Does webcam signature need to be set up?
I am trying to add my signature through webcam option, but Adop pro does not communicate with my laptop .webcam
Hi accountant member,
Please see this tutorial: https://acrobatusers.com/tutorials/how-to-sign-a-pdf-file-using-a-webcam-image
(Webcam is an option in Acrobat XI for Windows only.)
Best,
Sara
Similar Messages
-
To Access AME for iProcurement, does the user needs to be set up as a buyer ?
Hello,
We are on Oracle R12.1.3.
We are switching on the Approval Management Engine (AME) for iProcurement and Purchasing.
we are about to assign the AME responsibilities “Approvals Management Administrator” and “Approvals Management Business Analyst” to a user , USER123
Does USER123 need to be set up as a buyer to create AME rules ?
Regards,
NataliaAME rules for iProcurement are defined for requester. So to test the AME rule itself, you need not be a buyer.
Besides, configuration responsibility can be granted to any employee (From IT department) who may not be a buyer in the role.
So the answer is "Not required" -
Hi. My husband and I have always shared the same iTunes account. Since installing iCloud, all our contacts and calenders have merged on our iPhone 4, which we do not want. How do I rectify this? Does my husband need to set up his own apple ID? If so, where do I need to change his email address info, so that his calender and contacts remain his? Thank you
You can continue to use the current AppleID for iTunes, but your husband can create a new AppleID to use to create a new iCloud account that will be his own and not overlap with yours. If you do not have another email address to use for an AppleID, just get a free Gmail account and use that.
You can have as many AppleIDs as you want (or at least, as many as you have email addresses for). You can use a separate AppleID for the store, another for iCloud, and even another for iMessage if you wish.
You will want to keep the current one as the shared one for the store as all your previous purchases are permanently tied to it, and thus you need that AppleID to update or redownload your current purchased content. -
Can I track my iPhone from my iPad if I have not activated the 'find my iPhone' on my mobile? Or does this need to be set up already in order to search for my phone?
No.
You needed to have set it up prior. -
Does the iPad mini have a setting so it can be used with either 120 or 240 electrical current? If yes, how do you go about setting the desired input voltage? I will travel to Northern Europe and want to know if I will need a voltage converter.
The iPad charger is dual voltage. You need only a plug adapter to be able to plug your US charger into a European wall outlet. A basic one costs about $2.00. - $6.00. Like this...
http://www.amazon.com/CVID-Grounded-European-Adapter-Adaptor/dp/B0098B5GN8/ -
Is it possible to hook a USB external hard drive to an iPad?.....the HD has video on it that I wanna watch on my iPad but don't wanna store it on iPad or iTunes....and way format does the video need to be in to watch on iPad?
There are some wireless external hard drives that can be used with the iPad.
The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
Pad2, the new iPad Supported Video Formats & Movie Formats
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
Cheers, Tom -
Xslt error: the expression does not evaluate to a node-set
hi guys - i'm really down because i cannot find / understand my xsl error and i have to finish my work very very soon
the error message (by using xalan to create from the xml file my html output) is the following:
xslt error: the expression does not evaluate to a node-set
and the code fragement is:
<xsl:template name="getNext">
<xsl:param name="currentKnoten" />
<xsl:for-each select="$currentKnoten"> //error is in this line
</xsl:for-each>
</xsl:template>please... help me....ok thanks!!! this saved me some time ;-)
now i go back to the origin problem... my main idea is the following xsl code... may u can see here the problem with the node site.. but i think u need the xml file or?
however this is my relevant xsl code:
<xsl:template match="DATA">
<xsl:element name="process">
<xsl:attribute name="name">
<xsl:value-of select="@name" />
</xsl:attribute>
<xsl:apply-templates select="INSTANCE"/>
</xsl:element>
</xsl:template>
<xsl:template match="INSTANCE[@class='Data']">
<xsl:element name="node">
<xsl:attribute name="name">
<xsl:value-of select="@name" />
</xsl:attribute>
<xsl:attribute name="class">
<xsl:value-of select="@class" />
</xsl:attribute>
<xsl:call-template name="copyAttributes" />
<xsl:variable name="nextNodes">
<xsl:value-of select="key('keyGetData', key('keyFrom', @name)/../TO/@instance)" />
</xsl:variable>
<xsl:call-template name="getNext">
<xsl:with-param name="currentNode" select="$nextNodes" />
</xsl:call-template>
</xsl:element>
</xsl:template>
<xsl:template name="getNext">
<xsl:param name="currentNode"/>
<xsl:for-each select="$currentNode">
<xsl:element name="node">
<xsl:attribute name="name"><xsl:value-of select="@name"/></xsl:attribute>
<xsl:attribute name="class"><xsl:value-of select="@class"/></xsl:attribute>
<xsl:variable name="nextNodes">
<xsl:value-of select="key('keyGetData', key('keyFrom', @name)/../TO/@instance)"/>
</xsl:variable>
<xsl:call-template name="copyAttributes"/>
<xsl:call-template name="getNext">
<xsl:with-param name="currentNode" select="$nextNodes"/>
</xsl:call-template>
</xsl:element>
</xsl:for-each>
</xsl:template>
<xsl:template name="copyAttributes">
<xsl:for-each select="descendant::*">
<xsl:copy>
<xsl:copy-of select="@*|node()"/>
</xsl:copy>
</xsl:for-each>
</xsl:template>
<xsl:template match="@*|node()">
<xsl:apply-templates/>
</xsl:template> -
How does one manage these new render setting for previews?
I placed 4 HD clips from a nested into a sequence 5800 x 768 to mimic 4 side by side monitors for a multi channel video. Each clip cut from the sequence are at 1280x720 all sitting side by side. However when I rendered the previews, they came look all squished. However when I exported the frame it looks fine in Photoshop. (I changed the uploaded image to what it looks like in Premiere in Photoshop to demonstrate the appearance in Premiere.)
I imagine that the distortion has to do with the sequence render setting which for some reason comes out to 1918 x 253...or the pixel aspect ratio? How does one manage these new render setting for previews so it looks normal in the monitor?
Either way, I thought that this format would be a great way to view on the monitor 4 channels at the same time. I may need to place them on a “normal” 1440 x 1080 sequence in a line, bringing them down to 25% scale to make it work in the end. I did just try that. I think it will work...but when I imported and nested the old file, the scratch disks changed from the original set up on a D drive back to the main hard drive so I had to change it agin. Otherwise it works fine...so I’ll go with this for now
These are the instructions I was given.I attched a screen save of the AE file they asked me to use (They must be on vacation, because I have not been able to get hold of them). I don't know After Effects very well:
“As you begin creating or adapting work for e4c, you may find an After Effects template developed for this system to be helpful. Attached you'll see a zipped file with two AE templates. There is some detailed information (below) from the artist that developed these for us. In addition, a few bits of information that might help you along are:
· The "Watchout" playback system can support WMV or a QuickTime files . We like .mov files with H.264 codec best!
· The end resolution of the four screens is 5120 x 720 pixels (1280x720 each).
· If works are four-channel, please provide a separate audio (aiff) file so it doesn't slow any one video down.”
Thanks for your help! -
Why does Sun Studio need NetBeans?
Hi!
Why does Sun Studio need a NetBeans installation for running successfully? If I am not too wrong, I believe Sun Studio has the same relation to the NetBeans project as Star Office has to OpenOffice.org?
Now, coming to the solution. I am using Sun Studio 12 on Solaris:
amit@opensolaris:~$ sunstudio --netbeanshome /export/home/amit/netbeans-6.5beta/bin/
Validating NetBeans IDE at: "/export/home/amit/netbeans-6.5beta/bin/"
Sun Studio is unable to find a supported version of the NetBeans IDE at the specified location.
Sun Studio requires a NetBeans IDE version 5.5.1 with NetBeans C/C++ Development Pack version 5.5.1
installed. Sun Studio looks for a valid NetBeans IDE installation in the following order:
1) Location specified with --netbeanshome command line option
2) At /opt/netbeans-5.5.1 location, if exists
3) At /opt/SUNWspro/../netbeans-5.5.1 location, if exists
4) At /opt/SUNWspro/../../netbeans-5.5.1 location, if exists
Please run the System Preparation Tool (prepare_system), if available, to set up your environment.
As is apparent, I have a NetBeans 6.5 Beta build.
What is the solution?
Thanks,
AmitThe realtionship from SunStudio to NetBEans is more than a line from A to B.
Ideally SunStudio releases would track NetBeans releases.
However, NetBeans evolves at a rather fast pace. At the same time SunStudio
also contains compilers which have their own products to coordinate with ...
OS releases, new SPARC chips and Sun system releases.
These releases never coincide so SunStudio tends to lag in it's dependencies
on NetBeans and as a result ships with it's own copy.
We used to actually build our own, sometimes tweaked, NetBeans for SunStudio.
Weve made some progress in that we just pick released NetBeans bits and re-ship them.
We're working on the ability for SunStudio to use NetBeanses which are already
installed.
To make older SunStudios use newer NetBeans is a tougher proposition but
we're dedicating grey cells to that matter as well.
If you really want a NB 6.5 based SunStudio wait a bit. We'll be releasing
SunStudio SX based on NB 6.5 shortly. -
Does replication group have to be set for session replication
I have delployed an servlet based application on a 3 node cluster. I have a simple POJO that I use to carry data in the session from a "confirm?" to "confirmed" page. This object implements serializable and only has String and int members. I put it in session using request.getSession().setAttribute("dto", myobject). For some reason it is not being replicated to the other nodes in the cluster. My weblogic.xml has "PersistentStoreType" set to "replicated_if_clustered". I am not seeing any serialization or other errors in the node logs.
I have looked at information contained in the link below and I think we are doing everything right. http://support.bea.com/application_content/product_portlets/support_patterns/wls/HTTP_Session_Replication_Failures_Pattern.html
The only thing that I noticed is that the "Replication Group" is not set for any of the servers in the cluster. Does this need to be set for replication to happen?Hi,
Having replication group is optional. It is used only if you are implementing failover in cluster. For session replication one has to generally configure 3 things:
- in memory replication
- jdbc replication
- file sytem replication
for im memory replication,
Step 1:
make sure taht a client is accesing the cluseter using either
- load balancing hardware
- web servers with weblogic proxy plugin
Step 2:
specify the persistance type in weblogic.xml
Thanks,
Sushma -
I need help in setting up a wireless connection
I need help in setting up a wireless connection.
I have a 2005 iMac G5 and currently I am using a Qwest DSL Modem with a Belkin router.
Qwest suggested that I buy a new wireless modem/router. It may be the Motorola 3347 or another wireless modem. I am worried about security when on the internet and have read about changing the SSID password and use the WPA for encryption. All of this is a mystery to me.
Also, I would like to buy from Directv the Linksys wireless adapter to use on my HD-DVR receiver to get their “On Demand Movies.”
My question is, does my iMac G5 have all of the security I need to use a wireless modem, and with the Linksys adapter can I view my photos or DVD’s in iMovie wirelessly to my TV in the living room?
I am concerned about security with a wireless setup, but it seems that all of the new TV’s have the ability to have a wireless connection to the internet.
Any suggestions would help me.
Thanks,
DaisyMayNETGEAR RangeMax Dual-Band Wireless-N Router with 4 Ethernet Ports
Model: WNDR3400-100NAS | SKU: 1208844
This wireless router enables speeds up to 600 Mbps for efficient operation and features a broadband usage meter that ensures accurate measurement of daily, weekly and monthly Internet traffic.
4 Read reviews (21)
Sale: $79.99 -
On both my desktop and notebook, sync just stops working and needs to be set up again! Although my account is still there ?
I have windows 7 on both computers and I use the paid version of Roboform (which does not encounter any problems!) So, I really need my sync to work and keep working. Please help......Do you mean that after closing the browser your Sync set up is gone and you need to Set it up again?
This is, generally, because your privacy settings are too restrictive and you are deleting the password of your Sync account.
You can modify this in the Privacy tab of your Preferences/Options window. Select Remember History or Use Custom Settings in the drop down to configure the level that you want. -
When creating a connection key in cs5, does each user need a separate connection key?
I am setting up multiple users to access a site in contribute (cs5). Does each user need their own connection key or can 1 key be sent to multiple users?
Hi,
If all the users belong to the same role (like all users are Publishers or Writers), then, you can send a single connection key for all the users. But, if users belong to different roles, then, you will have to create connection keys for each role and then send it to the users.
Hope this helps. -
Does Partitioning Tables need more Space
Hi,
Can some one tell me does Partitioned table need more space than a general tables(i.e with out any partition). If so what can be the percenatge difference.
ThanksPaulHorth wrote:
don't forget that your data could be such
that certain partitions never get any rows in them - thus wasting space.
It is not having/not having any rows in a partition but rather init.ora parameter deferred_segment_creation setting. By default it is set to true, which means segment will be created on first insert.
SY. -
Why does viber keep asking me to set up again when I have already set it up about 3 times and used it successfully. Will be overseas without my mobile and will be unable to retrieve the sms code to set it up if this happens when I am away so should I reinstall it ?
ISSUE FINALLY RESOLVED!!!!!!
So, it turns out, I had to restore the iPhone...with a twist! Here are the steps:
FIRST BACK UP YOUR DEVICE
1. Go to the library (Hold option, click on "go" in the finder, then go to library)
2. Go to your iTunes folder in this Library (not application support, the main iTunes folder)
3. Go to the iX software folder (i.e., iPhone software, iPad software, etc.) and delete the file in this folder
4. Hook up the phone and then click on restore iPhone.
At this point, it will redownload the entire OS again. You must then restore the iPhone. As it is downloading the iOS, you can disconnect and use your phone for probably however long you want (I did the restore the same day as the download) and when you are ready you can hook up the phone and restore it.
THE MOST IMPORTANT STEP FOLLOWS:
And one many may dislike. Upon restoring the phone, you MUST select "Set-Up as new iPhone"
You need to make sure you've backed up EVERYTHING elsewhere. 3rd party, non-apple/icloud apps will lose data through this method, and you'll lose all texts, your call history, and super old voicemails. The upside is that, if you've backed up, then you can just restart the process if you forgot something. But seeing as how the popup was interfering with my ability to use iCloud (I couldn't sync anything, such as calendar events, reminders, etc., unless I had gone into mail to sign in to iCloud), it was totally worth it....no more popups.
My only wish is that this thread becomes popular. Many people have this issue and you should only use this method as a super last resort (after trying literally everything I had written previously).
Maybe you are looking for
-
I need to use an ebook online but whenever I try opening it nothing happens, I emailed their tech support and they said I needed to enable cookies. I followed the instructions on your website and when I hit ok and closed the options tab nothing chang
-
Can any one help? I have subscribed to the cloud package including Ps and Lr after previously downloading the Ps CC trial. Cannot open up a newly downloaded Ps, just keeps saying that my trial has expired. I have looked online for help but just keep
-
Adding more Push buttons in Status Flow of Objective Settings & Appraisals
Hi, In my Template Design, under status flow tab, we are able to create new push buttons. SAP is allowing, to create only upto 3 push buttons per outbound status/sub-status combination. In our application, we need 5 push buttons in one of the outboun
-
Help needed upgrading from Windows 8 to XP for Conexant Sound Driver
I upgraded from Windows 8 to XP and got everything else working except for the sound. I have scoured the internet and tried many versions of drivers from windows 7 ones to XP ones with no success. I tried older driver´s version as well. After a rebo
-
Why Do I get 0h hours for resources after using Resource Levelling in Project 2010?
Hi, We are using MSProject 2010 and Project Server 2010 with Enterprise resources. All resources on all projects in the enterprise are shared resources. We are finding that after resource levelling is applied to the project some resources are only be