As to the German iTunes Store in English, you can comment to Apple on that via their feedback pages:
    http://www.apple.com/feedback
    Regards.
    P.S. Regarding "this is the only place for a complaint and that will no doubt get removed because
    I'm not full of happy joy sparkles.
    As stated in the terms of use to which we all agreed, this isn't a complaint forum, it's a technical support forum. You don't have to be full of "happy joy sparkles", but posts that are nothing but complaints may indeed be removed. If you want to complain to Apple, use the feedback pages.
    Message was edited by: Dave Sawyer

  • I just purchased the Apple MB974ZM/B World Travel Adapter Kit for my iphone 5. It says it works for the 4.  Does anyone know if this will work for my iphone 5?

    I just purchased the Apple MB974ZM/B World Travel Adapter Kit for my iphone 5. It says it works for the 4.  Does anyone know if this will work for my iphone 5?

    here is the link to Apples compatibility guide for it.
    http://store.apple.com/us/product/MB974ZM/B/apple-world-travel-adapter-kit

  • Does hdmi adapter work for ipad 1 ?

    does hdmi adapter work for ipad 1 ? having trouble streaming an app (Big ten network to go) onto my tv with video and sound, does hdmi adapter work for ipad 1 ? having trouble streaming an app (BTN2Go) onto my tv with video and sound

    jmyork wrote:
    does hdmi adapter work for ipad 1 ? having trouble streaming an app (Big ten network to go) onto my tv with video and sound, does hdmi adapter work for ipad 1 ? having trouble streaming an app (BTN2Go) onto my tv with video and sound
    It worked perfectly for me for a year until I replaced it with Apple TV.
    Having said that, I can't guarantee that it will work with every app.  Give it a shot and try it immediately.  If it doesn't work with the app(s) that are important to you, return it for a refund.
    By the way, I did find that the Apple TV does support every app that the cable did but no additional apps.  Although it does have other bennies, for this purpose it's an "electronic cable."

  • Audigy 2 ZS Distortion Issues With Vista - See if this solution works for you guys

    First of All Creative - It's sad, really sad that you really haven't supported your customers. As such a big maker of excellent products, I'm disappointed to know that you have barely provided driver support to your customers. I've been buying Creative products since 1997 - Also - I purposely upgraded my sound card on my Hp Media Center to an Audigy 2 ZS. Secondly - I formatted my computer and re-installed Vista. Before that, the sound card i.e. the sound worked fine (after a lot of trial and errors with different drivers, i somehow managed to get it working without Snap, Crackle and Pop Issues. In other words, I experienced distorted playback when I first installed Vista. Now that I re-installed Vista - Everything installed but as usual - only issue: Yup, you guessed it right.
    Creative Audigy 2 ZS Infamous Snap Crackle Pop (SCP) I did try k_daniels drivers and even though I applaud for his efforts - unfortunately it didn't work for me but i'm sure they would if you did the following - ) Uninstall all Creative Drivers Using Driver Sweep2) Do not install the driver through Windows Update (did not work for me)3) Install latest drivers from Creative or K_Daniel's Package4) Install Vista Codec Pack5) Install DirectX06) Then do the following: Got this sorted. Hope it works for everyone..found the answer searching Google.
    Right click VOLUME icon in taskbar
    Click PLAYBACK DEVICES
    Right click SPEAKERS
    Click PROPERTIESClick ADVANCED Make sure there's no tick marks in any of the options there including ENHANCEMENTS.
    This should sort it. [After doing all this, I have no sound issues whatsoever - Crystal Clear Audio Quality but still not better then XP] I am planning to try K_Daniels pack with all the extra applications and I'll post later on in regards to my experience with the pack. Good Luck P.S: Hope this helps somebody because doing all that helped me get back the audio clarity I was looking for without any distortion whatsoever.

    Hi xmins
    Im not using a decoder, only an amplifier alone with two speakers ... My cable is plugged in line out , and then plugged on line in of the amplifier.
    The distortion is very audible, in HL 2, Battlefield 2, etc
    When got a explosion, a shot from shotgun, missile, the sound comes distorted ...
    Any more hints?

  • I know I am a luddite but if I am streaming content on my Ipad from a TV station can I get it to appear on Apple TV or does it only work for things in my itunes library?

    I know I am a luddite but if I am streaming content on my Ipad from a TV station can I get it to appear on Apple TV or does it only work for things in my itunes library?

    Welcome to the Apple Community.
    Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).
    I have created a User Tip to list Apps that have been tested with Video Airplay, if you have any Apps that you have tested please leave details in the comments at the bottom of the User Tip or email me if you don't have commenting privileges.

  • Will this Ram work for S10

    Does anyone know if this would work for the S10?
    http://bensbargains.net/deal/91668/ 
    It's made by Super Talent, San Jose, CA.  Thanks!
    Message Edited by eracer on 01-28-2009 02:56 PM
    Solved!
    Go to Solution.

    ok, that's better.   while non-ECC memory supposedly works in the S10, i believe it's set up to normally accept ECC memory.   also keep in mind that if combining memory, you can't use non-ECC with ECC as the S10 won't boot past POST.
    part of the benefits of having a proper workstation is error checking.   in my opinion ECC memory is the best way to go, even if non-ECC memory works.
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • I am using InDesign CC and added Garamond premier pro font. This has worked for months, now suddenly my entire book is  highlighted in pink and my font is missing! I get the message that the font is currently unavailable on my computer, how can i get it b

    I am using InDesign CC and added Garamond premier pro font. This has worked for months, now suddenly my entire book is  highlighted in pink and my font is missing! I get the message that the font is currently unavailable on my computer, how can i get it back?

    BlazingRiver wrote:
    So my computer is running on OSX but my question is if any of the viruses on my windows partition can still run and communicate information to their 'master' as there is still a supply of electricity? Sorry if its obvious.
    Here's a positive thing: Windows viruses can't run on OS X, but they can be transferred from OS X to other PCs (only if you have them on the OS X volume).
    BlazingRiver wrote:
    1. How could a trusted source e.g. Google and Steam contain viruses if they are downloaded from the original source? and
    You could get a virus from a different source that infected Steam and Chrome without any problem. Viruses normally try to infect as many files and programmes as possible.
    BlazingRiver wrote:
    2. Can iOS devices get viruses and I know this is probably in the wrong but 3. What anti-virus scanner and remover tool do you recommend for windows. The only one I am familiar with is Kaspersky?
    iPhones, iPads and iPods touch can't get viruses but they can transfer them to other PCs. For Windows, I recommend Microsoft Security Essentials

Maybe you are looking for