Does windows 2008 compatible with Oracle 10.1.0.2.0

Hi Dear,
Does windows 2008 compatible or support with Oracle 10.1.0.2.0 ? if not then
Oracle 11g compatible with windows 2008 server .
we have Oracle 10g application server on top of oracle 10.1.0.2.0 database on AIX. we are looking forward to migrate oracle 10g database from
AIX platform to windows 2008 server. so i need to be 100 sure that windows 2008 support oracle 10g,if not if we migrate oracle 11g then oracle 1og application
server work on top of 11g database. please assist me.
Best Regards
------------------

Hi Sybrand,
sybrand_b wrote:
Migrating from a real scalable OS like AIX or any other flavor of Unix, like Linux to a non-scalable OS like Windows 2008 can not be recommended.
If you do this only for cost reasons, you should reconsider.
My guess is this is some managerial directive.I agree with you that any flavour of *nix is better than Windows, but the reality is that there might be situations where a Windows-platform is better.
If the entire server park is Windows, then the delivery will be better with a platform change. It's much likelier that the machine will stand abandoned in a corner, slowly rotting away if nobody really knows how to to manage the beast...
The world isn't black and white, and it isn't always about which is the better technical platform. If it was, the whole world would be using *nix-servers... ;-)
//Johan, OCP and Unix/Linux sys admin since 2000

Similar Messages

  • Windows 8 compatible with Oracle forms and reports 6i?

    Hi Guys,
    Were planning to use the WINDOWS 8 and I just want to know if it is running if i will use the Windows 8 for ORACLE Forms and Reports 6i?
    Thanks.
    Lala

    Hi.
    Haven't tried it but as you probably already know, the combination is not certified by Oracle. I guess it could work as long you are not using some OS specific functions. In either case I recommend you to test the application thoroughly before deploying it to production. That is the best advice I can give it to you.
    Best regards.

  • Crystal in Win 2008 64 with Oracle

    I'm using windows 2008 64 with Oracle client 64 VS 2008, what kind of connection i can use to connect to oracle?
    I tried to use oracle OLE DB but it doesn't work, it returns only 1 column of data.
    I tried to use Microsoft OLE DB for oracle and i'm getting the following error:  "Invalid mapping type value in CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.VerifyDatabase()".
    I can't use Native oracle connection because Crystal 2008 is not compatible with 64.
    How can i solve this problem?

    Since the Oracle client is 64 bit and CR 2008 is 32 bit, you wil not be able to use CR 2008. Your only option with with 64 bit Oracle client and .NET 2008 is Crystal Reports Basic for Visual Studio 2008 (CR 10.5) which bundles with .NET 2008. And ODBC only. For more info, see the article [Crystal Reports support of 64-bit Operating Systems|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e].
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • Install Oracle 11gr2 on Windows 2008 R2 with ASM step by step Guide needed

    Hi,
    I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.
    Thanks in advance.
    Sujith

    Hi Sujith;
    I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.You need to install grid first(Software only) its neccessary for ASM, Than you need to use asmca to create asm disks than you need to install 11gr2
    All doc avaliable at:
    http://www.oracle.com/pls/db112/homepage
    Regard
    Helios

  • Does Photoshop CS6 compatible with Windows 8?

    Does Photoshop CS6 compatible with Windows 8 Consumer Preview?

    As far as I can see it is.  Everything seems to work.
    http://forums.adobe.com/thread/978973?tstart=30
    -Noel

  • HT1899 Does Windows XP work with Mountain Lion or not compatible?

    Does Windows XP work with Bootcamp in Mountain Lion or is it not compatible?

    Welcome to the Apple Support Communities
    Boot Camp 5, the version that comes with OS X Mountain Lion, is only compatible with Windows 7 and soon with Windows 8.
    However, if you upgrade from an older OS X version and you have Windows XP or Windows Vista installed with Boot Camp, you can continue using it without any problem, but you won't be able to update the drivers

  • Which latest web logic server compatible with oracle 11g database

    which latest web logic server compatible with oracle 11g database >is weblogic server 12c is compatible with oracle 11gR2

    current environment= forms and reports 10g and database 10gR2,os windows 32-bit.
    wants to implement and configure as below:
    server1: web-logic server 12c with forms and reports upgrade from 10g to 11g where os 64-bit windows.
    server2: upgrade and migrate  from 10gR2 11gR2 from windows xp to windows 2008-R2.
    how to achieve this.what step should perform first.

  • Which version of Weblogic on Solaris is compatible with Oracle 8.1.7 - Unicode?

    Hi folks,
    We want upgrade WLS 4.5.1 to one of the last version of WLS, but also we are
    planing upgrade Oracle to 8.1.7 version and migrate the character set of the
    database to UTF8 (Unicode),
    so we need to know which versions of WLS are compatible with Oracle 8.1.7
    and Unicode as Character Set.
    Thanks in advance.
    Moises Moreno.

    Hi Moises Moreno
    The latest version of weblogic server is 6.1 with service pack 1. This version
    supports oracle 8.1.7 on major unix platforms viz., solaris(2.6,2.7,2.8),
    hp-unix(11.0,11.0i), linux7.1, Aix4.3.3 and on windows platforms viz.,
    NTwithsp5, 2000.
    BEA jdrivers are having Multibyte character set support (UTF8).
    Note : Weblogic server 5.1 with SP10 also supports oracle 8.1.7.
    FMI : http://www.weblogic.com/platforms/index.html#jdbc
    Thanks & Regards
    BEA Customer Support
    Moises Moreno wrote:
    Hi folks,
    We want upgrade WLS 4.5.1 to one of the last version of WLS, but also we are
    planing upgrade Oracle to 8.1.7 version and migrate the character set of the
    database to UTF8 (Unicode),
    so we need to know which versions of WLS are compatible with Oracle 8.1.7
    and Unicode as Character Set.
    Thanks in advance.
    Moises Moreno.

  • Upgrade of Integation Services (Windows 2012 R2) on Windows 2008 R2 with Exchange 2013 SP1 DAG fails

    Here is the scenario:
    Legacy Host: Windows 2008 R2
    Guest VM: Windows 2008 R2 with Exchange 2013 SP1 DAG cluster.
    After importing the VM (2008 R2 and Exchange 2013 DAG) into a 2012 R2 host (Cluster).  (copy VM files to new 2012 R2host) Everything works fine.
    Then upgrading "Installation Services" (for Windows 2012 R2 host) on the imported VM runs fine with no errors to the "Restart" prompt. VM than shows: "Configuring Windows updates 32% complete. Do not turn
    of your computer." Hangs there for about 20 minutes until is says "shutting down". Hangs there for 20 minutes until power off. Restart to normal start; "Preparing to configure Windows. Do not turnoff your computer." proceeds slowly
    to "Configuring Windows updates 32% complete. Do not turn of your computer." hangs there again indefinite. Sometime hangs at shutdown cycle and "Configuring Windows updates 32% complete. Do not turn of your computer." indefinitely.
    I moved 20 other machines from a 2008 R2 host to new Windows 2012 R2 hosts all of these machines install the 2012 R2 Integration services just fine on the 2008 R2 VM. Just the 2008 R2 VMs clustered (DAG) and Exchange 2013 SP1 do not take the Integration
    Services upgrade.
    Any advise from Microsoft? I know I could decommission the DAG and Exchange machines and install Integration services on the native box before Exchange and DAG and that would sure work, but I'd rather avoid that amount of work for a simple integration layer
    upgrade.
    Thanks
    Gerhard Waterkamp ACSLA Inc.

    Hi,
    Could you try use the following method to fix this issue first?
    1. Run the System Update Readiness Tool, then check if there is any error in the Checksur.log and checksur.persist.log.
     1. Please run the System Update Readiness Tool on this affected server. Please download this tool from the following Microsoft article:
     Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, and for Windows 7
     http://support.microsoft.com/kb/947821/en-us
    2. The System Update Readiness Tool creates the log files that captures any issues that the tool found or fixed. The log files are located at the following location:
    %SYSTEMROOT%\Logs\CBS\
    3. Please paste the checksur.log here for analysis.
    If there is no error found, please try the following step.
    ==================================
    2. Use Fix it tool to reset the Windows Update components.
     1. Open the following link.
     http://support.microsoft.com/kb/971058/en-nz
     2. Select Windows 8.1, Windows 8 and Windows 7 in the product selection box.
     3. Click “Run Now” to reset the Windows Update components.
    Note: We can reset the Windows Updates manually by following the steps in the KB above.
    3. Use the System File Checker tool to repair missing or corrupted system files
     1. Open the command promote with Administrators.
     2. At the command prompt, type the following command, and then press ENTER:
         sfc /scannow
    Any errors are found in the steps above, please let me know.
    Hope this helpful.
    Best Regards,
    Jason Zeng
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • SQL Developer 3.0.04 generated scripts not compatible with Oracle 10g (XE)

    HI,
    I tried to do an export from one XE database (still 10g) to another XE database. (also 10g).
    I tried to do a database copy as well as a separate export and import (by loading the file and running as a script).
    Neither of them work without modifying the files as it seems that SQL Developer generates scripts that are only compatible with Oracle 11g.
    - Create table contains "segment creation automatic"
    - Storage clauses contain parts that are not compatible with 10g
    I ran through the wizard several times but neither can I find an option to choose for compatibility with earlier versions of Oracle.
    Checked the preferences screen as well.
    Is this a well hidden option or is it not possible to make this work for 10g.
    Extra : found workaround by removing the storage clause to the export. Is there another way that does not force me to remove the storage clause?
    Edited by: kcaluwae on 24-jun-2011 6:03

    I'm sure this is far from the supported way to fix this but, seeing that it's apparently an issue with the classpath or something in it, I hacked <sqldeveloper_install>\sqldeveloper\bin\sqldeveloper.bat and added [ORACLE_HOME]\jdbc\lib\ojdbc6.jar to the classpath. At least that gets me started with 3.0 and lets me create TNS connections.
    I'd really appreciate a better solution, if any of you kind folks knows of something.
    Thanks,
    Kelly

  • SAP ECC 6.0 installation in windows 2008 clustering with db2 ERROR DB21524E

    Dear Sir.,
    Am installing sap ECC 6.0 on windows 2008 clustering with db2.
    I got one error in the phase of Configure the database for mscs. The error is  DB21524E 'FAILED TO CREATE THE RESOURCE DB2 IP PRD' THE CLUSTER NETWORK WAS NOT FOUND .
    DB2_INSTANCE=DB2PRD
    DB2_LOGON_USERNAME=iil\db2prd
    DB2_LOGON_PASSWORD=XXXX
    CLUSTER_NAME=mscs
    GROUP_NAME=DB2 PRD Group
    DB2_NODE=0
    IP_NAME = DB2 IP PRD
    IP_ADDRESS=192.168.16.27
    IP_SUBNET=255.255.0.0
    IP_NETWORK=public
    NETNAME_NAME=DB2 NetName PRD
    NETNAME_VALUE=dbgrp
    NETNAME_DEPENDENCY=DB2 IP PRD
    DISK_NAME=Disk M::
    TARGET_DRVMAP_DISK=Disk M
    Best regards.,
    please help me since am already running late with this installation to run the db2mscs utility to Create resource.
    Best regards.,
    Manjunath G
    Edited by: Manjug77 on Oct 29, 2009 2:45 PM

    Hello Manjunath.
    This looks like a configuration problem.
    Please check if IP_NETWORK is set to the name of your network adapter and
    if your IP_ADDRESS and IP_SUBNET are set to the correct values.
    Note:
    - IP_ADDRESS is a new IP address that is not used by any machine in the network.
    - IP_NETWORK is optional
    If you still get the same error debug your db2mscs.exe-call:
    See the answer from  Adam Wilson:
    Can you run the following and check the output:
    db2mscs -f <path>\db2mscs.cfg -d <path>\debug.txt
    I suspect you may see the following error in the debug.txt:
    Create_IP_Resource fnc_errcode 5045
    If you see the fnc_errcode 5045
    In that case, error 5045 which is a windows error, means
    ERROR_CLUSTER_NETWORK_NOT_FOUND. This error is occuring because windows
    couldn't find the "public network" as indicated by IP_NETWORK.
    Windows couldn't find the MSCS network called "public network". The
    IP_NETWORK parameter must be set to an MSCS Network., so running the
    Cluster Admin GUI and expanding the Cluster Configuration->Network to
    view all MSCS networks that were available and if "public network" was
    one of them.
    However, the parameter IP_NETWORK is optional and you could be commented
    out. In that case the first MSCS network detected by the system was used.
    Best regards,
    Hinnerk Gildhoff

  • Is TimesTen 11.2.1 compatible with Oracle 10g (Oracle 10.2.0.5.0)?

    Is TimesTen 11.2.1 compatible with Oracle 10g （Oracle 10.2.0.5.0）？

    Yes it is. Following version are supported for TT 11.2.1.8.x releases
    ■ Oracle 11g Release 2
    ■ Oracle 11g Release 1
    ■ Oracle 10g Release 2 (10.2.0.4.0 or above)

  • Does INNER JOIN work with Oracle 8i ? (ORA-00933)

    hi,
    I try to execute the sql:
    SELECT
    A0.FULL_NAME,A0.MANAGER_ID,A0.DEPT_NO,A0.TOP_DEPT
    FROM
    HR_ORG A0
    INNER JOIN
    HR_EMP A1
    ON
    A0.MANAGER_ID=A1.EMP_NO
    WHERE
    A1.NAME = 'michael'
    but I caught an exception:
    java.sql.SQLException: ORA-00933: SQL...(message in
    chinese)
    Does INNER JOIN work with Oracle 8i ?
    thanks.

    INNER JOIN syntax is introduced in 9i, it does not exists in 8i. You can rewrite your statement:
    SELECT
    A0.FULL_NAME,A0.MANAGER_ID,A0.DEPT_NO,A0.TOP_DEPT
    FROM
    HR_ORG A0
    , HR_EMP A1
    WHERE
    A0.MANAGER_ID=A1.EMP_NO
    AND
    A1.NAME = 'michael'

  • Oracle SQL Developer 1.2 – Automatic -  is compatible with Oracle 11g?

    Oracle SQL Developer 1.2 – Automatic - is compatible with Oracle 11g?
    Thanks in advance!
    -Babu

    So I'm taking it the question is -
    Is 1.2 Sql Developer compatible with 11g DB?
    The short answer is Yes. We are constantly adding new functionality and better support for the newer Databases. For Example to use the real time Sql monitoring that became available in 11g you will have to be on at least 2.1 Sql Dev. Is there some reason you don't want to upgrade to the latest Sql Dev? If not the current EA version then at least the current production version?
    Thanks,
    Syme

  • I want to know whats the release of jdeveloper compatible with  Oracle E-Business Suite 12.1.3

    i want to know whats the release of jdeveloper compatible with  Oracle E-Business Suite 12.1.3

    You can find this information on the Oracle Support site. It is the article with the ID 416708.1

Maybe you are looking for