Does TX2z has a bios lock on its WIFI card?

Does TX2z has a bios lock on its WIFI card? i'm planning to change may wifi card.. it would be waste if its locked.. tnx..

Yes, you heard it right. HP has whitelist of their wifi card.
Evenif with the wifi card that pull out from other HP model, there is posibility that card may not work.
How to identify the compatible one? Downloading Service and Maintenance guide of your model would let you know the compatible one.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Similar Messages

After updating iphone 4s to 6.1 version my battery percentage stood at 1 percent. Does anyone has same problem? Or its update bug?

After updating iphone 4s to 6.1 version my battery percentage stood at 1 percent. Does anyone has same problem? Or its update bug?

THIS is "quite a few": https://discussions.apple.com/thread/3391947
As are these:
https://discussions.apple.com/thread/3391947?tstart=0
https://discussions.apple.com/thread/3484755?tstart=0
https://discussions.apple.com/thread/3481668?tstart=0
https://discussions.apple.com/thread/3518760?tstart=0
https://discussions.apple.com/thread/2755090?tstart=0
https://discussions.apple.com/thread/3507356?tstart=30
https://discussions.apple.com/thread/3482083?tstart=60
https://discussions.apple.com/thread/3492588?tstart=60
https://discussions.apple.com/thread/3397244?tstart=90
And older ones:
Battery Meter/Life Problems with 4.0.2
4.0.2 guzzling my battery. Your's too?
4.0.1 battery life
Battery runs out very quicky in iOS 4.0.1
Battery nearly nonexistant after 4.0 upgrade
Dead battery after few hours on standby using 4.0 software
3.1.3 battery problem
OS 3.1.3 battery issues
3.1.3 upgrade - shortened battery life?
Battery life cut after 3.1.3 update on iPhone 3G
3.1.3 Firmware is a battery killer - how do I back out this upgrade?
Poor battery life with iPhone 3G running 3.1.2
3.1.2 EXTREME battery drain - what gives?
3.1 Battery nightmare
iPhone 3GS with fw 3.1 – battery life gets even worse
Battery Issues with 3.0.1
BATTERY drain with 3.0
upgrade to 3.0 drains my battery
Battery Drain after Update 2.2.1
Battery Life Radically Decreased after 2.2.1 Firmware Update
As you can see, battery issues have been common since the first iphone, frequently reported after an upgrade, but not always. So to blame a specific version doesn't describe the problem sufficiently to find a resolution.

My Mac book pro 2011 has lost its wifi card! Message says it is not installed; however, it was there until today. What has happened?

My Mac book pro 2011 seems to have lost its wifi card. It was there until today. Now message says wifi card is not installed. What's happening?

Try resetting the SMC and PRAM:
SMC
http://support.apple.com/kb/ht3964
PRAM
http://support.apple.com/kb/PH14222
On the SMC, you want the process for "a battery you should not remove yourself."

Satellite C50: Has anyone ugraded Atheros to Intel WiFi card?

Has anyone actually replaced the Atheros wifi card with the Intel centrino one?
If so can you recommend one with 2.4/5mps.
Does the C50 have two internal antennae?
I take it the card in under the keyboard?

Hi
Hmm I guess even if keyboard removal isnt very difficult for people with disassembling experiences, you would lose the warranty.
Therefore I would think twice performing such procedure.
But I guess you will need to disassemble the whole notebook (removal of bottom cover would be necessary) in order to get access the WLan card.
In my opinion this is more tricky as an simple keyboard removal.
If I would be you, I would ask some authorized service engineer for WLan card replacement.

The name for my email in thunderbird now has a Paddle Lock showing on it. What does this mean? Can I get it off?

When I open thunderbird and get logged in my Email address name at the top of my thunderbird email has a Paddle Lock on it. What does that mean? Can I get it off? I am using a VERIZON email address. Over the last 2 days I have not been able to down load any of my incoming email messages. It keeps asking me for my Password which I type in and then it says its incorrect. After resubmitting my password I get a Error message says #0012 password incorrect. Is this something thunderbird did or happened from the new update for Ver. 31.1.2? I need help.

The padlock indicates a secure connection to the server. You don't want to get rid of that.
Please check with Verizon whether something has changed on their end.
https://support.mozilla.org/en-US/kb/problems-sending-and-receiving-messages

My macbook pro has been shutting off on its own. The power cord "shuts off" (does not work) simultaneously. Does anyone know what is wrong? or what could be the problem?

My macbook pro has been shutting off on its own. The power cord "shuts off" (does not work) simultaneously. Does anyone know what is wrong? or what could be the problem?
When my mac finally turns on the date/time is reset a windows pops up saying, "Your computer's clock is set to a date before January 1, 2008. This may cause some applications to behave erractically."

Resetting your Mac's PRAM and NVRAM
If you have Apple Care you should give them a call.

My Iphone4 charges when The battery has fully died but when its on the lighting bolt does not appear. "Help"!

My Iphone4 charges when The battery has fully died but when its on the lighting bolt does not appear. "Help"!

Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
Suggest that you take full advantage of the above.

Does apple has its own internet? I have AT&T right now and its very expensive.

Does apple has its own internet? I have AT&T right now and it is very expensive.

Apple isn't an ISP.
(72287)

Does My MS-6534 Has AGP/PCI Lock Feature?

Hello, I would like to ask, does my MSI MS-6534 i845 has AGP/PCI Lock feature?
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=40
Does it support overclocking?
Cause I want to overclock my CPU and I afraid it will cause some damages to my VGA Card or PCI slot card.
My PC specs:
Intel PIV 1.5 GHz (100x15)
SDRAM 256MB + 128MB PC133, total 384MB
Seagate 7200.7 40GB
Sapphire R9500 128MB mod to R9700
PSU 400 Watt
Last week my soundcard didn't sound anything after I set my FSB from default 100 to 113.
And then my PC boots so slow.
I play Wining Eleven 7 adn it goes slow, not as usuall.
Does somebody can give me some solution.
Sorry for my English.

I afraid that my VGA card was damaged cause i overclocked my CPU too high.
Are there any indications of damaged VGA Card or other peripheral like harddisk or soundcard?
I so afraid.

Why DDL during SELECT is possible. Or why SELECT does not put a table lock?

This is a question to people who really knows Oracle internals or/and RDB theory.
(The question is relocated from another thread for not hijacking on that's original question.)
Why DDL during SELECT is possible? Or why SELECT does not put TM 2 Row Shared lock on table(s)?
This not locking causes a possibility while one session is running a long select, another can truncate and even drop table(s) that are being read by the first session.
I think, humbly assume, that Oracle does not put TM 2 lock on tables, that are being simply SELECTed, by some significant technical reason. But I do not know this reason. If somebody knows please shed a light.
Also, if you know that this behavior is totally correct from perspective of RDB theory, please explain me.
I'll try to explain my point.
It is a matter of data consistency and integrity that is supported in Oracle everywhere except this place.
a) If one session is reading data from moment T and other session changes data on its way at moment T1, the first session wont read that changed data, it will read the data that was there on moment T.
This is declared as Read Consistency principle.
b) If one session is changing data, and another session tries to truncate or drop table - the second session will fail with error ORA-00054: resource busy and acquire with NOWAIT specified.
This is declared as Data Integrity principle.
c) But why not to follow the above principles in case when one session reads data and another session tries to truncate or drop table (or do other DDL operations)?
It is counter-intuitive. Why not to put TM 2 (SS) lock during SELECT execution that would prevent DDLs on this table?
What I only can assume is that this is only because some technical difficulty or limitation.
What is this limitation or other reason in favor of which Oracle sacrificed consistency in this case?

user11181920 wrote:
Aman,
There was no need to clarify how DML lock works, I know that.
Also I know that in Oracle a Select does not lock neither table rows nor table itself.
The reason I mentioned it because you brought up the word change which is far better suited for DML's than DDL's as the former has a requirement to have its Undo preserved.
Again, my question was why Select does not protect itself by locking table(s), partitions and indexes?Protect from what? There is nothing wrong with doing a select. What would happen with a select doing a lock on the table before being executed in its entirety (forget DDL and DML altogether for a moment) ? State one good reason that there should be a lock for the select. If it has to, it would be always isn't it?
The keyword here is concurrency and that's what is the best when the number of locks obtained are lesser at non-required operations. A select doesn't change anything that's why in Oracle, there is no read-level lock.I am not saying about row locks while reading. They are not needed because Undo resolves concurrency.Only in the case of DML where the change is still active and the buffers are dirty. With a DDL, its an implicit commit.
I am asking why Select does not enqueue one, only one lock per object that participates in the Select?Again, my question back to you is, what good you would get from it? What purpose it would solve?
It is not very expensive, I suppose. But it would protect from DDLs that can destroy the Select's result set. You have seen in your system and in my demo(and that's what the the question was on the other thread also) that the result remains intact and its not a behavior from now. Its the same since the time I have started learning Oracle. Can you explain that why you think that the result of select statement would be wrong for a drop table? I believe, its been stated repeatedly that if the select has no requirement to look back the table, it would get completed. Only if the select needs to access the table again, it would fail. So even if we consider your explanation, there is no wrong result shown at all. Once the session encounters that the table is dropped for the statement, the execution stops right away. So where is the destroyed result?
Yes, it is less dangerous when Select does not lock table comparing with what would happen with DMLs in such case (that is why DMLs protect themselves by TM 3), it affects only the Select and its consumer, but still ... I don't understand this Oracle's decision. What is a reasoning behind it?.As I said, to improve concurrency.
Aman....

Does the S10 support BIOS tracking such as Computrace (lojack for laptops)

Computrace apparently has partners with many manufacturers, including Lenovo. Does the S10 support BIOS installation, or will I be limited to a software only install?

Ah yea, now I see where it could have been confusing. Computrace is also known as "lowjackforlaptops' and is the same company as the link you posted, absolute.com. Actually, I think computrace is its previous name. After some research, I think it may be one of the best solutions. Only issue is, I think that for the PC version, all it really does is log IP addresses, which can be accomplished with some free software, such as "Locate PC". I suppose 1 good advantage to computrade/absolute.com is that they handle all the investigation and warrant requests, which is a nice touch.
Back to "Locate PC". It's free, runs silently, and emails you (via smtp server) each time the IP changes on the computer that it is installed on. I installed it last night and it has successfully emailed me each of the 3 times I relocated to a new location (new IP address). I am not sure absolute.com does much more than this.

Find my iphone what does it do when you lock it

got a mac book pro and sign in with my apple id . set it up and then re boxed it to ship to new address overseas. Laptop must have got stolen as it never made it to me. Loaded Find my iphone on one of my other computers and check to see if it was under my profile . It came up with someones name on it
Went back to apple support and saw that the computer in question was under my profile. Under the name of the computer in question it has play sound , lock and erase Mac.
Can you explain to me what each one of those items will do? If it is lock does it become a paper weight for the guy that got it? can he unlock it? and if I earse will it now allow the guy to have a free computer? As if has a new computer name other then what I had named it will he beable to see any of my files?

I believe it is tracked by the serial number so I dont think it would matter if it was wiped. The fact that he/she has "Find My Mac" switched on suggests it has been setup with new user but is still tracked under your Apple ID/Serial.
If you wipe it, i'm not sure exactly what happens, you would have to ask Apple directly, I would give them a ring and write down all the questions you want to ask so you dont forget to ask.
I'm curious, how far away is the macbook? Could you go to near the location at night and select "play a sound" you never know you might get lucky, its a high pitched sonar sound, although it doesnt override the sound level, so if the laptop is set to low volume, you may not here it.

I have been transfeing my DVD footage to I movie using handbreak and the spinning wheel of death has arrived and locked up I movie as I tried to import footage. The message says, "Optimizing movies, processing event DVD" but I can't get out of it.

I have been transfeing my DVD footage to I movie using handbreak and the spinning wheel of death has arrived and locked up I movie as I tried to import footage. The message says, "Optimizing movies, processing event DVD" but I can't get out of it.

Yes I held them down till the apple logo appears, then spinning wheel and repeated boot up process. I only knew it was going round in circles because the charging sound kept repeating every so many seconds.
I am downloading iOS.5.0.1 now to do a complete factory restore. I hope this works. I have been looking online for hours for fixes and I have very little batter on it as its been spinning for hours now.
Why do things like this happen? I am sat there watching tv and one minute the settings folder is there then its not! How does that happen? It just disappear? I hadn't moved it to another folder or deleted it, it just.... went!

I have now purchased easy a twice which has cost me 14 pounds both times the video has not loaded i has come up with "!" its asking e to locate the file and i have tried to i typed in easy a on finder and spotlight and it hasn't come please help

i have now purchased easy a twice which has cost me 14 pounds both times the video has not loaded i has come up with "!" its asking e to locate the file and i have tried to i typed in easy a on finder and spotlight and it hasn't come please help

Janieburmy,
You can always deauthorize all your machines from your store account page — just log in and view your account settings and there's a button to deauth all your machines. Which just means for the other machines, it will ask you for your store ID / password the next time you play a purchased song.
So, let's try the filter experiment.
On the start menu, click on "run". in the space it provides enter "regedit" without the quotes. This will open the registry editor.
Find the heading HKEYLOCALMACHINE. Click on it.
Find the heading SYSTEM inside it. Click on it.
Find the heading CurrentControlSet. Click
Find the heading Control. Click
Find the heading Class. Click
Find the heading that begins {4D36E965- Click
Go up to the Registry menu and select "Export Registry File... command. Make sure the "Selected Branch" radio button is checked and save that off somewhere that you can find it.
Delete the key named LowerFilter.
Select the key named UpperFilter, right click, select "modify". Then edit the text in the dialog to just say "GEARAspiWDM" followed by hitting the return key, the return after the word is important.
Then reboot, and see what iTunes does.
To get the system back to its previous state. Run Regedit again and use the Registry menu -> Import Registry File... command and select the file that you saved off in the first section.
I'm particularly interested in getting rid of the "AFS2K" driver in the chain — that's a old driver from a company that hasn't existed in years.
To answer your last question, why am I doing this?... I'm paying off a karmic debt. And someday we'll start that Tequila for Toonz paypal account and then I'll be set.

Why does illustrator cs6 crash or lock up?

why does illustrator cs6 crash or lock up when i try to save any file that has a placed image in it?

Please follow these steps:
Open the “Task Manager” when the Adobe Illustrator CC crash window is displayed.
In the Task Manager window right-click on the name/string “Adobe Illustrator CC” and select the option “Create Dump File” in the context menu
It will display a dialog which says that it will create a file “Illustrato.dmp” in your “Temp” folder. Click on OK to create this. Wait for the action to get this completed.
Once the above file gets completed you can have this file by typing “%temp%” in your “Run” window (press “window button + r” on the keyboard). On clicking the enter key the TEMP folder can be opened.
Look there for the file name “Illustrator.dmp” and share it with us a dropbox link on [email protected]
Please also mention the thread link when sending the dropbox link.
Regards,
Dhirendra

Does TX2z has a bios lock on its WIFI card?

Similar Messages

Maybe you are looking for