Does WLS 6.1 sp2 allow (bean managed) entity beans to have transaction mode NOTSUPPORTED?
Hi,
I have created two bean managed entity beans, User and Role, abstracting users
and groups in a ldap base. A User may have more than one Role. This is represented
by a (bean managed) 1:many relationship directed from User to Role. For some weird
reasons I get a transaction rollback when reading data, when transactions are
turned on (REQUIRED).
While we where running WLS 6.1 sp1 we had no problems with this as we could set
transaction to NOTSUPPORTED for these two EJBs. Due to other hickups we had to
upgrade to sp2 and suddenly the error reappears leading me to believe that NOTSUPPORTED
isn't allowed anymore by the WLS. I know that NOTSUPPORTED isn't required by the
EJB spec, but containers may support it and obviously WLS used to do just that.
I have not seen any change in the release notes of sp2 that indicates that this
behaviour has changed.
Does anybody know if WLS really doesn't support NOTSUPPORTED for enity beans anymore
in sp2?
If anybody are curiuos or have any good ideas, the stacktrace I get is:
javax.ejb.TransactionRolledbackLocalException: EJB Exception:
- with nested exception:
[javax.ejb.EJBException
- with nested exception:
[weblogic.transaction.RollbackException: Unexpected exception in beforeCompletion:
sync=weblogic.ejb20.internal.TxManager$TxListener@1c2906 - with nested exception:
[java.util.ConcurrentModificationException]]]
Start server side stack trace:
java.rmi.RemoteException: EJB Exception: ; nested exception is:
javax.ejb.TransactionRolledbackLocalException: EJB Exception:
- with nested exception:
[javax.ejb.EJBException
- with nested exception:
[weblogic.transaction.RollbackException: Unexpected exception in beforeCompletion:
sync=weblogic.ejb20.internal.TxManager$TxListener@1c2906 - with nested exception:
[java.util.ConcurrentModificationException]]]
java.util.ConcurrentModificationException
at java.util.LinkedList$ListItr.checkForComodification(LinkedList.java:535)
at java.util.LinkedList$ListItr.next(LinkedList.java:476)
at weblogic.ejb20.manager.DBManager.beforeCompletion(DBManager.java:370)
at weblogic.ejb20.internal.TxManager$TxListener.beforeCompletion(TxManager.java:481)
at weblogic.transaction.internal.ServerSCInfo.callBeforeCompletions(ServerSCInfo.java:551)
at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:88)
at weblogic.transaction.internal.ServerTransactionImpl.localPrePrepareAndChain(ServerTransactionImpl.java:980)
at weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:1504)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:216)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:190)
at weblogic.ejb20.internal.BaseEJBLocalObject.postInvoke(BaseEJBLocalObject.java:207)
at com.takecargo.domainentities.role.RoleBean_1ipw6_ELOImpl.getName(RoleBean_1ipw6_ELOImpl.java:86)
at com.takecargo.domainentities.role.RoleConverter.getVOforRoleLocal(RoleConverter.java:51)
Any kind of help would be appreciated:)
Regards,
Brynjar Glesnes
WLS support NotSupported on Entity Beans.
It looks like you've hit a bug in the EJB container where an internal Collection class has been modified while the
container is running through an iterator on it.
You should open a case with [email protected]
-- Rob
Brynjar Glesnes wrote:
Hi,
I have created two bean managed entity beans, User and Role, abstracting users
and groups in a ldap base. A User may have more than one Role. This is represented
by a (bean managed) 1:many relationship directed from User to Role. For some weird
reasons I get a transaction rollback when reading data, when transactions are
turned on (REQUIRED).
While we where running WLS 6.1 sp1 we had no problems with this as we could set
transaction to NOTSUPPORTED for these two EJBs. Due to other hickups we had to
upgrade to sp2 and suddenly the error reappears leading me to believe that NOTSUPPORTED
isn't allowed anymore by the WLS. I know that NOTSUPPORTED isn't required by the
EJB spec, but containers may support it and obviously WLS used to do just that.
I have not seen any change in the release notes of sp2 that indicates that this
behaviour has changed.
Does anybody know if WLS really doesn't support NOTSUPPORTED for enity beans anymore
in sp2?
If anybody are curiuos or have any good ideas, the stacktrace I get is:
javax.ejb.TransactionRolledbackLocalException: EJB Exception:
- with nested exception:
[javax.ejb.EJBException
- with nested exception:
[weblogic.transaction.RollbackException: Unexpected exception in beforeCompletion:
sync=weblogic.ejb20.internal.TxManager$TxListener@1c2906 - with nested exception:
[java.util.ConcurrentModificationException]]]
Start server side stack trace:
java.rmi.RemoteException: EJB Exception: ; nested exception is:
javax.ejb.TransactionRolledbackLocalException: EJB Exception:
- with nested exception:
[javax.ejb.EJBException
- with nested exception:
[weblogic.transaction.RollbackException: Unexpected exception in beforeCompletion:
sync=weblogic.ejb20.internal.TxManager$TxListener@1c2906 - with nested exception:
[java.util.ConcurrentModificationException]]]
java.util.ConcurrentModificationException
at java.util.LinkedList$ListItr.checkForComodification(LinkedList.java:535)
at java.util.LinkedList$ListItr.next(LinkedList.java:476)
at weblogic.ejb20.manager.DBManager.beforeCompletion(DBManager.java:370)
at weblogic.ejb20.internal.TxManager$TxListener.beforeCompletion(TxManager.java:481)
at weblogic.transaction.internal.ServerSCInfo.callBeforeCompletions(ServerSCInfo.java:551)
at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:88)
at weblogic.transaction.internal.ServerTransactionImpl.localPrePrepareAndChain(ServerTransactionImpl.java:980)
at weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:1504)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:216)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:190)
at weblogic.ejb20.internal.BaseEJBLocalObject.postInvoke(BaseEJBLocalObject.java:207)
at com.takecargo.domainentities.role.RoleBean_1ipw6_ELOImpl.getName(RoleBean_1ipw6_ELOImpl.java:86)
at com.takecargo.domainentities.role.RoleConverter.getVOforRoleLocal(RoleConverter.java:51)
Any kind of help would be appreciated:)
Regards,
Brynjar Glesnes
Similar Messages
-
Upgrading WLS 8.1 SP2 to SP5: does SSL setup need to be re-done?
All,
Our production application has been built using Workshop 8.1 SP2, and is deployed on a WLS 8.1 SP2. We are now wanting to upgrade to SP5, and so I used the "Smart Update" utility to upgrade my local instance to SP5. Our application is accessed over SSL, so I was wondering if the whole SSL-setup that was done when we setup our production SP2 environment a year ago needs to be re-done? Our application has a web module, two java projects, uses SSL-based web-services and has a custom Oracle JAAS login module. I already found out that there is a particular setting on the domain that has changed between SP2 and SP5 that allows anonymous lookup of MBeans(Anonymous Admin Lookup Enabled). Are there any other such settings/considerations i need to be aware of in moving from SP2 to SP5?
All help is appreciated..it will help me decide on moving to SP5.
Thanks in advance!
Vik.Hi Vik
When you use smartupdate to upgrade from sp2 to sp5, it will upgrade only the weblogic workshop instance and not the domains.
Either you will have to upgrade the existing sp2 domain to sp5 or create a new sp5 domain and configure it just like sp2.
After the upgrade open the config.xml under the new domain and check the SSL config under the server just to make sure.As far as the SSL config is concerned it did not change from sp2 to sp5.
More information on this is available at
http://e-docs.bea.com/platform/docs81/upgrade/faq.html
Thanks
Vimala -
WLS Cluster with Message Driven Beans and MQSeries on more than one Host
With the Examples of http://developer.bea.com/jmsproviders.jsp and http://developer.bea.com/jmsmdb.jsp
a MDB can be
configured to work with MQSeries with one WLS Server. This works only, if a Queuemanager
is started at the same Host that runs the WLS Server too.
And the QueueConnectionFactory (QCF) is configured to TRANSPORT(BIND).
In my configuration should be two WLS Servers and one JMS Queue (MQS) with the
Queuemanager.
A Message Driven Bean is deployed on both WLS Servers wich should get the Messages
of this Queue.
If one of the two WLS Servers fails the other WLS Server with the corresponding
MDB should get the Messages of the
MQSeries Queue.
If the QCF is configured to TRANSPORT(Client) the Message Driven Bean can't start
and the following Exception is thrown:
<Jul 18, 2001 3:52:49 PM CEST> <Error> <J2EE> <Error deploying EJB Component :
mdb_deployed
weblogic.ejb20.EJBDeploymentException: Error deploying Message-Driven EJB:; nested
exception is:
javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for
'btsun1a:TEST'
javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'btsun1a:TEST'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:434)
I'm wondering, because their is a MQQueueManager on btsun1a; all Servers throws
the same Exception when the MDB is deployed.
The configuration of JMSadmin on both Hosts is the following:
dis qcf(myQCF2)
HOSTNAME(btsun1a)
CCSID(819)
TRANSPORT(CLIENT)
PORT(1414)
TEMPMODEL(SYSTEM.DEFAULT.MODEL.QUEUE)
QMANAGER(TEST)
CHANNEL(JAVA.CHANNEL)
VERSION(1)
dis q(myQueue)
CCSID(819)
PERSISTENCE(APP)
TARGCLIENT(JMS)
QUEUE(MYQUEUE)
EXPIRY(APP)
QMANAGER(TEST)
ENCODING(NATIVE)
VERSION(1)
PRIORITY(APP)
I think only TRANSPORT(CLIENT) can be used when i don't wan't to install a Queue
and a QueueManager on each WLS Server.
Does anybody know a problem of WLS 6.0 SP2 to cope with TRANSPORT(CLIENT)?
With the Examples of http://developer.bea.com/jmsproviders.jsp and http://developer.bea.com/jmsmdb.jsp
a MDB can be
configured to work with MQSeries with one WLS Server. This works only, if a Queuemanager
is started at the same Host that runs the WLS Server too.
And the QueueConnectionFactory (QCF) is configured to TRANSPORT(BIND).
In my configuration should be two WLS Servers and one JMS Queue (MQS) with the
Queuemanager.
A Message Driven Bean is deployed on both WLS Servers wich should get the Messages
of this Queue.
If one of the two WLS Servers fails the other WLS Server with the corresponding
MDB should get the Messages of the
MQSeries Queue.
If the QCF is configured to TRANSPORT(Client) the Message Driven Bean can't start
and the following Exception is thrown:
<Jul 18, 2001 3:52:49 PM CEST> <Error> <J2EE> <Error deploying EJB Component :
mdb_deployed
weblogic.ejb20.EJBDeploymentException: Error deploying Message-Driven EJB:; nested
exception is:
javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for
'btsun1a:TEST'
javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'btsun1a:TEST'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:434)
I'm wondering, because their is a MQQueueManager on btsun1a; all Servers throws
the same Exception when the MDB is deployed.
The configuration of JMSadmin on both Hosts is the following:
dis qcf(myQCF2)
HOSTNAME(btsun1a)
CCSID(819)
TRANSPORT(CLIENT)
PORT(1414)
TEMPMODEL(SYSTEM.DEFAULT.MODEL.QUEUE)
QMANAGER(TEST)
CHANNEL(JAVA.CHANNEL)
VERSION(1)
dis q(myQueue)
CCSID(819)
PERSISTENCE(APP)
TARGCLIENT(JMS)
QUEUE(MYQUEUE)
EXPIRY(APP)
QMANAGER(TEST)
ENCODING(NATIVE)
VERSION(1)
PRIORITY(APP)
I think only TRANSPORT(CLIENT) can be used when i don't wan't to install a Queue
and a QueueManager on each WLS Server.
Does anybody know a problem of WLS 6.0 SP2 to cope with TRANSPORT(CLIENT)?
-
Hi All.
we have migrated to WLS 6.1 SP2, now we have a serious problem with the cluster
wihch die after several minutes. Our architecture is several front-ends servers
(concretely servelts, without cluster) make request to back-end (starteles EJB,
DB access). This back-end is compuond by four WLS instances running into 2 Sun
Solaris Machines. The system reports the nexts messages in the weblogic.log.
* backendPlatformA instance
for queue: 'default'> <> <> <000274> <Removing "ClientContext - id:
'#|platformA|129.1027407260379', bound: 'false', dead: 'false'" because
of soft disconnect timeout.>
####<Jul 23, 2002 10:02:24 AM GMT> <Info> <DGCserver> <wls00>
<platformA> <ExecuteThread: '117' for queue: 'default'> <system> <>
<000000> <Tried to renew lease on lost reference: '257'>
* backendPlatformB instance
for queue: 'default'> <> <> <000274> <Removing "ClientContext - id:
'#|platformB|118.1027407423933', bound: 'false', dead: 'false'" because
of soft disconnect timeout.>
####<Jul 23, 2002 10:03:52 AM GMT> <Info> <WebLogicServer> <wls00>
<platformB> <ExecuteThread: '114' for queue: 'default'> <> <> <000274>
<Removing "ClientContext - id: '#|platformB|119.1027407423933', bound:
'false', dead: 'false'" because of soft disconnect timeout.>
* ioboxPlatfromC instance
for queue: 'default'> <> <> <000274> <Removing "ClientContext - id:
'#|platformC|139.1027407286958', bound: 'false', dead: 'false'" because
of soft disconnect timeout.>
####<Jul 23, 2002 10:04:24 AM GMT> <Info> <DGCserver> <wls01>
<platformC> <ExecuteThread: '119' for queue: 'default'> <system> <>
<000000> <Tried to renew lease on lost reference: '257'>
* Instancia ioboxPlatfromD
for queue: 'default'> <> <> <000274> <Removing "ClientContext - id:
'#|platformD|58.1027415900956', bound: 'false', dead: 'false'" because
of soft disconnect timeout.>
####<Jul 23, 2002 10:05:54 AM GMT> <Info> <WebLogicServer> <wls01>
<platformD> <ExecuteThread: '107' for queue: 'default'> <> <> <000274>
<Removing "ClientContext - id: '#|platformD|59.1027415900956', bound:
'false', dead: 'false'" because of soft disconnect timeout.>
####<Jul 23, 2002 10:06:22 AM GMT> <Info> <Cluster> <wls01> <platformD>
<ExecuteThread: '107' for queue: 'default'> <> <> <000113> <Removing
platformA
jvmid:7148145370197743783S:10.2.1.1:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformA
from cluster view due to PeerGone>
####<Jul 23, 2002 10:06:22 AM GMT> <Info> <Cluster> <wls01> <platformD>
<ExecuteThread: '116' for queue: 'default'> <> <> <000129> <Removing
7148145370197743783S:10.2.1.1:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformA
to the cluster>
####<Jul 23, 2002 10:06:22 AM GMT> <Error> <T3Services> <wls01>
<platformD> <ExecuteThread: '102' fo
r queue: 'default'> <> <5577:04d703f24ce814ba> <000000> < Parametros
anaydidos>
####<Jul 23, 2002 10:06:33 AM GMT> <Error> <ConnectionManager> <wls01>
<platformD> <ExecuteThread: '119' for queue: 'default'> <system> <>
<000000> <Closing: 'weblogic.rjvm.t3.T3JVMConnection@63718b' because of:
'Server received a message over an uninitialized connection: 'JVMMessage
from: 'null' to:
'1615014391094985181S:10.2.1.4:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformD'
cmd: 'CMD_REQUEST', QOS: '101', responseId: '1', invokableId: '454',
flags: 'JVMIDs Not Sent, TX Context Not Sent', abbrev offset: '38'''
Any idea?
Thanks for all
Hi,
We are using Weblogic 6.1 SP2, NT 4.0 and java 1.3.1. We have also encountered
the same error message. We have 1 admin and 2 managed servers. We have tried connecting
in using weblogic.admin to check the idle thread and we are able to connect. However,
when we connect from IIS to Weblogic, the application failed to response. We have
tried connect direct to weblogic but it does not response as well. We have seen
that the idle thread left has been reduced but there is no activites from the
weblogic console. The thread is used but not releasing and the console is not
moving. When we shutdown one of the managed server, the application is able to
process as seen from the console.
We have turned off native io and this behavior is not seen. When we turn on native
io, it appear. So we can conclude that it is related to native io.
Is there any solution or intermediate patch without upgrading to the later SP
Thanks
Rajesh Mirchandani <[email protected]> wrote:
>We are shipping the Jdriver for oracle 816 with SP3. Use the driver
>from .\bin\oci816_8
>
>Manuel wrote:
>
>> Thanks Rajesh,
>>
>> we have another problem since our database is Oracle 8.1.6 and SP3
>jDriver doesn´t
>> support this version.
>>
>> Best Regards
>>
>> Rajesh Mirchandani <[email protected]> wrote:
>> >Upgrade to SP3, if possible.
>> >
>> >Manuel wrote:
>> >
>> >> Hi All.
>> >>
>> >> we have migrated to WLS 6.1 SP2, now we have a serious problem with
>> >the cluster
>> >> wihch die after several minutes. Our architecture is several front-ends
>> >servers
>> >> (concretely servelts, without cluster) make request to back-end
>(starteles
>> >EJB,
>> >> DB access). This back-end is compuond by four WLS instances running
>> >into 2 Sun
>> >> Solaris Machines. The system reports the nexts messages in the weblogic.log.
>> >>
>> >> * backendPlatformA instance
>> >>
>> >> for queue: 'default'> <> <> <000274> <Removing "ClientContext -
>id:
>> >> '#|platformA|129.1027407260379', bound: 'false', dead: 'false'"
>because
>> >> of soft disconnect timeout.>
>> >> ####<Jul 23, 2002 10:02:24 AM GMT> <Info> <DGCserver> <wls00>
>> >> <platformA> <ExecuteThread: '117' for queue: 'default'> <system>
><>
>> >> <000000> <Tried to renew lease on lost reference: '257'>
>> >>
>> >> * backendPlatformB instance
>> >>
>> >> for queue: 'default'> <> <> <000274> <Removing "ClientContext -
>id:
>> >> '#|platformB|118.1027407423933', bound: 'false', dead: 'false'"
>because
>> >> of soft disconnect timeout.>
>> >> ####<Jul 23, 2002 10:03:52 AM GMT> <Info> <WebLogicServer> <wls00>
>> >> <platformB> <ExecuteThread: '114' for queue: 'default'> <> <> <000274>
>> >> <Removing "ClientContext - id: '#|platformB|119.1027407423933',
>bound:
>> >> 'false', dead: 'false'" because of soft disconnect timeout.>
>> >>
>> >> * ioboxPlatfromC instance
>> >>
>> >> for queue: 'default'> <> <> <000274> <Removing "ClientContext -
>id:
>> >> '#|platformC|139.1027407286958', bound: 'false', dead: 'false'"
>because
>> >> of soft disconnect timeout.>
>> >> ####<Jul 23, 2002 10:04:24 AM GMT> <Info> <DGCserver> <wls01>
>> >> <platformC> <ExecuteThread: '119' for queue: 'default'> <system>
><>
>> >> <000000> <Tried to renew lease on lost reference: '257'>
>> >>
>> >> * Instancia ioboxPlatfromD
>> >>
>> >> for queue: 'default'> <> <> <000274> <Removing "ClientContext -
>id:
>> >> '#|platformD|58.1027415900956', bound: 'false', dead: 'false'" because
>> >> of soft disconnect timeout.>
>> >> ####<Jul 23, 2002 10:05:54 AM GMT> <Info> <WebLogicServer> <wls01>
>> >> <platformD> <ExecuteThread: '107' for queue: 'default'> <> <> <000274>
>> >> <Removing "ClientContext - id: '#|platformD|59.1027415900956', bound:
>> >> 'false', dead: 'false'" because of soft disconnect timeout.>
>> >> ####<Jul 23, 2002 10:06:22 AM GMT> <Info> <Cluster> <wls01> <platformD>
>> >> <ExecuteThread: '107' for queue: 'default'> <> <> <000113> <Removing
>> >> platformA
>> >> jvmid:7148145370197743783S:10.2.1.1:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformA
>> >> from cluster view due to PeerGone>
>> >> ####<Jul 23, 2002 10:06:22 AM GMT> <Info> <Cluster> <wls01> <platformD>
>> >> <ExecuteThread: '116' for queue: 'default'> <> <> <000129> <Removing
>> >> 7148145370197743783S:10.2.1.1:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformA
>> >> to the cluster>
>> >> ####<Jul 23, 2002 10:06:22 AM GMT> <Error> <T3Services> <wls01>
>> >> <platformD> <ExecuteThread: '102' fo
>> >> r queue: 'default'> <> <5577:04d703f24ce814ba> <000000> < Parametros
>> >> anaydidos>
>> >> ####<Jul 23, 2002 10:06:33 AM GMT> <Error> <ConnectionManager> <wls01>
>> >> <platformD> <ExecuteThread: '119' for queue: 'default'> <system>
><>
>> >> <000000> <Closing: 'weblogic.rjvm.t3.T3JVMConnection@63718b' because
>> >of:
>> >> 'Server received a message over an uninitialized connection: 'JVMMessage
>> >> Wrom: HJEXXIMQZU
>> >> '1615014391094985181S:10.2.1.4:[17001,17001,7002,7002,17001,7002,-1]:backendPlatform:platformD'
>> >> cmd: 'CMD_REQUEST', QOS: '101', responseId: '1', invokableId: '454',
>> >> flags: 'JVMIDs Not Sent, TX Context Not Sent', abbrev offset: '38'''
>> >>
>> >> Any idea?
>> >>
>> >> Thanks for all
>> >
>> >--
>> >Rajesh Mirchandani
>> >Developer Relations Engineer
>> >BEA Support
>> >
>> >
>
>--
>Rajesh Mirchandani
>Developer Relations Engineer
>BEA Support
>
>
-
In configuring our WLS 6.1 SP2 to run on the released JDK 1.4 and starting the
server, most things seemed to start fine except for our ObjectIDFactorySession
EJB. It cacked when it tried to create a bean in the free pool. Stack trace
below. I know this is not supported, but can anyone shed some light?
####<Feb 15, 2002 3:05:03 PM EST> <Warning> <EJB> <023app11> <port7011server>
<main> <system> <> <010063> <The EJB: ObjectIDFactorySession had an <initial-beans-in-free-pool>
setting in its weblogic-ejb-jar.xml. An error occurred while creating these initial
bean instances. The error was:
nulljava.lang.ExceptionInInitializerError
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:296)
at java.lang.Class.newInstance(Class.java:249)
at javax.rmi.CORBA.Util.createDelegateIfSpecified(Util.java:339)
at javax.rmi.CORBA.Util.<clinit>(Util.java:51)
at javax.rmi.PortableRemoteObject.createDelegateIfSpecified(PortableRemoteObject.java:179)
at javax.rmi.PortableRemoteObject.<clinit>(PortableRemoteObject.java:58)
at prototype.com.guardian.util.HomeFactory.createHome(HomeFactory.java:81)
at prototype.com.guardian.util.HomeFactory.newHome(HomeFactory.java:49)
at prototype.com.guardian.util.HomeFactory.newSession(HomeFactory.java:95)
at prototype.com.guardian.fw.ObjectIDFactorySessionBean.ejbCreate(ObjectIDFactorySessionBean.java:31)
at prototype.com.guardian.fw.ObjectIDFactorySessionBean_r4ogoq_Impl.ejbCreate(ObjectIDFactorySessionBean_r4ogoq_Impl.java:112)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.java:153)
at weblogic.ejb20.pool.Pool.createInitialBeans(Pool.java:198)
at weblogic.ejb20.pool.Pool.onAfterDeploy(Pool.java:177)
at weblogic.ejb20.deployer.Deployer.runAfterDeploymentListeners(Deployer.java:1325)
at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:1013)
at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:30)
at weblogic.j2ee.Application.addComponent(Application.java:163)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:329)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
at sun.reflect.GeneratedMethodAccessor20.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:491)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:361)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.DynamicMBeanImpl.addDeployment(DynamicMBeanImpl.java:984)
at weblogic.management.internal.DynamicMBeanImpl.addDeployment(DynamicMBeanImpl.java:971)
at weblogic.management.internal.DynamicMBeanImpl.add(DynamicMBeanImpl.java:956)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:648)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy65.addTarget(Unknown Source)
at weblogic.management.mbeans.custom.ApplicationManager.autoDeploy(ApplicationManager.java:867)
at weblogic.management.mbeans.custom.ApplicationManager.addApplication(ApplicationManager.java:966)
at weblogic.management.mbeans.custom.ApplicationManager.addApplication(ApplicationManager.java:886)
at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:802)
at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:733)
at weblogic.management.mbeans.custom.ApplicationManager.update(ApplicationManager.java:206)
at weblogic.management.mbeans.custom.ApplicationManager.startAdminManager(ApplicationManager.java:278)
at weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManager.java:152)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy5.start(Unknown Source)
at weblogic.management.Admin.startApplicationManager(Admin.java:1184)
at weblogic.management.Admin.finish(Admin.java:590)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:518)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:203)
at weblogic.Server.main(Server.java:35)
Caused by: java.lang.RuntimeException: could not find or instantiate any UtilDelegate
class
at weblogic.iiop.UtilDelegateImpl.<clinit>(UtilDelegateImpl.java:73)
... 77 more
>I've solved my own problem. I learned that there was a sp4 (let alone a
sp3) for WLS. Installed that and the problem went away. Sorry for the
noise.
-Phil
Philip Bower <[email protected]> wrote in
news:[email protected]:
When I try to deploy the struts-example.war or if I add the struts.jar
to any other web app I've created, I get this error when I start WLS
and it tries to deploy that war.
java.lang.StringIndexOutOfBoundsException
at weblogic.servlet.internal.WebAppHelper.resolveManifestName
(WebAppHelper.java:469)
I'm using version 1.1b3 of struts. I'm having no problems with
version 1.0.2 of struts.
I'm guessing its complaining about the manifest file in struts.jar,
but I don't understand why.
Here's my version info and the stack trace (my web app is called
findme in this example). Thanks in advance.
-Phil
Server BuildWebLogic Server 6.1 SP2 12/18/2001 11:13:46 #154529
All Server Product VersionsWebLogic Server 6.1 SP2 12/18/2001
11:13:46 #154529 WebLogic XML Module 6.1 SP2 12/18/2001 11:28:02
#154529
<Feb 11, 2003 7:45:25 AM EST> <Error> <J2EE> <Error deploying
application findme: Could not load findme>
<Feb 11, 2003 7:45:25 AM EST> <Error> <Management> <ApplicationManager
starting Config caught throwable
java.lang.reflect.UndeclaredThrowableException:
java.lang.StringIndexOutOfBoundsException: String index out of range:
-1
at java.lang.String.substring(String.java:1525)
at
weblogic.servlet.internal.WebAppHelper.resolveManifestName(WebAppHelper
.jav a:469)
at
weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.j
ava: 234)
at
weblogic.servlet.internal.WebAppServletContext.extractClassFiles(WebApp
Serv letContext.java:3407)
at
weblogic.servlet.internal.WebAppServletContext.setDocroot(WebAppServlet
Cont ext.java:3376)
at
weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContex
t.ja va:862) -
ERROR: Error from ejbc: in WLS 6.1 sp2 Win2K
Never had this problem before. Started new project using WLS 6.1 sp2 under Windows
2K Prof., using ANT & get;
ERROR: Error from ejbc:
In EJB NOTiFYEJB, method createUser defined in the remote interface either does
not exist in the bean class, or it is not a public method. Each method in the
remote interface must have a corresponding public method in the bean class.
BUILD FAILED
I saw a posting which referred to a problem with Win2K & an old (1.2) JDK in the
path. I have put C:\bea\jdk131 at the front of my class path but still get this
error.The problem was nothing to do with classpaths etc.
CMP does not support "Date" types and in my EJB I had Date types, I changed these
to "long" and converted all Dates to number of milleseconds from 1970 and persisted
them to a number column in Oracle.
It was the entries in the weblogic-cmp-rdbms.xml which was the root of the problem.
"Roger Lee" <[email protected]> wrote:
>
Matthew,
Thanks for yor suggestions.
My classpath is set in the ANT.BAT & only points to the tools.jar, weblogic_sp.jar
& weblogic.jar.
I have my JARs in a manfest file in each directory with the "Class-Path:"
entry.
I have also added a new Bean with compiles & ejbcs fine. But I still
get an error
with my "createUser" method, saying the interface does not exist in the
bean class
or is not a public method.
I have even changed it's name to "createUserCandidate" just in case it
was clashing
with an existing method.
Any other ideas for investigation?
Thanks.
Matthew Shinn <[email protected]> wrote:
Hi Roger,
Roger Lee wrote:
The "warnings saying classes are being loaded from your classpath"are, I believe
just warning from Ant. I searched the newsgroups and it appears thatthis is not
a problem.These warnings are from ejbc. They are there to let you know that classes\interfaces
needed by your EJB are being loaded from your classpath and not your
jar. They
should be taken seriously. This could definitely be the cause of your
problem. As I
said in my previous posting, ejbc could be loading an old version of
your bean class
from your classpath. This old class may not contain the createUsermethod
with the
same signature as the method in your remote interface.
Is this an issue with WLS 6.1 sp2?I don't believe so.
I've wasted so much time on this any help would be appreciated.You essentially have three options.
1. Take my advice and make sure your classes are being loaded fromyour
jar and not
the classpath.
2. Post your entire jar so we can try to reproduce the problem.
3. Contact support.
- Matt
Matthew Shinn <[email protected]> wrote:
Hi Roger,
Your bean and interface look fine. One thing you might try is explicitly
declaring
your createUser method to be public in your remote interface. I
don't
think this
will change the outcome but it's worth a try. When you run ejbcdo
you
get any
warnings saying classes are being loaded from your classpath ratherthan
your jar?
If this were the case, you could have an old copy of your bean inyour
classpath
that ejbc is picking up. If this doesn't help, I think the next
step
is to send me
or post your entire jar.
- Matt
Roger Lee wrote:
Typo that should have been "path", I had added "C:\bea\jdk131"
to
the
front of
my path & was getting the error.
Enclose my two classes in the attached file.
Thanks for you help.
Matthew Shinn <[email protected]> wrote:
Hi Roger,
Make sure you put C:\bea\jdk131 in front of your path (not classpath).
:) Assuming
this isn't the problem, can you please post any createUser method
declarations
in your
remote interface and the corresponding createUser methods in yourbean
class?
- Matt
Name: NOTiFY_&_NOTiFYBean.java
NOTiFY_&_NOTiFYBean.java Type: java/*
Encoding: base64 -
Hi
I have developed an appliaction using wls 6.1 sp2 on w2k, which I want to migrate
to Solaris 8.
I have modified my windows statup scripts to Solaris, but I get a strange error
when starting weblogic. I am starting the server as root and my weblogic.policy
file is modified according to my installation.
Has anybody encountered anything similar?
<Feb 20, 2002 12:08:09 PM CET> <Critical> <Management> <Unable to deploy an internal
management web application - <all-internal-apps>. Managed servers may be unable
to start.
java.io.FileNotFoundException: ./config/Certifikat/.wlstaging/wl_management_internal2.war
(No such file or directory)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:102)
at java.io.FileOutputStream.<init>(FileOutputStream.java:62)
at java.io.FileOutputStream.<init>(FileOutputStream.java:132)
at weblogic.management.mbeans.custom.ApplicationManager.stageGlobalWarFile(ApplicationManager.java:398)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(ApplicationManager.java:334)
at weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManager.java:152)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:606)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:590)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:350)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:444)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
at $Proxy35.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start(ApplicationManagerMBean_CachingStub.java:479)
at weblogic.management.Admin.startApplicationManager(Admin.java:1138)
at weblogic.management.Admin.finish(Admin.java:561)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:501)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:198)
at weblogic.Server.main(Server.java:35)
>
My startup script is as follows
bash-2.03$ more startWeblogic.sh
#!/usr/bin/bash
# Set user-defined variables.
export PROJECT=postdanmark
export ENVIRONMENT=test
export RELEASE_DIR=/opt/projects/$PROJECT/$ENVIRONMENT/lib
export JAVA_HOME=/opt/jdk/j2sdk1_3_1_02
export WEBLOGIC_HOME=/opt/bea/weblogic/6.1
export PATH=$WEBLOGIC_HOME/bin:$JAVA_HOME/jre/bin:$JAVA_HOME/bin:.:$PATH
export CLASSPATH=$RELEASE_DIR/internal/util/1.0/Util.jar
export CLASSPATH=$CLASSPATH:$WEBLOGIC_HOME/lib/weblogic.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/sun/jaxb/1.0ea/lib/jaxb-rt-1.0-ea.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/postdanmark/1.0/PostDanmarkPC.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/EntrustCAEjb/1.0/EntrustCAEjb.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/websupport/1.0/WebSupport.jar
export CLASSPATH=$CLASSPATH:/opt/projects/$PROJECT/$ENVIRONMENT/batch/properties
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/corba/interfaces/entrustca/1.2/EntrustCA.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/mysql/jdbc/2.0.4/mm.mysql-2.0.4-bin.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entbase.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entuser.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entp7.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entmisc.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entcertlist.jar
echo off
echo *********************************************
echo * Starting weblogic application server *
echo *********************************************
# Set WLS_PW equal to your system password for no password prompt server startup.
export WLS_PW=certifikat
# Set Production Mode. When set to true, the server starts up in production mode.
When set to false, the server starts up i
n development mode. The default is false.
export STARTMODE=false
export WEBLOGIC_OPTIONS='-Dweblogic.Domain=Certifikat'
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.Name=PostDanmarkServer"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.management.discover=false"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dbea.home=/opt/bea/weblogic/6.1"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Duser.home=/opt/projects/$PROJECTS/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Duser.dir=/opt/projects/$PROJECTS/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.management.password=$WLS_PW"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.ProductionModeEnabled=$STARTMODE"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.security.policy=$WEBLOGIC_HOME/lib/weblogic.policy"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.RootDirectory=/opt/projects/$PROJECT/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.util.logging.config.file=/opt/projects/$PROJECT/$ENVIRONMENT/batch/proper
ties/logging.properties"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.library.path=$WEBLOGIC_HOME/lib/solaris:$WEBLOGIC_HOME/lib/solaris/oci816
_8"
export JAVA_OPTIONS='-hotspot -ms64m -mx64m -classpath '
export JAVA_OPTIONS=${JAVA_OPTIONS}$CLASSPATH
echo on
echo "using JAVA OPTIONS : "$JAVA_OPTIONS"
echo "using WEBLOGIC OPTIONS : "$WEBLOGIC_OPTIONS"
"$JAVA_HOME/bin/java" $JAVA_OPTIONS $WEBLOGIC_OPTIONS weblogic.ServerHi.
Try placing the wl_management_internal2.war file from the mydomain/.wlstaging directory into the directory your server is expecting.
Regards,
Michael
Peter Buus wrote:
Hi
I have developed an appliaction using wls 6.1 sp2 on w2k, which I want to migrate
to Solaris 8.
I have modified my windows statup scripts to Solaris, but I get a strange error
when starting weblogic. I am starting the server as root and my weblogic.policy
file is modified according to my installation.
Has anybody encountered anything similar?
<Feb 20, 2002 12:08:09 PM CET> <Critical> <Management> <Unable to deploy an internal
management web application - <all-internal-apps>. Managed servers may be unable
to start.
java.io.FileNotFoundException: ./config/Certifikat/.wlstaging/wl_management_internal2.war
(No such file or directory)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:102)
at java.io.FileOutputStream.<init>(FileOutputStream.java:62)
at java.io.FileOutputStream.<init>(FileOutputStream.java:132)
at weblogic.management.mbeans.custom.ApplicationManager.stageGlobalWarFile(ApplicationManager.java:398)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(ApplicationManager.java:334)
at weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManager.java:152)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:606)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:590)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:350)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:444)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
at $Proxy35.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start(ApplicationManagerMBean_CachingStub.java:479)
at weblogic.management.Admin.startApplicationManager(Admin.java:1138)
at weblogic.management.Admin.finish(Admin.java:561)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:501)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:198)
at weblogic.Server.main(Server.java:35)
>
My startup script is as follows
bash-2.03$ more startWeblogic.sh
#!/usr/bin/bash
# Set user-defined variables.
export PROJECT=postdanmark
export ENVIRONMENT=test
export RELEASE_DIR=/opt/projects/$PROJECT/$ENVIRONMENT/lib
export JAVA_HOME=/opt/jdk/j2sdk1_3_1_02
export WEBLOGIC_HOME=/opt/bea/weblogic/6.1
export PATH=$WEBLOGIC_HOME/bin:$JAVA_HOME/jre/bin:$JAVA_HOME/bin:.:$PATH
export CLASSPATH=$RELEASE_DIR/internal/util/1.0/Util.jar
export CLASSPATH=$CLASSPATH:$WEBLOGIC_HOME/lib/weblogic.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/sun/jaxb/1.0ea/lib/jaxb-rt-1.0-ea.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/postdanmark/1.0/PostDanmarkPC.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/EntrustCAEjb/1.0/EntrustCAEjb.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/websupport/1.0/WebSupport.jar
export CLASSPATH=$CLASSPATH:/opt/projects/$PROJECT/$ENVIRONMENT/batch/properties
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/internal/corba/interfaces/entrustca/1.2/EntrustCA.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/mysql/jdbc/2.0.4/mm.mysql-2.0.4-bin.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entbase.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entuser.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entp7.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entmisc.jar
export CLASSPATH=$CLASSPATH:$RELEASE_DIR/external/entrust/java_toolkit/6.0/lib/application/entcertlist.jar
echo off
echo *********************************************
echo * Starting weblogic application server *
echo *********************************************
# Set WLS_PW equal to your system password for no password prompt server startup.
export WLS_PW=certifikat
# Set Production Mode. When set to true, the server starts up in production mode.
When set to false, the server starts up i
n development mode. The default is false.
export STARTMODE=false
export WEBLOGIC_OPTIONS='-Dweblogic.Domain=Certifikat'
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.Name=PostDanmarkServer"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.management.discover=false"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dbea.home=/opt/bea/weblogic/6.1"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Duser.home=/opt/projects/$PROJECTS/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Duser.dir=/opt/projects/$PROJECTS/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.management.password=$WLS_PW"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.ProductionModeEnabled=$STARTMODE"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.security.policy=$WEBLOGIC_HOME/lib/weblogic.policy"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Dweblogic.RootDirectory=/opt/projects/$PROJECT/$ENVIRONMENT/weblogic"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.util.logging.config.file=/opt/projects/$PROJECT/$ENVIRONMENT/batch/proper
ties/logging.properties"
export WEBLOGIC_OPTIONS=${WEBLOGIC_OPTIONS}" -Djava.library.path=$WEBLOGIC_HOME/lib/solaris:$WEBLOGIC_HOME/lib/solaris/oci816
_8"
export JAVA_OPTIONS='-hotspot -ms64m -mx64m -classpath '
export JAVA_OPTIONS=${JAVA_OPTIONS}$CLASSPATH
echo on
echo "using JAVA OPTIONS : "$JAVA_OPTIONS"
echo "using WEBLOGIC OPTIONS : "$WEBLOGIC_OPTIONS"
"$JAVA_HOME/bin/java" $JAVA_OPTIONS $WEBLOGIC_OPTIONS weblogic.Server--
Michael Young
Developer Relations Engineer
BEA Support -
Wls 8.1 sp2: weblogic.jspc complains about struts-html tags
Hi,
I am trying to compile jsps with weblogic.jspc, which use struts' html tags. However,
the compilation fails with the following message:
[java] Translation of /views/viewPageBody.jsp failed: (line 3): Error in using
tag library uri='/tags/struts-html' prefix='html': The Tag class 'org.apache.struts.taglib.html.BaseTag'
has no setter method corresponding to TLD declared attribute 'server', (JSP 1.1
spec, 5.4.1)
I opened the BaseTag class from the struts jar and found the setter exists for
the attribute 'server' of html tld. So does the property 'server'. The property
'server' is a string and the parameter in the setter is a string. I read about
the jspc errors in wls 8.1 about the setter parameter being of different type
than the property. However, that is not the case here. I tried using both Sun's
and BEA's jdk. None of them help. Btw, there is another attribute mentioned in
the html tld, which is 'target'. The compiler doesn't complain yet about this.:(
Also, I happened to compile other apps which have struts logic tags.
My environment:
OS: Win2k sp3
WLS: 8.1 sp2
JDK: Sun's 1.4.2 sp4 / Bea's 1.4.1 sp5 (tried both)
Ant: 1.5.3 (I had an issue earlier with ant until I found that Bea officially
without any mention supports only ant 1.5.3.)
I would appreciate any help in this regard.
Thanks,
Abbas
What version of Struts are you trying to use?
Are you certain you're not encountering a different instance of that class in
an unexpected location in your classpath?
"Abbas" <[email protected]> wrote:
>
>Hi,
>I am trying to compile jsps with weblogic.jspc, which use struts' html
>tags. However,
>the compilation fails with the following message:
>
>[java] Translation of /views/viewPageBody.jsp failed: (line 3): Error
>in using
>tag library uri='/tags/struts-html' prefix='html': The Tag class 'org.apache.struts.taglib.html.BaseTag'
>has no setter method corresponding to TLD declared attribute 'server',
>(JSP 1.1
>spec, 5.4.1)
>
>I opened the BaseTag class from the struts jar and found the setter exists
>for
>the attribute 'server' of html tld. So does the property 'server'. The
>property
>'server' is a string and the parameter in the setter is a string. I read
>about
>the jspc errors in wls 8.1 about the setter parameter being of different
>type
>than the property. However, that is not the case here. I tried using
>both Sun's
>and BEA's jdk. None of them help. Btw, there is another attribute mentioned
>in
>the html tld, which is 'target'. The compiler doesn't complain yet about
>this.:(
>Also, I happened to compile other apps which have struts logic tags.
>
>
>My environment:
>OS: Win2k sp3
>WLS: 8.1 sp2
>JDK: Sun's 1.4.2 sp4 / Bea's 1.4.1 sp5 (tried both)
>Ant: 1.5.3 (I had an issue earlier with ant until I found that Bea officially
>without any mention supports only ant 1.5.3.)
>
>I would appreciate any help in this regard.
>
>Thanks,
>
>Abbas
-
Troubleshooting tuneables, WLS 6.1/SP2 on Solaris 8/SPARC.
Hi,
Is there a way to monitor dynamic or otherwise the memory, filedescriptor and
CPU allocation per application and/or thread?
If this is not available in 6.1 is it available in later releases/patchlevels
such as 7.x or 8.x?
rgds
/PLYes i tried that, but it says, incorrect option, JVM could not be created.
any was i cd identify is the install binary was correct?
like any indication in jdk131/jre/bin folder?
Kumar Allamraju <[email protected]> wrote:
i think it does.
Have you tried to start with java -server weblogic.Server?
Are you getting any errors?
Kumar
vinay wrote:
Greetings
I installed, wls 6.1 sp2 on Solaris 7.
But it seems the built in jdk131 that installed doesnt support
-server option.
i checked the jdk131/jre/bin folder, but i dont see any client, serverfolders...how
is this possible?
how to correct this? -
WLS 7.0 sp2 - Servlet Problems with SOAP messages
I'm using Weblogic 7.0 SP2 and trying to create a Servlet to receive SOAP wrapped
XML messages. I'm getting the following error. Is this a problem with WLS7.0sp2's
support of JAXM? The System.out.println's indicate I have successfully received
the incoming SOAP request and then successfully formatted the SOAP response, but
upon returning saving the response it appears to blow up. Does anyone have any
suggestions?
I need to do the following in a servlet:
- receive an incoming SOAP request with an embedded XML message
- perform some processing
- return a SOAP response with an embedded XML message
Should I be using JAXM? Or can I do this same task easily with JAX-RPC?
<Feb 24, 2004 4:10:42 PM AST> <Error> <HTTP> <101017> <[ServletContext(id=260434
7,name=isd.war,context-path=)] Root cause of ServletException
java.lang.Error: NYI
at weblogic.webservice.core.soap.SOAPMessageImpl.saveRequired(SOAPMessag
eImpl.java:360)
at javax.xml.messaging.JAXMServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.run(WebAppServletContext.java:5445)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
eManager.java:780)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:3105)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2588)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
>
I've stripped the code down so that all it does is verifies the incoming SOAP/XML
request and creates a hard-coded response... be gentle... I'm a novice at this
import javax.xml.soap.*;
import javax.servlet.*;
import javax.servlet.http.*;
// import javax.xml.transform.*;
import java.util.*;
import java.io.*;
public class RegisterServlet extends HttpServlet
static MessageFactory fac = null;
static
try
fac = MessageFactory.newInstance();
catch (Exception ex)
ex.printStackTrace();
public void init(ServletConfig servletConfig) throws ServletException
super.init(servletConfig);
public void doPost(HttpServletRequest req, HttpServletResponse resp) throws ServletException,
IOException
try
System.out.println("** Note: doPost() Entering req = " + req);
// Get all the headers from the HTTP request
MimeHeaders headers = getHeaders(req);
// Get the body of the HTTP request
InputStream is = req.getInputStream();
// Now internalize the contents of a HTTP request
// and create a SOAPMessage
SOAPMessage msg = fac.createMessage(headers, is);
System.out.println("** Note: doPost() Step A");
SOAPMessage reply = null;
reply = onMessage(msg);
System.out.println("** Note: doPost() Step B reply = " + reply);
if (reply != null)
* Need to call saveChanges because we're
* going to use the MimeHeaders to set HTTP
* response information. These MimeHeaders
* are generated as part of the save.
if (reply.saveRequired())
System.out.println("** Note: doPost() Step C reply.saveRequired()");
reply.saveChanges();
resp.setStatus(HttpServletResponse.SC_OK);
putHeaders(reply.getMimeHeaders(), resp);
// Write out the message on the response stream
OutputStream os = resp.getOutputStream();
System.out.println("** Note: doPost() Step D os = " + os);
reply.writeTo(os);
os.flush();
else
resp.setStatus(HttpServletResponse.SC_NO_CONTENT);
catch (Exception ex)
throw new ServletException("** Error: SAAJ POST failed: " + ex.getMessage());
static MimeHeaders getHeaders(HttpServletRequest req)
Enumeration enum = req.getHeaderNames();
MimeHeaders headers = new MimeHeaders();
while (enum.hasMoreElements())
String headerName = (String)enum.nextElement();
String headerValue = req.getHeader(headerName);
StringTokenizer values =
new StringTokenizer(headerValue, ",");
while (values.hasMoreTokens())
headers.addHeader(headerName,
values.nextToken().trim());
return headers;
static void putHeaders(MimeHeaders headers, HttpServletResponse res)
Iterator it = headers.getAllHeaders();
while (it.hasNext())
MimeHeader header = (MimeHeader)it.next();
String[] values = headers.getHeader(header.getName());
if (values.length == 1)
res.setHeader(header.getName(),
header.getValue());
else
StringBuffer concat = new StringBuffer();
int i = 0;
while (i < values.length)
if (i != 0)
concat.append(',');
concat.append(values[i++]);
res.setHeader(header.getName(), concat.toString());
// This is the application code for handling the message.
public SOAPMessage onMessage(SOAPMessage message)
SOAPMessage replymsg = null;
try
System.out.println("** Note: OnMessage() Entering msg = " + message);
//Extract the ComputerPart element from request message and add to reply SOAP
message.
SOAPEnvelope reqse = message.getSOAPPart().getEnvelope();
SOAPBody reqsb = reqse.getBody();
//System.out.println("** Note: OnMessage() Step B");
System.out.println("** Note: OnMessage () Step A Soap Request Message Body = "
+ reqsb);
//Create a reply mesage from the msgFactory of JAXMServlet
System.out.println("** Note: OnMessage () Step B");
replymsg = fac.createMessage();
SOAPPart sp = replymsg.getSOAPPart();
SOAPEnvelope se = sp.getEnvelope();
SOAPBody sb = se.getBody();
System.out.println("** Note: OnMessage () Step C Soap Reply Before Message Body
= " + sb);
se.getBody().addBodyElement(se.createName("RegisterResponse")).addChildElement(se.createName("ErrorCode")).addTextNode("000");
System.out.println("** Note: OnMessage () Step D Soap Reply After Message Body
= " + sb);
replymsg.saveChanges();
System.out.println("** Note: OnMessage() Exiting replymsg = " + (replymsg));
catch (Exception ex)
ex.printStackTrace();
return replymsg;
Michael,
I got the same error on WLS8.1/Win2K professional and apache FOP (old version).
After digging into the WLS code and FOP(old version). i found the conflict happens
on
the "org.xml.sax.parser" system property. In WLS code, they hard coded like the
following when startup weblogic server:
System.setProperty("org.xml.sax.parser", "weblogic.xml.jaxp.RegistryParser");
But the FOP code try to use the "org.xml.sax.parser" system property to find the
sax parser then conlict happens.
Here is the response from BEA support :
"I consulted with our developers regarding the question of whether we can change
the hard-coded value for the java system property: org.xml.sax.parser by using
a configuration parameter and I found that unfortunately there is no specific
setting to change the value. As you had mentioned in your note the org.xml.sax.parser
system property can be changed programmatically in your application code."
I solve my problem by using newer apache FOP (it never use the system property:org.xml.sax.parser
any more) and XML Registy for WLS8.1.
Good luck.
David Liu
Point2 Technologies Inc.
"p_michael" <[email protected]> wrote:
>
Help.
When we migrated from WLS 6.1 to WLS 7.0 SP2 when encountered a problem
with XML
parsing that did not previously exist.
We get the error "weblogic.xml.jaxp.RegistryParser is not a SAX driver".
What does this mean? And, what should we do about it.
p_michael -
Iplanet 6.x, NSAP & WLS 6.1 SP2
This is very strange. I can get NSAPI with iplanet 4.x to come up fine (everything proxies, etc. as it should). When we try to get iPlane 6.x working with NSAPI and WLS 6.1 SP2...nothing..doesn't work. We're running everything on Solaris.
Does anyone have or know of some good documentation that might describe how to get NSAPI working between WLS 6.1 and iPlanet 6...all the examples I've been seeing are mostly Windows paths, .dlls', etc. I'd love to see some working magnus.conf & obj.conf, etc. using WLS6.1 SP2 and iPlanet 6...we're not clustered and we're not using SSL (yet) so it's pretty vanilla.
What's blowing my mind is why iplanet 4.x works and 6.x doesn;t?? I wonder if the differences between the two are really that great. I checked BEA's doc...and like I said...it seemed a bit cryptic...someone told me ther was a typo or two regarding what was to go in magnus or was it obj.conf...I don't recall..it's just frustrating trying to get NSAPI up and running with WLS 6.1 SP2 and iPlanet 6. Any ideas? Thanks!!Thanks Kumar. Does the syntax change (such as WebLogicCluster=xxxxxxxxxxxxxxx) if
we are running a single instance of WebLogic (a non-clustered environment)?
Thanks,
Doug
Kumar Allamraju <[email protected]> wrote:
In iplanet 6.x
magnus.conf should have
Init fn="load-modules" funcs="wl_proxy,wl_init" shlib=/usr/local/netscape/plugins/libproxy.so
Init fn="wl_init"
and obj.conf should have
<Object name="weblogic" ppath="*/weblogic/*">
Service fn=wl_proxy \
WebLogicCluster="myweblogic.com:7001,yourweblogic.com:7001,\
theirweblogic.com:7001" PathTrim="/weblogic"
</Object>
Pls post the exact errors that you are seeing, so that we can help
Kumar
"Doug E." wrote:
This is very strange. I can get NSAPI with iplanet 4.x to come up fine(everything proxies, etc. as it should). When we try to get iPlane 6.x
working with NSAPI and WLS 6.1 SP2...nothing..doesn't work. We're running
everything on Solaris.
Does anyone have or know of some good documentation that might describehow to get NSAPI working between WLS 6.1 and iPlanet 6...all the examples
I've been seeing are mostly Windows paths, .dlls', etc. I'd love to see
some working magnus.conf & obj.conf, etc. using WLS6.1 SP2 and iPlanet
6...we're not clustered and we're not using SSL (yet) so it's pretty vanilla.
What's blowing my mind is why iplanet 4.x works and 6.x doesn;t?? I wonderif the differences between the two are really that great. I checked BEA's
doc...and like I said...it seemed a bit cryptic...someone told me ther
was a typo or two regarding what was to go in magnus or was it obj.conf...I
don't recall..it's just frustrating trying to get NSAPI up and running
with WLS 6.1 SP2 and iPlanet 6. Any ideas? Thanks!! -
Jdk131 of wls 6.1 sp2 on Solaris 7 doesnt support -server option?
Greetings
I installed, wls 6.1 sp2 on Solaris 7.
But it seems the built in jdk131 that installed doesnt support
-server option.
i checked the jdk131/jre/bin folder, but i dont see any client, server folders...how
is this possible?
how to correct this?Yes i tried that, but it says, incorrect option, JVM could not be created.
any was i cd identify is the install binary was correct?
like any indication in jdk131/jre/bin folder?
Kumar Allamraju <[email protected]> wrote:
i think it does.
Have you tried to start with java -server weblogic.Server?
Are you getting any errors?
Kumar
vinay wrote:
Greetings
I installed, wls 6.1 sp2 on Solaris 7.
But it seems the built in jdk131 that installed doesnt support
-server option.
i checked the jdk131/jre/bin folder, but i dont see any client, serverfolders...how
is this possible?
how to correct this? -
WLS 6.1 SP2 NSAPI and iPlanet (Sun One) issues
Hi. I am going nuts with this NSAPI issue. I am working in a Solaris 8 environment,
WLS 6.1 SP2 and iPlanet (Sun One)and NSAPI. I can get everything to work fine
and dandy in aniPlanet 4.1 environment. I can not get it to work in an Iplanet
(Sun One) 6.x environment. It appears that some things work differently between
the versions of iPlanet (ie. things contained in magnus.conf and/or obj.conf).
I have tried moving things, removing things, adding things and nothing seems
to work....it's almost as though the NSAPI, etc. are being ignored.
I've attached my magnus.conf and obj.conf files (I cut and pasted them into a
single file so I could upload it). Can anyone help me out here...I've been working
for weeks on this and can't seem to get any answers.
Thanks!
Doug
P.S. For security purpses I changed the first part of the IP add. in the files
to 1234567, etc.
Thanks
[conf_files.txt]Hi Doug
U have to put the following section
Init fn="load-modules" funcs="wl_proxy,wl_init" shlib="./libproxy.so"
Init fn="wl_init"
into magus.conf
and put the rest into obj.conf
Best Regards
Alex
"Doug E" <[email protected]> wrote:
>
Does anybody know of a good reference document on how to properly install
the NSAPI
plug-in for WLS6.1 & iPlanet6(SunOne) on Unix (Solaris). Many of the references
that
I have been finding are either incomplete, have typo's and are mostly Windows
oriented
(ie. with the .dll's, paths, examples, etc.)
My problem is that our old iPlanet 4.x works fine...everything proxies,
etc. iPlanet
6 just doesn't want to seem to communicate with WLS 6.1 SP2 We tried many
of the
saem things from the 4.x magnus & obj.confs...but things look somewhat different
in iPlanet 6.x (did they move tings..such as the fn's from one to the other,
etc.)
If so..and there are big differences in installing iPlanet 4.x vs. 6.x
then many
of the docs out there are inaccurate. Does anyone know if there is a newer
version
of the NSAPI plug-in for Unix.
I would love to see a basic, working set of magnus.conf obj.conf, MIME,etc
from someone
who has actually gotten NSAPI to work between WLS 6.1 and iPlanet 6 on Unix
(Solaris)
It blows my mind that 4.x works and 6.x doesn't. An updated NSAPI plug-in
, if it exists and perhaps fixes the problem, would make my day. Any ideas?
Thanks!
-Doug -
WLS 6.1 SP2, iPlanet 6 & NSAPI problems
Does anybody know of a good reference document on how to properly install the NSAPI
plug-in for WLS6.1 & iPlanet6(SunOne) on Unix (Solaris). Many of the references that
I have been finding are either incomplete, have typo's and are mostly Windows oriented
(ie. with the .dll's, paths, examples, etc.)
My problem is that our old iPlanet 4.x works fine...everything proxies, etc. iPlanet
6 just doesn't want to seem to communicate with WLS 6.1 SP2 We tried many of the
saem things from the 4.x magnus & obj.confs...but things look somewhat different
in iPlanet 6.x (did they move tings..such as the fn's from one to the other, etc.)
If so..and there are big differences in installing iPlanet 4.x vs. 6.x then many
of the docs out there are inaccurate. Does anyone know if there is a newer version
of the NSAPI plug-in for Unix.
I would love to see a basic, working set of magnus.conf obj.conf, MIME,etc from someone
who has actually gotten NSAPI to work between WLS 6.1 and iPlanet 6 on Unix (Solaris)
It blows my mind that 4.x works and 6.x doesn't. An updated NSAPI plug-in
, if it exists and perhaps fixes the problem, would make my day. Any ideas? Thanks!
-DougHi Doug
U have to put the following section
Init fn="load-modules" funcs="wl_proxy,wl_init" shlib="./libproxy.so"
Init fn="wl_init"
into magus.conf
and put the rest into obj.conf
Best Regards
Alex
"Doug E" <[email protected]> wrote:
>
Does anybody know of a good reference document on how to properly install
the NSAPI
plug-in for WLS6.1 & iPlanet6(SunOne) on Unix (Solaris). Many of the references
that
I have been finding are either incomplete, have typo's and are mostly Windows
oriented
(ie. with the .dll's, paths, examples, etc.)
My problem is that our old iPlanet 4.x works fine...everything proxies,
etc. iPlanet
6 just doesn't want to seem to communicate with WLS 6.1 SP2 We tried many
of the
saem things from the 4.x magnus & obj.confs...but things look somewhat different
in iPlanet 6.x (did they move tings..such as the fn's from one to the other,
etc.)
If so..and there are big differences in installing iPlanet 4.x vs. 6.x
then many
of the docs out there are inaccurate. Does anyone know if there is a newer
version
of the NSAPI plug-in for Unix.
I would love to see a basic, working set of magnus.conf obj.conf, MIME,etc
from someone
who has actually gotten NSAPI to work between WLS 6.1 and iPlanet 6 on Unix
(Solaris)
It blows my mind that 4.x works and 6.x doesn't. An updated NSAPI plug-in
, if it exists and perhaps fixes the problem, would make my day. Any ideas?
Thanks!
-Doug -
WLS 6.1 SP2 and Apache 1.3.26 Windows NT/2000
Hi,
Is there an Apache plugin available for WLS 6.1 (SP2) and Apache 1.3.26 running
on Windows NT/2000?
thanksI've solved my own problem. I learned that there was a sp4 (let alone a
sp3) for WLS. Installed that and the problem went away. Sorry for the
noise.
-Phil
Philip Bower <[email protected]> wrote in
news:[email protected]:
When I try to deploy the struts-example.war or if I add the struts.jar
to any other web app I've created, I get this error when I start WLS
and it tries to deploy that war.
java.lang.StringIndexOutOfBoundsException
at weblogic.servlet.internal.WebAppHelper.resolveManifestName
(WebAppHelper.java:469)
I'm using version 1.1b3 of struts. I'm having no problems with
version 1.0.2 of struts.
I'm guessing its complaining about the manifest file in struts.jar,
but I don't understand why.
Here's my version info and the stack trace (my web app is called
findme in this example). Thanks in advance.
-Phil
Server BuildWebLogic Server 6.1 SP2 12/18/2001 11:13:46 #154529
All Server Product VersionsWebLogic Server 6.1 SP2 12/18/2001
11:13:46 #154529 WebLogic XML Module 6.1 SP2 12/18/2001 11:28:02
#154529
<Feb 11, 2003 7:45:25 AM EST> <Error> <J2EE> <Error deploying
application findme: Could not load findme>
<Feb 11, 2003 7:45:25 AM EST> <Error> <Management> <ApplicationManager
starting Config caught throwable
java.lang.reflect.UndeclaredThrowableException:
java.lang.StringIndexOutOfBoundsException: String index out of range:
-1
at java.lang.String.substring(String.java:1525)
at
weblogic.servlet.internal.WebAppHelper.resolveManifestName(WebAppHelper
.jav a:469)
at
weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.j
ava: 234)
at
weblogic.servlet.internal.WebAppServletContext.extractClassFiles(WebApp
Serv letContext.java:3407)
at
weblogic.servlet.internal.WebAppServletContext.setDocroot(WebAppServlet
Cont ext.java:3376)
at
weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContex
t.ja va:862)
Maybe you are looking for
-
How do I delete an exchange account without losing my calendar and contacts?
I just switched jobs and kept all of my personal appointments and contacts in my Outlook and iPhone. I disabled the email from my previous employer but my iPhone isn't syncing my calendar and contacts with my new work email account. When i go to de
-
Most of the time when I wake up my apple tv, the white light will come on, but will not blink when I have this problem. I then have to pull the plug and then put the plug back in the socket, then it will work.
-
CollapsiblePanel, z-index and css
Hi all hi have a problem with this link http://www.aubryhijazi.com/assurancex.htm on the left side panel I have a spy CollapsiblePanel. It work fine in IE but not with Safari, Opera or Firework. Thank you for the help
-
I have apple 4s and the operating system is iOS 5.1.1 got the update message of iOS 6. if update the iOS 6, other functions will work unchanging?
-
Linking custom fields in the web ui
Hello, on the opportunities item creation screen I have added some new fields. These fields come in pairs, there is always one with the technical name, and one with a text description. I was able to add these fields to the screen, and link them to a