Does x-fi plat include movie playing softwa

More specifically, is there an app in there that will play movies (DVD's) with Dolby and/or DTS?
I know there are programs like PowerDVD, but that would require money for the extra codecs, etc.
Thanks for any help.

<FONT color=#ff6600>It does not "play"DVD movies as it is just a user interface for whatever DVD decoder you have installed.
<FONT color=#ff6600>IF you do NOT have any DVD software installed then HOW can it"play"them?
play back DVD movies from your DVD-ROM dri've. This is only supported if InterVideo? WinDVD?, CyberLink PowerDVD? or any other DirectShow? compatible DVD decoder is installed on your computer.

Similar Messages

  • I have 2 laptops both with iTunes installed but on one my source list includes 'Movies' and the other 'films' does anyone know why this would be?

    i have 2 laptops both with iTunes installed but on one my source list includes 'Movies' and the other 'films' does anyone know why this would be?

    sorry all - disregard I've identified the issue in the language settings with one set to 'English - United States' and one to 'English - United Kingdom' - now fixed.
    Cheers

  • Keynote does not export Qucktime embedded movies within slides? Won't play

    I Have a Quicktime movie within one of my slides and when I export a Quicktime .mov file, that particular slide does not run the quicktime movie within it, just stays on the first frame?
    any ideas where I am going wrong?
    Message was edited by: thecount

    I think this is a limitation of the export -> quicktime option
    Keynote does all sorts of tricks to keep the file sizes small- and one thing really gets butchered are embedded quicktime movies- I have two almost show-stopper frustrations with this:
    1- quicktime movies do not loop when exported to quicktime (limitation of sprite track? will look around in live stage pro)
    2- all builds and movies must play in entirety before you can click through- this makes being able to skip around very cumbersome especially if using an indexed presentation

  • When I try to include a white and black photo in a iMovie the result is a black totaly black picture which does not show in the movie. Why? Can it be fixed?

    When I try to include a white and black photo in a iMovie the result is a black totaly black picture which does not show in the movie. Why? Can it be fixed?

    The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
    Other than that, what version of iPhoto do you have? Assuming 09 or later try
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD
    P.S. Please don't type in block capitals. They are harder to read and on the forum it looks like you're having a tantrum

  • HT204370 why does my video and sounds not play at the same time when watching movies

    why does my video and sounds not play at the same time when watching movies

    Welcome to the unity.
    Upon which device are you watching your movies and are you using a home theatre system for your audio.

  • Subscribe to photo feed rss does not include movies

    I'm subscribing to a photo feed from my pogoplug. It gets all the photos from the rss feed, but skips everything else (i.e., movies). Is that normal, or should it be capturing everything in the feed, including movies?

    have you tried the PogoPlug support?
    Support
    For all support requests, please contact us at [email protected] We will do our best to get back to you within 4 hours during normal business hours, and a little longer on nights and weekends.
    Get help and connect with other users on our community website.
    LN
    Message was edited by: LarryHN

  • MOVs play fine, but Premiere won't play the audio

    I have a bunch of MOV files (from a cheap digital camera) that will play fine on say VLC, and they import into Premiere CS5, but when I play them in Premiere, or put them into a Sequence, the video plays but the sound turns to a high pitched beep after 1 second. Every file does this, and all other files (including MOVs from different cameras) are working fine in the same sequence. Any ideas?

    I had a similar problem, I'll tell you how I solved it.  Understand that I am a newbie at video editing and Premiere Pro.  I shot videos on a DSLR (.mov) and then transferred them to my computer.  I then imported them into Premiere CS6.  The videos played fine, and the sound bars indicated that audio was playing, but there was no sound.  The clips I imported played fine in Windows Media Player.  I did everything suggested on the forums, but to no avail.  Then I thought of something no one else had suggested, and it worked!
    I ordered my Rain Stratus computer already set up with Premiere CS6 installed.  When I opened a new project, it by default chose Black Magic Design presets, since that is the video card I have.  Being a newbie, I just went with that.  But since the video I was importing was not captured by my Black Magic video card, it was the wrong choice.  It took awhile to figure out, but I finally realized I needed to choose Digital SLR as the sequence preset when I created a new project.  Then the audio worked!
    One more thing I had to do, though, before it worked: in PremierePro, go to Edit/Preferences/Audio Hardware.  I had to change the hardware from Black Magic Audio to Premiere Pro WDM Sound, click ASIO settings, choose my speakers, and then check the box marked "device 32-bit playback" (even thought I have a 64-bit computer.)
    I hope that helps someone else from going through the same frustration.

  • Movie playing back to front in Firefox

    Hi
    Im having a strange issue playing a flash movie.
    It plays no worries in IE, but when you try it in firefox it displays back to front.
    Both flash plugins in both browsers are the same version.
    Any way I can make the movie play properly in both browsers?
    Ive posted the code here
    http://www2.cpprint.com.au/flash.html
    Robbie

    I share your concern.  It is possible to download and install the Officejet Pro 8600 Plus driver as described in the post here.  The HP Pro 8600 Plus hardware is very similar to the Officejet Pro 8620, but the 8600 driver does include a page order option in the Advanced tab of the driver
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • DVDPlayer not recognizing DVD. I have an IMAC (10.7.4) using DVDPlayer (vers. 5500.26.11) and will not recognize/play a dvd movie...it thinks it is a blank dvd.  The dvd movie plays fine on my Mac Book Pro (10.6.8) on the Pro's DVDPlayer (vers.5.4).

    IMAC DVD Player does not recognizing dvd movie . I have an IMAC (10.7.4) using DVDPlayer (vers. 5500.26.11) and it will not recognize/play a dvd movie...it thinks it is a blank dvd. The IMAC will play rented dvd movies.   The dvd movie plays fine on my Mac Book Pro (10.6.8) on the Pro's DVDPlayer (vers.5.4) abd in my external Sony DVD Player  The dvd move was made/burned on a PC.   Why will a dvd movie play on my Macbook Pro and not my IMAC?

    Hello:
    This is not an area I have much experience in......I rarely insert DVDs and I have never had a similar problem.
    When the DVD is in the drive (and DVD players is open) click on File>get disk info.
    Barry

  • HT203175 Reloaded Itunes on an XP machine. Reloaded because Itunes would not open. Now when I play a movie that is in my library, The movie plays for aprx. 60 seconds and then reverts back to my Itunes library. Any ideas on a cure?

    Reloaded Itunes on an XP machine. Reloaded because Itunes would not open. Now when I play a movie that is in my library, the movie plays for aprx. 60 seconds and then reverts back to my Itunes library. Does it with all movies in the library, Most where downloaded from Itunes. Any ideas on a cure?

    This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • Images enlarge and movies play in iweb, but not when published

    Everything works fine in the program, but when published to site or folder, photos are there, but won't enlarge. The movie thumbnail shows with the little movie icon in the corner, but clicking does nothing.

    On all of your pages  you have an image that appears to cover the photos preventing them from being clicked on.
    Move it to the back via the Arrange menu or get rid of it.
    How did you add the videos to the page?  If you just dragged them onto the page or used the movie page then iWeb will have to upload them when it publishes the page and all will load when the page is accessed which can cause long loading time for the page. 
    Also thre are some files missing for the TV page as seen in the Activity window (Command+Option+A) for the page. Publish the site to a folder on your hard drive and open it there.  Check to see if the movies play OK (after you fix that overlaying image issue). If they do then the problem lies in the uploading of the files.
    If those files are Quicktime then the viewers must have Quicktime installed on their computer in order to view them.  See this page on Roddy's iWeb for Musicians site for methods of presenting movies that will let all computers view them: Player-Showcase.html.  See the list at the right for different players you can use.

  • Why won't my .mov or my .mp4 movie play in Keynote 4.0?

    Others on the forum seem able to play movies in their keynote projects. I can't.
    When the slide I have placed the movie comes up, the movie plays for a second or so and then quits while the next slide comes up. What am I doing wrong? The movie is just over 2 minutes long. Why won't it play?
    Any help will be appreciated. I'm new to using Keynote. I've enjoyed making builds with music on mulitiple slides, but dang it, I can't seem to make a simple .mov or a .mp4 movie work. I'm guessing I'm missing something very basic. Please help.

    If I am understanding your problem correctly, this is unfortunately a bug (or simply an unsupported feature) in Keynote that has not been corrected since the very beginning. Currently, the only way to have a movie play properly through is to:
    1) make sure the slide containing the movie has no delay in the transition to the next slide, and
    2) you will need to create transparent objects (like a square), each building in a set amount of seconds (60 seconds max allowable per object). For example: For a three minute movie, you will need to create an object, build it in over 60 seconds. Then copy and paste for the second object only this time, set it to start building in AFTER the previous build. Copy and paste again, set to build after the previous build, only this time, you will need to adjust the 60 seconds down to whatever fits. When the last object is done building, the slide will transition regardless of whether or not the movie is done playing.
    It is a complete waste of time as trying to determine the duration of the last object to build in is totally trial and error. I am amazed that this simple feature (playing a movie within a slide) is hampered.

  • How to restart movie play using AirPlay

    I have an iPad 2 connected to Apple TV which is connected to our HDTV.
    Click Video. Select a Movie. Start playing the movie.
    Click the AirPlay control and send the movie to Apple TV.
    After a couple of minutes the iPad screen will go dark.
    If I double tap the Home button the Video app appears.
    There is a 'Slide to Unlock' slider at the bottom.
    And at the top there are controls for the movie play. Volume, Skip Forward, Skip Back, and Pause.
    I tap the Pause button (without using the 'Slide to Unlock' slider).
    The movie stops playing.
    Now I want to restart the movie. But the 'Play' button does not respond.
    The Volume and Skip buttons are active. But the Play isn't.
    The only way I can get the movie to start playing again is to slide the 'Slide to Unlock' slider.
    Then tap the Play button.
    Is this the way it is supposed to be working?
    I find having these controls available from the double tap of Home extremely convenient.
    I'd just like to know if there is a way to restart the play without unlocking the screen.
    Thanks for any help or advice!

    I called Apple Support on this.
    This is working like it is supposed to.
    The 'Resume/Play' button is disabled until the screen is unlocked.
    The other buttons will work.
    A suggestion by the agent was to change the screen lock controls when using this function.
    Now that I understand that this is the expected behavior I know what to do.

  • Will movies play okay on the ATV2 if they are choppy when they play on the computer?

    I would like to buy an ATV2. I do have some dvds that I have already ripped to a computer, but the videos are choppy when played with itunes on that computer. The movies play fine on other computers. Will the ATV have problems pulling video from the computer?

    Johnyboy80 wrote:
    Thank you for the swift reply. I went ahead and bought it. Let me tell you, this thing is magic. The movies play choppy on the PC like I said, but play flawlessly on the ATV even while the PC is encoding another movie.
    Sounds as though the PC is struggling to decode the movie on the fly - h264 is more intensive to encode/decode than MPEG2 - however the underlying bitrate for AppleTV compatible files is quite low and most computers would be able to stream them even if they struggled to decode them - appleTV does the grunt work of decoding and displaying so the PC is not stressed by just streaming.
    AC

  • Why doesn't my embedded movie play when I export s a video?

    I am trying to export my project in keynote 09. However, the embedded movie does not export and when the movie plays it gets stuck on that slide where the embedded movie is. I even tried opening the file with 08 ( I shouldn't have upgraded) and it can't be opened. Any advice?
    Thanks!
    OS 10.8.4

    From my experience, most Windows users do not have QuickTime player installed on their machines.
    The alternative is to provide PDF or PowerPoint, but the software for these are not installed by default, and  of course Keynote is a Mac only application, so you are very limited in how they will easily view your presentation.
    I always provide Windows Media Video files for PC users, this requires separate software to be purchased to convert Quicktime to WMV.   Fip 4 Mac Studio
    I have had on occaision to supply clients with JPEG image files as this was the only method they could view the presentation as they were prevented from installing additional software.
    You will need to ask your users if they are prepared to install additional software and if they want video or a slide presentation.

Maybe you are looking for