Does XI support Socket communication?

Hi,
This question came from our customers and consultants.
I saw the definition of socket in Wikipedia that it is somehow based on TCP, UDP. So far as I know, XI does not "support" TCP/IP. Does this mean XI does not support Socket either? Or this could be covered in the adapters of XI?
If XI does not support this, do you have any experience of a solution to socket communication?
Thanks in advance!
best regards
Jing

Hi,
sorry for the late reply.
I understand you that PI does not quite meet healthcare specific requirements.
Regrading medical equipment with PI, I am not familiar with that part.
But I have good news regarding HL7 protocol with PI. In the meantime we (SAP) have a service solution of HL7 adapter for PI, that supports HL7 communications based on HL7 message format/protocol.
Details please see this blog from Vijendra: http://scn.sap.com/docs/DOC-3891
hope this helps you.
Regards
Jing

Similar Messages

Using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

That toolbar/ct plugin seems to cause problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

TS3230 i get a pop-up window saying the current version of Safari does not support the community toolbar. How do I get rid of this?

i get a pop-up window saying the current version of Safari does not support the community toolbar. How do I get rid of this?

You need to uninstall the Community / Conduit toolbar add-on.
Locate the files in bold print and move them to the Trash. The first five are in your root /Library
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/ScriptingAddtions (anything CTLoader realted)
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
The next one is in your Home folder.
~/Library/Application Support/Conduit
When you're done, try Safari.

I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."

When I log in I get this message I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."
Also, I can seem to down load my Adobe Flash, I did download what I thought was the correct down load for Safari, but I'm still getting this message "We're sorry but the Safari browser version you are currently using does not support the community toolbar." I was even going to purchase the Leopard for 29.99 to see would this solve my problem but I want to purchase another pc and sale this one, can you help me?
Thank you

See this link.
Also look at More Like This on the right side of these pages for realted threads on this topic (and on the pages those link to).

I keep getting an error message that says the safari browser version you are currently using does not support the community toolbar. how do I fix it?

Everytime I open my imac I get an error message that says: "We're sorry but the Safari browser version your are currently using does not support the community toolbar." I can't see where it affects anything else, but getting an error message on an imac, just doesn't seem right, ya know? How can I get rid of the message.

Apparently an add-on named Community Toolbar was installed at one time, and is causing the problem. To get rid of it, quit Safari, then throw away these files -
Macintosh HD/Library/Application Support/Conduit
Macintosh HD/Library/InputManagers/CTLoader
Macintosh HD/Library/Receipts/ctloader.pkg
Macintosh HD/Library/Receipts/<Toolbar name>.pkg
Macintosh HD/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
Macintosh HD/Users/<User name>/Library/Application Support/Conduit
Note - if you are using Lion, the Library folder in your home folder (user name folder) is hidden. To get into it, in Finder open the Go menu; with that menu open, press and hold the Option key. An item "Library" will be added to the list, and can then be selected. That will open the Library folder in your home folder.

Why when i click to open safari does it keep telling me the safari browser version i am using does not support the community toolbar ?

Why when I am clicking into safari does a message appear telling me that the Safari Browser version I am using does not support the community toolbar ???

You installed the Conduit spyware. To remove it, back up all data, then follow these instructions.
If the instructions don't work, proceed as follows.
Triple-click the line below to select it:
~/Library/Application Support/Conduit
Copy the selected text to the Clipboard (command-C). From the Finder menu bar, select
Go ▹ Go to Folder…
Paste into the box that opens (command-V), then press return. A Finder window should open with a folder named "Conduit" selected. If it does, delete the selected item.
Repeat with this line:
/Applications/Toolbars
Now you're deleting a folder named "Toolbars". You may be prompted for your login password. Next, copy this line:
/Library
Select Go to Folder… again and paste. Don't delete the Library folder. Delete only the following items inside it, if they exist.
Application Support/Conduit
InputManagers/CTLoader
LaunchAgents/com.conduit.loader.agent.plist
ScriptingAdditions/ct_scripting.osax
Close the Finder windows you opened. Log out and log back in.
I've seen a report that Conduit may be bundled with a scam "utility" called "MacKeeper." If you installed MacKeeper, you should remove it according to the developer's instructions. It's worthless and causes many problems reported on this site.

When I start my computer the safari icon jumps up and down and i get a note: 'Community Toolbar' I'm sorry, but Safari browser version you are currently using does not support the community toolbar. How do i get rid of this

when I start my computer the safari icon jumps up and down and i get a note: 'Community Toolbar' I'm sorry, but Safari browser version you are currently using does not support the community toolbar. How do i get rid of this?

Carolyn Samit has answered this question before. I did it with this info. Thank you Carolyn for your awesome help.

The Safari browser version you are currently using does not support the community toolbar.

the Safari browser version i am currently using does not support the community toolbar. And Iam using googel chrome now but not happy about this problem .
I would like to fixe it .
Many thanks

never mind.. I got rid of it already!

I get a message that says "Safari browserversionyou are currently using does not support the community toolbar

I get an annoying message everytime I open Safari. It reads - "Safari browser version you are currenty using does not support the commuinty toolbar" How do I get rid of this

victoria Hamlin wrote:
it didn't... but at least I know where to find the Library- any other ideas?
Instead of being installed as a standard plug-in, the Community Toolbar uses the system loader "launchd" to load the plugin on-demand whenever Safari is opened. You will need to remove three components that are installed, starting with the binary files.
The binary file is the actual toolbar application, and is located in the /Library/InputManagers/CTLoader/ folder. Removing the entire CTLoader folder will remove the application and other files that are installed along with the toolbar. If you just care to quickly stop the toolbar from loading, doing this will be enough to keep it from loading.
With the binary file removed, the toolbar will no longer launch; however, the system will still try to load it when Safari is opened because the system launcher instructions file is still installed. While having these instructions present will not cause a decrease in performance, removing them will prevent the system from outputting errors and warnings in the system log files.
Removing only this instructions file is another way to stop the toolbar from loading; however, it will require either the use of the following command in the Terminal (done before removing the file) or a restart of the system after removing the file to unload the instructions from the system loader and prevent the toolbar from launching.
sudo launchctl unload /Library/LaunchAgents/com.conduit.loader.agent.plist
The final components to the toolbar are some resources that it uses, which are relatively benign and will become unused "orphaned" files when the other components of the toolbar are removed. These files are all located in the /Macintosh HD/Library/Application Support/ folder in a directory called Conduit. Remove this directory and the toolbar in its entirety will be removed.

"Safari browser version you are currently using does not support the community toolbar."

I'm looking for a solution to this error message that pops up every time I restart the comp. I looked in Toolbar folder and it doesn't contain anything. Someone said to go to Library and go through a process but I don't know where it is. Can someone get me started and I'll try those steps. Or does someone have another solution to get rid of this error message?

That toolbar/ct plugin seems to cause problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

How do I get rid of the popup that says the safari version I am using does not support the community toolbar?

Please Help

You installed the Conduit spyware. To remove it, back up all data, then follow these instructions.
If the instructions don't work, proceed as follows.
Triple-click the line below on this page to select it:
~/Library/Application Support/Conduit
Copy the selected text to the Clipboard (command-C). From the Finder menu bar, select
Go ▹ Go to Folder…
Paste into the box that opens (command-V), then press return. A Finder window should open with a folder named "Conduit" selected. If it does, delete the selected item.
Repeat with this line:
/Applications/Toolbars
Now you're deleting a folder named "Toolbars". You may be prompted for your login password. Next, copy this line:
/Library
Select Go to Folder… again and paste. Don't delete the Library folder. Delete only the following items inside it, if they exist.
Application Support/Conduit
InputManagers/CTLoader
LaunchAgents/com.conduit.loader.agent.plist
ScriptingAdditions/ct_scripting.osax
Close the Finder windows you opened. Log out and log back in.
I've seen a report that Conduit may be bundled with a scam "utility" called "MacKeeper." If you installed MacKeeper, you should remove it according to the developer's instructions. It's worthless and causes many problems reported on this site.

I am unable to connect to the internet, there is a pop-up that says "We're sorry, but the Safari browse version you are currently using dos no support the community toolbar". My computer does say that it is connected to the internet until I open Safari.

I am unable to connect to the interent. At the top of the screen my computer says that I am connected. When I open up Safari there is a pop up that say "Community Toolbar We're sorry, but the Safari browser version you are currently using does not support the community toolbar" and when the Safari page opens up it says "You are not connected to the Internet. Safari can't open the page .... because your computer isn't connected to the Internet." I have tried Network Diagnostics and tried to reset Sfari, empty Cache as well as deleted all of my interent history. I am unable to use Time Machine because I never set it up. If someone knows how to help I would very much appreciate it!!

Some instructions for removing Community Toolbar are available in this thread: https://discussions.apple.com/message/15868085#15868085

Everytime I open Safari I get a message that says the "Safari version you are using doesn't support the Community Toolbar." Does anyone know what this means?

Everytime I open Safari I get a message that says "we're sorry but the Safari browser version you are currently using does not support the Community Toolbar." Does anyone know what this means?

Have a read at this thread https://discussions.apple.com/message/15620421#15620421 with similar problem and a solution.
Stefan

HT5271 I get error message that my version of Safari does not support community tool bar?

Everytime I open Safari I get an error message that saids This version of Safari does not support the community tool bar. How can I fix this situation?

That toolbar/ct plugin seems to cause problems for all who install it!
If you are running Tiger or Leopard:
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
If you are running Lion:
From the Finder Menu bar, select Go ▹ Go to Folder, and in the box that opens write:
~/Library/Application Support/Conduit
Delete the second item if it is there.
Now select Go to Folder again and enter /Library
From the folder that opens, delete the following items if they are there (you may need your login password):
Application Support/Conduit
InputManagers/CTLoader
LaunchAgents/com.conduit.loader.agent.plist
ScriptingAdditions/ct_scripting.osax
then close the folder. Now select Go to Folder again and write: /Applications/Toolbars
Delete that item and close the Finder windows you opened. Log out then log back in, and you should be rid of it.
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

Emulator support serial communication?

Hi all
I'm trying to implement some serial communication using mobile to write to usb. But I'm surprised that is it possible to do with using emulator?
Here the problem is
String ports = System.getProperty("microedition.commports");this thing always return null when run it on my mobile. I used k510i to test this and finally got to know that jp6 (k510i) does not support serial communication.
But when this run on emulator it gives output string as COM1, COM2.
So my question is can we use emulator to do this, hence emulator does not have usb cable and does any one has an idea to convert emulator to make enable this?
If can please tell me how?

Sorry to say you that you can not touch your PC hardware from the emulator. Because the emulator runs KVM
as its runtime over the JVM. Thus if you want to touch the hardware of your PC then you have to request your
JVM from the KVM to communicate with the hardware and return you the response. Which is not at all possible.
But if you still want to use the COM1 and COM2 then run two different instances of the emulator and start a serial
communication between two emulators like a chat application.
Shan!!!

Does XI support Socket communication?

Similar Messages

Maybe you are looking for