Does turning off your MacBook by holding the power button hurt your MacBook

Almost whenever I exit out of War Craft 3: The Frozen Throne my Mac Book freezes up, as a result I frequently turn off my Mac Book by holding down the power button- Does this hurt my Mac Book?

There is most definitely a chance that you can cause stability problems (although, it is somewhat less likely that you would cause any harm to the hardware). The likelihood of you causing problems increases directly with how often you shut down this way. You should be seeking a solution to the issue you are having with WC3. As Johathan mentioned, OS X does quite a bit in it's shutdown process. Bypassing that can cause anything from basic data corruption, to stability issues, to a non-bootable system depending on what the machine is in the middle of doing when you force it to shut down. In general, worst case scenario is that you would need to re-install OS X to fix things up. It's really not worth taking a chance on your systems stability for the sake of a game. I would say that you really should try to track down a solution to the problem you are having with the game.

Similar Messages

  • Why does my iMac (on occasion) not shut down, warning message comes on saying i have to switch off by pressing and holding the power button then restart,

    Why does my iMac (on occasion) not shut down, warning message comes on saying i have to switch off by pressing and holding the power button then restart, something to do with a Panic report?
    Thanks
    Brian

    Hi mende1,
    you asked me to post the Kernal panic report then next time it appears, sorry for the delay but it was fine until yesterday when it happened again so here it is, hope you can make sense of this, thank you for your help.
    Regards
    Brian
    Interval Since Last Panic Report:  97797 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    17D8F909-09A9-4BC6-A153-A12F75529506
    Sun Jan 27 09:32:57 2013
    panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff80002b4b31, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x00000000800a9118, CR3: 0x0000000000100000, CR4: 0x0000000000000660
    RAX: 0xffffff80008c2028, RBX: 0x00000000800a9100, RCX: 0xffffff800ae5bf00, RDX: 0x0000000000000080
    RSP: 0xffffff8078713e68, RBP: 0xffffff8078713eb0, RSI: 0x000000005aefd876, RDI: 0x00000000800a9118
    R8:  0x0000000000000010, R9:  0x0000000000000000, R10: 0xfffffe802662d000, R11: 0x00080000000263f3
    R12: 0xffffff8078713f60, R13: 0xffffff8078713f78, R14: 0x0000000000000000, R15: 0x00000000800a9118
    RFL: 0x0000000000010002, RIP: 0xffffff80002b4b31, CS:  0x0000000000000008, SS:  0x0000000000000010
    CR2: 0x00000000800a9118, Error code: 0x0000000000000000, Faulting CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff8078713b10 : 0xffffff8000220792
    0xffffff8078713b90 : 0xffffff80002c4794
    0xffffff8078713d40 : 0xffffff80002da55d
    0xffffff8078713d60 : 0xffffff80002b4b31
    0xffffff8078713eb0 : 0xffffff80002352a5
    0xffffff8078713ec0 : 0xffffff800036489d
    0xffffff8078713ee0 : 0xffffff8000345031
    0xffffff8078713fb0 : 0xffffff8000820057
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    11G63
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
    Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
    System model name: iMac10,1 (Mac-F2268CC8)
    System uptime in nanoseconds: 1750251829240
    last loaded kext at 51464252613: com.apple.filesystems.msdosfs          1.7.1 (addr 0xffffff7f815c7000, size 57344)
    last unloaded kext at 215848970782: com.apple.driver.AppleFileSystemDriver          13 (addr 0xffffff7f825c2000, size 12288)
    loaded kexts:
    com.vmware.kext.vmnet          3.0.0
    com.vmware.kext.vmioplug          3.0.0
    com.vmware.kext.vmci          3.0.0
    com.vmware.kext.vmx86          3.0.0
    com.apple.filesystems.msdosfs          1.7.1
    com.apple.driver.AppleBluetoothMultitouch          70.12
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
    com.apple.driver.AudioAUUC          1.59
    com.apple.driver.AppleUpstreamUserClient          3.5.9
    com.apple.GeForce          7.3.2
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleHDA          2.2.5a5
    com.apple.driver.AppleMikeyDriver          2.2.5a5
    com.apple.driver.AGPM          100.12.75
    com.apple.driver.AppleBacklight          170.2.2
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AudioIPCDriver          1.2.3
    com.apple.driver.ApplePolicyControl          3.1.33
    com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d8
    com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.8f17
    com.apple.driver.AppleIRController          312
    com.apple.driver.AppleUSBCardReader          3.0.6
    com.apple.iokit.SCSITaskUserClient          3.2.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          33
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCISerialATAPI          2.0.3
    com.apple.iokit.IOAHCIBlockStorage          2.1.0
    com.apple.driver.AppleAHCIPort          2.3.1
    com.apple.nvenet          2.0.17
    com.apple.driver.AppleUSBHub          5.1.0
    com.apple.driver.AirPort.Atheros40          505.67.1
    com.apple.driver.AppleUSBEHCI          5.1.0
    com.apple.driver.AppleUSBOHCI          5.1.0
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleFWOHCI          4.9.0
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleACPIButtons          1.5
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.5
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
    com.apple.nke.applicationfirewall          3.2.30
    com.apple.security.quarantine          1.4
    com.apple.security.TMSafetyNet          8
    com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
    com.apple.driver.AppleBluetoothHIDKeyboard          160.7
    com.apple.driver.AppleHIDKeyboard          160.7
    com.apple.driver.AppleMultitouchDriver          231.4
    com.apple.driver.IOBluetoothHIDDriver          4.0.8f17
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSerialFamily          10.0.5
    com.apple.nvidia.nv50hal          7.3.2
    com.apple.NVDAResman          7.3.2
    com.apple.driver.DspFuncLib          2.2.5a5
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.driver.AppleHDAController          2.2.5a5
    com.apple.iokit.IOHDAFamily          2.2.5a5
    com.apple.iokit.IOSurface          80.0.2
    com.apple.iokit.IOAudioFamily          1.8.6fc18
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.AppleGraphicsControl          3.1.33
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.driver.AppleSMC          3.1.3d10
    com.apple.driver.IOPlatformPluginLegacy          5.0.0d8
    com.apple.driver.IOPlatformPluginFamily          5.1.1d6
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
    com.apple.iokit.IOBluetoothFamily          4.0.8f17
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.2.1
    com.apple.iokit.IOUSBMassStorageClass          3.0.3
    com.apple.driver.AppleUSBMergeNub          5.1.0
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
    com.apple.iokit.IOAHCIFamily          2.0.8
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IO80211Family          420.3
    com.apple.iokit.IONetworkingFamily          2.1
    com.apple.iokit.IOUSBFamily          5.1.0
    com.apple.driver.NVSMU          2.2.9
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOFireWireFamily          4.4.8
    com.apple.iokit.IOHIDFamily          1.7.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          177.8
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.driver.DiskImages          331.7
    com.apple.iokit.IOStorageFamily          1.7.2
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.5
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4
    Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.52f9
    Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
    Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST3500418ASQ, 500.11 GB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: Ext HDD 1021, 0x1058  (Western Digital Technologies, Inc.), 0x1021, 0x24300000 / 3
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 3
    USB Device: hub_device, 0x0409  (NEC Corporation), 0x0059, 0x26400000 / 2
    USB Device: Tablet, 0x172f, 0x0037, 0x26410000 / 6
    USB Device: Mass Storage Device, 0x058f  (Alcor Micro, Corp.), 0x6362, 0x26430000 / 5
    USB Device: USB 2.0 Hub [MTT], 0x1a40  (TERMINUS TECHNOLOGY INC.), 0x0101, 0x26440000 / 4
    USB Device: JumpDrive, 0x05dc  (Lexar Media, Inc.), 0xa205, 0x26441000 / 7
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 4

  • HT201150 How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?

    How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?
    With the position of the power button on the Retina MacBooks, any mistake turns off the screen in the middle of a presentation or any activity using a projector or big screen — a huge waste of time to wake up the display, enter password, have the projector sync back, watch audience disconnecting from what was being discussed, etc.
    This is very annoying, and seems to add to the increasing collection of options Apple decided to make by itself instead of allowing the user to choose.
    Come on Apple guys, I'm using my Mac because I want options and lots of preferences to tweak to my needs.
    If I needed the lobotomized version I'd be using my iPad!
    Any way (official or hack) to change this button back to its proper funcionality?
    Thanks!

    cterra wrote:
    How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?
    Not what you want, but you can get the shut down / restart / sleep dialog by holding the power button

  • My IPhone 4 won't turn on , I have tried holding the power button , the home button for 20 secs and it won't work , tried putting it into DFU mode and nothings happened , last night I updated it to 6.0.1 since then it hasn' t turned on , what should I do?

    My IPhone 4 won't turn on , I have tried holding the power button , the home button for 20 secs and it won't work , tried putting it into DFU mode and nothings happened , last night I updated it to 6.0.1 since then it hasn' t turned on , what should I do?

    I suggest charging it for several hours, then trying again.

  • How tu turn of sleep mode after pushing the power button on earlier macbook

    hi,
    ive installed mavericks on my macbook pro 2011. with mountain lion or older macbook versions, pushing the power button brought the menu tu turn of the computer. now with mavericks, it puts my macbook in sleep mode.
    is there a way to turn that off?
    thanks for your help,
    peter

    If you want to see the shut down dialog like previous OS, press and hold the power button for 1.5 seconds.
    http://support.apple.com/kb/PH13962

  • I am trying to get my Dad's computer to turn on.  It's a 17" IMac that was bought around 2007.  Today it just won't turn on.  When u hold the power button down, the white light comes on in the lower right hand of the computer but screen stays dark.

    It have tried pulling cord out if the computer and then plugging it back ...it still won't turn on.   Pls help...next step

    Try using the resetting SMC procedure
    http://support.apple.com/kb/HT3964
    You may have done something similar already, but do it precisely as described.  You should disconnect ALL peripheral devices, except for Apple keyboard and mouse.
    Also, when you plug it back in, if the iMac is currently plugged into an old (or overcrowded) power strip (surge suppressor), try connecting it directly to a wall outlet by itself. 

  • Restart your computer by holding the power......

    This morning i was fooling around with a /usr/local file, i accidently deleted it and the computer stopped responding, so i held the power button for a few seconds and the computer turned off. Upon pressing it again, the apple logo appeared, followed by a black screen with a black box inside it saying restart your computer by holding the power button for a few seconds... so i did that, and restarted the computer.. Nothing, the same box appeared again, Kept trying and trying..
    Please help me identify the problem and solution. Thanks

    Just recently I tried to upgrade my vuze and install limewire and upon installation I suddenly get a gray tint come down over the screen and a multi language message that says 'you need ot restart your computer. hold down the power button for several seconds or press the restart button'. the only way out of this screen is to, as it tells me hold down the power button and stress out my computer. can someone help? I have read up on a similar problem that happens to people at start up but this is particular to these two programs only for me so far...

  • My macbook pro won't sleep - if I select sleep it does so initially, then the disc-drive appears to kick in and it comes back to life.  It also won't turn off (again, the disc drive kicks in) unless you hold the power-button down for a long period.

    My macbook pro won't sleep - if I select sleep it does so initially, then the disc-drive appears to kick in and it comes back to life.  It also won't turn off (again, the disc-drive kicks in) unless you hold the power-button down for a long period.  Help?

    Hi a,
    Try an SMC Reset: http://support.apple.com/kb/HT3964

  • Macbook stuck on blue screen and cant turn it off even by holding the power button.

    Bought a refurbished macbook and it arrived today. was enjoying it for a while then i decided to reboot to get the new OS. I came back to it a minute later and there was a blue screen with the loader on it. Its been in this state for hours now and i cant reboot by holding the power button so i have no idea how to actually do anything. At the moment im leaving it running in its current state hoping it will all be sorted once the battery has run out. ANY help appreciated as i cant find anything whatsoever in forums that has any relation to my problem!!!

    More details bud... WHAT MBP version do you have? What movie player are you using....? Is it a AVI MP4 MKV? IS it a DVD???

  • I pod touch 5th generation was working fine died so i charged it. Now that it is charged when i hold the power button the screen turns dark blue if it on and the apple logo is about to appear but it never does nor does anyother picture. If i hold the

    I pod touch 5th generation was working fine (Not sure what the last ios i downloaded was it should be ios 8 or higher). The battery died so i charged it. Now that it is charged when i hold the power button the screen turns dark blue as if it's powering on and the apple logo is about to appear but it never does nor do any other type of images on the screen. If i hold the home button Siri will say "Siri is not available please connect to internet" but there is still no image on the screen. I've tried holding down the home and power button it restart it but doing this just gave me the same results. How do i fix this problem? What's wrong with my i pod?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • TS2771 My daughters iPod touch does not turn on even after hooked up to charger for over 24 hours. Tried to hold the power button and home button at same time for 10 seconds and still did not turn on.

    My daughters iPod touch does not turn on even after hooked up to charger for over 24 hours. Tried to hold the power button and home button at same time for 10 seconds and still did not turn on.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Macbook pro 2010 only will turn on if i hold the power button down for atleast 7 seconds.....before i could just press it and it would come right on

    macbook pro 2010 only will turn on if i hold the power button down for atleast 7 seconds.....before i could just press it and it would come right on

    I tried those already, did not work.
    I did how ever remove the command key and wiped it down and it turns on perfectly!
    but now the keyboard keys seem to be out of place or something. For example it makes a "ping" sound when i hit some of them, when i hit function or control it puts the letter Z.
    Any input would be great!

  • Everytime I start up my Mac mini I'll be able to use it only for a little while then the beach ball appears and it won't let me do anything I have to keep forcing it to turn off by holding the power button can someone help me?

    I have no external devices connected to my Mac mini but still everytime I use it after about half hour to an hour in whatever I'm using wether it's the Internet or iPhoto or iTunes the beach ball appears and I cannot get it to stop I always have to press and hold the power button and force it to switch off I then do a safe reboot and it starts up again fine but same thing again after a certain amount of time it will freeze. I have also had on some occasions a bright white screen with a folder and a flashing question mark appear but it's not because of any external devices as they have all been removed please can someone help me as I have no idea why this keeps happening to my computer and I'm worried that there's something seriously wrong it's only about 6 months old and I have no experience in dealing with computers ??

    EtreCheck version: 2.1.8 (121)
    Report generated 13 February 2015 15:33:46 GMT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        Mac mini (Late 2012) (Technical Specifications)
        Mac mini - model: Macmini6,1
        1 2.5 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        Intel HD Graphics 4000
            LG TV spdisplays_1080p
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 0:11:35
    Disk Information: ℹ️
        APPLE HDD ST500LM012 disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 499.25 GB (398.54 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
        /etc/sysctl.conf - Exists
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/AVG AntiVirus.app
        [loaded]    com.avg.Antivirus.OnAccess.kext (2015.0 - SDK 10.8) [Click for support]
    Launch Agents: ℹ️
        [running]    com.avg.Antivirus.gui.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [running]    com.avg.Antivirus.infosd.plist [Click for support]
        [running]    com.avg.Antivirus.services.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Internet Plug-ins: ℹ️
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Default Browser: Version: 600 - SDK 10.10
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
             5%    WindowServer
             1%    AVG
             0%    AppleSpell
             0%    fontd
             0%    cloudpaird
    Top Processes by Memory: ℹ️
        215 MB    com.apple.WebKit.WebContent
        125 MB    avgd
        107 MB    Safari
        90 MB    Messages
        69 MB    WindowServer
    Virtual Memory Information: ℹ️
        171 MB    Free RAM
        1.68 GB    Active RAM
        1.53 GB    Inactive RAM
        637 MB    Wired RAM
        1.34 GB    Page-ins
        2 MB    Page-outs
    Diagnostics Information: ℹ️
        Feb 13, 2015, 03:20:28 PM    Self test - passed
        Feb 6, 2015, 08:08:07 PM    /Library/Logs/DiagnosticReports/Kernel_2015-02-06-200807_[redacted].panic [Click for details]

  • Macbook wont powerup, beeps repeatedly when power button is pressed and you need to hold the power button down to shut the beeping off. any thoughts?

    Have a 13" macbook. wont power up. upon hitting power button, the computer sounds 3 long beeps constantly until you hold the power button down for 5-10 seconds. any thoughts out there?

    Thanks guys, i just read a few articles regarding this. i pulled all the ram and tried swapping and reseating ram. it appears both chipsets are fine but one ram slot is bad. computer will boot with either chipset installed in the one good slot but neither chipset will boot in the other slot. bummer....

  • My MacBook Pro 13in Mid-2010 won't start unless I hold the power button for about 10 seconds! Help Please!

    Hello.
    I have a MacBook Pro 13-inch (mid-2010):
    Processor: 2.66GHz Intel Core 2 Duo
    Memory: 4GB 1067 Mhz DDR3
    Running Mac OS X 10.7.2
    Yesterday I opened my computer (was sleeping as usual) and the screen just flasehed white and the computer powered off. The magnetic electricity thingy was connected and was green, so it was fully charged, and connected to the electricity.
    Since it powered off, I tried turning it on again, and again, one second after starting to boot up, screen flashed white and the computer powered off.
    I read somewhere I should hold down the power button longer, so I did, and it booted up. That's why I am able to write this. But every time I turn it off or put it to sleep, it does the same thing when I boot up.
    If I don't hold the power button for 10 seconds or so, the computer won't work.
    Then today, I did a backup of my entie hard drive, just in case. Later, I started using Excel, and about 1 hour after I was on it, suddenly it got really slow. Like I would click on a program like Safari, and it would take over 30-45 secs to start and be ready. And my computer is usually really fast!
    I went on the Internet again, started in safe mode, boot up with option+command+P+R to reset PRAM, and nothing worked. Then suddenly on one turn-off/turn-on (since I can't restart because the computer only starts if I hold the power button for 10 seconds), again it is working at normal speed.
    What can this be? Any ideas?
    I really appreciate your time and help in advance
    Gaby

    GabyBA wrote:
    I forgot to say I had already tried that as well. Just in case, I just tried it again and there was no change :S
    Are you running the Apple-supplied RAM? Have you run Apple Hardware Test? I don't know what else you've tried, but this may be time to do a fresh install of Lion if you have not done so since installing Lion.

Maybe you are looking for

  • Option to convert Planned orders to Process order C

    Kindly suggest, which is the best option to convert Planned order to Process order C from below mentioned options 1) Convert Planned orders to Process order C & send it to R/3. or 2) Send Planned orders to R/3 & convert it into Process order C in R/3

  • Changing date and time on photos

    I changed the date and time of some of my photos in iPhoto, and I kept the original date/time for others. When I merged the two in iPhoto, they fell chronologically, which is what I wanted. But when I created a generic file on my desktop and moved th

  • Issue delivery output

    Dear Gurus... On the VL02N initial screen, After I write outbound delivery number, I want to get print-out without entering the VL02N screen. So I follow the path as Outbound delivery> Issue delivery output and system shows only ONE output OPTION as

  • Sun's JDBC Tutorial. Need a Little Help

    im learning about JBDC using suns tutorial but ive run into a problem. on this page here http://java.sun.com/docs/books/tutorial/jdbc/basics/retrieving.html about 1/7th of the way through they give u some code. but when i used it in my IDE (netbeans

  • Reg Quality Info Record

    Dear ALL, please give me a advice let us say we have a vendor ven0001 who is manufacturing a material a001 in 3 of his plants( plant-0010, lant 0020 and plant 0030 and these three are manufacturing plants of vendor) can we put a control in our plant