Does Wordpress and Adobe Muse play well together?

I already have a wordpress site, Can I use Adobe Muse to create more pages and published them on the wordpress site?
Does it require plug ins?
If so, does anyone have an example on how to go about that.
Thank you!

No that would not work. Muse is more for static brochure sites at the moment. I am sure they will add more cms type functions once it matures a little more.

Similar Messages

PS4 and Cintiq not playing well together

This problem relates to the Cintiq 21 UX & Photoshop CS4 ONLY!
I have a dual monitor setup: Cintiq 21 & NEC 19 LCD Opticlear Miltisync 90GX2. Both monitors are driven by separate ATI Radeon HD2600XT cards with 512MB video RAM. The system CPU is an AMD Athlon 64x2 Dual core 6000+ chip. I have loaded what I believe to be the most current drivers from this web site.
Start PS4 on the Cintiq side; load ANY image; get image with 6 rectangles overlaid and each rectangle is divided diagonally in half from URHC to LLHC. Lower half is good image; upper hald is either a solid color, grossly pixellated, or gibberish. Drag the image a bit and as long as it is being dragged it is a perfect image; stop dragging and it returns to the image with 6 rectangles. Drag across to the NEC monitor and image is sharp and clear while dragging but goes transparent upon release of mouse.
Start PS4 on the NEC side and all is as advertised. Drag only the image over to Cintiq and it is still good. Now drag PS4 over to the Cintiq side and all is still good. Open another image on the Cintiq side and problem repeats.
This problem is fully repeatable, does not happen with any other software, and renders PS4 virtually useless. PS3 works as advertised and always has. I've done 4 installs of CS4 to see if it was the problem including a thorough registry cleaning between installs. Situation is constant across installs. Oddly, Bridge does not exhibit the problem. I'm sending to Wacom as well. I provided 2 jpgs of what the images look like.
Any and all advice greatly appreciated
dave

Both monitors use the DVI connection on the respective cards, so no,
not at this time. Perhaps if I can locate an adapter I may be able to do
so. However, Photoshop CS3 has absolutely no problems with this set up
nor does Bridge CS4, only Photoshop. As Bridge loads with Photoshop and
is not a separate install, I'm thinking that while it could have
something to do with the cards/driver, there must be something more.
However, I've been wrong before . . . . .

.Mac and Mail not playing well together

I am not able to use the .Mac account after someone else tried mailing themselves an email with many images from my computer. The message was too big to send and I could have done it another way. In any case, when I log into Mail the .Mac account hangs (spinning circle forever). When I iqut the program Mail either crashes or gives me the following message.
"Mail has undone actions on some messages so that you can redo the actions while online.
Additional information: Operation could not be completed. (MFMessageErrorDomain error 1028.)"
How do I stop whatever it is doing and make it so I can use the account again?

Did you ever get this resolved? I'm getting the same error with a local IMAP account, so it's not just .Mac that's having trouble.

RDP and Java not playing well together

I have a Windows 8.1 Pro machine set up for RDP that connects to a field device network. The field network is not accessible from the Internet, so the only method I have to connect to the field devices is RDP through the machine. The devices use
Java for their GUI. When I log onto one of the devices in the field via RDP, the amount of memory Java uses goes up and stays up. Every time I log onto a field device, the memory usage goes up and stays up to the point if I hit 25 or so field devices, I get
an Out of Memory error and Java shuts down the main application running on the machine. However, if I log onto the devices directly from the machine, not using RDP, the amount of memory Java uses doesn't go up. The machine has 6Gb of RAM, rebooting it is the
only way to clear out the memory, which gets it back down to a more normal 14%.
Any ideas?

Hi,
What is the result if we connect to a normal Windows system via RDP? We should first find out whether this is a RDP side issue or a JAVA issue.
And for high memory issue, we have a tool named RAMMap to view the detailed memory usage
RAMMap
http://technet.microsoft.com/en-us/sysinternals/ff700229.aspx
Introduction to the new Sysinternals tool: RAMMap
http://blogs.technet.com/b/askperf/archive/2010/08/13/introduction-to-the-new-sysinternals-tool-rammap.aspx
Regards
Yolanda Zhu
TechNet Community Support

SwingWorker and Action - not playing well together

I have a long running task. I also like using AbstractAction. But since these are both classes, and Java won't let you extend more than a single class, I figured I'd build a new abstract "SwingAction" class. This extends SwingWorker and implements Action. I leave the SwingWorker classes out and leave the actionPerformed method from Action out. Here's what I'm left with:
import java.beans.PropertyChangeListener;
import java.util.HashMap;
import javax.swing.Action;
import javax.swing.event.SwingPropertyChangeSupport;
import org.geotools.gui.swing.worker.SwingWorker;
public abstract class SwingAction extends SwingWorker implements Action {
     private HashMap map = new HashMap();
     private boolean enabled = true;
     private SwingPropertyChangeSupport changer = new SwingPropertyChangeSupport(this);
     public Object getValue(String key) {
          return map.get(key);
     public void putValue(String key, Object value) {
          if (value!=null){
               Object o = map.get(key);
               if (o==null || !o.equals(value)){
                    map.put(key, value);
                    changer.firePropertyChange(key, o, value);
     public void setEnabled(boolean enabled) {
          if (enabled!=this.enabled){
               this.enabled=enabled;
               changer.firePropertyChange("enabled", new Boolean(!enabled), new Boolean(enabled));
     public boolean isEnabled() {
          return enabled;
     public void addPropertyChangeListener(PropertyChangeListener listener) {
          changer.addPropertyChangeListener(listener);
     public void removePropertyChangeListener(PropertyChangeListener listener) {
          changer.removePropertyChangeListener(listener);
}I've implemented this in a class and it works great - the first time! It seems like once I hit "start", I'm not able to call it again. I've tried calling interrupt in the finished method, but that has no affect.
I'm including the class that implements SwingAction - you'll need to change it to do something else and hook it up to a button to try it out, but if you have any idea why it's failing to run a second time, I'd love to hear it.
Thanks!
P.S. Here's the class that implements SwingAction:
import java.awt.Cursor;
import java.awt.event.ActionEvent;
import javax.swing.ImageIcon;
import javax.swing.JLabel;
public class EnlargeImageAction extends SwingAction {
     private WMSViewer wmsViewer;
     private JLabel mapImage;
     private Cursor cursor;
     public EnlargeImageAction(WMSViewer wmsViewer, JLabel mapImage){
          this.wmsViewer=wmsViewer;
          this.mapImage = mapImage;
     public Object construct() {
          System.out.println("Calling action");
          return wmsViewer.getEnlargedImage();
     public void finished() {
          mapImage.setIcon((ImageIcon)get());
          mapImage.setEnabled(true);
          wmsViewer.setCursor(cursor);
          this.setEnabled(true);
     public void actionPerformed(ActionEvent e) {
          mapImage.setEnabled(false);
          cursor = wmsViewer.getCursor();
          wmsViewer.setCursor(new Cursor(Cursor.WAIT_CURSOR));
          this.setEnabled(false);
          start();
}

Thread can't be reused.
If you want to reuse it after its run() method returned, you should re-instantiate it.

In IOS7 none of my YouTube movies show up on my site build with iWeb and its YouTube widget. On an iPad running IOS6 the site still works fine, and all movies play well. What is going on,and what can I do to solve this problem ???

In IOS7 none of my YouTube movies show up on my site build with iWeb and its YouTube widget. On an iPad running IOS6 the site still works fine, and all movies play well. What is going on,and what can I do to solve this problem ???

It's only Safari/iOS7. Chrome iOS7 works fine.
Solution?
Go to YT and grab the code.
Paste it in a HTML Snippet.

How would I create a mobile blog layout, by combining Business Catalyst's Modules and Adobe Muse's mobile design function?

The title says it all. I absolutely love Adobe Muse's ability to design mobile and tablet layouts and have grown very fond of the workflow between Business Catalyst and Adobe Muse. The only issue I have found is the ability to incorporate the blog module to a mobile design or tablet design. I understand that Business Catalyst has you insert a tag code to create a page template for the blog to sit in but is there any way to have a mobile and tablet layout for the same blog? I would love if visitors reading my blog from their phone, didn't have to switch from a phone layout to a desktop layout just to read the blog. Once they read/ switch the blog, they can no longer navigate back to the mobile website version because of the page template I have assigned to the blog. All in all, I just want the ability to have the blog fit all mobile, tablet, and desktop versions. Any ideas?

Hey Brad,
That answer really helped and I am making progress! Now for some reason when I pull up the blog on my mobile, it says 'Error: Some files are missing or can not be loaded. Please clear cache and reload the page.' Any ideas why this might be happening? I haven't used the {system_visitorDeviceClass} that you mentioned.
Maybe the method I used to create mobile layouts was wrong but what I did was create mobile and tablet layouts with the {tag_pagecontent} on each. Once published, I copied the html code for the phone template (as it did not automatically recognize the mobile and tablet page template were part of the same desktop layout) and pasted it to my template I had already assigned as a default. I then did the same for my tablet layout. What am I missing here : /
Thank you for all the help so far! I am making progress!

ICal, Mail, and Exchange don't play well together

I running Lion. Syncing happens for the most part, but there are bugs. When I create events, the name of the event reverts back to New Event after it syncs with the Exchange server. This isn't my biggest issue. The problem I desperately want to solve is that my calendar invitations do not show in Mail. The only way I can accept/decline invitations is in the iCal Invitations tray. This means that I cannot see comments people make in invitations, or even more importantly, when then decline my invitations. I know it works as it should for another user on our network, but not for me. We're both running the same apps and the same operating system.
Any thoughts on how to make the Apple apps play well, or what is the best way to wipe everything and start over? Fresh install, etc. Any suggestions are appreciated. Thanks.

I appreciate the response, but it's not the same issue. True, the "erasing the event name and reverting back to New Event" is the same, but as I said, that's not my biggest issue. I have not seen any other threads anywhere that reflect the issue of event invitations not showing in Mail (although I'm sure someone else has experienced it).
Sine there's someone else at my company with the same setup, and it's working, I was hoping that someone could suggest the best process for wiping everything out and re-installing. I used to do this back before the OSX days, but since OSX I've had so few problems that I've hardly ever needed to do any kind of support.

Wordpress or Adobe Muse vs I WEB?

Aside from blogging,any real advantages vs I WEB???

With WordPress, you can use either the free version at http://wordpress.com where your site is published to the WordPress server or you can purcahse hosting and then install http://wordpress.org at your host. This needs a database, but most good hosts that offer the Content Managements Systems such as WordPress, Drupal and Joomla offer easy one click installation.
With WordPress.com, you can upgrade to use your domain name with it if you want to, but it might work out cheaper to use WordPress.org with a host. With Wordpress.org you get plugins etc to enhance your site and there are lots more things you can do.
I decided to change and have used iWeb for quite sometime for both of my websites. I needed to register a new domain name for a new business/practice and decided to go with HostExcellence where I got a free domain name. They offered WordPress so I installed it on my server and now have a new website using WordPress. I don't have a blog with it and it can be used to create a good looking website without a blog - I have embellishments using plugins for a for a Forum feature, I have online payment using the Google checkout plugin, Contact forms with Captcha etc. and it is a good functional site without a blog.
You don't need to keep and save a domain file and as long as you can get online on any Mac or PC, you can update your site from wherever you are - simply enter your domain name and then login.
The good thing about WordPress too is that you can easily allow people to register for your site and you can allow different levels of access, such as read only or read and write ability. When they register WordPress automatically generates a password that is sent to them so that they can log in and then change it. When you log in as admin, you have access to be able to alter everything and theoretically you can have pages of the site that are only available when people register and log in.
There is a lot more that you can actually do with WordPress.org, so it would be well worth exploring and you could also look at Drupal too as this is another of the CMS's.
Don't know anything about Adobe Muse.

Error #3003: File or directory does not exist - Adobe Muse - Windows 7 - 64bit

Does anyone knows why this occurred? I had used adobe muse for quite some time now for my personal portfolio but this is the first
time I got this prompt. I can save the Muse file but I cannot preview in muse nor in a browser also I cannot export the HTML

If you look at the end of the MuseLog.txt file (in your "My Documents" folder), does it mention this error? If so, does it indicate the path of the file or folder that's not found? Knowing that would help diagnose the cause. My first guess would be that the permissions on your preferences folder location have been incorrectly altered such that Muse can no longer write the preview files there.

Help with Business Catalyst Web forms and Adobe Muse.

I created a websform to log into a secure zone using business catalyst. I pasted the webform's html into Adobe Muse. After publishing my site. The websform I created in business catalyst is deleted, but I can see all of the forms that I created using Muse in the webform section. Is there a fix for this problem? Thanks
This is the page with the forms. http://www.highestgoodclothing.com/login.html

There is a workaround. It takes a little more work, but it is definitely worth it and will solve your problem. I subscribed and learned from tutorials on the www(.)trainsimple(.)com. They have a video series called "Muse CC Business Catalyst Integration" which was very helpful. The issue that everyone on here is referring to is covered in the 3 videos labelled, "Email Sign Up Checkbox", "Moving Muse Webforms to Business Catalyst" and "Email Marketing".
Essentially, what you want to do is create a form in Business Catalyst, turn that form into a module, assign a tag to that module, then put the tag into Muse using Object > Insert HTML. This will solve Muse deleting the web forms everytime.

Does deduplication and Volume Shadow Copy work together?

Hi!
I have a fileserver with five 2TB-disks on it on a 2012 R2 server. I want to enable dedup on it that according to DDPEval.exe would save ~40%. I would also like to enable Volume Shadow Copies on the volumes so the the end user easily could restore removed
files and folders.
I have not found anything from microsoft about use both these features on the same volume, is it supported?
I have done some searching and found that for some users the say that dedup would change so much on the snapshots that it have to delete older snapshots, even though not much data have changed, the dedup force VSC to delete old snapshots.
Any experience with these features co-located on the same volume? Do I need to choose just one of them to use on my volumes?
Thanks!

Hi,
Based on my research, the Shadow Copy and Deduplication could be used together in a Windows Server 2012 R2. The deletion of the old snapshots could be due to the Volume for which the shadow copy being created is more than 64 TB. Volume Shadow Copy Service supports
a volume size of up to 64 TB.
For more detailed information, you could refer to the article below:
Windows 2012 R2 Data Deduplication Leverages Shadow Copies: “LastOptimizationResultMessage : A volume shadow copy could not be created or was unexpectedly deleted”.
https://workinghardinit.wordpress.com/2014/07/01/windows-2012-r2-data-deduplication-leverages-shadow-copies-lastoptimizationresultmessage-a-volume-shadow-copy-could-not-be-created-or-was-unexpectedly-deleted/
Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Safari and adobe flash play

When using safari and try to use adobe flash play a pop up window shows saying I need to download adobe. I have down loaded adobe and installed the latest version and nothing. Adobe works on firefox. Any help?

1. System Preferences > Flash Player > Advanced > Delete All
     Press the "Delete All" button
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
   Download it first.
    Follow the prompts and install it.
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.
    Press " Manage Website Settings" button for more options.
3. Safari > Preferences > Privacy
    Press the button “ Remove All Website Data”.

Ipad shortcuts and Adobe Muse

I am currently building a site with Adobe Muse to be used internally. We are displaying the site on ipads and will be using the "add to homescreen" function to provide an easy link to the site.
Is there a function within Muse / some html that I can add so when a shortcut to the homescreen on the ipad is created, a custom icon will appear instead of the generic "screen captured" one that the ipad used as an icon?
I have seen this function on a number of websites.

Please repost in the Muse forum: http://support.muse.adobe.com/muse

Do Yosemite and Adobe CS5.0 play well together?

I'm a visual designer - both graphic and web. Adobe CS is how I do my work.
I had a disastrous time when I upgraded my (then) new desktop to Mavericks awhile back (it had just come out, right around the time I got my newest machine), was told by some Apple tech that "you can get a free upgrade of Keynote when you upgrade to Mavericks!!!" Was a knee jerk move on my part, caused almost every one of my apps to break since Mavericks was programmed to only work with the latest/bleeding edge versions of everything, apparently. Took me weeks and weeks to right my apps situation with the new OSX, not only my Adobe CS apps, but Powerpoint, my Epson printer drivers, zipping software, etc. etc. the list went on and on. Every time I thought I was good to go, something else broke. Ugh.
Now I've got a client working in the latest version of Keynote, and the latest OSX (Yosemite). I've been holding off on downloading Yosemite since the last debacle, although would be nice (I think - I've also noticed Apple's been denigrating Keynote lately ... tsk tsk) to have the free upgrade to the newest version of Keynote, as well.
My question is this - since I have INSTALLED (not cloud-based. Refuse to go to subscription based ... I want to OWN the copies of my apps) versions of Adobe CS 5.0-55 on my machine (only my INDD is 6.0), will Yosemite play nicely with those apps? And what about Office 2011 for Mac? (I only use PPT from this suite) Anyone have any experience with this, and can you confirm that you did NOT have a problem with these app versions when upgrading to Yosemite? I do not want to go through that mess again!
Thanks.

Sorry folks, should have poked around more before posting my question. Feedback can be found in the link below - in short, I'm NOT upgrading at this point in time. Sounds like the same thing going on with the new OSX as with Mavericks. Cannot afford to wade through hours of troubleshooting and catch up once again! (sigh)
https://forums.adobe.com/thread/1609716?start=40&tstart=0

Does Wordpress and Adobe Muse play well together?

Similar Messages

Maybe you are looking for