Does track end jump trump chapter or story end jump?

I have a DVD with 1 menu & 3 tracks. Tracks 1 & 2 each contain l short video (different audio or video formats) and track 3 contains 3 short videos which I have broken into 1 story w/3 chapters. On track 1, there is 1 chapter marker and I have set its end jump back to the menu. The end jump for the track itself is set to Track 2. Button 1 connection is set to the chapter marker. Ditto for track 2 except its end jump is set to track 3 while its one chapter marker end jump is set to menu 1. Button 2 is targeted to track 2, chapter 1. Track 3 has 3 chapters. It's end jump is set to menu 1. The chapters within the story are also set to menu 1 and it works the way I want it to. Button 6 is a PLAY ALL button targeted to track 1. When I select button 1, the video ends and continues on to track 2 instead of going back to menu 1;. When I select button 2, it also contiunues on (to track 3) instead of jumping back to menu 1. My goal was to be able to access each individual video and then jump back to the main menu. I tried adding stories to each of Track 1 & 2 and making the story end jump go back to he main menu but it seems the track end jump trumps both chapter & story end jumps. Anybody have any solutions to my problem? thanks.
Steve

Hi:
You can do it using a script. Take the DVDSP User Manual and look for the topic Jumping to a Menu's Loop Point (Chapter 14 - Creating Scripts) and you'll find a detailed description of how to do it.
DVDSP User Manual download page
Hope it helps!
(1191)
Alberto

Similar Messages

Track ends early and follows story end

I have 2 very similar tracks (slightly different versions of same video) with identical chapter markers. One plays all the way through just fine. The other plays through several chapters but when it gets to the end of one chapter it follows the end jump of that chapter's story, preventing the viewer from watching the entire video when that was what they selected.
What could be causing this?
I created chapter markers in FCP. Is it a problem with the next chapter marker? Is there some setting I'm ignorant of (this is my first DVDSP project with chapters)?

What's the difference between a story end jump and a story marker end jump?
The story end jump is where the story when completed in full goes to. The story marker end jump is where the story will jump to when the next marker after that marker with the end jump is reached. (Note that I have not played with controls this way in awhile, I use the way below. There may be some tricks to control navigation with the settings that I do not recall right now.)
Practically, at least for me, the easiest way is just make seperate stories and do not set Story Marker Jumps (though set the Menu commands) and if there is another combination of markers wanted, just make another story.
Assume I should set the story end jump to go back to my chapter menu but the story marker end jump in that one chapter being set was what cause the track to end at the end of that chapter?
Sounds like that is the issue, if you had the story marker end jump and it jumped when it hit the next marker

I loose both sound tracks of the last chapter when burning a movie to a disc in iDVD

I loose both sound tracks in the last chapter when I burn a project to a disc in iDVD. The sound tracks are there if I play the movie in iDVD before burning to disc, but as soon as I try turn burn to disc the original sound track & the sound track imported from iTunes disappears in the majority of the last chapter.
I'am using the latest version of iMovie & IDVD. The project in iDVD is listed as 96 minutes & 3.9GB & I'am using an LG single sided DVD 120 Min 4.7GB
Any help will be appreciated.
Mike (Australia)

Hi
May be something here.
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
Minuscular - - 176x144
Mobile - - - - - 480x360
Medium - - - - 640x480
Large - - - - - - 720x540 960x540
HD - - - - - - - - 1280x720
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

Why do my tracks keep jumping to +6.0db?

I'm using Native Instruments plug-ins. (Battery 3 and Electrik Piano) and the tracks in Logic keep jumping to +6.0 db on the mixer for some reason.
I haven't set track automation. And when I DO set track automation to keep it nice and low, it still jumps up and gets loud.
This isn't happening to my Audio tracks. Does anyone have any idea why these MIDI tracks keep jumping up in volume?
Thanks,

and the tracks in Logic keep jumping to +6.0 db on the mixer for some reason.
Cause you are talking about "tracks", so searching specific CC7 using the Event List is time consuming and a pain if need to process multiple tracks. I can offer a "Track Batch Deletion" tip, so you can do that very fast.
1. Select the tracks in "Question" in the Arrange as shown in the pic below.
2.Open the Transform Window and create new template as shown - i.e Condition Status = Control, and Data Byte 1=7. Note ! Set the Top Right Mode to "Delete Selected Events" and hit "Select & Operate" button below to batch delete all CC7 events in the Arrange selected tracks.
Note: though you have selected the Arrange tracks previously, the "Select & Operate" Transform operation select internally the target events in the regions. You can import that Transformer Template from song to song or keep it in your Starting Template - if any!
A.G
======================================
www.audiogrocery.com
Author of: Logic GUI Deluxe(Free), Vox De Bulgaria s.a.g.e vocal pack for RMX, Logic Snapshot Console, RMX Power CTRL - Logic Environment Midi editor for Stylus etc.
======================================

When a track ends, how do I get it to go back to a menu?

Hey all,
When a track ends how do I set it so the dvd returns to a menu?

Hey darkscion
I guess the reason people bother to point out things like forum etiquette is to help you in future. If you were to go on using this forum to ask the most basic of questions, people are going to get pretty fed up with you and then, just maybe, when you have a question that you just can't find the answer to in the book, people might not be bothered to even read your question. The boy who cried wolf. So getting snotty about the tone of voice that they used is pretty bad form. Be gratefull, learn and then this forum will be a wealth of information when you really need it. I've been using this forum since DVDSP 1.5, and have only needed to post questions myself a handful of times as almost always my question has been answered before or is in the book. As I have read here frequently, Search is your friend.
Kristjan
ps. heres the link to the manual answering your question
http://documentation.apple.com/en/dvdstudiopro/usermanual/index.html#chapter=17% 26section=8
Message was edited by: kristjan

Execution does not end even after all records updated..

Hi,
I have plsql code like :
declare
begin
for x in ( select .......) loop -- about 4000 times
for y in ( select ............) loop -- about 50 times
end loop;
-- some code goes here to manipulate clob data
-- like creating free temp clobs - use - then free them
-- Update statement that update some table using clob values.
insert into tablex values(sysdate);
commit;
end loop;
end;
Here I can monitor from other window howmany records are inserted into tablex and howmany updated in update statement by...
select count(1) from tablex;
After 50 mins i can see that all records are updated but...
plsql code does not end its execution it continues even after all records are updated..untill i have to kill the session or let be run for long time.. :(
I can not understand why this it is not ending execution..
What could be the problem ...

Hi,
Here it is.....
declare
v_text_data TableA.text_data%type;
v_clob clob;
type dummyclob_t is table of clob index by binary_integer;
dummyclob dummyclob_t;
v_str varchar2(255) := 'ddfsajfdkeiueimnrmrrttrtr;trtkltwjkltjiu4i5u43iou43i5u4io54urnmlqwmreqwnrewmnrewmreqwnm,rewqnrewqrewqljlkj';
begin
select data bulk collect into dummyclob from sfdl_clob; -- five rows containing clob data upto 1MB
for x in (select object_id
from TableA
where object_type = 'STDTEXT' ) loop
dbms_lob.createtemporary(v_text_data,TRUE);
for y in (select '<IMG "MFI_7579(@CONTROL=' || ref_id || ',REF_ID=' || ref_id || ').@UDV">' temp_data
from TableB
where object_id = x.object_id) loop
v_text_data := v_text_data ||
case
when trunc(dbms_random.value(0,7)) = 0
then chr(10)
else v_str
end ||
y.temp_data;
end loop;
select text_data into v_clob from TableA where object_id = x.object_id for update;
if v_text_data is not null then
dbms_lob.append(v_clob,v_text_data);
end if;
dbms_lob.append(v_clob,dummyclob(trunc(dbms_random.value(1, 6))));
dbms_lob.freetemporary(v_text_data);
insert into xyz values (sysdate);
commit;
end loop;
end;
Thanks for your time..:)
Rushang.

How to remove records in itab where its HKONT does not end in '0'...

Hello Experts,
I am getting records from BSIS and BSAS and I want to remove those records with
their HKONT(GL account) does not end in '0'(zero). I do now want to do it via a loop.
I tried using DELETE FROM ITAB statement but it seems it does not work.
Here is what I did:
IF NOT gt_bsis_bsas[] IS INITIAL.
DELETE gt_bsis_bsas WHERE hkont+10(0) <> '0'.
ENDIF.
Hope you can help me guys. Thank you and take care!

Hi Viray,
'+' is a wildcard char which is used to represent one char
where as '*' represents any number of char's.
In this case +++++++++0
<b>means that the length of the field is 10 chars and first 9 can be anything</b>
he didn't use '*0' since it could mean that the length of the data entered can be anything .
Hope this clarifies
Regards
Nishant

When burning a completed movie in idvd the whole sound track of the last chapter disappears

When burning a completed movie in idvd the whole sound track of the last chapter disappears. When I play the whole movie in iDVD before burning to disc both the sound tracks are their, but when burnt to a DVD the two sound tracks disappear half way through the last chapter, can any one help please.

Mike,
There is an iMovie forum, please click the link and repost your question. I suspect the iMovie guru's may be able to help you out.

Excel process does not end properly

Hello All.
I am using excel in my program writing data into it an excel workbook and then later on reading data from it. I have written down the code of closing excel worlkbook and shutting down excel application hence releasing the handles for it. But when i do that i.e. when the code containing excel workbook closing and excel application shutting down executes, excel workbook is closed but excel process does not end properly and can be seen in the task manager. And when i repeatedly open the excel file through my front end interface and close the file, another excel process is added in the task manager which does not end and so on. What can be the problem and solution. Thanks in advance.
Best Regards.
Moshi.

Interfacing to Excel via ActiveX may be tricky, ending in situations like the one you are facing now.
The basic principle is that every single handle opened to an Excel object (workbook, worksheet, range, variant and so on) must be closed properly for the entire process to terminate gracefully. If a reference remains unhandled at program end you will find an instance of Excel remaining in the task list and you may suffer erratic behaviour in subsequent accesses to the product.
You must double check all references and add approporiate dispose/close commands for every one of them.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Process does not end when binding a object to registry

I am writing a Unit Test case in which i need to create a datasource and bind it to RMI registry so that the methods i need to test can get a database connection . The problem is that after the test cases have finished running the process does not end and i have to shut it down manually . When i do not bind the datasource , the process ends put with errors because the methods do not get a connection. Even unbinding it after running the test cases does not help.
Edited by: gurpreetbhalla on Jun 25, 2009 11:56 AM

public void testIntraDayForClient() throws Exception
          ConstantConfig.JNDI_FACTORY = "com.sun.jndi.rmi.registry.RegistryContextFactory";
          Hashtable env = new Hashtable();
          env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.rmi.registry.RegistryContextFactory");
          env.put(Context.PROVIDER_URL, "rmi:");
InitialContext ic = new InitialContext(env);
// Construct DataSource
SQLServerConnectionPoolDataSource ds = new SQLServerConnectionPoolDataSource();
ds.setURL("jdbc:sqlserver://10.200.41.201:1433;databaseName=TradeportTC");
ds.setUser("sa");
ds.setPassword("superuser");
DataSource d = ds;
     ic.unbind("TCDB_JNDI");
ic.bind("TCDB_JNDI", ds);
          HttpServletRequest req = new MockHttpRequest();
          HttpServletResponse resp = EasyMock.createMock(HttpServletResponse.class);
          ActionContext context = EasyMock.createMock(ActionContext.class);
          HttpSession session = EasyMock.createMock(HttpSession.class);
          EasyMock.expect(session.getAttribute("ZephyrUserName")).andReturn("sclient90");
          EasyMock.expect(session.getAttribute("ZephyrDomainId")).andReturn("8a48a9cb1860e2a4011860e2c64d003a");
          EasyMock.expect(session.getAttribute("isTrader")).andReturn(false);
          EasyMock.expect(session.getAttribute("accountsDataDB")).andReturn(null);
          EasyMock.expect(context.getSession()).andReturn(session).times(12);
          session.setAttribute("vawTrades", null);
          session.setAttribute("noOfDays", null);
          session.setAttribute("accountNo", null);
          session.setAttribute("exchange", null);
          session.setAttribute("symbolName", null);
          session.setAttribute("trCode", null);
          session.setAttribute("status", null);
          session.setAttribute("accountsDataDB", null);
          EasyMock.replay(session);
          EasyMock.replay(context);
          MyOrdersAction action = new MyOrdersAction();
          action.execute(req, resp, context);
This is the unit test case which does not exit , if i skip this binding ic.bind("TCDB_JNDI", ds);
then it exits normally with a failure,

Ipod stops after each track ends in a playlist?

I have a problem: Suddenly, my ipod stops after each track ends in a playlist. This happens with every playlist and every track, all of which worked fine until this week. All tracks' settings are "yes" on 1) part of a compilation; 2) remember playback position and; 3) skip when shuffling. I have not updated any software or added any new content to my ipod. I imagine that some setting has been switched on or off, but I am unable to identify which one. Please help as these are my audio books! Thanks!
nano 6th gen

Yilofall wrote:
I have an iPod Classic (I am fairly new to the medium) and when playing music the Pod goes smoothly from one song to the next but, when listening to a book (brought in from a CD copied into iTunes) it plays one track and stops.
See below for a link on how to copy a CD into iTunes if you want an Audibook.
I have tried checking the gap less album box (what is that for by the way) but it makes no difference.
If you've heard of Dark Side of The Moon by Pink Floyd then it's used there when you want no break between tracks. Or any DJ mixed continuos play CD. Or some classical music. Take your pick
Third question, can I make a book copied into iTunes an Audiobook? How?
[How to Import Audio CD audiobooks into iTunes|http://aldoblog.com/audiobooks/itunes/importing-audio-cds>
Thank you!
No problem, hang around and read a few posts, there's always plenty to learn in here.
Regards,
Colin R.

MPEG4 Movie audio does not end up on burned DVD

When I create a DVD in iMovie, the audio for the MP4 movies does no end up on the DVD. However it is audible in iMovie prior to creating the DVD. The movies were created with a sony camera mpeg4 format. I do not understand why they play in iMovie but not on the burned DVD?? Help.

When in iDVD, use the Delete Encoded Assetts in the Advanced menu. This often clears up any garbage left laying around.
Also my standard list of things to do first for these weird sort of problems, but I also tend to run these before I go to burn an iDVD project just to be safe. Keep in mind this list represents the programs I tend to use. I am running Panther (10.3.9) so Tiger users might want to check the below list for compatibility. There are several alternate programs that do the same things with some combining the functions of some of the ones below. So everyone has their favorites, but here are mine...
Run MacJanitor (free download) to do all the Unix Cron Maintenance scripts.
Run Disk Utility (Applications -> Utilities) and repair disk permissions on your start up drive (typically your internal drive). Also verify any other drives mounted on the system, especially any external drives that you use for iMovie and iDVD projects.
Run Preferential Treatment (free download) to check for corrupt/damaged application and system preference files.
Run Cache Out X (free download) to clear all system and application caches.
Reboot your Mac (after running Cache Out X you are given the option to restart the machine).
If you still can not get it to run correctly, next thing to try is to throw out the iDVD preference file (don't forget to change back those preferences you want different from the defaults next time you run it).
Patrick

LMS 4.2.4 User Tracking End Host Report The system cannot find the path specified

Hello at all,
I have a problem when creating a scheduled User Tracking End Host Report.
I always get the message "The system cannot find the path specified" and the job fails.
An immediate report is successful.
I tried to change the "Report Publish Path" from "C:/Program Files (x86)/CSCOpx/" to "C:/PROGRA~2/CSCOpx/", but that did'nt worked.
Has anybody an idea?
Regards, Kerstin

Share the screenshot of the following directory :
NMSROOT\CSCOpx\campus\etc\cwsi
In case it is blank, try following :
1.Stop the services : net stop crmdmgtd
2.Take a copy of > C:/Progra~2/campus/etc/users and place it under C:/Progra~2/campus/etc/cwsi
3.Start the services : net start crmdmgtd
Please try and let me know the updates.
-Thanks
Vinod
**Encourage Contributors. RATE them.**

SM04 Session does not end.

Hi all,
I noted that SAP R/3 session does not automatically ended after a user logs off from the ESS Frontend. This will result in a increase in session in SM04 eventhough the users had logout from the portal.
I have adjusted some timeout parameter in transaction RZ10 in R/3 including rdisp/plugin_auto_logout and restarted the services. To test, i accessed the ESS Portal and access some IAC IVIEW. Thereafter, i logged off the portal and observed the session created in R/3 (SM04) and noted that the session including the RFC connections are not released at all.
Anyone face this issue before? How can i control so that after the user logoff from the portal, the session in SM04 is end.
Thanks in advance

Hi Sean,
I found some note on the session which i attached below. However in my EP server have dozens of web.xml. Which one should i configure? Would you able to help me on this? Some of my IAC view does not end while some do. Any idea on that?
Specifying HTTP Session Timeout
Use
You can specify a timeout period for HTTP sessions created in your Web application. If the session is inactive for this timeout period, it is invalidated by the Web container.
If you do not specify such a timeout explicitly, a default one of 30 minutes is assumed.
You can configure the HTTP session timeout using the web.xml descriptor.
Procedure
On the web.xml screen, proceed as follows:
1. Open the General screen.
2. To specify the timeout period, enter a value in the Session configuration Session timeout field.
The value is specified in minutes. If you enter a negative value in this field, HTTP sessions are never terminated because of a timeout. Instead, only an explicit logout by the user will terminate the corresponding session.

Firefox sometimes does not end

14.7.2014
Firefox 30.0 (German version) under Win 8.1
Hello,
Sometimes Firefox does not end properly. When Firefox is re-started I get a message saying Firefox
is still running although about 10 minutes has passed between end and the re-start.
Only by killing Firefox in the Task Manager can cure this problem. I use firefox a lot and this occurs about 5 times a day.

Firefox Keep running in background, that's why your getting this error
*http://kb.mozillazine.org/Firefox.exe_always_open
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Does track end jump trump chapter or story end jump?

Similar Messages

Maybe you are looking for