Does worst case analysis work with model parameters?

The worst case analysis does not seem tow work with model parameters. I performed a worst case analysis on a simple one transistor amplifier stage. It gives correct answers for resistor tolerances, but for the transistor model parameters it never changes them. I did the same with a diode in the circuit and entered tolerances for the diode parameters and it never used the tolerances.

That's the same message I get. See attached circuit.
Attachments:
FETamp.ms10 ‏96 KB

Similar Messages

  • Why does my imessage not work with only 1 phone number

    Why does my imessage not work with only 1 phone number? It keeps going to imessage and then back to text message

    Both you and the recipient have to have active data connections, and both devices have to have iOS 5 or higher to be able to use iMessage. Also, they both have to have iMessage activated. If that is already the case, there is a possiblility that iMessage is down. It has gone up and down several times in the past week. Check this page for status, and if necessary you can report a problem with a link in the lower right corner. http://www.apple.com/support/icloud/systemstatus/

  • Does OSX 10.6 work with iCloud?

    Does OSX 10.6 work with iCloud? Thought I read somewhere that you cannot connect to iCloud if you are running Snow Leopard.

    No. You need 10.7.2 or later for iCloud.
    Upgrading from Snow Leopard to Lion or Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • Does ipad 4 A1460 work with CDMA ?

    Hi
    I have unlocked ipad 4 from saudi arabia model
    A1460 on the iPad (4th generation) Wi-Fi + Cellular (MM)
    Now I'm In yemen i have few question
    does ipad 4 A1460 work with CDMA network in yemen (YEMENMOBILE) ?
    if it work can i switch b/w CDMA and GSM when i move b/w Yemen and Saudi ?
    can i buy cdma data plan +sim card and install it in ipad ? or there is other way ?

    The A1460 model is infact CDMA capable.
    Maldukhn wrote:
    does ipad 4 A1460 work with CDMA network in yemen (YEMENMOBILE) ?
    Probably not.  CDMA unlike GSM is not unlockable. The Settings for CDMA networks must be provisioned into the CDMA chip at the time of manufacturing, and its very difficult to modify this after the fact.  Also CDMA devices must be registered with the carrier they will be assigned to.  They must exist in the carrier's database beforehand.
    Maldukhn wrote:
    if it work can i switch b/w CDMA and GSM when i move b/w Yemen and Saudi ?
    If the Yemen provider issues you a Sim card, you can insert that into the GSM sim card slot on the iPad and connect to their network that way, again if they support it.   This would not be CDMA but GSM.
    Maldukhn wrote:
    can i buy cdma data plan +sim card and install it in ipad ? or there is other way ?
    No such thng as a CDMA sim card. sim cards are only for GSM.   Again if the Yemen carrier offers sim cards to connect to their network you can insert it into the sim card slot and use their service that way if they support it as such.
    I suggest you contact the Yemen carrier and ask about their device policies. BYOD (Bring Your Own Device) is not normally  an accepted policy with CDMA carriers.

  • Case that works with smart cover on?

    Has anyone seen any shells or cases that work with the smart cover on? I have only come across one.
    Thanks

    SF Bags, aka Waterfield Designs, has several designs made to fit the iPad 2 with the Smart Cover. I, too, have the original Ultimate Exo Sleevecase, but it is a bit large for the iPad 2. They recommend buying the "non-Exo" Ultimate case for the IPad 2.
    One case that I particularly like is the SmartCase, and they make a model that fits with iPad 2 with the Smart Cover; it has a pouch on the back for earphones, etc.. I have a similar one for my iPhone and it is very well-made and offers a lot of protection.
    They have seven different iPad cases and several are designed specifically for the iPad 2 with the SmartCover.
    If you have any questions, you can write them, and they answer them promptly.

  • Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two?

    Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two? also I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?

    Is it possible to have your whole family on one apple id or is it better to have each person have there own?
    Yes, it is possible. 1 apple ID can be associated with up to 10 devices.
    If each has their own does each id have to buy their own music and apps?
    Yes, all purchases are non-transferable.
    How does find my iphone work with one apple id or two?
    Every device associated with one apple ID through Find my iPhone is tied to that Apple ID; Find my iPhone will work in the same way with up to ten devices associated with one apple ID. You cannot enable Find my iPhone for one device across two apple IDs
    I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?
    If you have authorized a computer with the old apple ID, you can transfer old media purchased through the old to other devices via iTunes. This doesn't mean the media purchases through the old apple ID it transferred to the new account. If you plan to make future purchases and don't wish to share them with others, make your own apple ID.

  • DOES THE APPLE REMOTE WORK WITH THE IPOD TOUCH..? WITHOUT A DOCK..

    HI
    DOES THE APPLE REMOTE WORK WITH THE IPOD TOUCH 5TH GEN..? WHITHOUT A DOCK..??
    THANKS ANYONE

    This Apple remote requires a dock since this remote uses IR and the iPod does not ha IR capibility,.
    Manufacturer Information
    Apple Remote with iPod and iPhone: Please note a Universal Dock is required in order to use the Apple Remote with your iPhone or iPod.
    http://store.apple.com/us/product/MC377LL/A/apple-remote?

  • Does the apple remote work with the ipod touch 4th gen?

    Does the apple remote work with the ipod touch 4th gen?

    Yes, but it also requires Apple's Universal Dock to go along with it.  Otherwise, it is useles.
    B-rock

  • HT201335 does the Ipod touch work with the airplay mirroring

    Does the Ipod touch work with airplay mirroring?

    No. Only iPhone 4S and iPad (2nd or 3rd Gen) as it requires more processing power. You can still use airplay with your device though.

  • Does the ipod video work with the original ihome?

    does the ipod video work with the original ihome?

    Welcome to Apple Discussions!
    If you mean this one...
    http://www.ihomeaudio.com/products.asp?productid=10015&deptid=1003
    Them yes. I am using one myself. You may want to purcahse these if it does not come with them (depending on how old it is)
    http://www.ihomeaudio.com/products.asp?productid=10016&deptid=1000
    btabz

  • Does the iPod Mini Work with Windows?

    I am thinking of buying an iPod mini but I don't have an Apple computer. Does the iPod mini work with Windows efficiently? Thanks....

    Hello Ian,
    Can you be really specific about the necessary Windows XP updates needed? I run XP Pro on a rather new computer and just got an IPOD mini. I'm ready to tear my hair out because iTunes seems to crash my computer every time I change one CD for another. iTunes runs REALLY, REALLY slow for me. Also read on the board that iTunes 6.0 and the mini don't work well together. True or not true?
    Thanks - Genevieve

  • Does the Ipod nano work with microsoft XP?

    Does the ipod nano work with MS windows XP? itunes will recognize my Nano 7G, therefor I cannot sync,

    Have you try putting your ipod into disk mode if you need help putting it in disk mode here's a page from apple
    of how to put your ipod nano into disk mode: http://support.apple.com/kb/ht1363

  • Does photoshop elements 13 work with windows vista?

    I have V10 and a Windows Vista PC that is fast and paid for,
    Thinking of purchasing new software from Adobe.
    Does photoshop elements 13 work with Windows Vista?

    No. Windows 7 or Windows 8.x only.
    System requirements | Adobe Photoshop Elements

  • Does Adobe Photoshop Elements work with MacBook Pro with Retina display?

    Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please?
    Have searched Adobe website for answer - most recent is 2013 answer, saying no.
    Contradicted by a staff ember who only referred to Photoshop, not Elements.
    Reason I need it is that iPhoto does not support very high resolution photos - which I have now scanned onto my MacBook and do not want to re-scan!! After 90 minutes at my local Genius bar (lovely folk, very conscientiously searching for an answer...), re-scanning was their final piece of advice.
    Help, please...

    Hello Smis,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with your HP Monitor on your MAC. I am providing you with an HP Support document: Updating a Monitor Driver, where it states under the sub-heading Using HP monitors on a Mac "HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
    This being said all I can advise is that you check to see that the monitor is set to operat at 60Hz and contact Apple for assistance if that does not get your monitor displaying correctly.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Why does flash player not work with facebook?

    Why does flash player not work with fcebook?  Whenever I wish to view a video, I get the message that i need to upgrade my flash player. Then no matter how often I download and install flash player I still get the message that I need to upgrade my flash player.  When I go check which version I have, I always get the message that I have the most current one.  I run Mozilla Firefox with Windows.  I don't know anything else.
    Message was edited by: khettich

    This means you don't have the latest version installed.  Update to 11.9.900.117, and Firefox will allow it: Flash Player Plug-in (All other browsers)

Maybe you are looking for

  • Enhancement on STMS

    Dear experts, I have a requirement to enhance the process of importing transport request, as which whenever the transport request is imported into the target system... the creator of the transport request should be notified... Is there any user exit,

  • Trying to send ANSI escape sequence to a VT-100 term

    I am writing an application that you can telnet to via a vt-100 terminal like the default windows telnet client. I would like to have the ability to clear the screen, set colors etc. I found that the ANSI sequence to clear the screen is <ESC> [2J and

  • The PDF Structure tab

    after I launch the WorkBench (version 9.5), log in, launch the Form Designer for the first time, it always shows me the "PDF Structure" tab (along with the "Hierarchy", "Data View" and "Tab Order"). I can't get rid of it. I can close it by clicking t

  • Exception Handling for FileReference Upload

    Hi There, I try to find a solution for my exceptions I throw on validating the uploaded file. Every time there is a validation or io or whatever problem on the server side I do throw an AMF exception but unfortunatelly the FileRefernce class identifi

  • Deleting assets from one CCN

    Hi, I have created thru CATT script assets under various asset classes ( we follow a sequence) The first asset (say 84200000-0) carries value in it and i retired it . and trying to delete it either through AS06 or thruough program RATSTDEL.But i am u