Does UCM 11g provide any default skinning options?

I have 2 questions basically:
1 )In UCM 10g there is an option to select skins IN My Profiles menu which provides 2 skin options, Oracle and Oracle2.. Is it possible in 10 G to create a website and use these two skins in your website to change menu, layout etc?
2) My actual area of work is to create a website in UCM 11g, i couldn't find any such option in 11 G which 10 G provided in My Profiles. Are there any default skins provided by 11G. How can I make use of these skins in my web application?
I found out that we can apply different kind of skins in 11g using ADF Faces. But that is not to be used in my project. Is it the only option in 11g?
Thanks in advance.

OK I think you have confused two things here.
1)UCM ships with a native interface that is delivered by UCM based on HCSP/IDOC (A proprietary server side scripting language for generating HTML) this has been the case for about 10 years or so. THis native interface is used to provide the basic CMS capability and is oftent used as a simple clean front end for document management type deployments. UCM has very limited abilities to natively support personalisation (it does this by storing user settings on the file system) and one part of this is the ability to choose a layout and a skin. THe rendering of this profile is done via the HCSP/IDOC.
2)Since the Oracle acquisition of Stellent (~2007) there have been a number of productised ways to integrate UCM behind the Oracle ADF front ends of JDeveloper, WebCenter etc. The latest version of Site Studio lets you do just that using SSXA. I am not an ADF guru switiching between skins sounds perfeclty reasonable. BUT this has NOTHING to do with the old Oracle Oracle2 skins as far as I know.
I think you may be trying to run before you can walk really. First get to know UMC, Site Studio and ADF, then look at Site Studio SSXA and hopefully you will understand how/where skins can fit in.
Not trying to put you off but you have set quite a challenge to yourself
Tim

Similar Messages

Does Jdev 11g Provide the Introspection feature?

Hi Everyone
Does any one have the idea whether Oracle Jdev 11g supports the Introspection Design pattern?
My Requirement is like I have two DTO's(Data Transfer Objects). The Source DTO has 100 attributes approximately. I need to have a feature/framework something like that it takes two DTO's and transfer the data from Source DTO to Target DTO and returns the targetDTO as output.
I have seen this reature in Struts Framwork (org.apache.commons.beanutils )
Thanks in Advance

Why don't you just use the beanutil code?
This is nothing specific to jdev, is just java. One other way is to write this feature yourself using reflection.
Timo

I am trying to locate my iphone - believe it was stolen. find my phone says phone is offline. what does that mean? any other known options for locating it?

What other options are available if your iphone is lost/stolen but it registers as "offline" on find my iphone location services? I imagine if I suspend the services, this eliminates the "find my iphone" features. Feel at a loss here. Anybody have any other information to share on this topic? Thanks.

You can put it in lost mode, which will be executed when it goes back online, if it ever does. See http://support.apple.com/kb/HT5668.

Does Golden Gate provide any Webservices to start and stop services?

Hi all,
We are trying to use GG in our application. But we need a way to start and stop services from java code.
Is there any Webservice interface or API to start and stop Golden gate services like GG manager, extract and replicat processes??
Thanks in advance for your help.
Yamini.

You can control this at a database level using EVENTACTIONS parameter.
Create a table at source & target called "EVENT" with field EVENT_TYPE ( example names only - please call it what you like ) .
at Replicat config actions based on the data passed into the EVENT_TYPE column
MAP GG_ADM.EVENT TARGET GG_ADM.EVENT, &
FILTER ( (@STREQ(@IF(@COLTEST(EVENT_TYPE,PRESENT),EVENT_TYPE,"No EVENT"),"STOP") = 1)), &
EVENTACTIONS (IGNORE , LOG,STOP);
You'll need a seperate replicat to handle the start
MAP GG_ADM.EVENT TARGET GG_ADM.EVENT, &
FILTER ( (@STREQ(@IF(@COLTEST(EVENT_TYPE,PRESENT),EVENT_TYPE,"No EVENT"),"START_APP_02") = 1)), &
EVENTACTIONS ((SHELL (${GG_HOME}/diroby/start.ksh R1APP_02 )));
Hope that helps

System no longer does session restore but when trying to configure, it does not provide me with the option to show windows and tabs from last session

Before I updated the latest version of Firefox, every time the browser shuts down in error, I would get the System Restore feature which was really nice. Now, this no longer happens and when I went to configure this ability, it does not even provide me with the option to select to show windows and tabs from the last session. How can I get the restore session feature working again?

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Deselect: [ ] "Permanent Private Browsing mode"
* http://kb.mozillazine.org/Session_Restore
* https://support.mozilla.com/kb/Session+Restore

Autonomy Oracle UCM connector to access Oracle UCM 11g

Hi,
How do I setup Oracle UCM 11g instance so that we can test the Autonomy Oracle UCM connector? Are there any specific configurations or do we need to install anything to make Autonomy Oracle UCM connector to access Oracle UCM 11g. Any help is appreciated.
Thanks

Autonomy sells a connector that will index items in Oracle UCM into the IDOL Server. You'll have to check with Autonomy on the versions supported and the cost. With this, you could get UCM information into IDOL just the same as you are doing with HTTPFetch and FileSystemFetch.
As for connecting UCM into the WLP Virtual Content Repository, there is not yet anything provided out of the box. However, you can implement your own CM SPI to provide this or you can wait for the product to provide it. It is my understanding that there will be a VCR integration via the CM SPI coming soon.
Finally, BEACMRepoFetch is basically a pre-configured and privately used instance of FileSystemFetch. This is used by the BEA Content Repository to populate the IDOL Server index for full text searches coming through the VCR full text search API.

Accounts in UCM 11g from external LDAP provider

Hi,
We are developing an application using UCM 11g. For authentication and authorization we are using external LDAP. Following are the steps followed to configure the UCM 11g for external LDAP.
1) Created User and Groups directory in LDAP
2) Created user and group in LDAP.
3) Assigned users to the groups.
3) Created accounts in group directory .Account name start with @ and ends with (RW)
4) Created a new provider in WLS.
5) Created a new JpsProvider in UCM.
Now, roles(groups in LDAP) and user are coming properly form LDAP. but the accounts are populating in UCM.
Can anybody tell me the solution for this problem
Thanks in advance..
Regards,
Nitin

In theory there is no limit, but as with most of the products and features inside the Content Server it comes down to design and size impacting performance.
So there is no simple answer.
The more complex answer is you need to try to keep things as simple as possible while still completing your goals.
For instance the Folders component in 11g is limited (hard coded) to 1000 files per folder maximum due to performance degradation if you put more in your folders. Many people just try to put more in and before the hard coded limit in 11g people did and their folders browsing became almost unusable due to slow browsing of the folder structure and files in side.
Similarly with Security we can impact performance with too many security groups, badly designed Roles to access security groups or badly designed Account structures. Notice I only said "too many" on Security groups but not "too many" on Accounts. You should try never to go above 25 security groups (this is not a hard coded limit just a best practice) and the "badly designed" part of roles and accounts can lead to bad performance and even broken security.
It comes down to DB performance, DB limitations and code limits.
First off be aware that there is a limit on how long a query in the DB can be. Commands and SQL in the DB are not endlessly long, there is a maximum number of characters. Keep that in mind as we go along into the next parts.
Second be aware that if you make a badly built query it will take a long long time.
Third be aware that when you are building security models in UCM these security structures go DIRECTLY to DB queries and remember the above 2 points.
So every search in UCM is a query when you take it back to the DB level, and every search requires a behind the scenes security check to make sure you can read the documents you are searching for. So any query built in the search interface gets an additional set of parameters automatically when executed (security).
So now we need to also think about your Metadata and not just the Security on that limited length DB back end. Do your users have 99 metadata fields (I hope not) and if they do do they use most of them while searching? How long will that query be before you add the security query?
Back to the security parts with accounts.
If you have your users having only a few roles providing only access to a small number of security groups and those same users only having a few accounts then searches will get a short security access query added since the number of additional checks for security are small. If the roles and group accesses and account accesses are very large (to the extreme limit) again this will be easy to make a short query due to the small number of excluded security roles and accounts.
BUT and this is a biggie. IF the users are given a number of roles and accounts that is middle of the road for number of total accesses then the query is as long as it can be and if the metadata is complex and large too then you may be running into the limit of Query string in the DB and your query may get truncated which results in a broken security model maybe.
That is not even talking about the efficiency of the query and how long it takes.....
Sorry for the book like reply to your simple question, but it really is not a simple question. :)

On my iCloud account I can see an alternate email ID which can be used to login to my account, this email ID does not belong to me so I need to delete it. Please advice the best possible way as it does. It show any option to delete that ID

On my iCloud account I can see an alternate email ID which can be used to login to my account, this email ID does not belong to me so I need to delete it. Please advice the best possible way as it does. It show any option to delete that ID

Do the alternate e-mail address ends with me.com or icloud.com?

I'm a video editor working primarily in FCP7 and just purchased the latest Mac Pro running Yosemite ? Does anyone know if any options have become available for running FCP7 on this platform ?

I'm a video editor working primarily in FCP7 and just purchased the latest Mac Pro running Yosemite ? Does anyone know if any options have become available for running FCP7 on this platform ?

It would "run" (more like Sunday stroll or walk) if you installed Snow Leopard in a VM. Especially if you have 6-core (and would help to have 6 or 8 cores anyway if you were able to and intend to make best use of nMP for video editing).
If you "classic" Mac Pro was 2009 or later, adding two AMD graphic cards, upgrading the processor to 8-core 3.xGHz would have gotten you a FCP-X capable machine and still dual boot and use Snow Leopard as needed.
Any Mac Pro can now use 1000MB/sec SSD PCIe blade to boot from and/or for scratch and editing to help improve work flow.
SSD Blade Drive for "Classic" Mac Pro

Does Apple provide any certification for Mobile Application testing (iOS)

Does Apple provide any certification for Mobile Application testing (iOS)
Kindly share the details of any Mobile Application testing certification provided by Apple.

I'm not aware of any testing done by Apple except as part of the app approval process:
https://developer.apple.com/appstore/resources/approval/index.html
If you have questions about the review process, though, you can contact Apple via the contact links on that page.
Regards.

HT204365 Hi I wonder if you could please assist me. I tried the online 'contact us" I chose my iPad - but when I need to chose the second part - it does not give me any options - hence I cannot go further? My kindle does not want to open on my iPad.

Hi
I wonder if you could please assist me. I tried the online 'contact us" I
chose my iPad - but when I need to chose the second part - it does not give
me any options - hence I cannot go further?
My kindle does not want to open on my iPad. When I touch it - a grey screen
with kindle written in the middle appear for a few seconds. Then goes away.
I have restarted the iPad - still the same? What else can I do?
Thanks
Maryna

Judging by the reviews of the current version of the Kindle app you aren't the only one haveing problems with it - it looks like Amazon need to fix something with the app.
Have you tried closing the Kindle app via the iPad's multitasking bar and seeing if it works when you re-open it ? Double-click the home button to open the taskbar, and then swipe or drag the Kindle app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
You could also try deleting the app and redownloading it via the Purchased tab in the App Store app on it (you will then need to redownload your books in the app, assuming that it opens).

HT1848 What if when you go to the "file menu" and scroll to devices, nothing comes up highlighted? It does not allow you to click any of the options, however they are there.

what if when you go to the "file menu" and scroll to devices, nothing comes up highlighted? It does not allow you to click any of the options, however they are there.

I am syncing my iphone to my iTunes account and then I do a backup and also making sure all updates are current. Then by going to the my phone and then going to the right and selecting the restore my iphone.
Here is a picture of what I get

Does the Airport extreme provide any sort of usage reporting? Either per user or aggregate usage of the broadband port

Does the Airport extreme provide any sort of usage reporting? Either per user or aggregate usage of the broadband port

No. You may be able to retrieve that information from your ISP.

Does Weblogic Provides any in built utility for server side browser detection

          Hi
          Does Weblogic Provides any in built utility or package for server side browser
          detection i.e. to know the browser details
          of the client with the first request.
          One such available product is BrowserHawk(http://www.cyscape.com).
          any thing similar to this available?
          Thanks in advance
          Mrutyunjay


Hey Mohammed,
          yes, you could use just wl server to do file uploading. in your html client
          code, you need to specify the type of the data that you are sending as
          follows:
          <form action="UploadTestServlet" enctype="multipart/form-data" method=POST>
          File: <input type=file name=file><br>
          <input type=submit>
          </form>
          This will send your file to be processed by the UploadTestServlet. You need to
          code UploadTestServlet yourself to parse and extract useful data. check out
          www.servlets.com for a utility class that does just that
          Winston
          Mohammed Ali Usmani wrote:
          > Hi to All;
          >
          > I want to know if I can use weblogic (webserver) for file uploading from
          > client browser without using any ftp server.
          > Do I have to use some special code (may be in my servlet/html page) for
          > handling this. I mean that do I have to provide the implementation of RFC
          > 1867 by myself at server side?
          >
          > Or it is just merly a browser support? It doesn't effect the webserver at
          > all?
          >
          > Thanks

Thw www Address that Support told me to put in the Nav bar (chrome://pippki/content/resetpassword.xul) takes me somewhere that doesnt have any of the options Support says it does. I need to reset my master password as I have forgotten it, HELP

The www Address that Support told me to put in the Nav. bar (chrome://pippki/content/resetpassword.xul) takes me somewhere that doesn't have any of the options Support says it does. I need to reset my master password as I have forgotten it, HELP

If the usual method does not work, you can also do this manually.
# Open your profile folder, for details of how to find it see https://support.mozilla.com/kb/Profiles
# Close Firefox
# In the profile folder delete key3.db, signons.sqlite, and if they exist signons.txt, signons2.txt and signons3.txt
That will delete all passwords and remove the master password.

Does UCM 11g provide any default skinning options?

Similar Messages

Maybe you are looking for