Does version 12 support producing video clip with AMR audio codec?
From some documents i used as reference to proceude some videos for my phone Premiere Elements 8 can produce video clips with AMR audio codec. I bought today the Premiere elements 12 but I can not find a way to set AMR audio codec for my video clip. Only AAC audio codec seems available. Is it possible to add AMR codec to 12 version?
Neurona17
Adobe typically supports only current version, and, if you purchased from it, is strict on "within 30 days of purchase": for money back on that current version purchase. I do not believe such a thing as a "change the license for other earlier release such as 8 or 9" exists at Adobe. But, you could ask. If you wish to purchase one of those earlier versions that supports AMR export, you might still find some online.
Is the before import conversion of AMR to WAV a viable alternative?
You wrote
Unfortunately so far I have not been able to generate any useful video clip for my system with this 12 version.
Is this in regard to the AMR requirement or to any video without the AMR audio?
Online I have seen that there is a download for the AMR audio codec. Does your system now show that you have such a codec installed on your computer. If not, I am not sure if download of this codec would place it in the Premiere Elements Publish+Share export settings choices, similar to import of some .avi video codecs. (Sometimes 3rd party codecs can create problem, so proceed with caution if you pursue that AMR audio codec idea.
Please update us on your progress when you get a chance.
Thanks.
ATR
Similar Messages
-
Sync multiple video clips with one audio track
I'm an FCPX noob, trying to sync some clips. I recorded a 1.5 hour concert with a DSLR along with an audio track using a separate digital recorder. I have seven video clips, all in sequence (stopping and restarting the camera because of clip length limitations) and one long audio track in WAV format. The audio track is longer than the combined video clips, and there are some short dead spaces in between the video clips when I turned off/on. Now I'm trying to sync them but when I do, the video clips get stacked together with lots of overlap.
I made a test with 3 minute video and audio clips and had no problem. But when I try to do the whole event, I get a jumbled mess.
I could cut the audio into pieces and sync each piece with its corresponding video, but that seems to defeat the sync process, as well as being a lot of work. And, wouldn't I end up with lots of overlap anyway, since my audio clips would have to be longer than my video clips?
Am I missing an easier way to do this, or a way to arrange things better? I can't imagine the problems with several cameras and several audio tracks; my project is actually pretty simple, since it is very linear.
Any suggestions? Thanks--BobFromIN wrote:
Sorry to take so long getting back to you. Thank you for this advice, but I'm not sure I'm doing it correctly. Is there a way to set the angle on all of the clips at the same time?
Yes. Select all the clips you want in the browser, and then in the inspector fill in the camera angle with the value you want. This can be just about anything, it does not have to be a number. I prefer to name it something meaningful, like "wide" or something. -
JAN 4, 2012
As of the Upgrade to Lion,. 2007 I-Mac - the Email portion, .. DOES NOT allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip .. Now Lion only Export's 1 size, . only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail ???
Between the Issue of the Lion, and Email issues , and the Upgrade of I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge .. 70,000 + photos in the Computer. . and was 40,000 in the I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB or 32 GB Unit . .
No Help . .. so far, .. as a Apple user since 1996 .. I have Never experieanced such frustration ???
( any one have some help if similar experiances ? thank you )JAN 4, 2012
As of the Upgrade to Lion,. 2007 I-Mac - the Email portion, .. DOES NOT allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip .. Now Lion only Export's 1 size, . only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail ???
Between the Issue of the Lion, and Email issues , and the Upgrade of I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge .. 70,000 + photos in the Computer. . and was 40,000 in the I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB or 32 GB Unit . .
No Help . .. so far, .. as a Apple user since 1996 .. I have Never experieanced such frustration ???
( any one have some help if similar experiances ? thank you ) -
I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?
What version of Premiere Elements and on what computer operating system? Elements 13 on Windows 7
What is the brand/model/settings of the camera that recorded these videos? ony PMW 320
When you import them into your Premiere Elements project, what does Premiere Elements Properties for that import give for
the audio description in the way of number of channels? If you open the Audio Meter (Window Menu/Audio Meters) and you play back
the video in the Premiere Elements Editor, how many channels does the Audio Meter display?
I just drag and drop video and when playing back only channel 1 will appear
What is your intended export for this video in terms of audio as well as video compression and formats? MP4
I think you can only use audio if it's recorded on channel 1 or it does not recognize it.
Thanks for the help if possible,Kevin416 873 8374 -
Sound works (songs) on Ipad 2 but sound on videos (example utube) sound does not work. Video plays with no issue.Mute us not checked in general settings. Reboot (off/on) has not helped. Deleted apps and reloaded them. Did not help. Any other suggestions thank you
If you lose sound for games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
when I tried to open document library in Windows explorer view by click 'Open with Explorer', it popped up “Your client does not support opening list with windows explorer”
OS: Windows Server 2008 Enterprise x64
IE: 9.0 32bit
webcient service is runing
HKLM\System\CurrentControlSet\services\WebClient\Parameters and changed the BasicAuthLevel to 2 instead of 1.
Anybody knows how?
Thanks.Did you add your site to trusted site list?
http://sharepoint.stackexchange.com/questions/15098/your-client-does-not-support-opening-this-list-with-windows-explorer
--Cheers -
Your Client Does not Support Opening this list with Windows Explorer on Windows Server 2012 R2
I am trying to open a document library in Internet Explorer 11 on a Windows 2012 R2 server and I am receiving Your Client Does not Support Opening this list with Windows Explorer
Hi,
According to your post, my understanding is that you wanted to open a document library with the Internet Explorer 11 on a Windows 2012 R2 server. But you received the following error message: Your client
does not support opening this list with Windows Explorer.
There can be multiple reasons for it.
So, I recommend you can check with the following steps:
Go to the “Server Manager” of “Administrative Tools” > Enable the “Desktop Experience” feature in your environment.
Go to the “Services” of “Administrative Tools” >
Ensure the “WebClient” service is started.
Ensure that your computer has supported Web browser.
Ensure that Internet Explorer is configured correctly to add
https://*.sharepoint.com to Local intranet site in the “Security Tab” of “Internet Options”.
Ensure that
you have applied the latest updates on the system.
For more information, you can refer to the following articles:
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
http://mcgeeky.blogspot.com/2010/02/your-client-does-not-support-opening.html
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Hi folks -
I've read through some threads regarding "Your client does not support opening this list with windows explorer" and it seems a lot of folks have a lot of solutions throughout the forum posts. Is there anything official or semi-official regarding
this?
I've tried a lot of the fixes including:
checking to see if the WebClient service is on
modifying so-and-so registry (I've since changed them back since they seem to have no effect)
and changing various settings in Internet Options including making sure the site is in the Local intranet zone.
I could live without this functionality but just recently my upload-multiple-files functionality in SharePoint 2010 has also gone away (red x instead of directory UI). I wonder if it's related somehow and could give us a clue.
If it helps I'm using various browsers but of the IE flavor 8 and 9 32-bit as the base for testing this.For SharePoint 2013 (so could apply to 2010 as well), my problem was that I was trying to "Open with Explorer"
something that probably can't be opened with Explorer. In my case, I just wanted to open my team's Shared Documents with Explorer. I found that when I first log into SharePoint and view the page, I'm presented with those Shared Documents, but also other things
as well.
To get "Open with Explorer" to work, I must click "Shared Documents" under the Libraries heading on
the left. Then, all the other stuff (Links, Getting Started, etc.) go away and I'm focused on my team's shared documents. From there, I can go up to the Library Tools section in the ribbon, choose the Library tab in the ribbon, and click Open with Explorer.
Works like a champ on Windows 7 64-bit, running IE 9 32-bit.
Unfortunately that's not what was going on in my case. One obvious way to check is to see if other people or other computers can Open with Explorer. In my case it was just this one machine on my desk that had the issue. -
Hi.
I am getting below error "Your client does not support opening this list with Windows Explorer" while click "Open with Explorer" option in document library.
My system is client machine which is 32 Bit system and
Web Client service is also running and Window 7 PC.
Other SharePoint sites "Open with Explorer" option in document library is working fine but specific site is giving error.
Even it was working fine but not is giving this error.
Please help me on it. Its making frustrations.
Thanks & Regards
Poomani SankaranHi,
According to your post, my understanding is that you got “Your client does not support opening this list with Windows Explorer” error.
Did you enable the both authentication (Windows and FBA) on default zone.
As far as I remember when FBA is enabled on the same zone when Windows is used, it breaks whole client integration.
So it will be better if you will recheck your architecture and will use different zones for Windows and FBA.
There is also another thing to try: use claims based authentication with authentication provider which will work both with Windows and FBA.
What’s more, you can also check with below steps.
Use compatibility mode to check whether it works.
Open IE->Tools->Compatibility View Settings
Add the site into Trusted sites to check whether it works..
Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
In addition, you can also try to enable Basic authentication on the client computer, by setting the BasicAuthLevel registry entry of the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters
For detailed steps, visit the following KB page.
http://support.microsoft.com/kb/841215/en-us
There are some similar threads for your reference.
http://social.msdn.microsoft.com/Forums/en-US/e9a07773-db23-46e9-8d1d-7015cd5aa13b/your-client-does-not-support-opening-this-list-with-windows-explorer?forum=sharepointgeneralprevious
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
I am attempting to connect to a Microsoft Sharepoint library, via the "Actions -> Open in Windows Explorer" option from the Sharepoint page. When I do so, I get the error message "your client does not support opening this list with windows explorer". In short, I am trying to get the "drag and drop" functionality of a Sharepoint library.
I am running Windows 7 64-bit and IE8. The target Sharepoint environment is a MOSS 2007 EE. My Windows "WebClient" service is running, and I have no problem connecting to this exact library via a Windows XP computer running IE8.Verify that the Webclient is started automatically from the Services.msc
Verify that your Portal is in the Intranet local security zone (You can reach it from Your Internet Explorer Browser Security Tag) if not add it to the list
restart the WebClient service if it's work good
If not you have to create a network share to your portal URL directly not your documents library.
Open Windows Explorer or My Computer from the Windows Start Menu.
From the Tools menu, click Map Network Drive…. A new Map Network Drive window opens.
In the Map Network Drive window, choose an available drive letter from the dropdown list located next to the "Drive:" option. Any drives already mapped will have a shared folder name displayed inside the dropdown list, next to the drive letter.
Type the name of the folder to map wich is in this case your SharePoint Portal URL (Don't include the documents libraries)
Click the "Reconnect at login" checkbox if this network drive should be mapped permanently. Otherwise, this drive will un-map when the user logs out of this computer.
If the remote computer that contains the shared folder requires a different username and password to log in, click the "different user name" hyperlink to enter this information.
Click Finish.
I am looking for a suite method :) -
Error: Your client does not support opening this list with Windows Explorer.
I have enabled both authentication (Windows and FBA) on default zone, now when I want to open any document library on windows explorer it showing me an error.
Your client does not support opening this list with Windows Explorer.
Web client service is running on server.
Desktop Experience feature is also enabled on server
Windows explorer is working fine when FBA is disbled on default zone.
Need both authentcation on default zone.Hi,
According to your post, my understanding is that you got “Your client does not support opening this list with Windows Explorer” error.
You can use compatibility mode to check whether it works.
Open IE->Tools->Compatibility View Settings
You can also add the site into Trusted sites.
Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
In addition, you can also try to enable Basic authentication on the client computer, by setting the BasicAuthLevel registry entry of the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters
For detailed steps, visit the following KB page.
http://support.microsoft.com/kb/841215/en-us
There are some similar threads for your reference.
http://social.msdn.microsoft.com/Forums/en-US/e9a07773-db23-46e9-8d1d-7015cd5aa13b/your-client-does-not-support-opening-this-list-with-windows-explorer?forum=sharepointgeneralprevious
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Explorer View - Your client does not support opening this list with Windows Explorer MOSS 2007 '
We recently had a major deployement, after which Explorer View started giving error message.
Before deployement, all was working fine.
Error: Your client does not support opening this list with Windows Explorer
Webclient service is already enabled.
The site has been added to trusted site lists.
All Active-x controls have been enabled.
Browser: Internet Explorer 8 - 32 bit.
Microsoft Office 32 bit is also installed.
Thanx in advance.You could try updating the following registry key on a client PC as a test: HKLM\System\CurrentControlSet\Services\WebClient\Paramenters\AuthForwardServerList to include the URL of your sharpoint site. Add the root site and it might enable this functionality.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem. -
Does quicktime support flash video or flv format
Does quicktime support flash video or flv format
Not natively; it only works if Perian is installed, and then only in Mac OS X 10.8.5 or earlier.
(112327) -
Please help: Why JMF does't play .avi video clip?
The player doesn't play .avi media file, or plays sound only, but it works fine when palying .mpg files, anything I need to pay attention to when using the following code to generate a player to play video clips?
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.swing.*;
import javax.media.*;
public class PlayClip extends JFrame {
//singliton design pattern
private static PlayClip instance;
protected Player player;
private File file= new File ("goal.avi");
private PlayClip () {
instance=null;
initComponents();
public static PlayClip getInstance(){
if (instance==null)
instance=new PlayClip ();
return instance;
private void initComponents() {
JButton OK = new JButton ("OK");
OK.addActionListener (
new ActionListener () {
public void actionPerformed (ActionEvent e) {
player.close ();
instance = null;
dispose();
getContentPane ().add (OK, BorderLayout.NORTH);
setSize (300, 300);
show ();
createPlayer ();
/** Creates new form PlayClip */
private void createPlayer () {
if (file == null) {
return;
removePreviousPlayer ();
try {
//create a new player and add listener
player = Manager.createPlayer (file.toURL () );
player.addControllerListener (new EventHandler () );
player.start (); //start player
catch (Exception e) {
JOptionPane.showMessageDialog (this, "Invalid file or location", "Error loading file", JOptionPane.ERROR_MESSAGE );
System.exit (1);
private void removePreviousPlayer () {
if (player == null )
return;
player.close ();
Component visual = player.getVisualComponent ();
Component control = player.getControlPanelComponent ();
Container c = getContentPane ();
if (visual != null)
c.remove (visual);
if (control !=null)
c.remove (control);
private class EventHandler implements ControllerListener {
public void controllerUpdate (ControllerEvent e) {
if (e instanceof RealizeCompleteEvent ) {
Container c = getContentPane ();
Component visualComponent = player.getVisualComponent ();
if (visualComponent != null)
c.add (visualComponent, BorderLayout.CENTER);
Component controlsComponent = player.getControlPanelComponent ();
if (controlsComponent != null)
c.add (controlsComponent, BorderLayout.SOUTH);
c.doLayout ();
}JDunlop,
thanks for your quick reply to my java.sun.com forum posting! i just got back from vacation, so i didn't get a chance to try your method til now. i pulled your email address off the website to update you on my problem playing an avi file in JMStudio (JMF).
as per your instructions, i downloaded the divx player at www.divx.com and tried to play the avi file. this is the error the divx player gives:
Divx Player 2.1
The file contains unknown video data
The file contains the following type of data:
Video data: FOURCC code "MP42"
You may need to install a new video codec on your computer to watch this video
Some quick questions:
1. Where could I find the "MP42" codec to play my avi file in JMStudio (JMF)? Does java.sun.com have video codecs?
2. You mentioned in your posting "If you don't have the one that was used in the encoding, your out of luck." Does this mean that I need to know how the avi file was originally coded and have the original codec to decode (play) it?
Thanks,
lac410
P.S. If you need more Duke Dollars for your help, I'd be happy to award them to you.
Re: Please help: Why JMF does't play .avi video clip?
Author: JDunlop Jun 5, 2003 5:00 AM
sounds to me like you are missing a video codecs. If you don't have the one that was used in the encoding, your out of luck. Download the player from divx.com, it will tell you which codecs the video needs (if it won't play). You can then search the net for that particular codecs. -
My CS5 program does not support CR2 photo taken with Canon Rebel T5i. Why?
My CS5 program does not support CR2 photo taken with Canon Rebel T5i camera. Why?
If you take a look at the following charts, you will find that both the S110 and the T5i are not supported in CS5, both cameras require photoshop CS6 with a camera raw point upgrade, Photoshop CC or Lightroom 4.3(s110) 4.4(T5).
Camera Raw plug-in Supported cameras
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Photoshop CC indepth : camera raw - Supported cameras for plugin and lightroom
http://www.adobe.com/products/photoshop/extend.html
Camera Raw-compatable Adobe applications
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Maybe you are looking for
-
I have an old PDF, but not the source document. It is in two-column format, that is, two pages of text on one PDF page. I've tried converting to Word in Acrobat Pro XI, but that still preserves the two-column format. It's too big and complex to refor
-
[ANN] Oracle JDeveloper 10g production is now available for download.
It's probably worth a mention in this forum too ;-) In case you haven't notice we have just released Oracle JDeveloper 10g production with a many new features that makes it the ideal Java tools for Oracle Application Server users. Check it out at: ht
-
T-code for repor "Employee Action Report"
Dear Guru, There is a report for getting "employee Actions List". The program name is RPLACTJ0 (standard report) but i dont find the Tcode for this report. I cheked the T.Code through SYSTEM---STATUS. (its saying SA38.) which is ABAP program execu
-
My husband and I have macs, and we both are using the Bridge 5.0 we share a photo drive over our wireless router network I was wondering how the keywords that he assigned to the photos on our newtork can be view on my end . When I do a keyword searc
-
How to access data bound to a subform?
Hello, I have a form with a subform that has data binding. I want to access this data from within the subform. How can I do it? I've tried this.dataNode.getAttribute(), but it doesn't seem to do anything. How can it be done? Thanks, Udi.