Does Windows Server 2012 support Remote Desktop Client 6.1?

Hi,
Does Windows Server 2012 support Remote Desktop Client 6.1? IU can't find a link anywhere on the Microsoft site to confirm this!
Thanks,
Jim

this should help you
http://social.technet.microsoft.com/Forums/windowsserver/en-US/b664ddaf-6c11-49e2-8a69-0df3b8ef13a1/server-2012r2-rds-farm-with-xp-and-windows-vista-clients?forum=winserverTS

Similar Messages

Windows Server 2012 Standard - Remote Desktop Management service won't start

Dear colleges, I'm seeking your help in resolving a weird issue with Remote Desktop.
The Remote Desktop Management service gives the following error message any time it is attempted to start:
"The Remote Management Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
The Event Viewer error message is as follows:
"The Remote Desktop Management service failed to start. Error code: 0x88250001"
Whenever I connect to the server with RD I get error message that the Remote Desktop Licensing Server isn't configured and that the RD trill will expire in N-days. The server is up to date updates wise and has been licensed for 5 RD CALs. The server hosts DNS
server and has AD DS role installed, is virtualized to have one Hyper-V server.
I read some blogs about having both DNS and AD DS on one box is a bad sea and a root cause of the issue. Well, that very well may be, but for me that's an option as I'm not going to get a box to just host DNS. There should a solution to this as I shouldn't
only one suffering from this issue.
I also read about KB2871777 - Servicing stack update supposedly addressign this issue. Well, it's on my system and the issue is there too. :)
Will I loose ability to RD when the trial expires or it's just another misleading MS message that can be ignored?
How do I mend Remote Desktop Management service to start?
Appreciate your help!

Hi,
Thank you for posting in Windows Server forum.
Can administrators perfectly connect to RDS environment?
In meantime please check that you have properly configured and activated RD License role service and install RDS CAL on it. It might also possible that you have configured RD License server but it server can’t find it and giving you error due to certificate
also. Please check that you have properly configured certificate on your RDS Server. Try to install and update below hotfix for License related issue.
No RDS license when you connect to an RDS farm in Windows Server 2012
http://support.microsoft.com/kb/2916846
If you have configured both RDS and AD DS on single server then also you may find some error reading this. If so please try to setup both roles on different server and check the result. In addition to this, please check below articles.
What's New in Remote Desktop Services in Windows Server 2012
http://technet.microsoft.com/en-in/library/hh831527.aspx
Install Remote Desktop Services Failed on Windows 2012 Server
http://social.technet.microsoft.com/Forums/windowsserver/en-US/bbf47aa2-8ae5-4f22-9827-afee5a11417a/install-remote-desktop-services-failed-on-windows-2012-server?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

Installing Windows Server 2012 RC Remote Desktop (ISSUE)

Installing the RD Host Service doesn't work and I get several errors. Any Hints?

You cannot be serious. I approached your Microsoft "Gold certified" software partner 'Cancom Germany' with the following requirement:
- Need a Windows 2012 "Terminal Server"
- for 15 client devices
- currently no AD or other Windows servers installed
What do I get sold:
- Windows Server 2012
- 15 Device CALs
- 15 RDS device CALs
and the information that I need to setup AD and the RDS roles. So far so good.But I run into these error messages when setting up the RDS roles.
Now you are telling me that I need another server running just for the AD? Which I do not need for anything except for the internal requirement of the RDS services?
Please elaborate a bit more on the way to get it work on the same machine or suggest another solution (btw buying another license for the AD server is not a solution).
Totally agree with you. buying extra server just for AD or broker frustrated me. but I found a patch here
http://support.microsoft.com/kb/2799605
I don't know if it is too late, but hope it can help others

Does Multipoint Server 2012 Support Remote Connections?

I'm currently running Server 2008 R2 Foundation, and am considering an upgrade. I originally thought I'd move to 2012 R2 Essentials, but found that it only allows 2 concurrent users, and RDS is not available (what a joke!). Anyway, someone suggested
that I try Multipoint Server 2012, but from all I can dig up, I can't find any reference to VPN or RDS. I'm a very small (2 person) business located in rural north Georgia, but I not only have local users (two of us), but also two or more clients in
south Florida connecting to my server via RDS.
Does anyone know whether or not Multipoint 2012 will support RDS type connections from afar - i.e. not on the local network? I'd be very grateful for some clear concrete information about that.
Thank you.
Capt. Dinosaur

Hi Livi, thanks for your response.
"I saw your post on the WMS forums and it might be worth downloading the evaluation and giving it a try if you have the chance.
http://www.microsoft.com/en-us/download/details.aspx?id=35821"
Thank you, I do intend to do just that just as soon as I can.
"That said, as another poster mentioned in that thread, there are still some limitations with regard to not having your domain controller on the same machine as your RDS role. "
That, of course brings up another question in my mind; can Multipoint be in a Workgroup, so that it's not a domain controller? I have only one server box, and would like to keep it that way for both financial and spatial reasons. I simply
want to upgrade to the latest server technology with the version that fits my "NANO" size business.
Also, I've yet been able to find CLEAR information about Licensing Multipoint. I've found lots of places that tell me that I have to use OEM or Open licensing - whatever that means - but no explanation of what licenses are required and MOST IMPORTANTLY
how much do the bloody licenses cost. Can anyone enlighten me about that???????????
Capt. Dinosaur

Logging into Windows Server 2012 from Remote Desktop requires "Connect with Smart Card"; how do I disable this?

I am using pretty much the default setup. I cannot figure out how to disable this. I do not want to use smart cards.
Any ideas?

Does this mean you're trying to RDP from an XP box, therfore have the Remote Desktop feature on the server set to "less secure"? Sounds like thats what disables network authentication, prompting the Smart Card request.
If you simply click to login as a different user, you can login without a smart card, to include the same user as was being prompted for the card.
I expect if you choose the Remote Desktop feature requires network authentication on the server, the smart card requirement goes away, but you'll need to login from Win7 or newer clients. Not sure where Vista falls, probably okay too.

How to enable users to access windows 2012 through remote desktop client on windows XP SP3

Hi I have just installed Windows Server 2012 and trying to give access to the users. The users are on windows XP Pro SP3 remote desktop client (Shell and control version 6.1.7600 with Remote Desktop Protocol 7.0 support).
I have enabled the windows server 2012 remote desktop users through "control panel -> systems and security -> Remote access" for the users. When I try to connect to the windows server as administrator, it is getting connected.
But when I try to connect as other users I get the following message.
"To sign in remotely, you need the right to sign in through Remote Desktop Services. By default members of the Administrators group have this right. If the group you're in does not have the right, or if the right has been removed from the Administrators
group, you need to be granted the right manually."
Is there any other setting to be done to eanble the Remote Desktop for the users.

Hi I have just installed Windows Server 2012 and trying to give access to the users. The users are on windows XP Pro SP3 remote desktop client (Shell and control version 6.1.7600 with Remote Desktop Protocol 7.0 support).
I have enabled the windows server 2012 remote desktop users through "control panel -> systems and security -> Remote access" for the users. When I try to connect to the windows server as administrator, it is getting connected.
But when I try to connect as other users I get the following message.
"To sign in remotely, you need the right to sign in through Remote Desktop Services. By default members of the Administrators group have this right. If the group you're in does not have the right, or if the right has been removed from the Administrators
group, you need to be granted the right manually."
Is there any other setting to be done to eanble the Remote Desktop for the users.
Have you tried adding those users to the "Remote Desktop Users" group? It's in Active Directory Users and Computers and it's a Built-In group. Might want to give that a try ...
- JJ

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all
network devices. I can connect to the internet.
On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

Hi,
After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller.
Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
go through beneath article for more details.
1. Event ID 5719 is logged when you start a computer
2. Netlogon 5719 and the Disappearing Domain [Controller]
3. Event ID 1129 — Microsoft-Windows-GroupPolicy
Hope it helps!
Regards.

Does windows server 2012 foundation ed. support sharepoint?

does windows server 2012 foundation ed. support sharepoint?

Based on the feature set, yeah it would support SharePoint 2010, but I wouldn't recommend it. Server 2012 Foundation must be a Domain Controller or in a Workgroup, neither of which are good scenarios for a SharePoint installation.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

HT201068 In the Ap Store "Updates" window, it says that "Remote Desktop Client Update" was installed today. I never intentionally installed "Remote Desktop". How did it get there, Where is it on my computer, and How can I remove it? Thank You!

In the Ap Store "Updates" window, it says that "Remote Desktop Client Update" was installed today. I never intentionally installed "Remote Desktop". How did it get there, Where is it on my computer, and How can I remove it? Thank You!

I don't know if you have been there, but a very suspicious icon! (Like this one on a NSA satellite: http://b-i.forbesimg.com/kashmirhill/files/2013/12/Satellite-logo-for-spying.jpg) Yikes!
Are they after the French too?!? I thought we were allies?!? Wait a minute . . . I'm an American citizen with the Constitutional Right (which they vowed to uphold when they took their job!) of privacy!!!
What do you think of all this?
How did you find it in the OS?
Do I just trash it with "Secure Empty"?

Server 2012 R2 Remote Desktop Gateway. Most Simple and Secure Design For Small Environment?

We would like users to be able to connect remotely over the Internet from their personal devices to their primary Windows 7 workstation (a physical box on their desk) by using the Microsoft RDP Client For Windows, Mac, iOS and Android. There is no
plan to use RDWeb or Remote Apps, or VDI. Just plain remote access to their desktop PC without VPN plus a third party 2nd factor authentication product that can text them back a code to enter with their AD credentials (AuthAnvil or Duosecurity)
We do not have TMG or ISA.
We would like to get these services all running in a single server and be as simple as possible while still being very secure.
The recommendations I see seem to suggest putting the RDG in a DMZ with either a domain controller on a new domain with a one-way trust to your internal domain or else a read-only domain controller on your domain and then RD Session Host and License server
located on different servers on your internal LAN.
http://blogs.msdn.com/b/rds/archive/2009/07/31/rd-gateway-deployment-in-a-perimeter-network-firewall-rules.aspx
That sounds like a lot of separate servers and cost for not a lot of users in our environment.
Do we even need a separate session host server if there are no RDP sessions being hosted directly on the servers because the users are only being redirected to connect to their workstations and will never be using terminal sessions on the server?
Can the RODC or the Domain controller on new domain with the one-way trust be the same server as the Remote Desktop Gateway server and not separate servers?
What is the most minimalist way to set this up with good security when opening all the ports needed to authenticate with internal DC is not secure enough?

#2 sounds like we would need 2 Essentials servers and we will not have that.
We currently have Server 2008 R2 and have 2012 Standard licenses that are not yet used.
We have much more than 75 users total, but 75 is more than the number of users that will probably take advantage of using RD Gateway any time soon. It will probably take time to catch on.
If RD Gateway usage was to get super popular and more than 75 users were depending on access to it, then we could financially justify paying to buy all the CALs needed to run RD Gateway without Essentials. Right now, they are skeptical that it will
be worth spending much money on this and don't want to invest a lot of money up front.
My understanding is that if we have 75 or fewer users using RD Gateway then we need to by no CALs, just apply a Server Standard Edition License to the server, but if we had 76, we would need to turn off Essentials and buy 76 new CALs.
Or would we need to add 50 CALs to the 25 that automatically come with Essentials?
Also does "turning off" Essentials mean we would have to reinstall and redeploy the RDG or is it just a matter of enabling the RD license server and adding purchased CALs?
No, when you buy essentials you get the right to create 25 users that access the server, when you create the 26th user you will need to have 26 CAL and RDS CAL.

Server 2012 RTM Remote Desktop Connection Broker Role Won't Install

Hey guys,
I have been searching for and trying fixes for this for 3 days, and I've gotten no where. Thanks in advance for trying to help me out.
Here's the situation:
I have a brand new installation of the Windows Server 2012 Datacenter 64-Bit RTM from MSDN. This is my one and only server (just my personal one for home), so I'm using this single server to run all of the services that I need. After a fresh
installation, I added the AD and DNS roles and promoted the server to the PDC. Then I go to add the Remote Desktop Virtualization Services (the VM virtualization role). The installation fails, but I can't find any explanation as to why.
I've wiped out the OS and reinstalled from scratch at leat 15 times, trying various combinations, fixes, approaches, etc. including powershell, Remote Desktop Services Deployment, standard role-based deployment, etc.
Using the role-based deployment, I can get every 'Remote Desktop Services' component to install except the Remote Desktop Connection Broker. I've tried enabling RDMSUI_TRACING, but didn't get any information at all as to why it's failing. I also
cannot find RDMSDeploymentUI.txt log.
I've also tried to deploy this using Powershell using this command:
New-SessionDeployment [-ConnectionBroker] <string> [-WebAccessServer] <string> [-SessionHost] <string>
That particular item does provide some error messages, but they seem to complain about the Session Host not being able to install due to not being able to find the connection string key in the registry for the Windows Internal Database. However, I can
get the session host and every other component to install using role-based deployment, except the Connection Broker.
I've run an SFC scan, which found no issues. I've also tried applying the one update available in Microsoft Update, and tried it without applying that update (reinstalling between attempts of course).
I'm completely at a loss. Has anyone encountered this before? Any suggestions would be greatly appreciated. Is there a powershell command for just installing the Connection Broker that might provide some additional error information, or any
information at all?
I would greatly appreciate any help anyone could offer. I'm willing to try anything. Thanks for taking the time to read this.
Sincerely,
Dominick

Also Found this:
1. You try to install the Remote Desktop Connection Broker (RDCB) on a server that also has the Active Directory Domain Server (domain
controller) role installed. This configuration is not supported by Microsoft. You need to install the RDCB on a server that does not have this role installed. See: Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012 http://support.microsoft.com/kb/2799605
2. If you don’t have the Active Directory Domain Service install, this issue might be caused by the Windows internal database (WID) that
the connection broker installs and the Windows Update KB2821895. If you have KB2821895 installed, unfortunately you can not uninstall this KB. Try to install the Remote Desktop Connection Broker (RDBC) role on a server that does not have this Windows update.
Note: There is currently no official communication from Microsoft that here is an issue with RDBC and KB2821895. However, try the RDBC installation
without this KB and see what happens.
For more information, Refer below link...
http://fabrikam.wordpress.com/2013/07/15/connection-broker-installation-failedremote-desktop-deployment-issues/

Windows Server 2012 Pooled Virtual Desktop collection GetVMstate issue

I am trying to create a Pooled Desktop collection with my Powered off VM and it errors out The
virtual desktop must be in a stopped state: Could not identify the state of the virtual desktop. Ensure that the RD virtualisation host server is available on the network and the virtual desktop is shut down
In the debug logs it shows.
Component RdmsModel: GetVMstate for Vm Win7_BaseVM failed with error 16386
Component RDExceptionHandler: Could not identify the state of the virtual desktop. Ensure that the RD Virtualization Host server sunflower-1.HYPERQA.NUTANIX.COM is available on the network and that the virtual
desktop Win7VMSF is shut down.
Please help on resolving this GetVMState issue.

Hi Krishna,
Thank you for posting in Windows Server Forum.
When you are configuring RDVH initially, please see that you have meet prerequisites. Remember that you need these pre-requirements:
• Database based on SQL Server 2008 R2
• Static IP Address for all Broker
• Round Robin DNS
• All RD Broker must be members of AD Windows Group (es. RDCB Server Group)
• The group must be insert into SQL Server as sysadmin ONLY for the DB creation. After that DB will be created give the db_owner permission only for their DB
More information.
Windows Server 2012 R2: Unable Add New VDI Template
In addition, we need all RD Broker must have the same SQL Native Client as main SQL Server (es. SQL Server 2012 SP1). The Connection Broker server's computer account MUST be a member of the local administrators group on the Virtual Host (RDS Host) machine and
then reboot the server. Finally check the result.
Windows Server 2012 Virtual Desktop Template Issue
Hope it helps!
Thanks.
Dharmesh Solanki

Windows Server 2008 R2 Remote Desktop - The requested session access is denied

Hi, I have been using Windows Server 2008 R2 since it was released, and have 100 servers up and running. I configured Allow Remote Desktop on all of them and have been able to connect to them and manage them via RDP since then. I also have two servers configured as Remote Desktop Services.
That was up until yesterday. Yesterday afternoon I started getting the The requested session access is denied. I managed all Terminal services via Group Policy and have three users entered.
I am connecting to the servers via Windows XP SP3 and Windows 7. Both clients have been updated to the latest Remote Desktop Services client.
I have been searching for the answer, and I am not finding it.
I have also tried KB954369 without any success.
Thanks,
Brian

Ok, from my trials and tribulations and discussions with Microsoft I have identified the following;
Assumptions;
A. My terminal server is in domain widget
B. All the users are in domain contoso
1. I had the Terminal Server configurured with a specific Login, which would launch a specific application only and not give them any desktop functions. Wiht this configured this way, I get the error I wrote about.
2. If I turn the specific login off, then I can login normally and perform the functions as Administrator that I need/want to do.
3. Microsoft said to configure the Terminal Server with Single Sign-on. I did as instructed and went thru all the steps, however because my terminal server is in domain widget, the users get prompted twice each time for login. Once on the website, and then again as the application launches. Microsoft said that the users needed to Remote Desktop Client 7.x or the self-signed certificate that I have has to be included in the domain contoso certificate authority so that they will not be prompted for the second sign-on.
4. Conclusions - I need to have a chat with our enterprise security team about including the self-signed certificate in the contoso certificate authority. I need to also work on my RDWeb website so that it meets our company standard look.
Here are the links that Microsoft provided;
http://technet.microsoft.com/en-us/library/cc772108(WS.10).aspx
Enable RDC Client Single Sign-On for Remote Desktop Services
http://technet.microsoft.com/en-us/library/cc742808.aspx
Blogs -
http://blogs.msdn.com/rds/archive/2007/04/19/how-to-enable-single-sign-on-for-my-terminal-server-connections.aspx
http://blogs.msdn.com/rds/archive/2009/08/11/introducing-web-single-sign-on-for-remoteapp-and-desktop-connections.aspx
http://blogs.msdn.com/rds/archive/2009/06/05/publishing-in-windows-server-2008-r2.aspx
http://blogs.technet.com/pfe-ireland/archive/2008/09/05/windows-server-2008-terminal-services-presentation-virtualisation-and-windows-xp-clients.aspx
I hope this help you in your troubleshooting.
Brian

Do windows server 2012 support remoteapp with remotefx vGPU feature?

our customer need use adobe photoshop with remoteapp.
my question is,how to make remoteapp use vGPU feature?

It's impossible.
Note, RemoteFX vGPU cannot be used with a Remote
Desktop Session Host (RDSH) or RemoteApp deployment.
More information:
Understanding and Evaluating RemoteFX vGPU on Windows
Server 2012 R2
http://blogs.msdn.com/b/rds/archive/2014/06/06/understanding-and-evaluating-remotefx-vgpu-on-windows-server-2012-r2.aspx
I just wondering even GPO Remote
Session Environment - Use the hardware default graphics adapter for all Remote Desktop Services sessions doesn't
work when installed on bare metal. Just look at this:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/8a6c12a6-a4ee-428c-a898-5d45bcb0d129/using-gpu-in-windows-server-2012-r2-with-rdsh-role-installed-on-a-hardware?forum=winserverTS

Server 2012 RDS - Remote Desktop Connection Broker Client failed to redirect the user domain\username. Error: NULL

Seeing the error listed here.
The Remote Desktop Connection Broker server could not enumerate the targets for the provider named NULL from the database.
Pooled virtual desktop collection name: NULL
Error: Error code: 0xFFFFFFFF.
Broker and Hyper-V are on the same physical machine.
Any ideas on where to start troubleshooting this?
Used the happy wizard to create everything, and got no errors.
I have created a small pool collection, and given rights to domain users. Everything "looks" good.

I have the same problem.
(Making this long hand for those who come after)
I have installed SQl Management Studio Express 2012 SP1
http://www.microsoft.com/en-us/download/details.aspx?id=29062
(You only need the one file "SQLManagementStudio_x64_ENU.exe")
Ran this as Administrator
And typed in the Server Name field
\\.\pipe\MICROSOFT##WID\tsql\query
Then hit connect.
Expanded Databases (+sign)
Expanded RDCms
Expanded Tables
Right Clicked on rds.target, select Edit top 200 rows
Right Clicked and copied, then pasted this into a notepad file on the desktop (As a backup)
Right Clicked and selected Delete to delete the row with the data in it (and PoolID was set to Null in this row)
Did the same for rds.pool
Manually added Remote Desktop server into the MEMBER OF tab of
“Windows Authorization Access Group” via Active Directory Users and Computers. As this domain was Windows 2003 Native when the RDS server was first installed.
Rebooted server and same issue>
Checked SQL again and rows had come back.
Is that what you meant by "delete
the rds.target and rds.pool with pool id = NULL"?
Not a SQL guru, so any help appreciated.

Does Windows Server 2012 support Remote Desktop Client 6.1?

Similar Messages

Maybe you are looking for