Does wire trick work on Palomino?
Hi, Please check what I have in my sig below. I guess I'm not sure what else I can do with my palomino. Will I benefit from doing the wire trick? I can set my fsb to 140-141 and get ~1.8GHz, multipier auto, but anything above that and it just doesn't POST. Should I think about selling my chip and getting a T-bred B or a Barton? I read about a Barton being bumped up 500MHz. Or should I just wait until November when DOOM 3 comes out and the new athlon 64's.
Thanks,
Matt
no its a case ofolder way fill and paint bridges
xp 2500 is best bang for money right now
Similar Messages
-
Used the wire trick for my xp1900+
i did it, but don't know if it work!
also i have the insane Thermalright SLK800 on my k7t266 pro2!
temps drops from 45 c to 37 c (idle temps)!
load is 42 c!
cpu is still using 141 FSB and the multiplier is set to 'auto'
cpu speed at 1700mhz.
last night i did this (after the wire trick):
i chose FSB 133 and a multiplier of 14.
system can boot,but WITHOUT the GF4 Ti!
no screen activities!
i reset the BIOS, everything worked again.
please tell me how do i change the multiplier?
which setting is for my system the best you think?
is this right? if my system can't boot with the multiplier of 14, does this mean that the wire trick worked???
what about this? i choose FSB 100 and set the multiplier to 14 for test??
i used one thin speaker wire for the trick.
HELP!
Thanx!via doesn't have the agp/pci lock!!! not to sure about your board but i would imagine it has the 1/5 divider in it!! so at 166 everything is in spec. how high can you put the fsb before the 1/5 is no more?? i have know idea
i read a few reports about the kt3 ultra 1/5 is good till 200fsb...if that is true i wouldn't think the kt400 would be any different. but i don't know if that is true or not about the 1/5 still in at 200fsb
and also their isn't a program out there where you can force a agp/pci lock...powersrtrip is a videocard utility for overclocking your vidcard and tweaking driver settings etc. -
[AMD] 3000+ Barton and wire trick
Does anyone know why the 2800+Barton with the wire trick worked for the 200FSB but the 3000+Barton doesn't? I tried with the 3000+ and it won't go to the 200FSB. I then tried the 2800+Barton again and it works. What is with this 3000+? I figured that if I took the 2800+ to a 3200+ then I could really get the 3000+ OCed. Did they do something to the 3000+ so that it wouldn't work?
At least I have a system that is running. I ought to be thankful for that. I have the 2800+333MHz and 2x512mb of Kingston 333MHz memory and an old P3 800MHz w/ 512mb. system. All I need is another socket A motherboard and with the parts from the P3 I will have another good system. The P2 is still running and is maxed out. It can't be upgraded any more. So I'll build another AMD system that will run just as well as this one. PLUS I'll start folding with that one also.
-
Hello all.
I am having a problem. I can't get the computer to post any time I changed the muliplier to increase the fsb. I did the wire trick and it seems as if nothing has changed. It IS possible that the wire broke when I pushed the CPU in the socket, but I don't think it did. My "stock" mulitplier should be gone once the trick is applied, right?
For example, I tried to run at 166fsb and 12x multiplier- no dice...well first of all which wire trick?.wrapping the pins or
u wire pushed in zif soket?........will the system post up when cmos has been cleared?....if so go into bios and check mhz.........should be 1995 at default settings.....if it shows this.........then you did not unlock it correctly......by default the cpu will go back to H/W..and if unlocked correctly the system will be showing about 600 mhz or so.....clearly using the 6 x multiplier........ -
Wire tricking the thrbrd xp to unlock multipliers
on most msi mother boards a new xp thrbrd,not the older palaminos
[if the core of your cpu is a rectangle its a thrbrd
if its a square then its a palamino and this does not work with them
you can also go here http://www.overclockers.com/tips00173/]
that has a default multiplier of 13 or over are not unlocked,try to change the multipler and it will not boot you will need to clear the cmos
Clear CMOS Guide
you can get around this with the WIRE TRICK
Just take a small peice of wire and connect the 2 pins that go in these holes.
AND BY THIN I MEAN ONE STRAND OF WIRE FROM SAY A SPEAKER LEAD
when fitting the cpu take care and do not force it
you will now be able to select multipliers up to 12.5
warning if you select 13 or more it will not boot ok,you have been warned
an if you mess it up dont come crying to msi or me
as an alternative you can give this lot 15 dollars but it just does the same thing
http://www.overclockercafe.com/Reviews/other_misc/Speed-Strip/index.htm
pm me if you wish to send me what you savedlocked: All week 43 (0343) and later Bartons and Thoroughbreds and most (but not all) post week 43 Durons and:
AQZFA 0335 MPMW
AQZEA 0338
AQXCA 0340
AQXEA 0341 MPMW and VPMW
AQXFA 0339
AQXFA 0340 MPMW
AQYFA 0340 TPMW and UPAW and WPAW
AQYFA 0341 TPMW
AQYFA 0342
AQZEA 0341 TPMW and RPMW and RPDW
AQZFA 0339 UPMW and TPMW
AQZFA 0340 XPMW
AQZFA 0341 TPMW and SPMW and XPMW
AQZFA 0342 TPMW and UPMW (multiple confirmations of both locked and unlocked chips)
AQZFA 0341 VPMW
Thoroughbred JIXIB 0339 / 0338
Thoroughbred AIXHB 0340 UPMW
Thoroughbred AIXHB 0341 SPMW
unlocked: Most made before week 35 and:
AQXFA 0340 MPMW and TPMW and UPMW and VPMW
AQYFA 0340 UPAW
AQZEA 0339 UPMW
AQZFA 0339 VMPW
AQZFA 0339 UMPW
AQZFA 0340 UPMW and SPMW and MPMW
AQZFA 0342 TPMW and UPMW (multiple confirmations of both locked and unlocked chips)
as above newer cpu are locked and this will not work with them at all -
A quick question- can I use a very thin wire using the wire trick, or does it need to carry a lot of current? I took apart some monstercable speaker wire, which is 100% ofc. One strand is very thin, is that a problem? We're talking hair thin almost. I'd like to use this unless it would be a problem.
Long as you're talking how you did it ...
How exactly did you get the wire in place? I tried this for a while last nite, maybe I'm just getting old, but I couldn't quite get a strand of wire to sit in those two holes on the motherboard... just curious if there's any good trick to it... -
Does Cisco WAP4410N work as repeater for Linksys E4200 ?
Does Cisco WAP4410N work as repeater for Linksys E4200 ?
Hi,
i have Linksys E4200 and I need repeater for it ...
Can anybody help me with this issue ?
BRThx for answer
I tested it and it works as Wireless Client - computer connected by ethernet wire is OK, everything works (DHCP etc)
but when i turn on " Allow wireless station to associate" in WAP4410N settings of "Wireless Client/Repeater" it doesn't work at all
I mean clients on wireless side and on wire side too ( DHCP doesnt work , there is no communication ) -
Does Front Row work with PowerPC G4?
Does Front Row work with PowerPC G4? Where can I get it?
There are ways, but it has limited ablities since you don't have the IR based remote needed. There is a "hack" of sorts which tricks front row to install on other Macs. I have it on my Power Mac G4 and my ibook as well. Just do a google search.
There is nothing illegal about the hack since you download the free update from the apple website. All the hack does it make the installer think you have a iMac or Macbook Pro. -
Why does abode not work on my galaxy tab2
Why does abode not work on my galaxy tab 2?
The games dont load they just say I need to update to the latest version or say that it is not compaterble with it.
-
Why does sound not work on my Mac Air?
Why does sound not work on my Mac Air --all setting seem okay. OSX 10.9.2 operating systyem.
Open System Preferences > Sound > Output
Make sure the coorect output devices is selected and the Mute button is not checked. -
I added a contact to my iphone 4s and when I did a sync manually it is not showing up on my MAC in address book - please help....I checked off sync all contacts in iTunes - does it only work one way from computer to phone?
Is it because the new itunes looks different.
View > Show Sidebar
Then it should work just the same as on your old computer. -
how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon
To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry. If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.
-
Why does Adobe sendnow work and the newest and greatest Adobe Send does not work?
Why does Adobe sendnow work and the newest and greatest Adobe Send does not work? I wasted about 8 hours on trying to get Adobe Send to upload 269 files that amounted to 469MB. When it did not work I made a zip file and after a lot of wasted run time that did not work. The first situation gives little indication of when a file is loaded compared to Adobe SendNow. In both cases with Send it failed with a message like only the first 50 can be loaded. When I went and looked none of them had been loaded. With the zip file (I wanted to hide the individual files so they would not be counted) it appeared to work but very slowly and finally said it was done and I went and looked and it had done anything for oever 2 hours except a false "I'm runninng" indication.
Thus, I took a chance with Adobe SendNow and it works great. It never gave me a limit on the amount of files nor on the size of the complete job. It shows me one file at a time when it has finished with the file uploading it. SendNow has never given me any problems.
Why woiuld you want to change the program from SendNow to Send without the newest program being the best, fastest, user friendly program of the two? It just doesn't make sense to me. I suggest that Adobe keep SendNow working until Send is fixed. I would also suggest that SendNow and how it looks be kept, called Send, then modify Send one thing at a time until you get it to the point you need it to be for Acrobat. I have heard nothing good and now I have experienced it that Send is a piece of junk. I wasted most of my work day on giving Adobe the benefit of the doubt to find out I made a very bad decision to trust Adobe to make good decisions on the transfer of a function to another place .... both Adobe's responsibility.without making it painless for your customers that totally rely on you. Don't throw away customer confidence as it is very hard to get it back.Funny how you answer to "troll". (What's your handle on AT&T forums?)
Yep! Verizon living up to it's contractual obligations by not releasing updates. Caveat emptor!
I think there are some reasonable expectations here to keep customer's happy. When one carrier offers upgrades there is an expectation the same will happen across all the carriers. We have seen that except Big Red.
Verizon could have said the update is in MS court months ago and stilled the voice of the disgruntled, or at least redirected it, but instead chose to be silent. Not for market share but for partial blame I think.
We will have to agree to disagree since you only see Terms & Conditions and I, see customer satisfaction. -
When I am in safari, I try to bookmark a web page and it is not doing it, it worked before I updated to the ios6 version, does any one know why ? It pulls up the screen to save it but then it is not showing up on the bookmark drop down menu, it continues to show the standard google,iPad user guide, yahoo....
hello sofg777, when you're at a page you want to print try to press ctrl+P and select a different printer than the Microsoft XPS Document Writer which seems to be set as your default printer in firefox at the moment.
-
Remote.app (version 2): Does it still work in iOS7 or will I be automatically updated to version 3?
That is basically the main question I've come to ask (with some side commentary in parenthesis below).
After trying out iTunes Remote App version 3, I saw that it scrambles playlists (such as Recently Purchased), which makes my playlists worthless. For example, using Remote.app, it's no longer possible to simply play the songs you bought over the last week at the iTunes Store using the Recenlhy Purchased Playlist. Since I buy a lot of music through the iTunes Store, I naturally want to listen to what I just paid for, just as I could using Remote.app version 2.
But it's not just the Recenly Purchased playlist, it's all my playlists. Through the last decade, day in and day out, I've carefully orgnized hundreds of playlists that I've very crafted, song by song like old mix tape casettes.
They payoff for this work has been enormous. Since starting with mp2 in 1995, then mp3 and continuing through to the thousands of dollars I've spent purchasing songs through the iTunes Store and tens of thousands on iPods, iPhones, iPads, and computers—I've been able to make music match whatever mood or music was juuust right for the moment, making for great moments and memories with friends and families. For some artists, I always want to hear their latest songs first or I want to to hear top rates songs first. Other lists are about creating a particular mood for just about any occasion. I can even shift the mood in the room with the right music list. It's really been fantastic the memories and moments I've been able to set the tone with the right song, and most of this has been not the song itself, but the flow of music I've created by orgnizing music lists. That's a lot of work I've invested. So the order of the songs matters a lot to me, especially the very first song that starts that list. That's the song I want to hear first, not somewhere in the middle.
As of Remote.app version 3, these carefully crafted songlists are scrambled, making the App worthless. When I first noticed this I couldn't believe it, must be a bug. Nope, no bug, by design I found out. It's like when Lucy pulls the football away. It's mean spirited to take back features you've sold and promoted and people have grown to rely on in the workflow of their lives. So I downgraded back to Remote.app version 2.
((Actually, they're not really technically scrambled, they're actually presented in alphabertical order, which I think is really the same thing to me. Think about it: listening to an artists work alphabetically by title is really the most random and completely scrambled way to listen to their music. Or if you don't want to listen to them alphabetically, you can have them shuffled. Those are now the only two choices. Either way, the lists are jumbled, and like iTunes 11, several of the most powerful features have been taken away. In this case the exact thing that's missing is that the iTunes Remote no longer reflects the sort order of iTunes playlists.
I don't know if this is a quiet, update-by-update shift away from our playlists and towards iTunes Radio or not, but I would think so. Why else would you make it less powerful. To quote Merlin Mann Apple tends to "fire a warning shot" feature wise before taking something away. The Finder has gotten less and less powerful in finding files and folders by their name and size through the last decade.
I'm now noticing the same thing with iTunes, it's becoming more difficult to find the currently playing song. In iTunes 10, Go to Current Song would open the folder containing the list of the currently playing song, highlight and move that list to the top of the left column and then highlight that song. In iTunes 11, Go to Current Song will only highlight the folder that contains that song and nothing more. At that point you're on your own to hunt town the currently playing song. This feature has been broken—on purpose I suspect.))
SO—I don't want to be forced into Remote.app version 3 and have my playlists scrambled on my iPhone and iPad. Is there anyone who knows the answer from first hand experience?
If customer loyalty is as important to Apple as it should be taking away features in iTunes and Remote app will only drive old customers away.
Thanks!!
DavidI like that I would be able to maintain my iPhoto library data for Faces and Places in Aperture, but am concerned that when the iPhoto library is "upgraded" for Aperture, and I decide I don't really need that program, the upgraded library won't work with iPhoto anymore.
The iPhoto library isn't changed in any way by Aperture. Aperture will import the Library and you can choose to copy the files to the Aperture Library or reference them within iPhoto. As long as you don't delete files from the iPhoto Library via Aperture (which you could do if you choose to Reference) there is no impact on iPhoto
Will I still be able to use iPhoto to access and organize my library, or will it be forever converted for use with Aperture?
They are completely different libraries.
Recently, iPhoto bugs make Events show up multiple times in iTunes when syncing for iPhone and iPad.
Fixed in the 9.1.3 update.
Will I find a better user experience with Aperture, or does it also use the single file library and suffer the same struggles iPhoto users have been seeing lately?
Like iphoto, Aperture can use the "single file library" or it can use a Referenced Library (just like iphoto can). Note that using a Referenced Library offers not a whit more in terms of features or capabilities. It's file storage plain and simple. Nothing more.
No you won't see the "same struggles iPhoto users have been seeing..." because Aperture is an entirely different allication.
But you my see Aperture or Lightroom struggles
Regards
TD
Maybe you are looking for
-
LASERJET 100 MFP M175MW scanning legal size document problem
I am on a Macbook Pro, running OS X 10.8.5. I am also using the HP Scan software 4.0. I am having problems scanning a Legal Size document. It always cuts off the bottom portion, acting like it was only us letter size. After loading a document onto my
-
I recently copied a solution from one dev box to another. After pushing through a handful of other errors I hit a wall with this one. Any hints as to the human translation would be appreciated. The solution works on the original box. Also if there's
-
Hi Gurus, Kindly provide the list of important transcations for creating reports related to 1) DMS 2)ECM 3)CAD Integration. Thanks, Paddy
-
After buying new Windows 7 laptop can't import Real video files
I've been using the Real Plus to convert videos to iPod format for years. Recently bought new laptop with Win 7, reinstalled Real Plus, which captures and converts video. Can play it on Realplayer. But even though it is an .m4v file won't import
-
How do I change the default spelling dictionary to UK?