Does your 2011 MBP i5 13" get hot?

I just got my i5 13" mbp 3 weeks ago.  During light browsing such as google, facebook, or researching little homework assignments, I've noticed that my mbp gets hot on the bottom.  I sometimes use it on my lap, but mostly on a desk.  I've researched this question many times and many people say it does get hot, but the question is how hot?  and what should the temperature be during light, normal, or extrenuous usage?  thanks for any input and any suggestions on how to fix the problems would be great.  Also, my girl's late 2009 13" c2d MBP doesnt get as hot as mine.
-backlit keyboard turned to bellow medium, screen brightness turned to middle setting. running on batteries.

My 15" MBP 15 Core i7 has the same problem. Spoke with AppleCare and tried resetting to power management unit and the PRAM; no improvement. Also tried reinstalling the 10.6.7 'early 2011 macbook pro' update - still no change.
Each attempt at waking from sleep produces a series of the same error messages in Console. Here's the full series:
kernel WaitForStamp: Overflowed waiting for stamp 0x70ed on Main ring: called from
kernel timestamp = 0x70eb
kernel ** Debug info for apparent hang in Main graphics engine **
kernel ring head = 0x00200eb4, wrap count = 0x 1
kernel ring tail = 0x000010e0 ring control = 0x00003801 enabled, auto report disabled, waiting, semaphore not waiting, length = 0x004 4KB pages
kernel timestamps = 0x70eb
kernel Semaphore register values:
kernel VRSYNC: (0x12044) = 0x70eb
kernel BRSYNC: (0x22040) = 0x0
kernel RVSYNC: (0x 2040) = 0x0
kernel BVSYNC: (0x22044) = 0x0
kernel RBSYNC: (0x 2044) = 0x0
kernel VBSYNC: (0x12040) = 0x0
kernel Looks like Main ring is stuck waiting on an event
kernel After attempt to clear wait condition = 0x00003001 no longer waiting
kernel kIPEHR: 0x2000000
kernel kINSTDONE: 0x882fbb
kernel kINSTDONE_1: 0x2308a3f
Re-sleeping and re-waking the machine occasionally lets the screen come back on.
The machine itself is running; I can ssh into it from another computer.
I tried disabling hibernation, too (http://danwarne.com/how-to-turn-off-slow-sleep-hibernate-mode-on-a-macbook-pro/), with no change.
Anyone with new information on the issue? Going to take it to the Apple Store, I suppose, once I have time...

Similar Messages

  • Why is the WIFI so slow on my 2011 MBP? its getting frustrating

    why is the WIFI so slow on my 2011 MBP? its getting frustrating

    Hi Jeff,
    Can you elaborate on your issue a bit further. What is "slow" in your approximation? Tell us about the environment you're in, what type of router, band and channel. How many other wireless routers does your machine pick up? Is it slow other places with wireless or just this current location? New issue, ongoing?

  • Macbookpro i7 2011 restarts when it gets hot after playing games?

    Everytime i try play Starcraft 2, my macbook will display a grey restart message after a few games and i end up getting an error after i restart my laptop. i just got my laptop 2 weeks ago and is finding this incredibly anoyying. does it always restart everytime the laptop gets too hot??

    You bought a new machine that has a new operating system 10.7 and the third party program is tailored for the previous OS X version of 10.6
    Try to find out if there is a update for 10.7 for your third party programs.
    Right now all you can do is apply Software Update under the Apple menu for OS X and wait for updates, contact the developer when they expect a update.
    If your experiencing shutdowns with other high CPU/GPU programs, it could be something wrong with the machine itself.
    Perform a HardWare Test you may have a dead sensor or fan.
    Install iStat and monitor your machine for unusal behaivor, post your results here for comparison with others.
    Hail Mary list
    1: SMC reset
    https://support.apple.com/kb/HT3964
    2: PRAM reset
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
    3: HardWare Test
    https://support.apple.com/kb/HT1509
    4: Re-apply Firmware via CD (only works if it failed to install)
    A failed firmware install the computer boots to a grey screen with a progress bar that stops
    https://support.apple.com/kb/HT2213
    Consult this page here to get the correct firmware for your machine
    https://support.apple.com/kb/HT1237
    5: If you boot to a grey screen, flashing folder, spinning gear etc
    (flashing folder fix: try hold option while booting, select your boot drive, then set as Startup in System Preferences)
    https://support.apple.com/kb/TS2570
    6: If you have "you need to restart"  kernel panic
    https://support.apple.com/kb/TS3742
    Boot the computer holding the Shift Key down for "Safe mode" this disables third party kernel extension files (.kext) that load upon boot. Look in your system/library/extensions folder for names of kexts files that correspond to any of your third party software and/or simply check for updates for all your software. If none, consult the developer which kext files to remove out of the folder.
    If you have perhaps bad RAM, test using Rember extended overnight.
    Clean your OSX install disk's bottom with a bit of rubbing alcohol on a very soft cloth and polish.
    If you need another OS X Snow Leopard grey disk without possible imperfections, call Apple with your Serial number (under the Apple Menu>About this Mac> more info)
    Firewire Target Disk Mode can get your files off the machine if it works and you have another Mac.
    https://support.apple.com/kb/ht1661
    For more trouble shooting and backup, restore and performance read here, including correctly formatting a external drive, and making a data rescue drive to boot the computer from and grab your files off the machine, reinstalling OS X in various ways etc. Pondini's TimeMachine page etc.
    https://discussions.apple.com/message/16276201#16276201

  • 15in early 2011 MBP, Can I get the screen replaced w Hi-res Antiglare?

    I have a 15 Macbook pro early 2011.  I was wondering if apple could replace the current screen with the hi-res antiglare screen.

    It'll cost the same amount of money as your computer did at first. If you just got your MBP (and you bought it directly from Apple via a store or online) go exchange it.

  • 17" MBP gets hot on left side

    I have owned my mid 2009 17" MBP since 2009 when it was bought brand new. I am in the military and it has traveled with me to many countries and I have used it in my lap, on my chest and on desks. I know what is normal and what is not normal. I can tell you that recently the left side of my MBP has been getting hot around the escape key on the upper left. I know that is where it usually gets hot when doing intense computing but it is now getting hot when doing menial tasks like having Safari open or watching a video on Facebook or Youtube. I really don't multi task with it so I know there aren't any programs running in the background either.
    I ran the apple hardware test and it came back with good results - nothing found. I wonder if a sensor or fan might be acting up. I use Hardware monitor and when I look at the temps most of them are in the 80s (F) except for CPU A temperature diode. It will run around 130. When I open up another window or another task the average temps can get to 100 and the CPU A gets up to 180.
    I know this hasn't always been happening so I am wondering if anyone has any ideas. I plan on giving the laptop to my son for college and video editing and I want to fix this so he doesn't have to deal with the heat unless he is going computing crazy. I have already looked at some laptop cooling pads to help but I still want to fix this if possible.

    1. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the appropriate method.
    2. Runawy applications can shorten battery runtime,affect performances and
        increase heat and fan activity
        Activity monitor
    http://support.apple.com/kb/TS1473

  • Anyone else have Sonnet Expresscard34 working with 2011 MBP?  Does Thunderbolt cable get hot?

    Anyone else have Sonnet Expresscard34 working with 2011 MBP?
    Does Thunderbolt cable get hot?

    PaulDouglas wrote:
    PS - Apple, are you listening? 
    No
    No one here works for Apple nor does Apple visit this message board.  We are all end users like yourself helping each other out.  Post your complaint on the Product Feedback website.

  • Does your iPhone 5s get hot playing GTA San Andreas  please answer!!!

    Well my iPhone 5s gets hot  playing grand theft auto San Andreas. I was wondering if anyone else experiences this on their own iPhone 5s. If you've experienced this please tell me I would really like to know How  many other people are having this problem. It's hot in about two minutes of gameplay and it is Not or hot enough to burn my hand just uncomfortably warm. Thanks and please tell me If your iphone 5,5c,5s has this would really appreciate this:)

    Yes I'm aware but does ANYONE notice this on there phones???

  • Does your X1900XT get very hot?

    And how hot does (can) it get?
    While trying it in a Windows computer I had its case open and decided to feel the back of the ATI board. It was very hot so I am not sure if that is normal for X1900XT or not?

    Thank you both for your replies. Yes, there is hot
    air coming out but any higher-end card would generate
    that, no? I'm just trying to compare to my other
    cards I had in a PC since I do not recall them being
    this hot.
    Then again this is ATI, I never held them in high
    regards when it comes to making neither hardware or
    software. Too bad the other choice (NV Quadro FX
    4500) is way too expensive.
    The Nvidia would be cooler, 110 watts vs. 132 watts. If hot air is coming out, it means the fan is working, and the vents are not obstructed, so it should be OK.

  • TS1713 how hot does your charger get when charging

       Wondering how hot does the magsafe 2 power adaptor get when charging

    I assume you mean the charging BLOCK
    the answer depends on ambient temp of course, however typically warm to moderately warm.

  • Lately, I've been getting a blue screen in the midst of working and have to do a cold reboot to end it. Seems to happen when I'm closing windows or quitting applications. Not always, but sporadically. What causes this? I'm using 10.6.8 on early 2011 MBP.

    Lately, I've been getting a blue screen in the midst of working and have to do a cold reboot to end it. Seems to happen when I'm closing windows or quitting applications. Not always, but sporadically. What causes this? I'm using 10.6.8 on early 2011 MBP. Thanks for any help/advice!

    You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
    Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
    http://roaringapps.com/apps:table
    Far as your Safari problem do these things until it's resolved:
    1: Software Update fully under the Apple menu.
    2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
    https://www.mozilla.org/en-US/plugincheck/
    Flash install instructions/problem resolution here if you need it.
    How to install Flash, fix problems
    3: Install Safari again from Apple's web site
    https://www.apple.com/safari/
    4: Run through this list of fixes, stopping with #16 and report back before doing #17
    Step by Step to fix your Mac

  • My Early 2011 MBP Has Just Started Running Extremely Hot.

    Hi there. As in the title I have an early 2011 MBP, 15 inch, £1550 model. I've been playing Football Manager a lot recently, and sure it runs at around 50-60 degrees but that's fine. However now i'm just on FireFox, been on for around 30 minutes, and my battery is being sapped as if I were playing a game and i'm at 60 degrees average with SMC at 5000 RPM as well as a notebook cooler which has a fan built in. Usually I run at around 30 on the internet, 40 is fine though.
    Any reasons why it is doing this? Nothing is running at over 5% in the Activity Monitor. FireFox seems to be spiking though, at like 30%. It's really annoying because I want to play Football Manager but when I put it on, it's at like 70/80 degrees. Super, super hot considering I have lots of cooling stuff. Any clues anybody, please!?

    "Nothing is running at over 5% in the Activity Monitor. FireFox seems to be spiking though, at like 30%."
    Do you have "All Processes" selected in Activity Monitor? If not, select it in the drop-down menu and then see whether there's something using a large percentage of your CPU.

  • Late 2011 MBP i7 gets slow with and after Aperture

    My first post, please pardon my ignorance. I have read similar threads but I believe my situation is a bit different.
    Anyway, my late 2011 MBP i7 4GB ram, running on SL gets very slow after I open/browse/edit in Aperture. The system does page out to 1.3 gb. When using Safary and email, it becomes very painfull even after I close out the Aperture. The whole system becomes laggy and menus become delayed. The only solution is to reboot and my mac is back like new until I open the Aperture again. Every program is up to date and only about 160gb out of 500gb HDD being used.
    Heres what I've done so far:
    1. long hardware test checked ok
    2. NVRAM reset
    3. downloaded Kasperski and found no viruses
    4. rebuild/repair aperture database
    5. ordered 8gb crucial ram, should be in in a few days
    Is it due to not having enough RAM? My previous 2006 MBP Core 2 Due was almost as fast running on Lion and 4GB ram. I would expect a significant speed increase on my 4 core i7, but unfortunately it's not the case.

    Paging out to 1.3 gig effectively means that a lot of stuff is sitting in virtual memory on your hard disk.  The i7 is great for improving the speed of whatever is in memory, but anything that is paged out is limited to the performance of the HDD and SATA bus.
    The cheapest and most effective first step is to max out your RAM. It's a modest investment that will benefit you immensely. The second step is to replace mechanical disks with SSDs. Currently, this is a pricy proposition, but the performance improvement can be nearly 100% over a mechanical drive system.
    At the end of the day, it's about how much money you want to spend to go as fast as you can afford.

  • If I get one of the Toshiba SSDs and put it in my 2011 MBP, will it auto enable trim support?

    If I get one of the Toshiba SSDs and put it in my 2011 MBP, will it auto enable trim support?

    It is outrageous that Appe deliberately does not enable TRIM support native to the OS to non Apple SSD drives automatically. Even worse is to cancel it after an update of the OS.
    It is forcing anyone who does not add up to your greedy aftersales target to eventually experience trouble with their non Apple drives.
    It is monopoly, isn't it?
    It does also sounds petty, very disgusting from such a reputable company.
    I love Apple but they do not need to go down such length to whatever are their aims.
    Very disappointed to find out that the TRIM support I enabled prior to the update 10.9.3 is now disable.
    Simply unbelievable!

  • Iphone getting hot got replacement and this one is doing the same thing

    After having it since November 2011 my iphone 3GS started getting hot to the touch last week and would not come on in any way.   I went in and it was under warranty so they gave me a replacement and now this one is doing the same thing.  UGH! Why?

    Yahoo services have been having problems today, so I don't doubt that mail is one of them. They are having trouble updating the Weather app as well.
    What is wrong with your voicemail. Remember that voicemail is a carrier function. The only thing Apple has to do with it is how it is retrieved. Can you describe your problem a little more clearly than "totally screwed up"?

  • My early 2011 MBP 13" does not recognize my Sandisk 16GB 45MB/s Extreme Pro SDHC card.  I went to the Genius Bar and we tried it in all the MacBook Pro's in the Apple Store and NONE could recognize the card.  However, iMacs did.  Any suggestions?

    My early 2011 MBP 13" does not recognize my Sandisk 16GB 45MB/s Extreme Pro SDHC card.  I went to the Genius Bar and we tried it in all the MacBook Pro's in the Apple Store and NONE could recognize the card.  However, iMacs did.  Any suggestions?  Genius behind the Bar suggested wait for LION OS X release...

    You really don't need to post multiple times, you will get attention eventually.
    Find the reply here:
    MacBook Pro 13 (MBP 8,1 random restarts)

Maybe you are looking for

  • Attributes of request do not match buffer attributes

    Hi all, I created a connector of the type 'SAP File Search' in the Enterprise Search Cockpit. But the connector cannot be setted to an active status and when i'm executing the consistency check i get the error message "Attributes of request xx, conne

  • Scale in Final Cut Pro

    Hi, just a question about the scale function in the motion tab. Let's say I want to simulate a slow zoom-in on my footage by scaling up from 100 to 110 over the course of a few seconds. The footage is 720p. Obviously, this isn't ideal because I'll lo

  • SCCM 2012 R2 ADR issue with proxy authentication

    Hi, We're migrating SCCM 2007 to SCCM 2012 R2. In SCCM 2007, the proxy server is configured with user authentication, and this works. In SCCM 2012 R2, the Software Update Point is installed locally and connected with a local WSUS 4.0 (Server 2012) We

  • Smartforms to MSWord

    Hi All, I need to download smartforms to MSWord.Is there any Function modulr for that..... I think 'CONVERT_OTF' will not work in this case

  • Wb_rt_api_exec over a database link

    When I call wb_rt_api_exec over a database link I receive: ORA-20001: Task not found - Please check the Task Type, Name and Location are correct. ORA-06512: at "OWB_10_2_0_1_31.WB_RT_API_EXEC", line 704. When I run the command on the other database i