Does VI Logger software support M series cards?

Software spec says the software supports E series cards etc. - but does it support newer M series also?

The current version of VI Logger (1.1.1) does not support M-Series boards, it only works with E-Series, 435x and FieldPoint. Since M-Series is obviously the next big thing, I imagine VI Logger will support them soon.

Similar Messages

For using two DAQCARD-AI-16XE-50 's: Does the newer NiDAQ software support only one card?

On an older laptop (probably running Windows 95), the NI software V(?) supported two simultaneous DAQcards. With a new computer running XP and using a more recent version of NiDAQ (6.9.3), only one seems to be supported. If the NiDAQ software is the problem, which version should I install? The system device manager indicates that two cards are in fact installed.

Hi Drum Tech,
This was a problem with the driver assuming a serial number of '0' for both PCMCIA cards. They will be detected correctly in Windows but they will be incorrectly enumerated in Measurement & Automation Explorer. There was a patch fix for NI-DAQ 6.9.2 and this should have been resolved in the latest version of the driver NI-DAQ 7.1.
I would suggest installing the latest version of the driver to fix this issue. Hope that helps. Have a good day.
Ron
Applications Engineering
National Instruments

Does NI DAQmx driver support PCI 6527 Card

In my application i am using PCI 6527 Isolated DIO Card. In the examples from LabVIEW 7.0, i refered the following VIs
1. Write Dig Chan.vi
2. Write Dig Port.vi
using DAQ 7 Driver.
There it gives a list of devices that can run these examples. The list does not contains PCI 6527.
Can I use DAQmx Example VIs with PCI 6527 Card?
Please suggest me what driver to use with 6527 Card (Traditional DAQ or DAQmx).

Hello partners,
I'm using NI DAQmx 9.7 in a machine hosting a Windows 7, but always when I tried to run the application I got this error.:
CAN'T LOCATE THE DRIVER ERROR 10240
Does you have any idea why could I'm facing this problem ? Previously I was using the original driver NI DAQ 7.4.4 (Legacy) in a machine hosting a Windows XP.
Other point perhaps here isn't the best place to start this new post, but I couldn't find how to post a new topic on the site.. My apologies, i'm waiting for any solution or advice
Best Regards
Josias Junior

HT3946 Does the Aperture software support HDR processing. If not is there "add on" software you can get for this process?

Wanting to expand my photography experience and one of the topics that I have been very interested in pursuing is the HDR style photos. Does Aperture support HDR?

No Aperture does not do HDR natively, you will need a plug-in or external app.
There are a number of them out there Hydra, HDR EFX from Nik and Photmatrix are three that spring to mind

Does the 9630 software support Shazam

Hi I am switching to the Tour and I have a registered version of Shazam on my Curve. Will it function on the tour as it just was released with the same software for the Storm?
By that I mean 4.7, I know they have different release versions, but i wonder if it will work if i try to download it.
Message Edited by Frenziiman on 07-14-2009 02:08 PM
"The world is not given to us by our fathers, It is something borrowed from our children."
Solved!
Go to Solution.

You can get it direct from the Shazam website
http://is.gd/IWHh
But not an appworld for the tour.
The URL is case sensitive it seems

Apple offer iTunes software support?

Does Apple offer software support? I cannot find it in the express lane. It asks me to enter a hardware serial?

Thanks for the response but I don't believe this is correct. I clicked on support, and I went back into the express lane. I clicked on the link 'Get iTunes support via request via express lane' and I select iTunes, iTunes Player, 'other iTunes topics' (Because mine is not listed?) and I receive this box popup-
Hardware serial number:
What if I just used iTunes and didn't have a device?

GTX 770 Lightning not registering as a lightning series card

just as the title reads. In the bundled afterburner version the card does not read as a lightning series card. I do not see any change when I switched the LN2 switch. Anyone else have this problem?
System:
MSI Z77 GD65 Gaming Mobo
i7 3770k
G. Skill Trident X 16gb (2x8)
Samsung Evo 840 SSD
Windows 8

Use the latest Afterburner 3.0.0 Beta 18: https://forum-en.msi.com/index.php?topic=161235.msg1277518#msg1277518

Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?

Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?
And is there driver updates for anyone using the all-in-ones HP printers...has anyone been able to use their scanners since the update? and has the dual screen support been added to avoid the blue screen on startup?

The ATI Radeon 9600 PC/Mac edition 256 MB should work in the MDD G4. It has two DVI ports (one is dual-link and can support a 30" display). You will need adapters for ADC displays.

Does MARS 5.2 support FWSM software version 3.2?

Does MARS 5.2 support FWSM software version 3.2?

Hi Andrea,
No. MARS 5.2 only supports up to FWSM 3.1
And MARS 5.3 only supports FWSM 3.1.5
Please take a look for yourself at this document:
Supported and Interoperable Devices and Software for Cisco Security MARS Local Controller 4.2.x and 5.2.x
You can reach it via this link if you are logged into CCO:
http://www.cisco.com/en/US/partner/products/ps6241/products_device_support_table09186a0080467232.html
Hope this helps.
Best,
Paul

Does this software support Bluetooth additional keypad (numbers) to add on original apple keyboard

Does this software support Bluetooth additional keypad (numbers)

Yes. You can pair more than one Bluetooth device to a single Macintosh.

Does Thinkpad 8 20BQ000KXS support UHS-I microSD cards?

Does it make sense to buy a fast UHS-I micro SD card to Thinkpad Tablet 8? Will that make a difference against a standard Class10 SD cards? (meaning, if the SD Card controller in the device supports the fast UHS-I cards)

As stated above, with 20MB/s when the card can odo 80MB/s, it means the intergrated SD card reader on the Thinkpad 8 does NOT take advantage of UHS-I cards! That's a real pity! Thus the original question reformulated:how could we get a real support of UHS-I cards?Driver update? OS update? On windows 10?Or is there any hardware limitation?

Does my TM2 support a firewire card

Hi,
Does someone know if my TM2 supports a firewire card? Thanks.

No there is no practical way to add a firewire card. You have no expressport slot. There is such a thing as a usb to firewire adapter but they tend not to work very well for video capture.
http://www.amazon.com/IEEE-1394-FireWire-Female-Adapter/dp/B007DNHQPE/ref=sr_1_2?ie=UTF8&qid=1373819...

How to generate an interrupt using DI change detection on m-series card

Hi,
I want to generate an interrupt on the positive edge of a digital input signal on the IO connector.
Does anybody know how to configure an m-series card (PXI-6224) for this use through RLP programming?
Thanks in advance,
Richard

Richard vl wrote:
I want to generate an interrupt on the positive edge of a digital input signal on the IO connector.
Does anybody know how to configure an m-series card (PXI-6224) for this use through RLP programming?
RuthC wrote:
I also want to generate an external interrupt on an M- series pci-6229, and on a pci-6602.
1. Is there an exampe how to configure the registers?
2. which external signals can genarate interrupts on those cards?
Hi Richard, hi Ruth,
Let me address your questions together: first for 662x (part of M Series) digital change detection and then for 6602 (part of 660x).
622x (M Series)
Digital change detection has not been released in the DDK for M Series devices. If you must use an M Series device, please ask your field engineer to contact NI support so we can discuss options. On the other hand, digital change detection has been released in the DDK for X Series devices (63xx) [1].
If you can use one from that family, then your programming will be much easier -- the RLP manual discusses change detection as well as interrupts (Chapter 1: Interrupts, beginning on PDF page 48), and the example distribution demonstrates how to configure change detection on the device (dioex3). The last piece is data transfer: the example's data transfer mechanism is DMA, so you would need to supply your own interrupt handler to move data to the host (or alert the host that a DMA transfer has completed).
6602 (660x family)
Moving to the 6602, change detection is not possible. The 660x device family only supports polling for transfering data read on the digital lines [2].
Please let me know if I overlooked anything in your questions.
[1] NI Measurement Hardware Driver Development Kit
http://sine.ni.com/nips/cds/view/p/lang/en/nid/11737
[2] NI 660x Specifications
http://digital.ni.com/manuals.nsf/websearch/57893F11B0C0687F862579330064FF6F
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

Could Cisco 1701 ADSL Router supports WIC-1ENET Card.

Hi,
I need advise as to if a Cisco 1701 ADSL router could support WIC-1ENET Card.
My 1701 Router has WIC 0 as ADSL and WIC 1 as ISDN, could the ADSL card be replaced by a WIC-1ENET. I noticed ,that the cards seems to be rivet onto the back of the Router and not connected with SCREWS as other routers would posses.
Could someone advised as to how i can have this router supports 2 Ethernet NICs or what could be your recommendations?
Thank you,
Cisco End User.

Hello,
the WIC-1ENET is supported on the 1701, but, AFAIK, only in slot 0.
It does not support 2 WIC-1ENET cards, only the 1720, 1750, and 1751 do, with a specific IOS release, check out this info from CCO:
WIC-1ENET- Support for two Ethernet WICs
The Ethernet WIC (WIC-1ENET) provides the capability to deploy additional Ethernet port(s) in a Cisco 1700 series routers. The initial release of the WIC-1ENET supported only one WIC-1ENET card in a 1700 router. The new IOS 12.2(2)XJ release offers the option of deploying up to two WIC-1ENET adapters in a Cisco 1720, 1750, or 1751 router. A total of three Ethernet ports can be configured. A typical application that requires three Ethernet ports involves using the built-in 10/100 Fast Ethernet port for LAN segment. One of the WIC-1ENET port could be used for high-speed broadband DSL or cable modem connection. The second WIC-1ENET port could be used for a DMZ (demilitarized zone) environment for deploying public Web servers or FTP servers. Hardware modification is not necessary to use the capability of IOS 12.2(2)XJ. The new IOS software is compatible with WIC-1ENET adapters already installed in 1700 series routers.
HTH,
GP

N900 Software support is shockingly bad!!!

Nokia. Why release a phone with no/very little software support? It's been about 4 months since the release and it's still not much better!!!
I replaced my Iphone with the N900 because it's meant to be an Iphone beater, but the truth is looking sadly the opposite.
Nokia Map loader is not working and the PC Suite has bugs and it's complicated having to switch between PC Suite mode and Mass Storage mode. What's happened to my free Navigation?
Come on Nokia this is embarrasing, I absolutely love this phone and I want to recommed it to my friends, but with the software situation that's not a possibility.

N900 Personal Review
Hi all, I would like to make some comments about the New Nokia N900.
Shortly the phone SUCKS!
I have been a Nokia user for about 10 years, and for the past 3 I have been using the NSeries, I started 3 years ago with the N95, then moved’ on to the N96 an now as you can see I have had the chance to use the N900 even though my original plan was the N97. The reason for this is that I contacted my provider (T-Mobile UK) as I was due an upgrade, and was told that they didn’t do this handset directly, but I could get this phone if I did the upgrade though Carphone Warehouse (Don’t even get me started on them) any way I contacted Carphone Warehouse and told them that I was due an upgrade and wanted the N97, the idiot on the phone started telling me that the N900 was much better and that it was faster and all. I told him I would have a look into it my self, at least to read some comparisons online. After having read the comparison on several sites, on “paper” the N900 sounded much better, faster processor (N97 is about 400Mhz, N900 is about 600Mhz), more RAM, the use of a Linux based OS and so on, sounded great, I accepted the upgrade with 14 days exchange if not happy.
Well I have used the phone for about 3 days, and let me tell you what I think…
The device is not as fast as people say, you would not think that there is about 200Mhz speed difference between them and that the N900 has double of the RAM then the N97. Yes it does allow you to open several tasks at once, but the CPU drain off more demanding applications is definitely noticeable, for example when running a YouTube page in the background with a video playing and opening other apps, the music temporarily stops just like the N95/N96 did/do.
The fact that it’s a new mobile technology makes it also not very popular right now and there is lack of application unlike the Symbian OS used by the N97, even Nokia them self are not up to speed, the OVI map on the N900 is version 1 point something and is really useless, unlike version 3.03 (3.04 BETA out too) of the N97 (don’t forget that I am using the N97 as a Symbian comparison).
The firmware upgrade is very complex for general users, this includes having to use a Flashing Tool and command lines, I had some issues at the beginning and I am an IT technician. The NSU (Nokia Software Update) didn’t detect the new version available even though the phone was delivered with version 1.x and the version available was 3.2x.
Even the phone “Hard Reset” is complicated, once again you have to use the Flashing Tool and download an other file called EMMC that should technically erase the 32GB memory, but be were, after having used this file my contact were still there and some other information were there too such as my OVI e-mail account and my SKYPE account details, there was also a file from the sketch software that had not been deleted and had to do so manually.
Talking about SKYPE, many sites when comparing N97 to N900 state that the N900 has SKYPE and some other software unlike the N97, well I use to use SKYPE on the N95, it may not be inbuilt but no one says you can’t download it, I use to have SKYPE Lite with many more features then the “messaging” SKYPE inbuilt in the N900. I also use to have 3 different versions of Opera, Windows Live messenger, the IPlayer application, an application provided by SKY TV to control TV listing and Remote Recording, Google Map, Google YouTube application and much, much more, most probably you wont find half of those for the N900, but you don’t see anyone stating that anywhere.
The N900 also lack the option to create folder to organize your applications, any application is “plonked” with the rest in a random order and there is nothing you can do about it, apart from creating a short-cut on one of the 4 useless screens and try to organize it that way.
It also seem to lack the use of the SIM contact option, all you can do is copy from the SIM but not use the SIM storage, now my SIM allows me to store 200 contacts, this would A) save memory on the phone, and B) be used as a back-up of the numbers. I normally use it as B, I back-up the numbers on the SIM (apart from the PC) because the SIM does not die as easy as the phone, lets say (and this has happened to me before with the N96) that the phone drops in the bath, the phone would most probably short and die, but if you had the numbers on the SIM you can move to a back-up phone no problem, same as if you drop the phone and it brakes.
An other issues I had with the N900 is that when you create short-cuts on one of the 4 desktop, you cant align the items, so you may have one up, one down and so on, you would think that they would have a snap to grid or something, but no such thing.
The battery is worse then any phone I have seen, I have lost a “line” while playing only 2 YouTube videos over 3G network hardly anything else running, now the videos were about 3 to 5 minutes each so lets say I lost a battery “line” in 10 minutes, I guess with-in 1 hour your battery would be flat.
The battery charger is not a standard Nokia one (pin) but it uses the same socked of the USB cable, maybe they run out of money while designing, who knows, the only good thing about the charging is that you can charge it while connecting to the PC via USB.
The keyboard misses the mouse pad that we have on the N97, and even thought the device supports on-screen keyboard too, I have noticed that many of the application only support the normal slide-out keyboard, application such as the OVI map (while using the search address option).
The messaging options are very limited too, IM and SMS is all included in an option called conversations located in the main menu, as far as I have seen you are also not able to select multi items when trying to delete them, and this does not only happened in the “conversations” section, I had to delete all the inbuilt songs 1 by 1 and several other files 1 by 1.
The camera options are very limited too, and the picture quality is very poor as far as I can see, I have taken better pictures with the N95 2 years ago.
There seem to also be a limitation when trying to edit website short-cuts name on the desktop, the name is basically what ever the site owners use as a title for the site, for example YouTube uses “YouTube – Broadcast Yourself” and that’s what the phone seems to use as a desktop short-cut title.
The 3G seem to also run slower on this device, web-page loading time between this phone and the N95 seems to be slower more then faster.
And this is what I have discovered in 2 and a half days of using the phone, I don’t even want to imagine how dissatisfied I would have to be if I had to keep this phone for 12/18/24 months, luckily I have the 14 days to exchange and will contact Carphone Warehouse in the morning to arrange an exchange for the N97, I have already taken my SIM card out and placed it in a spare N95 I have at home, that’s how quick I want to get away from the device.
My general advice would be to stay away from this phone and technology at least for now, and not to always believe what is stated by device specs on “paper” as sometimes it’s not all as expected.
This phone reminds me of a scene from the film “Bad Boys 2” when Will Smith is driving the black Porsche with Martin Lawrence.
Marcus Burnett (Martin Lawrence): You mean, y'all paid, what, $80,000 for this car and you ain't got no damn cup holder?!
Mike Lowrey (Will Smith): It's $105,000 and this happens to be one of the fastest production cars on the planet. Zero to sixty in four seconds, sweetie. Limited edition.
Marcus Burnett (Martin Lawrence): You damn right it's limited! No cup holder, no back seat. Just a shiny **bleep** with two chairs in it. I guess we the balls just draggin' the **bleep** along.

Does VI Logger software support M series cards?

Similar Messages

Maybe you are looking for