Does WRT54GP2 work with multiple ViOP providers ?

My question is, Does WRT54GP2 router work with multiple ViOP providers ? Can I use it with a ViOP provider other then Vonage ?
Thanks, John

Yes you definately can , all you need is a VOIP adapter that supports SIP . It's a standard protocol and is supported by all routers and VOIP providers

Similar Messages

How does receive() work with multiple receivers/subscribers?

Hi,
actually I'm using the JMS API to create a lightweight MQ service for Java ME tailored for my purposes. I'm generally familiar with JMS but I have some question to which I couldn't find the answer neither in the API spec nor on google. I think that many of you can answer it.
At first, is it possible to create multiple receivers on the same queue (same or different sessions)? Generally, I though a queue can only have one consumer since the call of receive() will delete the message from the queue so that a theoretical second consumer couldn't get the message anymore. But int the APi docs, it doesn't explain what happens if you call createReceiver() multiple times. Will it throw an exceptions?
A similar question goes for topics. A topic is supposed to support multiple subscribers. When subscribers register listeners, I understand it. But what if they don't and instead call receive() which is available because TopicSubcriber extends MessageConsumer. Is the message also deleted from the queue or is receive not supported for topics and will throw an exception? Will it remain until all subscribers have either called receive on that message or have been notified by onMessage? If yes, what happens if a subscriber doesn't call receive. Does the message stays there forever? What if new messages coming in, will the queue wait until the previous message is completely consumed?
From my point of view, I tend to only allow one receiver for a queue. If the receiver calls receive, the message will be deleted. For topics, I would only allow listeners, not receive() calls. Once the message has been delivered to all subscribers it will be deleted. If I'm misunderstanding the concepts, please correct me!
Thanks a lot!

At first, is it possible to create multiple receivers on the same queue (same or different sessions)? Generally, I though a queue can only have one consumer since the call of receive() >will delete the message from the queue so that a theoretical second consumer couldn't get the message anymore. But int the APi docs, it doesn't explain what happens if you call >createReceiver() multiple times. Will it throw an exceptions?If you have multiple receivers on the same queue then the JMS provider will distribute messages between the two receivers on the basis that each message goes to only one receiver. The exact distribution of messages depends on the JMS provider, and is not mandated by the JMS specification.
A similar question goes for topics. A topic is supposed to support multiple subscribers. When subscribers register listeners, I understand it. But what if they don't and instead call >receive() which is available because TopicSubcriber extends MessageConsumer. Is the message also deleted from the queue or is receive not supported for topics and will throw an >exception? You can consume messages from a topic using either a MessageListener or by calling receive(). They both work in the same way.
Will it remain until all subscribers have either called receive on that message or have been notified by onMessage? If yes, what happens if a subscriber doesn't call receive. Does the message stays there forever? What if new messages coming in, will the queue wait until the previous message is completely consumed?Essentially, if you send a message to a topic then it will be delivered to every subscriber, irrespective of whether that subscriber is synchronous (calling receive() or asynchronous (supplying a MessageListener).
In both cases, the consumer might not actually be ready to accept that message just yet (the applicaiton might not have called receive() yet, or onMessage() is still processing a previous message). In this case the message will be held within the JMS provider in an internal queue of messages designated for that specific consumer. Logically speaking, there's an internal queue for each consumer, rather than an internal queue for the whole topic, though how the provider actually implements this will vary. Note that the concept of each subscriber on a topic having its own internal queue is not one described in the documentation, it's just a way for me to explain it.
If the consumer closes before it actually receives the messages waiting in its queue, and the subscriber is non-durable, then the internal queue will be thrown away. If the subscriber is durable then the internal queue continues to exist and continues to accumulate messages even after the subscriber has closed.
From my point of view, I tend to only allow one receiver for a queue.
If the receiver calls receive, the message will be deleted. For topics, I would only allow listeners, not receive() calls.
Once the message has been delivered to all subscribers it will be deleted. If I'm misunderstanding the concepts, please correct me!Yes, you have slightly misunderstood this :-) I hope my explanation above helps clarify this.
Nigel

How does this work with multiple systems backing up with time machine

I was wondering as Apple states that this will do multiple time machine backups as in multiple computers, how does this do this? I am assumng that it will require me to partition the srive in the unit as multiple partitions. 1 for each time computer with time machine running.

I'm sorry, I'm not quite sure how to interpret your answer so I'll ask for clarification.
Do you mean that the backup belonging to each user will be protected by filesystem perms? In other words Alice's backup will be owned by Alice and only readable by her, ditto for the hyperthetical Bill?
I guess in other words, does Time Machine preserve file ownership perms?

Drag and drop does not work with multiple images

if i try to drag and drop more than one image, nothing happens, no activity at all. i think i had this problem on another computer and it had something to do with the fonts. i can not remember exactly thanks iphoto 6

Go to font book and use it to make sure the helvetica font is enabled - disable and re-enable it if necessary.
Regards
TD

Auto-Detect Screen Resolution Does Not Work Across Multiple Monitors With Different Resolutions

Hi,
The Acrobat Pro DC (15.007.20033.2203) auto-detect screen resolution feature does not work with multiple monitors at different resolutions. Acrobat looks fine on my hidpi primary laptop display (Razr 14" 2014) but is completely unusable if I drag or extend the application to a standard HD resolution secondary monitor. Dragging Acrobat from my primary desktop display to the secondary display causes the UI elements to become 2x as large as they should be and makes Acrobat unusable.
Is there a way to make Acrobat auto-detect the display that it is currently on?
Thanks!
-Donald

To prevent it from happing again, you can
1. go to the Mouse preference and turn off the scroll zoom feature.
2. go to the Universal Access preference and disable the zoom features.

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

Working with Multiple Files in Workspace Layout

If I was working with multiple files in the workspace layout, they each used to be available for selection from a tab. Now I can either cascade the files horizontally or vertically - but not have them appear in a tab across the top of the workspace layout.
Does anyone know how to set the workspace to present multiple files in tabs? I have CS3.

Tanya,
This may not help, but the times when that happens to me is when I go too fast and some operations haven't finished. I then try to select a file that hasn't completed and the file I select is in the process of having the data updated. The worst is when it is trying to render as I am doing something.
I hope this helps some.
Mel

Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard

I originally posted this question here:
answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
and was asked to post it on this forum...
I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power. I have finally gone back the previous version 9926, which has its issues but no where near as bad
as not having any network connectivity! Does anyone have this issue and a workaround?
Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.

Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
this... Thanks!
I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
(but I suspect not just the only culprit) in this above mentioned problem...
10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop.
Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
that has happened with the Cisco software install attempts under 10041.
Another note: CISCO Anyconnect also has the issue.

Publication for Deski report with multiple data providers

Hi,
Has anyone been able to get a publication working that uses a Deski report with multiple data providers as the source? I'm trying to get a publication working that uses dynamic recipients and personalization. When I try to schedule the publication, I get the error "Object not found".
Thanks,
Debbie

Debbie,
That's standard.
It's useful for emulating outer joins in reports.
Say you've got a sales report where you want to display all 12 months of the year in a crosstab whatever month you run in.
We're only in May at the moment though. With one data provider (SALES), you'll get a crosstab with just up to May for your months.
If you create a separate data provider called MONTHS to return the months in the current year, you will then have a merged dimension of YearMonth in both.
In your crosstab if you just use YearMonth you'll get just the five months. If you qualify it with its data provider name (in our case MONTHS), you'll see the full twelve months shown.
I hope that clears it up for your.
Regards,
Mark

Why is scrolling not working with multiple youtube embeds layed out vertically in a stack on one page?

Why is scrolling not working with multiple youtube embeds layed out in a stack on one page?

Hi ,
This is a sort of performance issue , because your program takes more than the max time set for the program to execute in foreground.
There are many stuff in program which will hamper your performance.
I will list down a few
1. SELECT *
FROM konp
INTO CORRESPONDING FIELDS OF TABLE konp_itab
FOR ALL ENTRIES IN a363_itab
WHERE knumh EQ a363_itab-knumh
in this statement you are using for all entries a363_itab , but before this statement you are not checking if the table has any entry or not , please do remember that for all entries has this characterstic , that if you internal table does not contain any record , then all the records are selected from the database table. So in this case if you table a363_itab is empty , so what you want is no data must be seelcted from table konp , but what will happen is all the records in KONP will be seelcted.
2. While retreiving data you are using seelct * even though you do not require all the fields , an example is
<b>SELECT *
FROM mkpf
INTO CORRESPONDING FIELDS OF TABLE mkpf_itab
FOR ALL ENTRIES IN mseg_itab
WHERE mblnr EQ mseg_itab-mblnr.</b>
in this your internal table contains only 2 fields
<b>mblnr LIKE mkpf-mblnr, "Number of Material Document
bldat LIKE mkpf-bldat, "Document Date in Document</b> , but to get these 2 fields you are selecting all the fields of the table.
3. In select you are using into corresponding fields of table , it is not a good practice., so please avoidd it.
Please understand that you must try to reduce the access to your database tables and try to keep it minimal , because this same thing may happen becasue data in DEV is very less compared to the volume of data in production , so a program working in DEV will take much more time in PRD if not written properly and may result in timeouts , as in your case.
Please try to make chanegs to the prorgam and see if it works.
In case you have more queries , please do revert back.
Regards
Arun
*Reward points if replay is helpful

Maintain performance while working with multiple shape layers (~50 )

Hey guys, I've been working on some projects lately where I need to animate a lot of shape layers cascading, arraying, with various animation properties. When I get to the point of using 30-60 or so shape layers, and they're all doing some kind of scale, position, etc. animations, my computer slows to a complete crawl. This then forces me into using a single shape layer and the repeater functions. These can work well sometimes, and don't hamstring the flexibility too much, UNTIL you need to incorporate varying colors. At that point, I usually switch my shape layers to masks and place a layer below with varying colors as needed. The shape animations then reveal those colors, but this doesn't work for a complex object that in itself requires many colors. Sooo...
What kind of workflows do you all have for working with multiple semi-complex objects at once? I figure I must be missing something, because this has gotten really limiting. Is everyone just working with 256GB of RAM?
FYI, my computer specs are:
2 x 2.66 GHz 6-Core Intel Xeon
32 GB 1333 MHz DDR3 ECC
ATI Radeon HD 5870 1024 MB
OS X 10.9.4 (13E28)
Thanks!!

Pre-comping can speed up your previews if you are using disk cache, but nothing will speed up your first ram preview or a ram preview after a keyframe change except a better optimized system. All it takes to slow things down is one effect or a footage file that causes AE to start consuming memory and processor power.
As a test I just created a gradient filled rectangle, added rotation keyframes, duplicated the layer so I have 64 copies on my Mac Mini and tried a ram preview compared with the same comp with only 1 layer. Almost no difference in the time it took to preview 10 seconds. Threw in a scale transform for all layers and again, not much difference between one shape layer and 64. To make things much harder I change the rectangle to a Polystar and animated everything in the Polystart transform properties, set up a composition with 128 duplicates and a comp with one layer. 2.5 seconds for a ram preview at quarter rez for a single layer, 10 seconds for a ram preview for 128 layers. That's more than acceptable to me for a two year old Mac Mini with 16 gb of ram. Increasing the zoom factor to 50% with Resolution set to Auto doubled the ram preview time which was still acceptable.
This makes me wonder what else is going on in your composition. Any effects or other things going on? Have you optimized your system for maximum performance? There are links with suggestions for doing that all over this site as well as the Adobe recommendations found here: Optimizing After Effects Performance

Does dbxml work with db java edition

hello all:
I am new to dbxml, I found the java API of dbxml must deployed with libdbxml_java*, libdbcxx* libraries.
does it working with pure java implementation, je-?-?-?.jar.

DBXML code is written in C++ with difefrent bindings for multiple languages, like Perl or Java. Therefore DB XML utilizes C++ version of BDB and can't use BDB Java Edition.
Vyacheslav

Final Cut Pro does not work with Yosemite. Can it be fixed?

Final Cut Pro does not work with Yosemite. Can it be fixed?

Hi Tom, I don't know if you can help me.
I'm using Final Cut version 10.1.4 with Yosemite 10.10.2 and whenever I open FCP it opens for about 5 seconds (not allowing me to click anywhere) before closing with the message "Final Cut Pro quit unexpectedly. click reopen to open the application again. This report will be sent to apple automatically." I have tried opening it multiple times and the same thing has been happening over and over again and i've tried everything I could find on the internet and nothing is working.
HELP.
Jada.

DB Adaptor import table option does not work with the AS400 DB

1. The DB Adaptor import table option does not work with the IBM i-series(AS/400) tables(Both in ESB and BPEL).
2. Also I was not able to import tables from multiple databases into
the same BPEL project.

Both of these issues work in preview version. My earlier posting was based on beta version testing.

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

Does WRT54GP2 work with multiple ViOP providers ?

Similar Messages

Maybe you are looking for