Does XA52P Sata drive work with Nforce3 250 boards??

i have Msi's K8N Neo Platinum Nforce3 250gb board.  It has a native Sata controller on the chipset.  Does anybody know if Msi's new Sata drive will work on this baby??

I just bought the XA52P and it works fine with my K8N Neo Plat.
Here's another review of it, just incase anyone is interested.
http://www.hardwarezone.com/articles/view.php?cid=29&id=1207
Just sharing some info... the XA52P doesn't read CDs at full speed unless you hold down the power button for 5 seconds and the LED stays on.
The active panels are pretty thick and looks kinda out of place next to normal optical drives.

Similar Messages

  • XA52P SATA drive works with RS480M2-IL

    [I have been using XA52P Sata drive with Rs480M2-IL & it works great. Though it goes in PIO mode at times if I attach my Hitachi 160 GB SATA to Port 1 & XA52P to Port 2. So I've interchanged their port connection.
    My PC configurations:-
    winXpPro Sp2 on
    RS480 M2-IL
    Athlon 3200+
    512MB DDR 400 Single DIMM
    Hitachi 160 GB SATA
    XA52P Combo.
    Any suggestions are welcome
    [email protected]

    Thanx for replying,
    I'm using Bios version 3.8, and although my drivers are not very latest but they surely are later than those supplied with the mobo. The Combo goes in PIO mode often when it tries to access some data CD when it has been attached to SATA 2 port.
    I'm running 32 bit XP Pro and the controller mode is set to IDE controller.

  • Does Adobe Photoshop Elements work with MacBook Pro with Retina display?

    Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please?
    Have searched Adobe website for answer - most recent is 2013 answer, saying no.
    Contradicted by a staff ember who only referred to Photoshop, not Elements.
    Reason I need it is that iPhoto does not support very high resolution photos - which I have now scanned onto my MacBook and do not want to re-scan!! After 90 minutes at my local Genius bar (lovely folk, very conscientiously searching for an answer...), re-scanning was their final piece of advice.
    Help, please...

    Hello Smis,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with your HP Monitor on your MAC. I am providing you with an HP Support document: Updating a Monitor Driver, where it states under the sub-heading Using HP monitors on a Mac "HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
    This being said all I can advise is that you check to see that the monitor is set to operat at 60Hz and contact Apple for assistance if that does not get your monitor displaying correctly.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Does Labview v6.1 work with WinXP?

    Does Labview v6.1 work with WinXP? I know 7.0 is compatable but it is
    missing the DAQ vi library.

    Hi,
    LabVIEW 6.1 is compatible with Windows XP. The DAQ VIs may be missing
    since they are intalled by the DAQ driver. If you do have the driver
    installed is just a matter of runnign the NI-DAQ installer again from
    Add/Remove programs, select modify and make sure that support for
    LabVIEW 6.1 is selected. This should bring the DAQ VIs back up.
    let me know if you have any further questions.
    Regards,
    Juan Carlos
    N.I.

  • Will a BluRay RW drive work with a MacPro?

    Will a BluRay RW drive work with a MacPro?
    Internal SATA or external FireWire/USB?
    Thanks,
    SyBBBB

    Our organization has several Blu-ray drives built into our Mac Pros. They work great.
    http://www.mcetech.com/blu-ray/
    Others make them also.

  • Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two?

    Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two? also I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?

    Is it possible to have your whole family on one apple id or is it better to have each person have there own?
    Yes, it is possible. 1 apple ID can be associated with up to 10 devices.
    If each has their own does each id have to buy their own music and apps?
    Yes, all purchases are non-transferable.
    How does find my iphone work with one apple id or two?
    Every device associated with one apple ID through Find my iPhone is tied to that Apple ID; Find my iPhone will work in the same way with up to ten devices associated with one apple ID. You cannot enable Find my iPhone for one device across two apple IDs
    I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?
    If you have authorized a computer with the old apple ID, you can transfer old media purchased through the old to other devices via iTunes. This doesn't mean the media purchases through the old apple ID it transferred to the new account. If you plan to make future purchases and don't wish to share them with others, make your own apple ID.

  • DOES THE APPLE REMOTE WORK WITH THE IPOD TOUCH..? WITHOUT A DOCK..

    HI
    DOES THE APPLE REMOTE WORK WITH THE IPOD TOUCH 5TH GEN..? WHITHOUT A DOCK..??
    THANKS ANYONE

    This Apple remote requires a dock since this remote uses IR and the iPod does not ha IR capibility,.
    Manufacturer Information
    Apple Remote with iPod and iPhone: Please note a Universal Dock is required in order to use the Apple Remote with your iPhone or iPod.
    http://store.apple.com/us/product/MC377LL/A/apple-remote?

  • Does the apple remote work with the ipod touch 4th gen?

    Does the apple remote work with the ipod touch 4th gen?

    Yes, but it also requires Apple's Universal Dock to go along with it.  Otherwise, it is useles.
    B-rock

  • HT201335 does the Ipod touch work with the airplay mirroring

    Does the Ipod touch work with airplay mirroring?

    No. Only iPhone 4S and iPad (2nd or 3rd Gen) as it requires more processing power. You can still use airplay with your device though.

  • Does the ipod video work with the original ihome?

    does the ipod video work with the original ihome?

    Welcome to Apple Discussions!
    If you mean this one...
    http://www.ihomeaudio.com/products.asp?productid=10015&deptid=1003
    Them yes. I am using one myself. You may want to purcahse these if it does not come with them (depending on how old it is)
    http://www.ihomeaudio.com/products.asp?productid=10016&deptid=1000
    btabz

  • Does the iPod Mini Work with Windows?

    I am thinking of buying an iPod mini but I don't have an Apple computer. Does the iPod mini work with Windows efficiently? Thanks....

    Hello Ian,
    Can you be really specific about the necessary Windows XP updates needed? I run XP Pro on a rather new computer and just got an IPOD mini. I'm ready to tear my hair out because iTunes seems to crash my computer every time I change one CD for another. iTunes runs REALLY, REALLY slow for me. Also read on the board that iTunes 6.0 and the mini don't work well together. True or not true?
    Thanks - Genevieve

  • Does the Ipod nano work with microsoft XP?

    Does the ipod nano work with MS windows XP? itunes will recognize my Nano 7G, therefor I cannot sync,

    Have you try putting your ipod into disk mode if you need help putting it in disk mode here's a page from apple
    of how to put your ipod nano into disk mode: http://support.apple.com/kb/ht1363

  • Does photoshop elements 13 work with windows vista?

    I have V10 and a Windows Vista PC that is fast and paid for,
    Thinking of purchasing new software from Adobe.
    Does photoshop elements 13 work with Windows Vista?

    No. Windows 7 or Windows 8.x only.
    System requirements | Adobe Photoshop Elements

  • Why does my imessage not work with only 1 phone number

    Why does my imessage not work with only 1 phone number? It keeps going to imessage and then back to text message

    Both you and the recipient have to have active data connections, and both devices have to have iOS 5 or higher to be able to use iMessage. Also, they both have to have iMessage activated. If that is already the case, there is a possiblility that iMessage is down. It has gone up and down several times in the past week. Check this page for status, and if necessary you can report a problem with a link in the lower right corner. http://www.apple.com/support/icloud/systemstatus/

  • Why does flash player not work with facebook?

    Why does flash player not work with fcebook?  Whenever I wish to view a video, I get the message that i need to upgrade my flash player. Then no matter how often I download and install flash player I still get the message that I need to upgrade my flash player.  When I go check which version I have, I always get the message that I have the most current one.  I run Mozilla Firefox with Windows.  I don't know anything else.
    Message was edited by: khettich

    This means you don't have the latest version installed.  Update to 11.9.900.117, and Firefox will allow it: Flash Player Plug-in (All other browsers)

Maybe you are looking for