Does Win2008 MSCS cluster software and server bindings relationship?

The virtual machine virtual uses the remote storage
of direct mapping by PVSICS technology
, when the virtual machine through HA change the host, why MSCS services will be abnormal, often IO Catton,
but after restarting the MSCS service,
the virtual machine‘s IO becomes normal, Is it right? Does the Win2008 MSCS and physical server
bindings some relationship?
Urgently,
thanks.
<//span>

If I interpret your question correctly, you are asking about the use of physical storage directly attached to a virtual machine. This is not a recommended practice as it limits the portability of a virtual machine because it is tied to a specific
hardware configuration.
If that is not what your question is about, please try providing more information about what you are trying to do instead of how you are trying to do it.
. : | : . : | : . tim

Similar Messages

10g RAC on varitas Cluster Software and Shared storage

1. Install oracle binaries and patches (RAC install)
2. Configure Cluster control interface (shared storage) for Oracle
3. Create instances of oracle
These are 3 things i am wondering how to handle, I did all these on Oracle Clusterware , but never on Veritas Cluster ware ...all these 3 steps are the same or different. In someone can help..

How we can do this while using varitas cluster software
1. Install oracle binaries and patches (RAC install)
2. Configure Cluster control interface (shared storage) for Oracle
3. Create instances of oracle
If we install RDBMS 10.2.0.1 with standard installer it will catch the vcs and when we will be running dbca it will ask for RAC db option?
what is Configure Cluster control interface (shared storage) for Oracle??

I would like to update my ipad software but under general settings my ipad does not say update software and I would like to update to a ios 5.0 or higher how do I do this?

I would like to update the version of my ipad from ios 4.3.3 to a 5.0 or higher, but under my ger
nerel settings it does not say update software. So I would like to know how else I can do this.

Hello Babs713,
Which iPad do you have?
You have iOS 4.3.3; you need to connect your iOS device into iTunes, and update it in iTunes. To update over-the-air you need at least iOS 5.
Update your device using iTunes: http://support.apple.com/kb/ht4623
Cedric

How can I disable windows firewall and install cluster software and its service using unattended.xml file?

platform: 2008r2
services which need install: MSDTC Service, Windows Cluster Service, SQL Cluster

Hi,
I am not quiet understanding your question, could you clarify your question, as far as I know, an answer file is an XML-based file that contains setting definitions and values
to use during Windows Setup. In an answer file, you specify various setup options, including how to partition disks, the location of the Windows image to install, and the product key to apply. You can also specify values that apply to the Windows installation,
such as names of user accounts, display settings, and Internet Explorer favorites. The answer file for Setup is typically called Unattend.xml.
The related KB:
Building an Answer File
http://technet.microsoft.com/en-us/library/cc748874(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows 7 - Does both the AWare software AND executables work?

Hi -
I've read in parts of the forum that Authorware may work in Windows 7. I wanted to get a clarification.
1. Can Authorware 7 be installed on Windows 7 and does it still work fine? (I haven't upgraded yet..but trying to plan for the future.)
2. Will the Authorware 7 executable files still work in Windows 7?
Thanks!
Scott

You can probably find more detail if you do a search with google, but roughly:-
viewing web published content delivered to an LMS requires that you wrap your Authorware content in an iFrame. This is because IE 7 and 8 have upgraded security that breaks Authorware's native communication with the MS via JavaScript. Specifically, I think this is ReadURL and/or PostURL that broke.
Video in the Movie icon, the only video that is supported is that which was supported in Authorware 6 and earlier. In 6.5 the Movie icon was adapted to play newer video types (WMV, MPG4 and more) by utilizing the Windows Media Player. Microsoft changed the Windows Media Player with Vista, and so broke this upgraded video payback.
Authorware the authoring tool works just fine on Vista and Windows 7.
Steve

How to install CCMS agent in MSCS cluster system?

Hi,
We just migrated our WAS 7.0 system from a single to a MSCS cluster system and we need re-install CCMS agent on it. New cluster system have two nodes. Each node we have local SAP instances. We have central instance for message server running on a shared drive, which can failover to one of the nodes. My question is when I install CCMS agent, where I should I install it? Each node of the cluster on local drive or only shared drive or I have to install on three places?
Thanks you.
Yujun Ran

Hallo.
Did you solve your issue?
I followed Oss note 536954, but I am not sure that it is for new cluster system.
Furthermore, the CCMS agent that you installed, point to a CEN system (as Solution manager for example) and as second system to the central instance ?
Thanks.
Mario

Simultaneous Client and Server Form Validation using Custom Tag Library

I am developing a custom tag library for validator tags
which are capable of doing client side validation (Javascript)
and server side (Java). My problem is with the development
of a regular expression based validator. Because of differences
in the way Javascript and Java handle regular expressions
i can not use the same regular expression for both types of
validation. Is there any way to convert a valid regular
expression from the java.util.regex format into the Javascript
format or vice versa? My major problems are with the (or, ||)
statements and the user of backslashes.

If you are speaking of RE syntax flavours, they are basically the same(namely perl5 flavour). Any expression that works in JS should work in j.u.regex too.
Though, their usage is quite different.
So, there is no need for convertion of expressions.
But porting the code may be not so trivial.

Questions regardin "Oracle Database does not support Hyper-V and "

Platform 287 Microsoft Windows Server 2008 (64-bit Itanium)
1 - Can you give me some details about what is not supported of the Hyper-V environment?
2 - There are know issue running Oracle in a Hyper-V child partition/virtualized partition ?
2 - There are know issue about curruption of datafile using snapshoting,
Thanks in advance.

Hello.
Can anybody explain, how should I understand this "Certification Information" from Oracle metalink?
==Quote ==
"Oracle Database is certified with the following Windows Server 2008 editions:
* Windows Server 2008 Standard (x86 and x64)
Oracle Database does not support Hyper-V and Server Core in Windows Server 2008.
==/Quote==
Does it mean that this OS is supported, but only if it does not run in Hyper-v configuration?
Thanks for your advice.
Jakub

10g RAC on varitas Cluster Software & Shared storage

we are in process of making 10g RAC without using Oracle Clusterware , we will be using Varitas Cluster software and varitas shared storage , I am looking for some quick notes/article on setting up/Installing this RAC configuration.

Step-By-Step Installation of 9i RAC on VERITAS STORAGE FOUNDATION (DBE/AC) and Solaris
Doc ID: Note:254815.1
These are the notes i was looking for, Question is Only the RDBMS version will be changes , all other setup will be same as mentioned in Notes, and DBA work will start from creating DBs, right?

When trying to Sync my iPhone i got a message saying that my phone could not be read and that it should be restored, upon doing so i got another message saying the iPhone software update server could not be contacted what do i do?

When trying to Sync my iPhone i got a message saying that my phone could not be read and that it should be restored, upon doing so i got another message saying the iPhone software update server could not be contacted what do i do?
I have now discovered that i cannot update or restore any of my devices

Were those items purchased or downloaded under a different apple ID than what you are logged into on the phone?

"The iPod software update server could not be contacted. The Server does not support this version of iTunes." Any thoughts? Also, iPod will not turn or or charge (tried in my laptop, house computer and dock) I have all the lastest updates to my knowledge

"iPod software update server could not be contacted. The Server does not support this version of iTunes." iPod will not turn on or charge or reset settings. I tried plugging it in my laptop, house computer and docking station to charge and nothing. Also, I have all the latest software updates to my knowledge. This is a classic 8GB iPod, running of Windows 7. Any thoughts/suggestions?

only thing that seems to work so far is syncing without photos and also check here https://discussions.apple.com/thread/3206849?start=30&tstart=0

Hi, we have a G5 Blade server running OS X 10.5.8 with a dual Fibre Channel card. The OS does not read the card and cannot establish connection to the RAID controller. I have tried to move the card to another port with no luck. Ran all the updated softwar

Hi, we have a G5 Blade server running OS X 10.5.8 with adual Fibre Channel card. The OS does not read the card and cannot establishconnection to the RAID controller.
I have tried to move the card to another port with no luck.Ran all the updated software possible. Please can someone advice

Hi,
Was the card previously working in that machine? If it was and you have a G5 tower you could try the card in there. Here is a list of Apple fibre cards and cables which show what's compatible with what. http://support.apple.com/kb/HT1769
The card should appear in the System Profiler under Fibre Channel and PCI Cards.
All the best
Beatle

MSCS cluster installation on win + sql server 2005

Dear Guru,
I want to installing MSCS cluster installation on win 2003 ENT.with sql server 2005 .
Choosing High availability (ABAP)
Please Guide me prerequisit & partation on local & shared disk.
Its Urgent.
Personal mail ID is [email protected]
Regards
Amol kulkarni
Message was edited by:
amol kulkarni

Hi,
You know what ?
Step by step installation is different in every company because each company has a different usage of SAP software.
It is precisly your job as a SAP sys admin, to study the problem, to solve it and to write the step by step documentation.
In my company, it took me one month and my documentation is 250 pages long.
You will not get someone else doing YOUR job instead of you.
The standard SAP documenation is perfectly enough to study your particular case...
Good luck !
Olivier

I forgot my password and am trying to reset my ipod,but it won't work. It says that my ipod is in recovery mode and that I must restore it. I click ok, and then restore, and then restore and update. then it says contacting ipod software update server and

I forgot my password and am trying to reset my ipod, but it won't work.It says that my ipod is in recovery mode and that I must restore it. I click ok, and then click on restore and update. Then it says connecting ipod software update server and a screen pops up with ipod software update on the top and iOS 5.1. It lists a bunch of stuff this update contains and on the bottom it says next, which I click and nothing happens, it just goes back to the ipod restore page. Help, what am I doing wrong?

This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.

Hi i am trying to install windows to my macbook through boot camp and i get this message Can't install the software because it is not currently available from the Software Update server.!!!what can i do???please help me!

Can't install the software because it is not currently available from the Software Update server. this is the message that i get a few days now that i am trying to install windows through boot camp to my macbook!does anybody knows what i can do????

You keep it on the usb stick for after you boot into Windows. From Windows you install the Windows Support software on the stick. Do you realize that you need to buy and install Windows? The Windows Support software you downloaded is only the Windows drivers for your hardware.
Read the Boot Camp installation instructions and help guides located here: http://www.apple.com/support/bootcamp/

Does Win2008 MSCS cluster software and server bindings relationship?

Similar Messages

Maybe you are looking for