Does travel to Austraila require a converter to charge iphone 3GS

I am traveling to Australia, from the US, in a few weeks and was wondering if I needed to purchase a power converter to charge my iPhone 3GS or if I would be able to just use an adapter for that country?

The USB charger is universal, 100-240 V, 50-60 Hz. All you need is a plug adapter.
You can read it on the charger if you have a magnifying glass.

Similar Messages

  • Does the I-phone require a converter when charging overseas?

    Looking to determine whether I'll only need an adaptor for charging my I-phone 3G-S versus a converter while I'm in Turkey.

    Your charger is a world charger, works everywhere. All you need is the proper plug adaptor, that's it.

  • HT201328 Does anyone know how to go about unlocking an iphone 3GS from Orange. Orange have told me I have to get it done through apple but on here only thing I can find says I need to ask the carrier???

    Does anyone know how to go about getting an iphoe 3gs unlocked??? Orange say i need to get Apple to do it but on here the only thing I can find says i need to get the carrier to do it????? need help

    Whoever you talked to at Orange was completely wrong. Only Orange can unlock the iPhone.
    http://support.apple.com/kb/HT5014
    You'll need to contact Orange again and try to get someone who knows what they're talking about.
    Regards.

  • Is Voltage Converter Necessary when charging iPhone 3GS in Amsterdam

    I posted this question before and was told that all I needed to charge my iPhone in The Netherlands was a 2 prong plug converter (round pins) to convert my current plug to theirs. Apple sells a set for lots of countries, but I already have one for Netherlands. Discussions here said, just use the plug converter. Then I called Apple and they me that I also need to use a voltage converter in addition to the plug converter. I know USA voltage is 120 and Netherlands in 220 or 230. Will my phone burn out without a voltage converter? Apple says it might, yet they don't sell the voltage converters to go with the plugs they sell. They suggest Radio Shack, etc. What voltages will my iPhone handle? I don't want to buy another piece to carry over there if not needed. I keep getting different answers, even from Apple techs. Who knows for sure? Thanks for help.

    look on the actual adapter itself and in very hard to read writing it will say the voltage range inputs of the charger.
    Its not about what we say, its about what it says on your device. Our Euro/UK ones got from 1110 to 230 but thats means nothing as yours are whatever they say on the charger.
    Buy a Euro standard charger at the airport on the arrivals side - probably only $10.

  • HT5567 Does 6.0.1 work well on an old iphone 3gs?

    If not is there any way to load a a lesser version like 5.x? currently I have 4.2.1 and many apps do not work with it now.

    6.0.1 works, and there is no way to get any other version.

  • TS1401 by doing this changes iam still unable to connect my iphone 3gs to pc...?

    hello,
          sir,
    i am unable to connect my iphone 3gs to pc when iam connecting it to pc it shows the message tht usb is not recognised............. i tried it to connect via bluetooth but it also failed.. plz help iam unable to connect it to pc nd itunes

    Hi vamsi sai,
    I understand that you are having issues connecting your iPhone 3GS to your PC. When troubleshooting these issues, I find that the following resource usually provides a solution:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • Does anyone know how to remove software from an iphone 3gs

    hi

    Is the phone turning off or just the screen?  The screen should turn off when you place the phone next to your ear.  It should turn back on when removed.
    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • HT6146 Doed this update also address the GPS issues on iPhone 3GS?

    With IOS6.X (and all other 3GS users) I lost the FULL GPS function I had when I purchased my iPhone 3GS (I assume its behaviour is like an iPod touch now), I was wondering if Apple have included a fix with this update?

    I had two users that were unable to get email from Microsoft Exchange 2003 on their iPhone 3GS after upgrading to iOS 4. One other user, however, had no problems after the upgrade. The only difference was that the user with his email functioning had minimal messages in his Inbox.
    So for the two other users, I archived email messages to reduce their Inboxes from around 13,000 messages to below 2,500 messages. Once I did this, email started flowing through just fine. I did this to the Sent Items as well, and it worked too. I would give that a try.

  • How do I convert an old iphone to an ipod?

    Hi,
    I recently got a new iphone 5 and want to convert my old iphone 3gs into an ipod for my kids.  I've restored the settings but I still have No Service.  Any advice on how to fix this?  Thanks!

    If you when you say you still have No Service you are referring to the cellular connection on your old iPhone 3gs you shouldn't have one if you are trying to use it as just an iPod.  I suspect either you removed the Sim or the Sim is inactive.  Beware that most cell phones even though the Sim is removed or is inactive will still make emergency calls.

  • Does Adobe have a product to convert PDF to Digital Brochure - HTML5 I believe.  Not EPUB because this takes specific software to open.

    Does Adobe have a product to convert PDF to Digital Brochure - HTML5 I believe.  Not EPUB because this takes specific software to open.

    Possibly naïve in terms of the skills required in what your talking about, but what I’m referring to is done by literally dozens of software companies and is commonly referred to as a digital brochure.  Here are a few:
    www.epageview.com<http://www.epageview.com>
    www.inhousedigitalpublishing.com<http://www.inhousedigitalpublishing.com>
    www.digital-brochure.com<http://www.digital-brochure.com>
    http://www.3dissue.com/
    So what I’m looking for is an Adobe solution similar to these solutions.
    craig

  • Network backup disk does not support the required AFP features

    I have a mac mini with two (4T) hard disks each set as target in TimeMachine. Backups have been made on both for some time. This afternoon one of the disks is being rejected as target volume, with the "network backup disk does not support the required AFP features" error.
    The sparse image on the disk that is the actual time machine target shows a modification tim of 13:09, time machine reports the last backup on that volume as made on 13:08. It seems the last successful backup was made at that time. The other TimeMachine target volume on the same min reports a last backup at 15:28
    So why an error now? What has happend in the last hour, or so, to cause the disk to no longer be suitable? Why only on one virtual disk?
    The mac mini runs OS X 10.9.4 (13E28), the disk with the failing backup volume is formatted with Case-Sensitive Journaled HFS+, the still working disk Journaled HFS+.
    This may be related: A couple of month ago  I lost the complete backup on that disk, when time machine conclude that the contents of the target volume was corrupt. At the time I blamed that at a failed backup when I had accessed the mini over ssh using SLINK when traveling. Maybe that conclusion is wrong and this is part of the same problem.
    Any pointers on how to get my second backup disk working again would be much appreciated.
    Eduard de Jong

    The error message has disappeared!
    Earlier this morning the disk has been used as target for a backup by time machine without triggering the error message. A backup 8 hours earlier has also been made to the same sparse image (looking at the folder names).

  • Are apple wires universal around the world? Or do you require a converter?

    I am traveling to Europe. Someone had told me that Apple products are universal around the world. Basically, insinuating that you do not require a converter. Is this accurate? My biggest fear is that I short the fuse in my apple products.

    Here is an example of what rumple doll is referring to. This is a 85wH Power Adapter for a Macbook Pro.

  • Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

    Hello all,
    I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
    My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
    The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
    But in this case, when I run it, it shows the error that I have indicated in the subject line.
    If you need more details about my project to identify the problem, please let me know.
    Thanks in advance.
    Solved!
    Go to Solution.

    -Please go through pattern matching example which comes along with labview fiirst
    Go to labview Help>>Find Examples and you can search for example.
    -You have create template with angle range and what type of pattern matching you want use.
    -For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
    Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
    Thanks
    uday,
    Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
    Certified LabVIEW Associate Developer (CLAD) Using LV13

  • HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  Could not complete backup to media share.  The network backup disk does not support the required AFP feat

    Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  "Could not complete backup to media share.  The network backup disk does not support the required AFP features."  What are AFP features and how do I get Time Machine to backup to my current external backup?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compresso

    I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compressor/decompressor (codec) installed" Where has it gone? Where do I get a new one? I am getting REALLY REALLY fed up with trying to find an answer!!!!!!!!

    Try to disable hardware acceleration in Firefox.
    *Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for

  • Two Iphones on one itunes account?

    i have just upgraded to an i phone 4 but also want to keep my iphone 3 in my itunes too, can i set up the account so both phones run off itunes but can have different apps etc on?

  • Power Mac G4 stuck in Target Disk Mode

    The other night I put my Gigbit Ethernet into Target Disk Mode so I could migrate my files to a newer machine (a mirrored drive door G4 with dual 1.42mhz processors). After the migration was complete (which took 9 hours), I tried ejecting the target

  • Feature Request, option to relink all unlinked layer masks when transforming multiple layers at once.

    As a professional PS artist who works on files with sometimes hundreds of layers, I often need to transform many layers or groups at once. It is a nightmare to find that after the transformation, a mask did not get included in the transformation, (es

  • PS5: In Raw mode not allowed to create Adjustment Brush adjustments

    I get the following message when I try to use the Adjustment Brush: Unable to create local adjustment. All the local adjustment controls are set to have no effect on the image. How do turn on the local adjustment controls?

  • Error in file #X

    When a run time error occurs, Bridge or Photoshop returns an error dialog that gives the line and file # where the error occurred. Suppose the error was "line 57, file #8". Is there any way to find file #8, other than guessing which jsx file was bein