Does Zagg Invisible Shield help against glare?

Wondering if it's a good anti-glare "shield." Thanks!

The Zagg film has a slight "orange peel" finish that does break up the reflections and more importantly, it really helps reduce finger print smudges. I have used their products on my iPhone and MacBook Pro cases but never on the display. I applied it last night to my iPad and really spent a lot of time smoothing out the film to clear out the air bubbles. This morning after drying, it was crystal clear and I'm very pleased with the appearance.
So bottom line:
1) Install carefully to get in the correct position and avoid bubbles
2) Expect some nominal reduction in glare and reflections
3) Expect a tremendous reduction in finger print smudges!

Similar Messages

Zagg invisible shield fix antenna issue?

Does the Zagg invisible shield actually fix the iPhone 4 antenna issue?

My issue is the same with or without any bumper or cover... I believe and have had it somewhat confirmed with at&t that they are having issues with the towers in my area.. and have since March.. If they are upgrading everything to 4G it makes sense to me that until it is all transitioned over and all the bugs are worked out it would give people a less then perfect signal. I have always had full 5 bars and never any complaints and have been with this company since 1993 and have seen them thru approximately 4 or 5 merges and never had anything bad to say until around March. I still was using my 3GS before the ios4 upgrade back then. So I am not convinced it is the new iphone4 antenna problem that everyone thinks it is... I have the same signal strength on my iphone 4 whether I have a cover on or not and if I hold it all different ways the signal does not change to any better or worse.. I am constantly at 1 or 2 bars.. 3 or 4 maybe once a week for a minute or two and get excited to see them. That is sad isn't it??? lol

The Zagg Invisible Shield~Recommended or Not?

Just curious how many people use the invisible shield and if you would recommend it or not for the Iphone 4? I have never used one on my 3G. Only used silicone cases for protection. Just wondering if others liked it an if it's hard to install having to use the spray etc? I fear getting this liquid solution in the speaker etc. Thanks in advance!

I also recommend it for the back only, the texture of the material takes away from the whole touch screen experience. ZAGG makes some awesome skins for the back of the iPhone and you can even load your own pic up to their website and create your own custom skin. I just got my skin last week and the picture quality is awesome! If you sign up for Zagg's iPad giveaway you'll also get a 50% off coupon you can use to get the skin for around $10 instead of over $20.
http://www.zagg.com/community/contest.php

Does The Invisible Shield Marr Out Existing Scratches On iPod?

When you put an invisible shield on your ipod, do you no longer notice the scratches that exist on your ipod?

i'm also wondering if the crystal shield by istyle does the same thing.

Palm Touchstone work with Zagg Invisible shield

I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

The zagg shield is a thin enough layer that it will not affect the charging at all.

For all the folks who pre-order the ZAGG invisible shield for the iPhone 3G

My shield did not fit properly, so I emailed ZAGG. Here is what I got back:
"When we created the design for the Apple iPhone 3G we had very limited access to the actual device. We were able to complete a design for it and get this shipped for our customers so they would have protection for their Apple iPhone 3G as soon as possible. After having more time with the Apple iPhone 3G we have improved our design by making a slight change. This change makes the installation process easier and provides more protection, including covering both bevels fully.
If you would like a replacement invisibleSHIELD for your Apple iPhone 3G for the new design, we would be happy to send you a free warranty replacement.
Per the Lifetime Replacement Guarantee, your replacement invisibleSHIELD is free! The minimal reshipping and handling charge is $3.95 for an estimated 1 - 2 week delivery service for domestic and European orders (three weeks internationally) and includes free application solution and squeegee. If you would like to purchase a faster shipping method, one of our associates would be happy to provide further details.
For the quickest possible service, please call us at 801-263-0699 or toll free at 888-940-9663 and we can take your credit card information over the phone. Our office hours are Monday through Friday, 9 AM to 5 PM, Mountain Time. If it is more convenient, you can provide us with a telephone number where we can reach you, and a customer service representative will contact you. If you would like to use PayPal, please contact us and we will be happy to provide detailed information on that process. Also, if you do not have a PayPal account and are not easily reached via phone, we can email you a money request where you would be able to enter in your credit card information to send us a payment.
After receiving your replacement, we will request that you send your original invisibleSHIELD back to us with your order # or registration number. This will ensure that your lifetime replacement guarantee remains valid"
This is really bad customer service. Because they had to guess on the iPhone 3G measurements, I need to pay out of pocket to get a replacement (shipping cost)??

EVERYONE... I pre-ordered also and got the original one on but it didn't look great so I called and got the new redesigned one sent to me.
IT IS TERRIBLE. The redesigned one is worse than the first one. The front screen wraps around the edges of the phone. If you haven't looked there is a seam that runs around the front glass piece. This causes major air bubbles and making it impossible to put the redesigned on on.
Also the back has its problems too.
Best solutions.
1. return it all and get your money back.
2. get another one reshipped but make sure it is the original.
I got the original one shipped to me again and got it on correctly but after a few days it keeps fraying up. Whats next......

ZAGG Invisible Shield

http://www.zagg.com/invisibleshield/apple-iphone-4-cases-screen-protectors-covers-skins-shields.php
Is anyone using this, or plan on using this, for their new iphone? How hard is this to put on?

I have used this for my Droid X, Droid, and Fascinate. However, I would not go with it. It has an orange peel effect. I would check out ghost armor, that is a good bet. Like it a lot, doesn't scratch or leave many fingerprints, has a lifetime warranty, and makes it look like there is nothing on your phone. No orange peel effect like zagg. And, it's only about $15 bucks or so.
The site is ghostarmor.com I think. I got mine at a mall kiosk.
ing_cayman wrote:
http://www.zagg.com/invisibleshield/apple-iphone-4-cases-screen-protectors-covers-skins-shields.php
Is anyone using this, or plan on using this, for their new iphone? How hard is this to put on?

Does firefoxes master password help against cyber attacks or is it just good for people trying to get in youre own computer?

Just want to know if master password guards against online attacks

4th agent
Stephen: I am sorry,it seems to be a technical issue. Since we are from Customer Service team, Unfortunately, we don't have resource to resolve this issue.
5th agent
K: Can you fix it or not?
Ali: For this issue I will give the link.
Ali: Please follow the link.
K: A link that will fix it?
Ali: It will help you to activate creative cloud.
Ali: Please click here for the link.
K: Hmmm...sounds interesting...no agent has said that yet
*** I really don't believe he has a magical link that will fix my issue ***
Ali: You can go ahead and activate the product.
Ali: Is there anything else I can help you with?
*** He didn't even wait to see if the link actually works, and he's already trying to end the chat ***
*** His magical link didn't fix the issue. ***
Another day, another set of agents to chat in with, hopefully I'll get one that can resolve the issue.

Invisible Shield

Anyone have the Zagg invisible shield for the 3G Iphone

I've been using the full-body InvisibleShield for over a year.
The front has minor, almost unseen, scratches, cause unknown; the back has an obvious scratch from dropping it. It hit a box while falling. I will claim the lifetime warranty later.
No issues whatsoever with peeling. I applied it carefully and allowed it to set properly.
The back cover does provide better gripping. The original iphone was very slippery otherwise.
I am certain that the shield reduces touch sensitivity very slightly. However, there is greater sensitivity reduction since I began using a stylus three weeks ago. Nonetheless, this does not deter me from having screen protection. I can only imagine how many scratches I may have without the shield.
No regrets buying InvisibleShield despite my scratches versus their scratch-proof claim. I rate the product as very good. Note: if anyone ever needs to open the 1st gen phone's back cover, you must slice the shield. This is because there is a top and bottom (battery) cover. Fortunately, I have not done this though, but I know some people want a resale 1st gen phone, not 3G.
BTW, I use InvisibleShield on my digital camera screen and handheld GPS/PDA also. No scratches, no peeling. No sensitivity issues with my GPS and stylus. On the camera, slight brightness challenge. The shield acts like a glare filter.
Hope this helps your decision.

How to avoid water damage when installing invisible shield

Just wondering what you have to do to avoid water damage when installing Zagg invisible shield? What precautions should I take so that I do not damage the iPhone when installing Zagg Invisible shield?
Thanks and I look forward to your replies.
...B

Hi BGmail,
I would stay away from invisible shield by zagg or similar products. I tried it, waste of £15, could have got myself a dock stand for my phone for that ****!! The problem with IS(invisible shield) is that the screen protector has a rubber feel which makes it annoying when swiping your finger on it + it's not scratch proof at all!! Mine scratched 2 days after the installation so badly that I had to remove it. The back it's hard to apply, does not cover everything you'd like to, also a dust trap that could get between tha film and the phone causing it to scratch, some people reporting the film going yellow after a while(on white iPhones).
What I think of IS: A poor american product heavily/aggressive advertised!! Mine is off, using a hard clear plastic shell and a good screen protector, might look bulky but it's safe, only using the shell while at work, the iPhone is pretty tough, don't forget.
Your choice... Good luck !!

Need help re invisible shield....quick it's drying!

Hi,
I need help re the invisible shield. I installed the front and back but here is the hitch-the front "sides" don't stay down. Did anyone have trouble with this? I didn't have the problem with the back "sides" I guess because they are so much wider.
Its drying as we speak.
Help!
Thanks!

i never applied pressure to anything, you must be doing something wrong. I drenched the entire shield: front, back , circle, and smaller circle in water with soap, then applied it. used a credit card to get out the air bubbles and then let it sit for 10-15 minutes. Dried on its own and have not had a problem. You should try reading the instructions that come in the envelope before you install it, using water alone does not help.

Does a shop in the UK fit invisible shields?

I just got the zagg full body shield and dont wanna fit it myself when the iphoen comes is there a shop that does it for a small fee? in the UK

I would not worry about the water damage. Even too much spray won't hurt it. They have included the squeegee so that you get no air-bubbles. Here is some advice, have a cleaning cloth next to you, as you gently use the squeegee to remove the air bubbless and some extra water, run it along the side and as some water comes out quickly use the cleaning cloth do wipe out the water. As you get near the home button as you squeeze out, put the cloth over the home button so that as you squeeze out the water will to to the cloth. Same for the ear speaker.
Just don't spray the solution onto the device itself.
I have used bodyguardz for my device before (same type as invisible shield), and I have never damaged my device at all.

Invisible Shield + Colour Screen- Does Anyone Have a Blurred Picture

I was looking to buy an invisible shield for my ipod video and noticed that in my local online store there was a note that said:
"due to a problem with the included screen protector blurring the the screen on colour iPod's and iPod Photo's we do not recommend purchasing the Podshield for use with any iPod's with a colour screen"
Does anyone have this problem or a way to get passed it? The Shield sounds great so I would really like to know any way I can get passed this.
Thanx
Ipod Video (30gb)

I bought an invisible shield by direct mail from the manufacturer in the USA and it arrived within 4-5 days. $25 sounds a lot for 2 bits of plastic but from what I've heard about how easy it is for Ipod to scratch up (I wouldn't know myself!), it is worth every penny. As long as you take your time to install it and follow the instructions properly, it provides superb protection and you can bearly notice it once its on. It is a FANTASTIC product and I would recommend it to anyone. In fact, it's the finish that Apple should have had on the Ipod from the start !
Video Ipod White 60gb

Invisible Shield for iPod touch: Don't Get!

Worst product ever.
Do not get. If you are wondering how to protect your iPod the invisible shield is NOT the answer. I have used many of ShieldZone / Zaggs products before without problem but the Invisible shield for the iPod touch is terrible.
For whatever reason the back shield will nor adhere the he curvature of the Touch and the shield for the front of the touch was cut too large and will never fully adhere to the slight bevel around the perimeter of the screen.
Be advised AVOID THIS PRODUCT!
Message was edited by: Vermifuge

I just finished the application process for my full body Invisible Shield. Overall, it went very well but there are a couple of bubbles and/or imperfections on the front shield that would compel me to ask the company for a replacement if they do not work themselves out over the next 2-3 days like the instructions say. So I'll reserve judgment for now, but here are my overall impressions:
1) The material is fantastic. It doesn't show fingerprints when you touch it, it's very transparent, and it feels very nice to the touch. It does stink a little if you put your nose up to it, but I don't plan on sniffy my iPod too often. LOL.
2) The back shield installation actually went better than the front. The back shield is virtually flawless and you can't even tell it's on. I didn't have any trouble getting the curved parts to adhere at all. However, I was slightly off in my centering and the top edge covered my Hold button just a tiny bit. Rather than completely remove and reapply, I took a small pair of scissors and just cut a tiny slit right where the shield was overlapping my Hold button a bit. Voila! The back shield is awesome and will seemingly protect that chrome for a long time. The shield material actually has a little more friction to the touch, which might help you prevent dropping the iPod.
3) The front shield (which I applied first) didn't go quite so well (perhaps because it was my first time). When I first put it on, I was off a bit and had to pull it back off. When I reapplied, I got the centering pretty good but now there are several bubbles and a couple of lines going across the material that I can't seem to work out with the included rubber thingamabob. If they don't work themselves out, I might try removing the shield again and trying once more. Otherwise, I'm going to have to ask for a replacement because it is distracting.
More importantly, the front shield doesn't interfere with the "touch screen" at all and you can't really tell that it's on (except for the aforementioned bubbles/lines). I don't know how long it will last before you need a new one, but I would definitely recommend the product but just be very careful the first time you apply it.
I will report back in a day or two and let you guys know if the imperfections works themselves out.

Invisible shield and iphone dock

Hi. Can someone pls help me? I was thinking of buying an invisible shield for my new iphone 3G to keep it looking great. However, I am a bit worried that if I fit a shield to it, it will not fit in the dock. Does anybody have an invisible shield on their iphone and can you tell me if it can still fit in the dock?

I put the full body invisible shield on mine. I did drop it from the back of a parked car onto the street. I was sure that there would be damage, but there is not even a dent to the shield.
I really recommend it, but take time with the installation if you are worried about perfection. The bubbles NEVER seem to work their way out if you do not get them out during installation. It is better to remove it immediately and reapply if there are too many bubbles.
I do, however, highly recommend it, especially compared to some other screen protectors which seem to come off over time, and are hard to apply correctly. The invisible shield can be slid around while still wet, which is great if you have huge, fumbling, sausage fingers like me.

Does Zagg Invisible Shield help against glare?

Similar Messages

Maybe you are looking for