Does two seperate client required if the solman monitors DEV and QAS system

Hi All,
This is our client landscape:
1 Dev-SolMan->For all development and quality systems(ECC 6.0, BI and EP).
1 PRD-SolMan->For all production systems(ECC 6.0, BI and EP).
Note: We have build only DEV-SolMan system as of now and we haven't done any configuration yet like either service desk or ChaRm.
The question is:
Do we need to have two seperate clients in DEV-Solman, one for all development systems and one for all quality systems? or Can we have a single client in DEV-Solman to handle all development and quality systems? What is the SAP recommented approach?
Thanks
Sanjai

Hi,
you even don't need separate Solution Manager systems to monitor DEV / QA and Prod. You could use one SolMan client to monitor and administrate all systems / clients.
Maybe it would be a good idea to create different Solution Landscapes, but this depends on your need.
Separate clients are no good option, because CHARM can only activated in on client. Also if you plan to activate charm, you need a solution that contains all systems in your transport landscape (DEV, QAnad Prod).
Kind Regards,
Holger

Similar Messages

Having two oracle clients installed at the same time

Hi, I was wondering if there is a way to have two oracle clients installed at the same time on one computer, and if there is a way to be changing the default client between the two. I need to have installed the oracle client 10g and 8 versions on the same computer, because we have a problem with a legacy application that for some reason only works with version 8, and we need the 10g because our new applications requires 8.1 or later. We are still migrating to the new system but we developers need to have the two clients. Any help is appreciated. Thanks in advance.

Is it possible, sure.
Technically, clients before 8.1.5 were not multi-home compliant, so having Oracle 8 and Oracle 10g clients on the same machine is almost certainly not supported. On the other hand, I know that a number of developers at Oracle had combinations of Oracle 7 clients Oracle 8 clients, Oracle 8i clients, and Oracle 9i clients on their development machines at the same, so you shouldn't have too many major issues.
Most "default client" issues come down to which ORACLE_HOME is first in the system's PATH. Ideally, you would leave the Oracle 8 ORACLE_HOME first in the path and explicitly reference the 10g ORACLE_HOME when configuring anything that relies on the 10g client.
Justin

Two seperate animations running at the same time

Hi
I would like to make a fully automated presentation, with some object moving and the like... I am trying to have two seperate animations running on the same slide. The animations are quite simple - move in, move around, move out. What I would like is that they both act seperately so they start at the same time, but otherwise begins to move at different times and exits at different times. I'm having trouble achieving this as i can only link automatic actions to the last action on the list (i.e. I can't have two trees of actions that start simultaneous)
I hope I have succedes in complicating an otherwise straightforward question with my late-at-night english

You'll have to be more imaginative with the way you structure the builds so you can in fact do it inside one tree. (Not a put down, just it's hard to give more exact answer because the question has few specifics).
Remember you have +*delay options*+ for each build, so two concurrent build/move actions can actually occur at different times in the presentation. Play with the start build and delay controls and you should be apples.

Firefox does not stop loading even after the site is loaded and continues as if it is still loading. I have clocked it to 15 minutes, why?

Firefox does not stop loading even after the site is loaded and continues as if it is still loading. I have clocked it to 15 minutes, why? edit
Details

Sorry, I should distinguish between slow loading and manual reloading.
I understood your problem to be that Firefox never finished loading the page, i.e., some part of the page was loading too slowly.
By reloading, I meant Ctrl+r (or the reload button), to manually reload the page. You can disregard any cached files and reload all content fresh from the server by adding the Shift key, i.e., Ctrl+Shift+r (helpful when specific sites do not load correctly).
If the page is automatically reloading itself over and over, that sounds like a completely different problem.

TS3694 My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not. The error message indicates an unknown error has occurred, with error code 6. Does anyone have any idea what the problem might be and how to solve it? Many than

My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not. The error message indicates an unknown error has occurred, with error code 6. Does anyone have any idea what the problem might be and how to solve it? Many thanks.

Hi
I followed this guy's instructions and it worked:
http://evsiphone.blogspot.com/2009/05/iphone-iphone-could-not-be-restored.html
I did disable the security (AVG and Zone Alarm) when I tried on my own PC. My wife's laptop which eventually got it working also uses AVG and Zone Alarm but on an XP O/S whereas my PC is Vista - maybe this is why.
Cheers for you help.
Andy
Message was edited by: bigbadandy

I let my iphone 4S die completely and after i put it on the charger it cuts on then cuts right back off and keeps doing so. i left it on the charger all night and when i woke up its still doing the same thing. please help

i let my iphone 4S die completely and after i put it on the charger it cuts on then cuts right back off and keeps doing so. i left it on the charger all night and when i woke up its still doing the same thing. please help

imanfromsweden wrote:
Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
Please help....
On belhalf of my fellow volunteers, the answer is, "We'll try our best."
My advice is to try not to treat this like it is a paid service provided by compensated professionals. Ask nicely and one of the nice folks here might take some time out of their weekend to offer advice.

Requirement for the Q monitoring report

Hi experts,
i have this requirement. could you please tell me the solution.
<b>Requirement for the Q monitoring report
Transaction code LL01
Requirement: The report to be generated for the open documents in all six warehouses D01 to D06.
Option can be that one batch job should be created in ECQ which will run everyday and give us the report.
Variants are set for all warehouses to capture the report.
Please note that theses variant is set to capture all the Stocks in interim storage types except 915
Additional Variant is also set into the report to take the CREATED BY field in the displayed data. This can also be automated in the report.
The steps which we follow to get the report is as follows
Thanks & Regards
Venkat</b>

Hi,
I donot think such Multi level Consumption Report is available. I think if use collective order concept, u can get it. Otherwise u have to pass the list Production order number for each BOM level at COOIS.
or u have to develop customized report.
Pradeep

How does c:url tag know when the session is cookieless and thus to redirect

i have been looking at the source code for c:url tag and can't figure out how they are doing that. I need a way to do that in a jsp, to check if the cookies are allowed or not.

how does c:url tag know when the session is cookieless and thus to redirecthuh?
What do cookies have to do with redirecting?
Cookies get encoded into a URL using the method in HttpServletResponse: response.encodeURL() or encodeRedirectURL().
That method determines whether or not it prints out the session id as part of the url, or it gets uses cookies.
You can try: request.isRequestedSessionIdFromCookie().
If that is true, you know that session cookies are supported (or at least that one was)

I have disabled my iphone 5 and connected it to Itunes, It now says its doing a sotware update. does this mean it will wipe the old password off and be able to use my phone again?

I have disabled my iphone 5 and connected it to Itunes, It now says its doing a sotware update. does this mean it will wipe the old password off and be able to use my phone again?

When you restore your iPhone, it will erase everything from your iPhone including the passcode. You can restore a backup from iTunes or iCloud to get your infromation back though. This article may help http://support.apple.com/kb/HT1212

How can I get the No. of package and requesting system name in user exit?

Dear all,
Is there anybody knowing how to obtain the extracting package number and requesting system name in the user exit "EXIT_SAPLRSAP_002" ? here is detail on my questions as below:
For package number. If extracting 100,000 records of 0MATERIAL_TEXT , and the package size is 20,000, then there are 10 packages, when executing the user exit, how can I know which package I am extracting on?
For requesting name, when executing the user exit, how can I know the logical system name from which the extraction request is sent?
Thanks.
best regards
Patrick

Hi Mansi,
Thanks for your quick response.
The background of this requirement is, in the datasource 0material_Plant_Att, we added two fields in the extraction structure, one is variable price, another is previous year's variable price, which need to be obtained by searching data KEKO & CKIS in the user exit, these tables have the huge data volume, in each data package, the user exit needs to be executed once, so the heavy searching needs to be done once, consequently, the total running time of this request including several data packages is very long. In order to improve the performance, we design the following logic:
1. Create the temporary tables YCKIS & YKEKO in R/3.
2. Run BW request in BIW.
3. In R/3, If this is first data package of this request, delete all data in YCKIS & YKEKO, then search the data from CKIS & KEKO ( Average 20 million records), then insert these data into YCKIS & YKEKO ( Average 0.2 million records).
4. In R/3, if this is not first data package of this request, then search the data directly from YCKIS & YKEKO.
You can see in the above, in the step 4, the data searching performance can be improved significantly due to reading data from temporary table, this is why I need to know the No. of data package. In addition, apparently, it can not be done in BIW side since the performance issue is in the user exit rather than in BIW. Also it is very difficult to setup one counter to deliver this since we do not know when to reset the counter. For example,
- Assuming there are 3 data packages.
- 1st day, we schedule one request from BIW, in R/3,
   -> At 1st package, counter = 0+1=1
   -> At 2nd package, counter =1+1= 2.
   -> At 3rd package, counter = 2+1= 3, then reset counter = 0 for next request.
Question 1: How can we know the 3rd package is last one?
Question 2: If during the 2nd package, the extraction job is cancelled exceptionally, the counter value is 2 not 0, then for the next request, the data searching is not correct, right.
Hope the above is clear, and apology this email is too long.
Thanks.
best regards
Patrick

What is CTS ? what is the role of CTS in between DEV and QAS?

Dear
What is CTS ? what is the role of CTS in between DEV and QAS?
Thanx & Regards
Mohamamd Nabi
[email protected]

hello, friend.
actually, you can search for subjects like this in the threads archive. you will be pleasantly surprised to find that there are already many threads with similar issues and that you can find answers to even more otherwise unrealized questions. and you don't have to wait for anyone to reply.
it looks like the issue is urgent for you, and this is why i am attaching this feed from Sadhu Kishore, which was posted some time ago... (if he replies to your thread, you may choose to award him points).
"Hi,
The transport workflow provides a framework for transporting enhancements or new developments of existing business functions in a system landscape. It provides a direct connection between development and transport administration. The transport workflow manages the transport process, determines the user for each individual step automatically, and then displays an interface which they can use to perform the task directly.
It is an efficient method of transporting a selected number of requests into a group of transport targets, and uses clearly defined approval steps to ensure the quality of your target systems. The requests can be transportable change requests, Customizing requests, relocation transports or transports of copies. The transport targets do not need to be located on defined transport routes. However, the transport workflow can involve some risks, caused by the dependencies between transport requests:
Import sequence
It is important that you import requests in the correct order, so that development work is up-to-date in the target system.
Incompleteness
It is important that the functions transported in the transport proposal are complete; otherwise errors may occur in the import system.
A request is not imported, but it contains an important data element. You use another request to transport a table that references this data element. Since the referenced data element does not exist in the target system, activation errors will occur when you import the second request.
The transport workflow is a generic workflow. Its ability to process the transport route configuration in TMS enables it to adapt itself to any system landscape. This means you can transport multiple requests into multiple targets, even if these targets are not located on the transport routes.
This reduces the amount of work for the transport administrator significantly. The automated nature of the workflow also reduces the likelihood of errors during transports.
You can use the transport workflow in two different ways.
Transport workflow as a transport strategy
If you have production systems in your landscape that can only accept approved transports, we recommend that you use the transport workflow to organize and coordinate the transport process.
To do this, set Workflow-controlled transports as your transport strategy and configure the transport workflow.
When you release a transport request, the transport workflow starts automatically and the screen Create Transport Proposal appears. The requests are then released implicitly when the transport proposal is sent to the transport administrator.
Special transport workflow (mass transports)
You can use the special transport workflow to make transports that do not follow the defined transport routes or that take place outside the normal transport schedule (part of the mass transport strategy). These transports may be corrections made in the development system that have to be transported into the production system without delay.
To use the special transport workflow, set Mass transports as your transport strategy and configure the transport workflow."
thanks. you have been most generous.
regards.

A process for the performance monitoring, tuning and fixing issues

Hello
Any recommendations for 10g a process/procedure/methodology for the performance monitoring, tuning and fixing issues for a team to follow ?

Ranker wrote:
Hello
Any recommendations for 10g a process/procedure/methodology for the performance monitoring, tuning and fixing issues for a team to follow ?1) upgrade the DB to a supported version.
2) Read The Fine Manual; Performance Tuning Guide
http://docs.oracle.com/cd/E11882_01/server.112/e10822/toc.htm
Handle:     Ranker
Status Level:     Newbie
Registered:     May 12, 2013
Total Posts:     13
Total Questions:     4 (4 unresolved)
How sad!
why do you never get your questions answered here?

Which system is better making the TDC among DEV and PRD

HI,
which system is better making the TDC among DEV and PRD what are the advantages and disadvantages
thanks in advance
subbu

hi arif
TDC means Transport Domain Controller
it is the system which contains common transport directory and which administer the all the systems taking part in TMS.
if any other informaion regarding this welcome.
SUBBU
Message was edited by:
subbu chennuru

Ok... So can you have two seperate itunes accounts on the same computer?

My dad is getting an ipod for christmas... and well I don't want him on iTunes draining all of my money. Is there a way that you can have two seperate accounts on one computer?

Yes. If you want separate iTunes accounts, the easiest way is to set up 2 users on the computer, each with their own iTunes library.
If the two phones share the same iTunes account this is not necessary.

Two MI Clients running on the same system

Hi All,
I have a MI Client running on my desktop.
I want to install another MI Client without uninstalling it i.e. I want to have two running fully functional MI Clients on my desktop.
Is this possible, how do I do it?
Ankur
(Both MI Client are of the same SP level)
(I tried to rename the existing MI root folder and then running the setup.exe of MI client, then I cut&pasted the whole MI root folder into my D drive and then tried running the setup.exe - both times when I ran the setup.exe it asked first to Remove my current installation... )

Hi Ankur,
Please follow the instructions mentioned in the following guide to achieve what you wish to do.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fecd11da-0801-0010-0da2-ffee3d04684f
Best Regards
Sivakumar
PS: Forgot to mention one additional stuff. I you plan to run both the clients simultaneous, then you need to change the tomcat port on the client since two clients cannot share the same port. To change the port of the client do the following.
Under your MI home folder go to "CONF" directory and open "server.xml" file and in here change the following value from 4444 to any other value. (4444 is the default port)
<Parameter name="port" value="<YOUR NEW PORT NO>"/>
Similiarly add the following properties in the MobileEngine.config file present in the SETTINGS folder of MI Client.
MobileEngine.Runtime.Port = <YOUR NEW PORT NO>
MobileEngine.Jsp.HomeUrl = http://localhost:<YOUR NEW PORT NO>/
Add a file named port.txt in the MI Home folder and in it mention <YOUR NEW PORT NO> without any other values.
Edited by: Sivakumar V on Aug 25, 2008 4:33 PM

Does two seperate client required if the solman monitors DEV and QAS system

Similar Messages

Maybe you are looking for