Does updating to mountain lion wipe out your current
If I upgrade to Mountain Lion Software will it delete all of my saved documents and my word, excel, etc?
No, it won't. Back them up anyway, and see below.
Microsoft Office 2004 and any other PowerPC software you may have can't be run in Lion or Mountain Lion.
(70011)
Similar Messages
-
Will updating to mountain lion wipe my computer
Will updating my software delete all my data on the computer?
Don't. Install clean OS on another drive instead, you've got four drive bays use 'em.
Then use Setup Assistant and leave the OLD system AS IS as backup and dual boot until you are sure, that will be your "what if ML doesn't work" for you.
Never to me a good idea to "update." Clone first if you must (don't rely on TimeMachine, rely on a working bootable backup instead). -
Problems when updating to mountain lion?
I am currently at OSX 10.6.8. What kind of problems can I expect when updating to Mountain Lion?
If your Mac is capable of running Mountain Lion, has at least 4GB of RAM, and a decent amount of available free space, the update should go quite smoothly for the average user.
-
I just bought my mac book pro and updated to mountain lion and I don't know why it is taking around 1minutes and 10sec to boot up,does anybody have any idea? and also how can I make my laptop boot up faster?thank you in advance
Call Apple Care.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. -
My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use. -
Hello everyone I need help! Why i cant Update to Mountain Lion if Im gonna try to update my Macbook Pro with Mac OS X 2.3 GHz Intel Core i5. It always says "Your Software is up to date" which is only Mac Os X ver. 10.7.5
Not sure what exactly you did (or not), but it looks as if you should attempt doing it all again, only this time all right and by the book. Many millions have done so, and sure it'll work for you as well.
If you've indeed purchased ML already, you'll find it exactly there in the App Store: under Purchases. -
Volume not working after update to mountain lion? cannot figure out how to fix
update to mountain lion today, now cannot listen to itunes, no volume on facetime etc . . . cannot figure out what problem is
ThanksHi Al,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back. -
Ever since I updated to Mountain Lion, I have blacked out text boxes. Can anyone help me? Thanx
Where? Which apps? Details missing.
-
The latest update for Mountain Lion OS X 10.8.3 does not update. Keeps asking for Restart but no update.
Yup, I'm experiencing the exact same thing.
I (and many others) are experiencing the same or similar issues with the 10.8.3 update.
I've sent an response to Apple but have not yet received anything back (yet). -
Does anyone know how to update OSX Mountain Lion 10.8.1. to 10.8.2. on a late 2012 Mac mini. All I get are 'not compatible' messages even using supplementary updates etc?
It appears that many of the problems with the HDMI are the "monitors" that are being used. Samsung and Vizeo both DO NOT support a computer input on HDMI only VGA. There probably are others, manuals must be read to confirm compatability.
I strongly believe that the reason the 10.8.2 update was pulled is due to the fact (it happened to me) that the new Disk Utility creates a Fusion drive if aftermarket SSDs are added to the system. I think Apple wants this propriatary Fusion Drive to be something you buy from them not a "homebrew" for lots less money. -
Does anyone know when os x mountain lion comes out exactly
does anyone know when os x mountain lion comes out exactly
Best guesses I've heard are between 19 July and 26th.
Since Lion came out on the 20th last year, I'm betting it won't be before that. It would be the first ever major OS release that hadn't even made it to a full year. Somehow, can't see Apple wanting that accolade. -
I have found, in the past few days, since the latest update to Mountain Lion, if the Mac is put to sleep, there is no sound available when it wakes. I have to re-start to get sound back. Is this general??
Please read this whole message before doing anything.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
I just downloaded the newest update for mountain lion. After downloading any restarting for installation, I got a message stating that the update cannot be installed due to an error. Yet when I check I have version 10..8.3 and safari version 6.0.3, which the update was for. Does this mean that the update is iinstalled and the message was incorrect?
Brian Gallagher wrote:
I just bought the Imac on Monday, which was placed on the shelf on Saturday. Its now Thursday and I have to update the machine. Heck I haven't even bought the printer or the new desk for all this stuff....ha ha.
Good timing! Oh well, at least you shouldn't have to update again for a while. It will be nice kickstarting your Mac with the very latest System Update knowing any hiccups from 10.8.2 would have been ironed out if they were going to affect your workflow at all.
Cheers and Happy Computing
Pete -
I am running Mountain Lion (10.8.4) currently. I rolled back to Mountain Lion from Mavericks back in October 2013 because I was having problems with it. However, I've heard there are improvements to Maverick since my initial install. My question is will I need to update from Mountain Lion to Maverick in order to update to Yosemite this fall? Thanks in advance.
jdeclanflynn wrote:
...My question is will I need to update from Mountain Lion to Maverick in order to update to Yosemite this fall? Thanks in advance.
If your goal is to install Yosemite upon its release, I doubt you will need to do it from Mavericks.
If Mountain Lion does not have features you need and Yosemite will, then, as WZZZ suggest, give Yosemite a chance to have any bugs worked out first.
If your concern is security, Mavericks is the current OS but Apple is still providing Security Updates for Lion, so Mountain Lion should still be good to go for a while yet. -
My wifi network is 802.11n but there are times changing for 802.11g, and have to restart ... after the update for Mountain Lion... Help!!!
Several problems with Mountain Lion, APP STORE (login/logout error), WIFI(802.11n for 802.11g), MAIL (horrible)... Apple, what is happening?Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Maybe you are looking for
-
Adobe applications don't appear under "open with"
When I control-click an AI file on my desktop, or some graphic, I do not see any Adobe applications like Illustrator and Photoshop as available options UNLESS those applications are already open. I end up having to dig deep under "Other" everytime to
-
How to Search strings with and without quotes
Hello, I need to search a string with quote and without quote the same way Ex: Wendy's If user enters wendys without ' also need to return all the Wendy's..! I appreciate any help...! Thanks RG
-
N73ME Themes Problem after upgrading to new firmwa...
Hi All, I bought an N73 Music Edition when it was in 3.07 firmware version. Now I have upgraded it using NSU to 4.07. Currently I am facing a problem when trying to switch to some of the themes I installed before upgrade. These themes are not display
-
Please Help!! Acrobat Autosave File Recovery
I have a project that I am working on in Acrobat and have the Autosave function set to 5 min. I don't know what happened, but Acrobat just blinked and went away. I have tried everything that I can find in the help file and on the web, but I cannot se
-
I can't get the highlight, underline, and strikeout features of Adobe Reader to work on my iPad 3. The marker, notes, and signature functions work just fine. I deleted the app and re-installed it, but that didn't help. Any suggestions?