Does User Messaging Service come by default in SOA Suite?

Yes, UMS is a feature available as part of SOA suite installation.
You should be able to see the UMS related configuration features in the EM Console.
Please visit the following link for more information.
Configuring Oracle User Messaging Service
Thanks,
Wajid
Middleware Integration - YouTube

Similar Messages

Oracle User Messaging Service unable to connect to Mail server through SSL

Hi,
I have a SOA server setup with User Messaging Service, with email driver installed. I set it up to connect to an SMTP server over SSL.
Using the user messaging sample app from samplecode.oracle.com, I encountered the following error:
javax.mail.MessagingException: Exception reading response; nested exception is: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
After doing some research, I copied the cert from the Mail server and put in in the JDK keystore (jdk\jre\lib\security\cacert) using keytool -importcert command. Then I did configure the SOA server to use that keystore. However I still encountered the above mentioned exception.
Anyone has encountered and solve the problem?
Appreciate any pointers :)
yee thian

Hi,
SAP support suggested to check the following notes:
827958 - Javascript Errors in IC WebClient, Messaging does not work
871851 and 872720 - JRE version
828884 - SAM (Simple ABAP messaging)
844929
924443
927566
927567
Regards,
Bruno Mikio

Trying to integrate with User Messaging Service adapter in SOA suite.Can it be possible through an JMS interface.

Trying to integrate with User Messaging Service adapter in SOA suite. Can it be possible through an JMS interface.
I have an JMS backend integrated to Oracle B2B. Is it possible to send an email protocol message using JMS interface to B2B where User messaging Service has been implemented. The adapters required for UMS have been deployed and the sdpmessaging jar files also have been added to the classpath. The only problem i face is i dont have an BPEL system to integrate where as in the forums it has been mentioned how to post a message using BPEL.
Please let me know if there is a way to integrate the adapter with JMS interface.
Thanks in advance
Deepak

If I remember correct, to use JCA adapter with SOA stack requires that adapter implement some Oracle API.
The Adapter SDK is a light-weight tool kit that enables rapid implementation and deployment --- http://www.oracle.com/technology/products/integration/adapters/pdf/DS_OracleASAdapter.pdf
http://download.oracle.com/docs/cd/B16981_04/current/acrobat/cct115dg.pdf
Mostly you will have to wrap your jca adapter to make it available in SOA suite/stack.
Other option is that you adapter provider would have given CCI interface or some custom interface which can be used for invoking adapter end-points.
Manoj

Oracle User Messaging Service

Can we use more than one SMTP user for configuring notifications in User Messaging services?

Hi grehard,
I am getting the below error under message status. Can you please suggest me the solution ?
Message ID (Recipient)     a792deb5c0a805f100972b1631596902 (USER:AIAIntegrationAdmin)
Operation     Send
Overall Status     Failed
Status Code     ENGINE_PROCESSING_FAILURE
Status Message     User could not be resolved to device addresses. Please see the log file for details.
Timestamp     Dec 17, 2012 12:05:18 PM IST
Gateway Message ID
Sender
Recipient     USER:AIAIntegrationAdmin
Driver Instance Name
Engine     /Farm_base_domain/base_domain/soa_server1/usermessagingserver
Application Name     soa-infra
Application Instance Name

Programmatically setting UserPrefs for User Messaging Service

Hi,
do anyone knows or have tried to set UserPrefs, for User Messaging Service in SOA Suite, instead of using the web interface?
I have tried using the API provided, but with no success.
Appreciate any pointers and hints.
Thank you
yee thian

I solved this... when u r saving from Em it is not saving ur configuration. so go to driverconfig.xml file at below location
Manully enter all the configuration values and restart the server.
C:\Oracle\Middleware\user_projects\domains\ofmw_base_domain\config\fmwconfig\servers\bam_server1\applications\usermessagingdriver-email\configuration

How does user profile service work if i want to use SharePoint Hybrid

I plan to use sharepoint hybrid
I want to know how does the user profile service work
is it going to use two services ? one is in online ,one is on local ?
actually i want to use one user profile service both online and onpremises can use

hookedonlerman wrote:
but will that replace the use of using up data? (wifi & 3G)
It sounds as if you don't really understand what "using data" means. Data is not something different from WiFi and 3G, it's something sent over WiFi and 3G. Think of data as water and WiFi and 3G as types of pipes. Some apps need to send and receive data to work. That data can be sent or received in different ways. It can be sent over WiFi or 3G. Both official iPhone carriers in the U.S. have metered data plans. It's sounds as if you're talking about AT&T's 200 mb data plan. WiFi is not provided by your cellular carrier. You can have WiFi from your Internet Service Provider at home or you can access free WiFi at places like McDonalds or Starbucks or paid WiFi at places like airports.
If you have WiFi turned on on your phone and WiFi is available, the phone will default to WiFi. WiFi is faster than 3G and generally not metered, and is sometimes even free. If you are out of range of WiFi, you would be using 3G to send and receive your data. With a metered plan, you need to keep an eye on how much you are using because if you go over your allowance, you will be charged additional fees.

WWhy does User Account Control come upwhen I click on Firefox logo?

I have Windows 7. For the past 2 weeks when I go to Firefox on my window the User Account Control comes up and asks "Do you want to allow the following program to make changes to this computer?"
I say yes. This happens every time I click on to Firefox logo. How can I avoid this fom happening?

Hi zamler, sorry for the unrelated reply.
I'm not sure what causes that...
If you right-click the icon > Properties > Compatibility tab, can you make sure that "Run this program as an administrator" is not checked?

Is service registry a part of SOA suite?

Hi,
It is a bit unclear to me if service registry is a part of SOA Suite.
According to the SOA suite homepage (http://www.oracle.com/technologies/soa/soa-suite.html) it is not a SOA suite component.
However it is mentioned in the description of this SOA Suite forum(http://forums.oracle.com/forums/category.jspa?categoryID=13) and also on the homepage of SOA suite installation.
There are also some contradicting posts in this forum.
Can anyone clarify this issue?
TIA

Hi,
The UDDI registry is part of the SOA architecture. It is however a separate download and installation in respect to the Oracle SOA Suite package.
Kind regards,
H

Tracking notifications sent from BPM process - User Messaging Service

Hi,
I have a requirement to track the notifications sent from all the BPM processes in one place.
My Requirement is to (1. Check the status, sender, receiver of the notification, 2. view the actual content of the notification, 3. Resend the notification)
Few options I have explored are below. Need experts advice please
1. Enterprise Manager gives the option to check each notification status and option to resend the message. I have two problems with this option
     a) It does not solve my requirement of 'viewing the content of the message'. It does not show what is the actual message content. though we can see other notification details like sender, receiver etc...
     b) users does not want to go to enterprise manager. They need a separate UI based on ADF.
2. Tried to build a UI based on UMS EJB API and UMS WebService API. Both the APIs provide the operations to check the status of the message. But there is no API that returns the actual content of the message
     a) It does not solve my requirement of 'viewing the content of the message'. Both the APIs does not expose any operation to retrieve the message/message content. I see AccessPoint as one options but, In my      case, Application need to track the messages sent to all the users, not particular address.
     b) There is no operation exposed to resend the message. Not sure how it is being done through enterprise manager.
3. Tried by directly accessing the ORASDPM schema of UMS to fetch the content of the message. found that the content of the message is stored in 'MESSAGE_OBJECT' Blob column of 'MESSAGE' table.
     Built an ADF application based on ORASDPM schema. Following issues:
     a) could not parse the BLOB column data. Tried using a blob converter which converts the stream to text. but the conversion is not happening properly.
     b) Need to figure out how to resend the message.
My environment: Oracle 11g , JDeveloper 11g Release 1 11.1.1.6.0
Thanks in Advance.

Hi,
try this question on a BPM forum please.
Frank

Getting the message content in User Messaging Service

Hi,
I have a specific requirement in my project to get the message content of any message sent by ums, given a ums message id. Is there any api in UMS or anyother way to get this details.
Thanks in Advance,
Sudan

Just wanted to give kudos for the example you have below ... i was in the same situation and was madly looking for a reference like the one below ...
Thanks,
M.

User Messaging Service Configuration Lost on Restart

I am configuring email for SOA and BAM. For SOA everything goes fine but we are facing issue in BAM.
We are configuring email in bam(entering port, address etc) and saving that changes. but when we do restart the server all the configuration got erased. only deafult values left. this is the case with BAM only.
Any idea why its happening?

I solved this... when u r saving from Em it is not saving ur configuration. so go to driverconfig.xml file at below location
Manully enter all the configuration values and restart the server.
C:\Oracle\Middleware\user_projects\domains\ofmw_base_domain\config\fmwconfig\servers\bam_server1\applications\usermessagingdriver-email\configuration

How do I invoke decision service of business rules in soa suite 11g?

How do i invoke the decision service of my business rules in SOA 11g.
I have an invoke activity in my bpel process which invokes my decision service from the dictionary BUT
it fails saying that the "name" attribute (NCNAME type) has invalid value while calling the method 'callFunctionStateful'/'callFunctionStateful' !!
What value do I pass in that attribute? Please help.
Input:
<input>
<callFunctionStateful_InputVariable>
<part name="payload">
<callFunctionStateful name="">
<parameterList>
<customerdetails>
<name>susmit</name>
<address>kolkata</address>
<sex>male</sex>
<cellnumber>54355</cellnumber>
</customerdetails>
</parameterList>
</callFunctionStateful>
</part>
</callFunctionStateful_InputVariable>
</input>
Fault:
<bpelFault><faultType> <message>0</message></faultType><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>oracle.fabric.common.FabricInvocationException: Schema validation failed for message part payload. Please ensure at the message sender level that the data sent is schema compliant.</summary></part><part name="detail"><detail>Invalid value '' for attribute: 'name'</detail></part><part name="code"><code>null</code></part></remoteFault></bpelFault>

Provide the name of the Decision Service as specified in the .decs file under the tag <decisionService name="........".
Regards
Albin I

Reading Message from Foreign JMS Queue in SOA Suite 11g.

Hi,
I am trying to read a JMS message that has been put into a JMS Queue on a remote weblogic Server.
The steps that I know is that I need to create a foreign JMS Server and then probably use JMS Adapter to subscribe to the message that is lying in the remote queue.
Has anybody been able to achieve this kind of scenario working for a remote JMS queue? Also, is this supported by JMS Adapter in SOA11g?
Any help will be appreciated.
Regards,
Varun Maheshwari

Hi Atheek1,
Thanks for your reply.
The confusion that is pondering me is that do I need to create a Foreign JMS Server or should I create a JMS adapter and override the properties.
I have tried the steps for creating a Foreign Server from the below link
Unable to access remote JMS Queue through JMS Adapter
But I am not able to find the Foreign Server created and any connection factories and Destinations related to foreign Server in my JMS Destination while configuring JMS Adapter.
I am not sure how to do step2 as entailed by you.
Could you please explain me in little detail on how to do this or redirect me to some blog or forum which will be really helpful.
Cheers,
Varun

Multi Channel Messaging service Configuring, Testing using Simulator

Hi
I am working on soa project to implement human workflow implementation like sms, voice additional to email service. Can any one guide me to the simulator to be used and configuration to be set.

Please refer section "24.6 Troubleshooting Oracle User Messaging Service" at -
http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10226/ns_config.htm
Possible cause -
The UMS Driver for the appropriate channel is configured with a specific list of SenderAddresses, and the message sent by the application has set a non-matching Sender Address.
Note: UMS Server matches the outbound message's sender address, if set, against the available drivers' SenderAddresses to find a matching driver to use for delivering the message. If a driver has set one or more SenderAddresses, then the UMS Server only sends messages with the matching sender address to it.Solutions -
1) Check the following settings in the appropriate UMS Driver using Oracle Fusion Middleware Control:
SenderAddresses
Note: The format for SenderAddresses is a comma-delimited list of <DeliveryType>:<Address>.
For example:
EMAIL:[email protected], EMAIL:[email protected]
2) Leave this property blank, if you want this driver to service outbound messages for all sender addresses for this channel (delivery type).
3) If there are multiple driver instances deployed for the same channel (delivery type) with different configurations, use the SenderAddresses to differentiate the driver instances. For example, one instance can be set with a specific value in SenderAddresses to only service outbound messages with that matching sender address, while the other instance can keep the SenderAddresses blank in order to service all outbound messages that do not specify any sender address or one that does not match that of the first driver instance.
4) SenderAddresses that are configured with the incorrect syntax (such as missing <DeliveryType>:) are ignored by the UMS Server for the purpose of driver selection.Regards,
Anuj

Integration Of BPM with SMS & Instance Messaging services

is it possible to integrate Oracle BPM with SMS & Instance messaging services? If yes, how?

BPM 11g can be configured to use SMS & IM for notifications using the User Messaging Service.
http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10224/partpage_vii.htm#BCIHAJJI
http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10224/bp_hwfmodel.htm#BABICIAH
If you want interactive user messaging and collaboration, then the WebCenter based Process Spaces application can provide this.
There was a recent webcast on Social BPM, which may be helpful - you can view it on demand here:
http://event.on24.com/r.htm?e=207713&s=1&k=CF1343DD07037B7BBE0C5AD09F335FC3&partnerref=fwp

Does User Messaging Service come by default in SOA Suite?

Similar Messages

Maybe you are looking for