Does XI has a DB ?

Hi.Good Morning. Does XI has a DataBase ? Suppose if a File is sent from the Source system, but the Target system is not ready to accept the File and the process is a failure. Then what will happen to the Original File ? Will that be stored in XI so that it can be sent later ? Second Scenario. Or just half the records were successfully sent from a file. How to send the remaining records with out duplicating the records ? How to execute or run a Scenario automatically which was a failure earlier ?

Hello,
1. Yes XI has it own database and yes if the process is a failure you can resend the file from the Runtime Workbench (http://<server>:<port>/rwb -> Message Monitoring).
2. XI can save the orignal file in an archive folder if you want (configure it in the sender file adapter).
3. Re-send only the part of the failure record is not possible. But you can use the temporary mode configuration in your receiver adapter. This create a tmp file and when all data are write XI release it.
4. I am not sure it was a good idea to re-execute automatically a failure scenario. I think it's better to use the automotically resend function of the adapter. You can configure it in the Runtime Workbench -> Component Monitoring -> Adapter Engine -> Communication Channel Monitoring.
Hope this help.
Regards,
Chris
Message was edited by:
Christophe DUMONT

Similar Messages

I got a macbook pro 2008 and can not back up using time machine. it eject my external hard drive everytime. does someone has a fix???

i got a macbook pro 2008 and can not back up using time machine. it eject my external hard drive everytime. does anybody has a fix???

Does your external hard drive have it's own power supply? It should.
Is your external hard drive formatted with the NTFS file system? It won't work.
It needs to be formatted either with Mac OS Extended or FAT32.
(There are drivers available to add NTFS support to OS X but their quality is unknown, especially the "free" ones.)

IPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them

iPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them. Signal is strong and call quality (me hearing the other) is still very good but it looks as if I’m going on mute while I’m not muting my iPhone. When dropping the call and re-dialing it works fine again. It’s a brand new iPhone 5S but it now happened already 4 or 5 times in 2 days.
It feels like a hardware/iOS problem and not a network issue. It happend with iOS7.03 but I just see 7.0.4 is available so will install that one now.
Thanks in advance for feedback
Best regards,
Marco

Hello Jeff,
Thank you for providing so much detail about the issue you are experiencing with the audio on your iPhone. I would be concerned too if the audio on my iPhone was not working unless using speaker phone. I found an article with some steps to take when you are experiencing issues like this:
iPhone: Can't hear through the receiver or speaker
http://support.apple.com/kb/TS1630
Thank you for using Apple Support Communities.
Best,
Sheila M.

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

16bit? Pixels extending beyond the canvas? (from a crop with delete unused pixels turn off). Have you previously been saving PSD files?
IME you sometimes have to tell Photoshop that the first save of a session is JPG, and it remembers from there on. The way to 'tell' Photoshop that JPG, or PDF, or PNG etc are now your preferred format is to Ctrl (Cmd) click on that format in the Save As drop down list. So long as the file does not have parameters that your chosen format does not support, then this should work for you.
[EDIT] Just noticed that you did include 'Crop' in the subject line. Do you have 'Delete cropped pixels' checked?

After upgrading to Yosemite and Aperture 3.6 all the library icons are shown plain. Does anyone has a hint?

After upgrading to Yosemite and Aperture 3.6 all the library icons are shown plain. Does anyone has a hint?

If it is still slow after removing Symantec, you may need a RAM upgrade. Yosemite can run very poorly on older machines with only 4 GB RAM.

I have a canon mf5940dn, it is connected via USB to my macbook air, and yet, when i want to print smith, it says the printer is not connected. does anyone has any idea why? is there a guide to do it properly?

I have a canon printer mf5940dn, it is connected via USB to my macbook air, and yet, when I want to print smth, it says the printer is not connected. does anyone has any idea why? is there a guide to do it properly?

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Hello, I just got an iPhone 4S and it seems that the bluetooth function in it doesn't work. I tried few times to pair it to other non Apple phones and it never worked. Does anyone has an idea how to solve the problem? Tks.

Hello, I just got an iPhone 4S and it seems that the bluetooth function in it doesn't work. I tried few times to pair it to other non Apple phones but it never worked. Does anyone has an idea how to solve the problem? Tks.

This is not a feature of iPhone, iPad or iOS.
Bluetooth is supported for stereo headsets/speakers, handsfree telephone
devices/headsets, some keyboards, some peer-to-peer apps from the
app store and internet tethering where provided by the carrier.
Other than this it will not connect to a phone/computer/device. (thanks to ckuan for the wording)

TS1702 After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.

After updating iphone 4s to 6.1 version my battery percentage stood at 1 percent. Does anyone has same problem? Or its update bug?

After updating iphone 4s to 6.1 version my battery percentage stood at 1 percent. Does anyone has same problem? Or its update bug?

THIS is "quite a few": https://discussions.apple.com/thread/3391947
As are these:
https://discussions.apple.com/thread/3391947?tstart=0
https://discussions.apple.com/thread/3484755?tstart=0
https://discussions.apple.com/thread/3481668?tstart=0
https://discussions.apple.com/thread/3518760?tstart=0
https://discussions.apple.com/thread/2755090?tstart=0
https://discussions.apple.com/thread/3507356?tstart=30
https://discussions.apple.com/thread/3482083?tstart=60
https://discussions.apple.com/thread/3492588?tstart=60
https://discussions.apple.com/thread/3397244?tstart=90
And older ones:
Battery Meter/Life Problems with 4.0.2
4.0.2 guzzling my battery. Your's too?
4.0.1 battery life
Battery runs out very quicky in iOS 4.0.1
Battery nearly nonexistant after 4.0 upgrade
Dead battery after few hours on standby using 4.0 software
3.1.3 battery problem
OS 3.1.3 battery issues
3.1.3 upgrade - shortened battery life?
Battery life cut after 3.1.3 update on iPhone 3G
3.1.3 Firmware is a battery killer - how do I back out this upgrade?
Poor battery life with iPhone 3G running 3.1.2
3.1.2 EXTREME battery drain - what gives?
3.1 Battery nightmare
iPhone 3GS with fw 3.1 – battery life gets even worse
Battery Issues with 3.0.1
BATTERY drain with 3.0
upgrade to 3.0 drains my battery
Battery Drain after Update 2.2.1
Battery Life Radically Decreased after 2.2.1 Firmware Update
As you can see, battery issues have been common since the first iphone, frequently reported after an upgrade, but not always. So to blame a specific version doesn't describe the problem sufficiently to find a resolution.

Does Premier have an Screen recorder if not does adobe has one in the Cloud ?

Basically Does Premier have an Screen recorder if not does adobe has one in the Cloud ?
Thanks !

Adobe Captivate is the one but it's not in the Cloud. Camstudio is also very good at that.

Does firefox has the clip feature that internet explorer has for clipping a article and pasting it to a document.

internet explorer (my os is win 8) has a feature that allows the user to clip and article and paste it to a document, does mozilla has the add on comparable to this, if so where is it and how do I acquire it.

Could you describe where you find this in the menu in IE and what it's called?
Traditionally, to copy and paste the contents of a web page, you first select the portion of the page you want, then copy using Ctrl+c (or right-click > Copy), then switch over to the receiving application and paste using Ctrl+v (or right-click > Paste).
However, there might be an add-on that gives you a better result depending on what you're looking for.

Does SAP has a GUI screen painter or not? If yes what operating systems is

Does SAP has a GUI screen painter or not? If yes what operating systems is it available on? What is the other type of screen painter called?

SE51 is the transaction code for the screen painter.
Check this link for <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/d1/801b50454211d189710000e8322d00/frameset.htm">Screen Painter</a>
Regards
- Gopi

Does anyone has the same scrolling problem? My macbook air 13''(2010) running lion, when files in a folder arranged by kind, every scrolling paused for a second..?

does anyone has the same scrolling problem? My macbook air 13''(2010) running lion, when files in a folder arranged by kind, every scrolling paused for a second..?

does anyone has the same scrolling problem? My macbook air 13''(2010) running lion, when files in a folder arranged by kind, every scrolling paused for a second..?

Does somebody has a driver for canon IP4600 series which works on OS X Mavericks?

Everytime I try to use my Printer apple tries to configurate first. After waiting some time they are telling me that the software-website is not online at the moment.
Does somebody has an idea how to use the printer? Would be great
Thanks
Julius

Have you looked at the other Canon posts here and tried to download the driver from the Australian Canon site? See in particular PAHU's posts.
http://support-au.canon.com.au/contents/AU/EN/0100491502.html
Hope this helps.

Why does iphone has common volume control for ringer as well as Alarm?

Why does iphone has common volume control for ringer as well as Alarm? which is quite unusual. For Exp, In case i lower down my ringer for some reason instead of silent and forget to increase before i sleep, my morning alarm also remains at the same ringer level volume at which i can miss the alarm. Is it due to some specific reason or i have missed something to change in settings. Other phone like Samsung etc, they have separate volume control for ringer and to an extent, Nokia rings for Alarm even if the battery is completely discharged.

I have booked an appointment at my nearest Genius Bar which is 40 minutes away next week, so do I need a reciept or is the warranty checked from the serial number?
No receipt needed.
and is it covered under Apple's 12 month warranty?
It very well may be covered, depending on what Apple finds.

Does XI has a DB ?

Similar Messages

Maybe you are looking for