Does Time Machine Continue backing up when I close the lid on my MacBook?

Probably a dim question but do I need to leave my MacBook with the lid/screen open for back up to continue? My Time Capsule is accessed by wireless. OS 10.6.8
Thanks

OK I see this has been answered already.

Similar Messages

  • Why does itunes and other media continue to play when i close the lid on my macbook pro 2011???

    Hey, I am new to mac and still getting used to it (making the transition from windows), its amazing! Anyhow, I cannot figure out why my itunes and other media like youtube or a film on vlc player continues to play once the lid has been closed. I thought that when i close the lid the macbook should then sleep. It does everytime when there is nothing playing. The little white light on the bottom right hand corner of the book is on but music continues to play.
    The sleep option always works. If I press the power button and choose the option sleep it does so etcc.
    Is this normal and am I just being stupid or is there a problem??
    I bought the laptop from ebay, its a macbook pro late 2011 17inch. I dont have apple support and might have to make a trip into London to the mac store however I was hoping someone can help me...    
    Processor  2.4 GHz Intel Core i7
    Memory  4 GB 1333 MHz DDR3
    Graphics  Intel HD Graphics 3000 384 MB
    Software  Mac OS X Lion 10.7.5 (11G63)
    Thanks if you can it is muc appreciated....!!

    hey, thanks for the reply. I don't know to be perfectly honest. When I close the lid without any music playing it sleeps fine. How could I check?
    So basically I pressed the power button and pressed sleep. The laptop turned off and the little white light turned on no problem. I did the same thing with closing the lid and it went to sleep no problem. (Can you confirm that when the little white light is on it means the laptop is sleeping)??.
    I then had itunes playing and pressed the power button and when i pressed sleep the music paused then 6 seconds later it went to sleep. I then had itunes playing and closed the lid and the music kept on playing even though the white light was on.
    What do you think  jessejarvi?

  • Does Time Machine make back-ups when nobody is logged on?

    Hello,
    Does Time Machine make back-ups when nobody is logged on and does it continue to back-up when I log off?
    I'm using an directly connected external hard drive to back-up my data with Time Machine, the back-ups are encrypted.
    Thanks in advance.

    I had the same problem with Time Machine and solved it by enabling "Enable Power Nap" in Energy Saver:
    System Preferences...
    Energy Saver
    Restore Defaults
    Check "Enable Power Nap: While sleeping, your Mac can back up using Time Machine and periodically check for new email, calendar, and other iCloud updates."
    2013 21.5 iMac
    OSX Mavericks
    Seagate 1 TB slim USB 3.0 (power is drawn from USB port), formatted to Mac Journaling File System

  • HT5219 When I close the lid on my MacBook Pro the print on the thunderbolt display gets very small & hard to read. How do I prevent this?

    When I close the lid on my MacBook Pro the print on thunderbolt screen is very small & hard to read. If i keep the lid open on the MacBook Pro the print is big and easy to read. How do I prevent this from happening?

    Hi JanStran,
    You may need to check your Display settings and/or resolution.
    The article below explains how to used Clamshell mode "closed display" on your Macbook Pro, versus "mirroring."
    Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
    Hope this information helps ...
    - Judy

  • Why does my laptop turn itself off when i close the lid?

    i have a HP pavillion dv4 notebook. sometimes when i close the lid and let it go to sleep, and then come back to use it, the computer is off. i get a weird DOS-like black screen with white text when it comes back on asking me if i want to start windows as normal or something like this. has anyone encountered this? does anyone know how to fix it?

    Try resetting the iPod.  Nothing will be lost.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    You can also try another cable and usb port.

  • When I close the lid to my Macbook Pro, it won't stay awake.

    I am trying to hook up a SAMSUNG SyncMaster B2330 monitor to my MacBook Pro so that I can close the lid and work with my wireless mouse and keyboard instead of the laptop screen.  I have limited desk space and I dont have room to have two monitors open. 
    When I close the lid and wiggle the mouse, my computer wakes up for a second, but then quickly goes back to sleep. I am not currently plugged into power, but I am running on battery.
    Becky

    Connect the power cord and hit the space bar on the keyboard.
    Apple Portables: How to use your computer in closed clamshell (display closed) mode with an external display

  • Won't go to sleep when I close the lid

    When I close the lid of my Macbook Pro (running Lion) it doesn't realy go to sleep.  When I open the lid the screen goes black.  Does anyone know what the issue is?
    Thanks

    if you're sayingt he light doesn't blink anymore, that's new to lion.
    if you are really having issues that you think are a bug instead of how it should work, try resetting your SMC as this should solve any issues with putting your computer to sleep with the lid.
    http://support.apple.com/kb/ht3964
    Resetting the System Management Controller (SMC)
    Resetting the SMC on Mac portables with a battery you can remove
    Note: Learn about removing the battery on MacBook and MacBook Pro.
    Shut down the computer.
    Disconnect the MagSafe power adapter from the computer, if it's connected.
    Remove the battery.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Reconnect the battery and MagSafe power adapter.
    Press the power button to turn on the computer.
    Resetting the SMC on portables with a battery you should not remove on your ownNote: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • Installed new harddrive and I am trying to restore from time machine external back up. I restarted the computer and held the Command key and the R and the restore utility does not appear. what can I do

    I installed new hard drive and I am trying to restore from time machine external back up. I restarted the computer and held the Command key and the R and the restore utility does not appear. what can I do

    Command + R keys are for Macbooks running Lion and Mountian Lion only. ( i could be wrong on this)
    you have a couple of options:
    Do a clean install of Snow Leopard via Install DVD.
    Clone your old hard drive to your new hard drive via Carbon Copy Cloner
    Or click on the link below to give you a better idea.
    Hope you get it sorted out.
    http://pondini.org/TM/14.html

  • Can somebody tell me please: does Time Machine automatically back up iPhoto?

    Can somebody tell me please: does Time Machine automatically back up iPhoto?

    Unless you have excluded it, it will backup the iPhoto Library.
    Ciao.

  • How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

  • Why does my macbook pro keep shutting down by itself when I close the lid?

    My macbook pro is shutting itsself down when I close the lid. Does anyone know why this is happening?

    Solution may be found if you search in the "More Like This" section over in the right column. 

  • Does not sleep when I close the lid...

    Never encountered this before! I have 1 MacBook that works fine, but bought another today that will not sleep when I close the lid. It does sleep when I select it from the menu, but not when I shut it.
    Any ideas?

    Mine recently started doing the same thing. Now everytime I want to go out with my computer I have to pack up the charger, even if I only end up using it for 15 minutes, because the battery is wasted by 2.5 hours.

  • Why does my iTunes stop playing when I close the lid on my laptop?

    I am playing iTunes on my Vista laptop and my setting are 'do nothing' for both powered and battery use, but when I close the lid iTunes stops playing music. Does anyone know why and how I stop it? Please don't say "don't close the lid..." Thanks.

    You have your answer... there is no way to stop iTunes from stopping playing music when the lid is closed.
    You can try adjusting the power settings, but if that's not working...there is no way for iTunes to override it.

  • Takes too long to hibernate when I close the lid - Also random device noise when it boots up

    Hello guys.
    Ever since i've wiped the machine, i've been having these two problems. When I close the lid, it used to go to sleep straight away, but now I can see the sleep light (and the power button) flash and flash, then it goes to sleep.
    When waking up it goes through the lenovo startup screen and resuming windows, then it asks for a password, before I used to open the lid and it would ask me for the password straight away. I know it was going to sleep because I could hear the beep straight away when I closed and opened it, but now it just takes too long.
    Also, everytime I boot up into windows or resume into windows from a sleep state, I can hear the device noise, like something is being plugged in/out. But there is nothing being plugged in or out at the time. I can't get to device manager quick enough to see what it is that is causing it. 
    But all drivers seem okay.
    Thanks in advance.
    Sam.
    EDIT: Also noticed, when the lid is closed, randomly the laptop turns off (hear the beep) an then turns back off again.
    Weird.
     T420 model number: 4180-PR1 with OS: Windows 7 Pro 64 bit
    T420 4180-PR1 - OS: Windows 7 Pro 64 bit
    Solved!
    Go to Solution.

    Hi Sam,
    is this to do with the T420 model number: 4180-PR1 with OS: Windows 7 64 bit installed on it as in another thread you posted in?
    Maybe you could pop the information into your signature; members like to know which system and OS are involved.  At the top next to Sign Out choose   My Settings > Personal Profile > Personal Information - Signature
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • My Macbook Air wouldn't go to sleep when I close the lid. I have tried to reset the SMC, but it didn't solve the problem.

    Normaly it goes to sleep, when I close the Lid, but suddently this function stopped. That means that Mac'en still is running and become warm, during transport.
    (Macbook Air 13 ", medio 2011, 1,7 core i5, 4 MB ram, 256 GB, iMac 22", Timecapsule 1 TB, Airport Express, 2 Iphone 4, 1 iPhone 3s, iPad2)

    Test after each of the following steps that you haven’t already tried:
    Step 1
     ▹ System Preferences ▹ Print & Scan ▹ Open Print Queue...
    Check all printers for unfinished jobs. Deal with any you find.
    Step 2
     ▹ System Preferences ▹ Energy Saver ▹ Power Adapter ▹ Wake for network access: uncheck. You may need to unlock the preference pane by clicking the lock icon in the lower left corner and entering your administrator password.
    Step 3
     ▹ System Preferences ▹ Energy Saver ▹ Schedule… ▹ Start up or wake: uncheck
    Step 4
    Disconnect all wired peripherals except keyboard, mouse or trackball, and monitor, if applicable.
    Step 5
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
    Select All Processes from the menu in the toolbar of the Activity Monitor window, if not already selected. Enter “powerd” (without the quotes) in the "Filter" text field. Select the powerd process and click the Quit Process button in the toobar (stop-sign icon.) In the sheet that opens, click Force Quit. You’ll be prompted for your administrator password. The process will be relaunched immediately.
    Step 6
    Boot in safe mode and log in. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the Mac OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
    If sleep now works as expected, go on to the next step.
    Step 7
    Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
    Step 8
    If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
    If you still have the sleep issue after booting out of safe mode, post again.

Maybe you are looking for