Does WLC require a reboot after configuring SNMPv3

I am going through WLC 7.0.116 configuration guides and it states "reboot the controller so that the SNMP v3 user that you added take effect" as last step of configuring SNMP on WLC.(Even 7.3 config guids say the same)
http://www.cisco.com/en/US/customer/docs/wireless/controller/7.0MR1/configuration/guide/cg_controller_setting.html#wp1117056
I know without rebooting, I can added WLC to WCS using SNMPv3. Not sure what's the importance of a reboot WLC after configuring SNMPv3.
Could someone shed some light on this
Regards
Rasika

CSCua09707 Release Notes on 7.0 Trains list SNMPv3 needs reboot - Incorrect
Release notes on controllers for 7.0, 7.2, 7.1 list SNMPv3 needs a reboot. This is not the case in any of the 7.0 versions.

Similar Messages

Why does Firefox require a reboot after uninstallation?

Basically, my problem was already asked here: https://support.mozilla.org/en-US/questions/916857
But that thread is marked as "solved", when in fact this problem is nowhere near being solved, so I am asking it again in a new, "unsolved" thread.
In former times Firefox never needed a reboot, and it does not make any sense because no Firefox-related file should be in use at the time of uninstallation. (Forget about updating in my case; I am doing a clean uninstall, and Firefox insists in rebooting anyway.)
Windows reboots due to software uninstallations are generally only required in the following cases:
* If files that belong to Windows are being modified. I hope Firefox does no such thing...
* Part of the software being uninstalled is still running, so that its files are in use. However, I completely closed Firefox and even used the task manager to make sure no firefox-related processes were running.
Some applications (i.e. Adobe Reader) install fancy "Speed Launchers" that are loaded at boot time and stay resident in memory. Unless these processes are manually killed before uninstallation, they may also be the reason why a reboot is necessary. However, Firefox should not do such a thing.
To summarize it, the question is: '''Which part of Firefox is running during uninstallation so that removal of the corresponding files is required?
Generally, I consider this a very bad software behavior, one that I would expect from some commercial software producer who wants to install his speedlaunch or logging stuff on my computer, but not from a free project like this one.
Firefox Portable does not do this, easily proving that technically it is not necessary. Earlier versions of Firefox also refrained from doing such a thing.
A piece of software requesting a reboot without good reason is what I consider a bug.

Aw, c'mon. Writing to the Windows registry never requires a reboot. This is ridiculous.
And Firefox did not need that bad behavior up to version 8 either. Why now?
This is not a Windows issue. You cannot alter files in Linux either if they are currently locked. The thing is that there is no sensible reason for any Firefox-related files to be locked at uninstallation time, which is why there should be no problem removing them.
I do not mean to rant, even though I am disappointed by this new behavior and would like to have it changed, but the least thing I really would like to know is exactly what is causing this. Why have the new versions of Firefox been programmed to require a reboot? Exactly which files need to be removed or changed that cannot be removed/changed during regular uninstallation, so that their removal/change needs to be scheduled for the next restart of Windows?

DCP in Adobe does it require more steps after export ?

DCP in Adobe does it require more steps after export ?

Provide the name of the program you are using so a Moderator may move this message to the correct program forum
The Cloud is not a program, it is a delivery process... a program would be Photoshop or Lighroom or Muse or ???

Does PerformancePoint require Kerberos to be configured?

Hi, a relatively simple question..
I have a 2010 web app configured and have tried to implement Performance Point. I'm running into a few errors.
I've created a new web app and it still didn't work, so I went ahead and configured Kerberos on the new web app. This seems to make it work OK.
I didn't realise Performance Point required Kerberos? or does it?
Thanks!

PP doesn't specifically require it, but access to back end data sources certainly may. Plus, Kerberos will improve security and performance.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Why does my Iphone keeps rebooting after shutdown

Everytime I try to shut down my i phone, it shuts down, but keeps rebooting, is anyone else having this problem?

Any New developments / suggestions ?????????????
When USP charging cable is connected to both the live wall charger and iphone,
the iPhone will succesfully 'Slide to Power Off'.
When the USB cable is not connected the following:
1. Hold down power button until "Slide to power off appears".
2. Slide the slider.
3. Iphone gets the spinny wheel.
4. Screen goes dark for a second.
5. Apple logo then appears and the iphone eventually turns back on.
6. No Apps are installed on this 4S.
7. Restored on iTunes several times, No change.
8. Changed USB Cable, No change.
9. Cleaned Connector port w/ brand new, Clean, soft tootbrush, No change.
10. Blown clean air into the connetor, No change.
Any New developments / suggestions ?????????????

Why does my 5s lose connection and require a daily reboot after charging overnight?

Wondering if anyone knows why my 5s loses connection and requires a daily reboot after charging overnight? I have the latest IOS 8.1.

this could have countless reasons but it might be your to far from router your router might be haveing electrical problems or your ipod is trying to join to many networks

System unstable and requires reboot after 24 hours - HELP

I did a clean install of Leopard twice and the same issue appears. The system becomes unstable and requires a reboot. Mail doesn't function correctly and Firefox gives an error, "Another copy of Firefox is running. Only one copy can run at a time'.
The only option at this point is to reboot, however the system hangs on shutdown.

Sorry for the delay and thanks for the response. what I mean by unstable is that the system will not perform as expected. The problem seems to be growing however. It use to only occur after 24 hours of up time. Now it seems to occur after the system goes to sleep. Twice I have put the system to sleep and each time when it wakes, I can not do anything. If I click an application Firefox, Yahoo, iChat, Mail, etc it will not respond. Forcing a quit on the application does nothing. Each time I have been forced to bring the system down hard. -Any help is appreciated.

TS4080 apple thunderbolt display image on display intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys. Rebooting by pressing the power button resolves issue.

My apple thunderbolt display (which I purchased 1.5 years ago; OS 10.7.5 Mac Mini) intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys, so am thinking it is a hardware problem with the display. Rebooting by pressing the power button turns the screen back on, but the same phenomenon has occurred several times. Could this be a software issue, or do I need to have my display repaired? Your feedback would be appreciated.

Hi ED, tough to tell, but it does sound like it's waking with the bonk, just not displaying.
Long shot but...
I wonder if it's a variation of this, of which I've seen many different symptoms...
Resolution
Move the mouse or trackpad cursor over the center area of the login window so you can see the user icons. Click on the icon of the user that you would like to login as, type in the user's password, and press Return.
If the login window is configured to show only the name and password fields, type in the user's name and password into the fields, and press Return (even if you cannot see the rest of the login window).
Additional Information
This issue will not occur if the display is not sleeping when the account is logged out. Use the steps below to confirm that the account is not configured to log out automatically while the display is sleeping:
1. Open System Preferences > Security & Privacy > General. Click the padlock to unlock the preference pane and enter your admin password. Click the Advanced button at the bottom, then see if the option "Log out after N minutes of inactivity" (where N is the number of minutes) is enabled.
2. Open System Preferences > Energy Saver and configure Display Sleep to occur after the account is logged out, by dragging the slider to a number of minutes that is greater than N was set to in the previous step.
Important: If automatic log out is not needed, disable "Log out after Nminutes of inactivity" in System Preferences > Security & Privacy > General. This will also prevent the issue.
http://support.apple.com/kb/TS4135?viewlocale=en_US

TS1398 After updating to ios 6 my iphone 4 would no longer connect to my home wifi. At work we have a free wifi connection that does not require a password. However my wifi at home is password protected. I have the right password. It works on my ipod touc

After updating my iphone 4 with the ios 6 update. My iphone would no longer connect to my home wifi that is password protected. I know that I have the right password entered in. At work we have a free wifi connection that does not require a password and I can connect no problem to it. My ipod touch has no problem connecting to my home wifi. It is a 3rd gen ipod and does not have the ios 6 update on it. Please help!

I'm having the same issues. Started when I upgraded iphone 4S and ipad1 to 5.1.1. Wife's iphone 4g on 4.4.2 has been ok. I've forgot the network on both devices and restored the iphone, none of which changed the issue. I've upgraded to ios 6 on the iphone 4s, problem still persists.
One thing that will help for a time: go to your router and change the wireless control channel. When I first did this I got full connectivity for about 48 hours... and now the problem is back. I'm now changing the wireless control channel every 12 hours, which is a pain but at least keeps me connected. I've tried a few other solutions that are out there and that has been the best one so far.
to do this on a motorola router: type 192.168.0.1 in your address bar.
username: admin and password:motorola if you have not changed the factory defaults.
Click on the word "wireless" and look for the "control channel" field. This may be set to auto or to 1, try changing it to 6 or 11 (preferred) or any other channel.
The control channel can cause static in the wireless system IF there are several networks nearby that are on the default setup.
There is a fair bit of buzz about this issue out there, some other things I've seen:
This is a hardware issue. Go to the store and have your wifi antenna checked, some users reporting that they get free replacement devices.
Check against other wifi networks that require a password (this is next for me). Logon to those networks and surf until your wifi stops. If your wifi connects to the internet but stops responding, then this is a software (or hardware) issue and apple needs to step up. Some are claiming this to be the case.
IF you connect and stay connected/on the internet on another password protected wifi, then the issue is with your router. this is where things get cute.
Comcast may tell you to update your firmware. Motorola may tell you that your cable provider is the only one who can push through firmware updates. Comcast may tell you that you are not in an area that is being updated. It's unclear if they say that to all customers, or just those who have purchased cable modems and aren't renting them from comcast.
Good luck, more to come if I figure out anything else, and please post any solutions you may find.

I want to upload a Banner to my iTunes U page. The banner file has all the requirements like as, kind, size, frame, and etc. Infortunately, I could not upload the file. It does not show in Provider Page Configuration or the preview. Someone could help

I want to upload a Banner to my iTunes U page.
The banner file has all the requirements like as, kind, size, frame, and etc.
Infortunately, I could not upload the file. It does not show in Provider Page Configuration or the preview.
Someone could help me?

Sounds like a driver issue. I never tested in bridge, so I could be wrong. But it sounds to me that when you are connected to that screen, your settings are not set to the full resolution of that screen.

My MacBook Pro Core Duo from 2006 shuts down randomly requiring frequent reboots to the point I had to abandon doing any project or anything on this MacBook Pro. Same thing occurs with the iMac dual core from 2007. MacBook battery replaced.

My MacBook Pro Core Duo from 2006 shuts down randomly requiring frequent reboots to the point I had to abandon doing any project or anything on this MacBook Pro. Same thing occurs with the iMac dual core from 2007. MacBook battery replaced. Is it internal battery for both, new logic board required, bad hard drive, or bad RAM?
Help.

Run an Apple Hardware Test using the original installation disk that has the AHT instructions on it.
Try SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
It is possible that you may need a new PRAM battery.
Ciao.

After installing or uninstalling a program or after installing a Windows update requiring a reboot, I lose Firefox and have to reboot a second time.

Am running VistaSP2 on a Dell E520 with a Kaspersky based AV program. Ever since I installed the latest version of Firefox I find that when I install or uninstall a new app (e.g. Adobe Acrobat X Pro, Skype, Windows Messenger, etc.) or when I install an update from any source that requires a reboot, I find that Firefox will not start. Even the UAC confirmation window will not open. I have to perform a second reboot to be able to open Firefox. I have uninstalled Firefox and reinstalled it and it does not help.

Which is it, hanging or crashing, or both?
* https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_hang-at-exit
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.org/en-US/kb/Firefox%20crashes

Does connecting require an xserve reboot?

Apologies if this is a simple question, but I actually haven't found a definitive answer yet. Assuming I've got an xserve raid that's partitioned and formatted hsfs, can I power it down, connect it to my xserve via FC, power it on & have the xserve mount it automatically like it would a firewire drive?
I.e, do I have to reboot the xserve I attach the array to in order to get it mounted?
Thanks!

It should automatically mount with no reboot necessary.
Only if you change RAID sets that are attached does it sometimes require a reboot.

Windows Server 2008R2 - Adding additional New Fibre Channel Storage will I need to reboot after mpclaim?

I am replacing an MSA 1500 Fibre Channel array with an MSA 2040 on a live system. The new array has been installed physically and connected to the switch fabric.
Both arrays are connected to a common switch fabric. The new array can see all the physical hosts on the SAN, and I have managed to setup MPIO on the least critical box but rebooted that one as I used the -r -i -a options. My question is will I be able to
run mpclaim -n -i -d "HP MSA 2040 SAN" and not have to reboot afterwards? I have read every piece of documentation and some seem to hint this is possible in 2008 R2 and later but it is not explicitly clear as MS haven't updated
all their docs to detail differences.
I suppose I am after the wisdom of experience.
Since MPIO has already been installed and working for a different array I am hoping any requirement to reboot should not be there?
Your advice greatly appreciated.
K

Hi,
If the server cannot be rebooted at the time the command is run, you could use the -n switch instead. The devices will not be claimed by MPIO until the server reboots.
For more detailed information, please refer to the articles below:
Microsoft MPIO Command Line Reference (mpclaim) and Server Core Configuration
http://blogs.msdn.com/b/san/archive/2008/07/27/microsoft-mpio-command-line-reference-mpclaim-and-server-core-configuration.aspx
Configuring Multipath I/O
http://sourcedaddy.com/windows-7/configuring-multipath-io.html
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Exchange Server Restarts Automatically After Configuring Allowed Kerberos Encryption Types

Hi,
Our Exchange 2013 SP1 servers are installed on Windows Server 2012 R2. After configuring "Network security: Configure encryption types allowed for Kerberos" to AES256_HMAC_SHA1
only. The Exchange Servers began rebooting automatically. But after adding RC4_HMAC_MD5, the issue stopped.
Does this means that Exchange 2013 SP1 requires RC4_HMAC_MD5 as an allowed Kerberos encryption type?

this will help you to understand...
http://blogs.msdn.com/b/openspecification/archive/2011/05/31/windows-configurations-for-kerberos-supported-encryption-type.aspx
Thanks Prem P Rana MCSA Messaging 2003 MCSE 2003 Server MCTS MCITP Exchange 2007, 2010 Gurgaon, India http://blogs.msexchange-experts.com

Does WLC require a reboot after configuring SNMPv3

Similar Messages

Maybe you are looking for