Does US - Origin ipad3 electric cabal support 220 volts?

does US - Origin ipad3 electric cabal support 220 volts?

You did not annoy me.
Don't know about 4G LTE compatibility but see this -> http://www.albawaba.com/business/ipad-incompatible-middle-east-4g-418853

Similar Messages

Does the original Xserve Raid (2003) support 750Gb drives.

Is the latest firmware compatible with the original Xserve Raid, thus supporting 750Gb discs?
Thanks in advance.

Hi
Short answer is yes. Refer to this Article:
http://support.apple.com/kb/HT1219
Tony

Does the original ipod touch not support apps or books?

i've restarted, checked for updates, and restored, yet i can't get my apps or books onto my device. it's a first generation, but i know nothing about the operating system. any suggestions?

You need to be running iOS 2 or later in order to install Apps. Since you are only running iOS 1.x you likely have a 1G iPod Touch. See this article about purchasing the 3.1 update.
http://support.apple.com/kb/HT2052
B-rock

HT4060 Does the Ipad charge with 110 and 220 volts

Can I use both 220V and 110V to charge the Ipad 2, I am in Europe, and need to charge my Ipad, will it charge using 220 which is what is available in Europe?
Thanks

Thanks,
Another question I have is. I have a DELL ELitebook 8530W and when I try to charge my IPAD with the USB Port, it does not charge which I read in the help section that it because it is not a strong enough USB Port. I would think this laptop would have a strong enough USB port.
Any Suggestions!
John

International 110 and 220 volts

If I use the cable with the optional wall charger, does the iPhone accept both 110 and 220 volts (like most laptops)?

On your charger there is a label in veeeeeeeery small letters " input 100-240V".
You will be safe in this range.

Does the new IPAD3 support the 3G in Egypt?

does the new IPAD3 support the 3G in Egypt?

The New iPad supports 3G world-wide wherever there is a local provider of iPad data plans and iPad micro sim cards. Read the specifications. http://www.apple.com/ipad/specs/
So the question really is, are there 3G providers in Egypt who support the iPad?

SOLVED - BIOS UPDATE "SYSTEM DOES NOT CONTAIN the NECESSARY WMI SUPPORT for this VERSION of HPQflash

If you get infamous error when updating HP Portables (laptops/notebooks/ netbooks) BIOS within Windows:
"SYSTEM DOES NOT CONTAIN THE NECESSARY WMI SUPPORT FOR THIS VERSION OF HPQFLASH":
I am posting a solution found for own business laptop (HP 8540W & 8760W) so WebSearch engines index/register it in a few days - future sufferers come here and get a SOLUTION, finally. Disreagrd previous "experts" advises, they don't work 100% & pity on TechSupport folks who get HP paychecks yet don't know products their co. designs/manufactures (on deep Technical level):
Below is a SOLUTION (WORKING) !
Go into Services (Run "services.msc" or get there thru ControlPanel-->AdminTools-->), find following 2 services ==> make sure they're running, chances are they're NOT (as in my case I keep them disabled unless need running):
1) "HP Software Framework"
2) "HP Service" [no typo - a real plain name]
If not running, set Properties-->Manual and click "Start", make sure both are running.
Rerun BIOS updater, choose option for "Within Windows" or something to that effect (using HPQ/ROMpaq updater), rather than "create USB BootDisk on Key", this time it should work without the hassle of a BootDisk creation.
Should work from within Windows environment.
Notes:
a) Likely only one (1) service is responsible - namely "HP Software Framework" for HPQ Updater to fail, but doesn't hurt to reenable/restart both services.
I in fact am responding to other customers who elect to Update BIOS within Windows, perhaps oldfashioned but to me Boot Updater is more natural & always works regardless of WMI Support.
b) After done, don't forget:
*) Recheck BIOS settings - update may've added new and/or changed old, so rescan tobe sure.
**) Go BACK into Windows-->Services.msc & redisable both aforementioned Services if were originally disabled; or you're a computer Pro, you know what you're doing & like me keep all HP services disabled. The ones we got on EliteBook 8760W are pests consuming system resources, you just enable "Software Framework" when occasional issues emerge with HP softupdate (typically no issues) & redisable after use, rest of services are bloatware - some attempt to overrun Windows Wireless console, some seekout HP Networked printers (Ethernet, Wireless, but not USB), some do this & that - I study/know which one does what and decided to disable all. This is called a "minimalist" philosophy & turns your machine into a fast beast, I recently sold a very obsolete 4-year laptop which however handles 3DMCAD & complex designs/simulations, better new machines out fo a store, as new machines are loaded w/bloatware chocking down resources.
BUT nobody is requiring you to disable anything though.
The solution merely states the fact:
These 2 (or 1) services when not running halt BIOS Update "within Windows" (you can still run "BootDisk option", however, if preferred).
Simply restartung them solves your problem. Usually
Ya'll have a good day and enjoy!
===========
BELOW ARE IMPORTANT WARNINGS:
1) IF YOUR BIOS UPDATE STILL FAILS, SOME OTHER PIECE IN WMI SUPPORT IS MISSING - IN MY CASE WAS THESE 2 SERVICES, BUT THERE'S REMOTE POSSIBILITY SOMETHING ELSE MIGHT BLOCK UPDATER. DON'T WASTE TIME & CHOOSE "USB/BootDisk" options instead
2) Once BIOS updater does its job, will ask to auto-restart - let it go on & complete, it will self-shutdown (click "Next" to skip 60-second timer), then do NOT turn it on manually!, wait - it'll turn on by itself in 15 seconds, let it boot into Windows, you're done!
3) WARNING: close other apps before proceeding, be 100% sure your ACpower won't be interrupted or better yet - make sure battery is in/charged (so if ACpower accidentally disconnects, you're autoswitched onto battery) b/c power loss may result in severe damage to internal hardware. In the old days it'd result in fatal damage, these days powerloss would still result in a major repair (ROM chip corruption).
So to summarize: those 2 services I specified, are often responsible for whether HPQ/ROMpaq will or won't run.
Other causes possible, but I've not witnessed; and if so - choose BootDisk option.
===
Stan M. Starinski, MSEE.

Hello Ceramics.
Your ProBook is an Enterprise model. It would be a good idea to also post your question to the HP Business Boards as those forums deal specifically with that kind of product. Here is a link.
Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

HT1414 after downloading ios 6, i want to restore my iphone 4. does the original software download when restoring the phone

after downloading ios 6, i want to restore my iphone 4. does the original software download when restoring the phone

Downgrading of any version of iOS isn't supported by Apple. If you search the web, you'll find instructions that may work, but you're on your own should any problems arise. For many people it goes without problems, but for some it's reportedly bricked their devices.
If you haven't done so already, try restoring your iPhone as a new device, not from a backup, and run just with the included apps for a bit and see how it performs. Cache corruption or incompatible software can cause performance and stability issues. No guarantees, but it's worth a try to at least try to identify what's causing the problems, iOS 6 itself or something you have loaded.
Regards.

Does Mini DisplayPort to VGA adapter support DDC/CI?

I have a Mac Pro and a MacBook5,1.
Mac Pro is attached to a BenQ monitor which supports DDC/CI communication.
With a capable software I'm able to set brightness and contrast of the monitor without using monitor's OSD (thanks to DDC/CI communication).
If I attach the same monitor to my MacBook5,1 with VGA cable through a Mini DisplayPort to VGA adapter, DDC/CI stops working.
I'm no more able to set brightness and contrast and the app reports that monitor isn't DDC/CI capable.
I'm sure its not an issue related to the app that I'm using to set brightness and contrast. It detects correctly both of the monitor (the internal and the external one) and I'm sure that I'm sending DDC/CI commands to the external monitor and not to the internal one.
So, does Mini DisplayPort to VGA adapter support DDC/CI, and therefore passthrough its signal?
Or is it a problem of MacBook and its Mini DisplayPort which does not support DDC/CI at all? I don't think so.
I hope you can help me.
Regards
Andrea

No. Unlike DVI, which in the DVI-I configuration has both digital and analog pinouts, DisplayPort (and mini-DisplayPort) are purely digital. Mini-DP to DVI then DVI to VGA will not work. If you look carefully at the Apple Mini-DisplayPort to DVI adapter, you'll notice it's a DVI-D connector - digital pins only.
The Apple mini-DisplayPort to VGA adapter contains a digital-to-analog converter.
So, you'll have to choose. If you want VGA, get Apple's mini-DisplayPort to VGA adapter.

It seems like I just missed the interval for the hard disk replacement program. I purchased in March 2009 a 24 inch Intel iMac . How much does it cost to have apple support at an Apple Store replace a hard drive?

It seems like I just missed the interval for the hard disk replacement program. I purchased in March 2009 a 24 inch Intel iMac . How much does it cost to have apple support at an Apple Store replace a hard drive?

My hard drive continually has the floating beach ball and will take massive time to fulfill a request. And then will not boot up...so then I have to do a restore and rebuild hard drive from a past saved time machine version. Works for a little bit...then the floating beachball comes more and more...until it will not boot up again. So then I restore from a previous time machine saved version....and again it works for a day or so ... until it happens again. Now it's happening faster and faster...so I think my hard drive is dying.

Does OS Lion 10.7.5 support Airplay mirror of Apple TV 3? I can't find the option in Setting Display on my mid 2012 MacBook Pro.

Does OS Lion 10.7.5 support Airplay mirror of Apple TV 3? I can't find the option in Setting>Display on my mid 2012 MacBook Pro.
I've rebooted all 3 devices, still does not work. Both Apple TV and MBP are on the same wifi. And the Apple TV AirPlay option is on. Can someone help? Thank you.

About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs that do not support Airplay and mirroring.
Another solution is the Air Parrot.

Does Adobe Flex 4.6 SDK supports multithreading?

Hi,
As we are using Adobe Flex 4.6 sdk for our vmware vcenter plug-in development. we need to handle the situations like updating the data in multiple panels and portlets of a dashboard simultaneously.
So we are thinking to implement this using multithreading concept.
I am hearing flex doesn't support multi-threading, some workers constructors will give flavor of the multi-threading in flex.
It will be helpful if you provide some information about
1. Does Adobe Flex 4.6 SDK supports multithreading? If so how to implement?
2. How to use Workers in flex and what are the limitations?
Thanks and Regards,
Sravan Kumar.

https://forums.adobe.com/message/4562551

Does USD NACHA CCD Plus Format support one single payment with one vendor?

Hi,
We are implementing USD NACHA CCD Plus Format file for my customer.
Have the following query:
Does USD NACHA CCD Plus Format support one single payment with one vendor and another single payment with
different vendor in single file or will it generate two files for two payments or will it support single payment only.
Can anyone help us in this regard.
Thanks,Venkat.

I have created one invoice1 with one vendor and another invoice 2 with
different vendor processed the PPR using USD NACHA CCD Plus Format .
Both two payments came single file.
But we know that USD NACHA CCD Plus Format support Single Payment only.
Can anyone help us in this regard.
Thanks,Venkat

Does adobe reader for android/ios support digital signature?

does adobe reader for android/ios support digital signature?

when to support digital signature in adobe reader for android/ios?

Does Weblogic server 9.2 provide support for CRL checking

Does Weblogic server 9.2 provide support for CRL checking?

No, but you can create a custom CertPath provider for your own implementation.
Mike
Weblogic/J2EE Security Blog: http://monduke.com

Does US - Origin ipad3 electric cabal support 220 volts?

Similar Messages

Maybe you are looking for