Doesn't gcc come by default with Solaris 10?

I am newly exposed to Solaris 10 in connection to my office assignment. To my utter surprise, I couldn't find any gcc installed. Presently I have got around the situation by installing a pre-compiled binary from [http://sunfreeware.com] The system I am working on is disconnected from Internet due to security reason. Is there any workaround to install the official version from Solaris repository?
Edited by: 974622 on Dec 3, 2012 7:56 PM

Yes, it comes by default, ur env variable might have not set.
look around.

Similar Messages

In Table Maintaince G/L Text should come by default with G/L Acc.--Ple

Hi Guruu2019s
I created Ztable with 3 fields G/L Acc, G/L Acc text and another Zfield.
I created a TABLE MAINTAINCE for this. Here we need, after entering the G/L A/C in table maintaince-- G/L Text should come by default. Please suggest a way do these.

Hi,
You need to write the code in the EVENTS. these are avilable in the table maintanence. you can use event 05(create), here give the Perform name and click on the code button there you can write the logic to bring the short text and move that text to your Ztable field.
look at the link to create the events --> /people/sudheer.junnuthula2/blog/2007/07/31/events-in-table-maintenance-generator
Thanks
Sudheer

Please advice -PS /PP Module comes by default with ECC6 or addon ?

Hi Gurus,
Could you please let me know whether PS /PP modules comes along with ECC6 or seperate addon installation to ECC6.Like EHP
Where can i find the technical documentation.
Thanks in advance....
Moderator message: not directly related to ABAP development, please search for available information/documentation.
Edited by: Thomas Zloch on Oct 7, 2011 10:58 AM

Hi,
By defaults all modules will be there.You need to configure that in system according to your business requirement .There is no need of any special installation for ps.
Regards,
Madhu.

Oracle 12c, what comes as default with Enterprise License

Hi All
I would like to know if One CDB and One PDB (Plugable Database) architecture is covered under default license for Enterprise Edition OR do we need a separate License if we want to use this feature?
Thanks

I would like to know if One CDB and One PDB (Plugable Database) architecture is covered under default license for Enterprise Edition OR do we need a separate License if we want to use this feature?
As already stated only Oracle can give an up-to-date, definitive answer.
This Oracle web-site/article says YES
https://blogs.oracle.com/Multitenant/entry/single_tenant_configuration
So, in summary, with Oracle Database 12c you have three choices:
Non-CDB (the old architecture).
Multitenant architecture in single tenant configuration (one PDB per CDB). No license required.
Multitenant architecture with multiple PDBs per CDB. Requires licensed option but of course you can manage many as one and get all the other benefits.
See item #2 above?

I had facetime and I have mountain lion, but I can't find face time on my computer. Doesn't it come with mountain lion?

I had facetime and I have mountain lion. However, after an update facetime disappeared. Doesn't it come with mountain lion? What do I need to do to find facetime? Do I need to repurchase it?

You need to find the Domain.sites2 file that contains your website data and double click it to launch the site iniWeb.
The default location of the file is shown here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
Since you are using iWeb '08, you need to publish the site from iWeb to a local folder and upload it using an FTP application...
http://www.iwebformusicians.com/Search-Engine-Optimization/Upload.html
to your new hosting service....
http://www.iwebformusicians.com/iWeb/Website-Hosting.html

New Mac Book w/Lion. Can't find Pages or Keynote. Won't run with the old 09. Doesn't it come pre installed?

Old Mac Book hard drive failure. New Mac Book Pro w/Lion pre installed. Restored from back up but Pages and Kenote has error/ problem with software. I'm assuming it's out of date. Doesn't Lion come w/these programs or am I missing something?

No, Mountain Lion does not come with iWork programs. Check your account in the App Store and see if you can download them. If not you'll need to purchase them.

On my ipod touch i bought some music but when i go to download it on my pc it just comes up as downloaded and doesn't let me do anything with it

On my ipod touch i bought some music but when i go to download it on my pc it just comes up as downloaded and doesn't let me do anything with it.As in it w'ont let me download it or anything like that.

Make sure you have signed-in your iTunes and authorized the computer.
Go to iTunes menu EDIT > PREFERENCES > DEVICES tab and check the Box "Prevent iPods, iPhones and iPads from syncing automatically then OK.
As long as you don't sync your devices, iTunes will not wipe out music from your iPod. Now connect your iPod and do the Purchase transfer only.

How come my iPad with iCloud doesn't sync with my iPhone 4 that has same apple id and both ios5?

How come my iPad with iCloud doesn't sync with my iPhone 4 that has same apple id and both ios5?

Not sure if you just have an issue with your setup or something else.
I had an issue where my numbers and pages documents were not syncing on my ipad, but were on my iphone.
I turned icloud off an on, reset the apps, even deleted them and reinstalled them. I also checked all of the other icloud setting.
Only thing that worked (and it might be just a fluke) I emailed from my iphone a numbers document to my ipad. I opened then closed the document and the app. When I opened it back up it started importing my icloud documents.
If it is a settings issue then you need to be sure you have icloud setup in your mail settings. Has to be there and active.

My iPod classic wont connect to the computer. The light comes on but it doesn't even come up with 'connected' screen. Have tried everything on apple troubleshoot but hasn't helped. Still works in Logitech iPod player. Any suggestions please???

My iPod classic wont connect to the computer. The light comes on but it doesn't even come up with 'connected' screen on the ipod. Have tried different computers, usb cables and ports, as well as restarting computer, updating itunes, and rebooting ipod. Still works in Logitech iPod player, however it has just wiped itself of all songs so at the moment I'm stuck with a useless iPod. Any suggestions please???

If you happen to have a USB docking cable that is new (or close to being new), try using that one. If the cause is the dock connector on the iPod becoming worn, if you try it with a cable that is not worn, it's possible that it may connect for data.
I believe the dock connector is internally part of the logic board, so it may not be economical to have a repair shop (including Apple Store Genius Bar) do the repair. You'll need to ask for pricing.
If you are good at such things, this web site has DIY repair guides
http://www.ifixit.com/Device/iPod_Original
If it's the most recent iPod classic, it appears to be quite difficult to pry open. I have an older 4th gen (and 3rd gen) "classic" iPod, and those are fairly eash to pry open, using the plastic tools.

HT5129 I have multiple iPhoto albums, so this move is pushing thousands of pictures to each library. Wh doesn't this come with a "No, Thanks!" option since I've ALREADY ensured the MobileMe albums were captured? I've never seen Apple force an action like

I have multiple iPhoto albums, so this move is pushing thousands of pictures to each library. Why doesn't this come with a "No, Thanks!" option since I've ALREADY ensured the MobileMe albums were captured? I've never seen Apple force an action like this!
Worse - According to http://support.apple.com/kb/TS4328, "photos you published to MobileMe from your library may be moved from their original events into a new event called "From MobileMe"." - so the forced move has probably scrambled my events in every library. The 'fix'? Search for matching photos and if not found, copy and paste into the desired event. It will take DAYS for me to recover from this undesired and ill-considered forced action.

Load your backup from just before this and when you launch iPhoto click on learn more. Go back to iPhoto and in the iPhoto preferences remove all references to MM and do likewise in the system preferences
LN

Several mysterious problems with Solaris 11 x86 install

Hi folks,
I've recently installed Solaris 11 x86 as a replacement for Solaris 9 SPARC on an Ultra 2 machine. I like the operating system, but I've promptly acquired some mysterious problems. The computer is a Fujitsu Siemens Esprimo E2500 with a Pentium 4 HT 3.06 GHz processor, 2 GB RAM, an 80 GB SATA disk and a 147 GB SCSI disk.
I have had a few occasions on which the screen goes totally blank, the monitor claims that there is no signal, and I have to restart the machine. However, with the blank screen, the hard drive activity light is sometimes still flashing. This happens predictably when I try to log off (as opposed to shutting down) and when I use Totem media player and click on anything inside the Totem window. The motherboard has built-in graphics and brief specifications can be found here:
http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRIMO/Datasheets/ds_esprimo_edition_e2500.pdf
Yesterday my PS/2 keyboard started causing the motherboard to beep crazily when I use it. It beeps rapidly 4 times, then prints the expected character. However, the problem doesn't occur at the initial log in screen. The mouse cursor has also gone beserk on one occasion, flying all over the screen (I had this problem with a previous PC, but a different OS, and thought it was a hardware fault, which I why I got this new computer). With the keyboard problem, the machine is basically unusable. However, it is configured as a dual boot machine, and the keyboard problem isn't present with Windows XP.
There are also a few smaller, odd problems. Occasionally all the icons vanish from my Gnome desktop. The command prompt also mysteriously changed from $chris@pluto to $bash-4.1 just before the keyboard problem appeared, although that might have had something to do with me copying my home directory to a different disk and editing the /etc/auto_home file (moving the home directory worked fine). Also, unlike with Solaris 9 SPARC, I find that I have to have external SCSI devices switched on at boot time, should I want to use them later. That's a pain. With Solaris 9, I could run "boot -r" when I first attached the device, then switch on the SCSI devices and mount them whenever I wanted.
After the useful advice I received here about "more" and "less", I thought I'd post these problems and see if anyone can help. I'd really appreciate some advice. Can anyone identify likely causes for these problems? Which problems can I expect to solve and which do I have to live with?
Many thanks,
Chris Tidy
Edited by: Chris Tidy on 23-Mar-2012 03:36

Hi folks,
I've recently installed Solaris 11 x86 as a replacement for Solaris 9 SPARC on an Ultra 2 machine. I like the operating system, but I've promptly acquired some mysterious problems. The computer is a Fujitsu Siemens Esprimo E2500 with a Pentium 4 HT 3.06 GHz processor, 2 GB RAM, an 80 GB SATA disk and a 147 GB SCSI disk.
I have had a few occasions on which the screen goes totally blank, the monitor claims that there is no signal, and I have to restart the machine. However, with the blank screen, the hard drive activity light is sometimes still flashing. This happens predictably when I try to log off (as opposed to shutting down) and when I use Totem media player and click on anything inside the Totem window. The motherboard has built-in graphics and brief specifications can be found here:
http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRIMO/Datasheets/ds_esprimo_edition_e2500.pdf
Yesterday my PS/2 keyboard started causing the motherboard to beep crazily when I use it. It beeps rapidly 4 times, then prints the expected character. However, the problem doesn't occur at the initial log in screen. The mouse cursor has also gone beserk on one occasion, flying all over the screen (I had this problem with a previous PC, but a different OS, and thought it was a hardware fault, which I why I got this new computer). With the keyboard problem, the machine is basically unusable. However, it is configured as a dual boot machine, and the keyboard problem isn't present with Windows XP.
There are also a few smaller, odd problems. Occasionally all the icons vanish from my Gnome desktop. The command prompt also mysteriously changed from $chris@pluto to $bash-4.1 just before the keyboard problem appeared, although that might have had something to do with me copying my home directory to a different disk and editing the /etc/auto_home file (moving the home directory worked fine). Also, unlike with Solaris 9 SPARC, I find that I have to have external SCSI devices switched on at boot time, should I want to use them later. That's a pain. With Solaris 9, I could run "boot -r" when I first attached the device, then switch on the SCSI devices and mount them whenever I wanted.
After the useful advice I received here about "more" and "less", I thought I'd post these problems and see if anyone can help. I'd really appreciate some advice. Can anyone identify likely causes for these problems? Which problems can I expect to solve and which do I have to live with?
Many thanks,
Chris Tidy
Edited by: Chris Tidy on 23-Mar-2012 03:36

Sun DS 5.2 p3 with Solaris 10

I've been trying to test out using LDAP to replace NIS.
My setup is a Sun Sparc box with Solaris 10 running
Sun One Directory 5.2 patch level 3. I have two x86_64 client
machines; one running Red Hat 4 and the other Solaris 10.
I have been able to authenticate on the RH 4 machine
with no problems, but have been unable to on the
Solaris 10 machine. I'm using Sun's native LDAP
client tools.
I've tried configuring the DS for anonymous access
to proxy access with simple authentication, but neither
one seems to matter.
I've copied over the pam.conf example provided by Sun
today, but it still doesn't seem to work. I can do a
"getent passwd" on the RH 4 and get all the local accounts
and the test one in the LDAP server. If I try that on the
Sun box I only get the local accounts, however if I
do a "getent password testuser" on the Solaris 10 box,
then I get the right account info. It looks like I can even
see the passwords, which are stored using md5; not
crypt, if that matters.
I'm tried searching for more info, but it doesn't appear
that DS 5.2 has been used too much on Solaris 10;
nor does Gary Tay's great documentation cover
Solaris 10. Is there something obvious I'm missing?
I can't believe it would be this hard to set LDAP up
with just Sun software.

See related posts:
http://www.sunmanagers.org/pipermail/summaries/2005-August/006688.html
1) make sure /etc/nsswitch.conf has this entry in it:
ipnodes: files
2) must run these commands as root:
crle -u -s /usr/lib/mps
crle -64 -u -s /usr/lib/mps/64
Other than that I didn't need to do anything different than solaris 9.
I did have to run this command on occasion though:
svcadm enable svc:/network/ldap/client:defaulthttp://forum.sun.com/thread.jspa?forumID=271&threadID=25523
Gary

Solaris 8 client setup with solaris 9 ldap

I have managed to install iplanet directory server 5.1 that comes with solaris 9 using the utility idsconfig. As far as i can tell, all went well. Now i'm trying to initialize a solaris 8 client to authenticate to the iDS 5.1 on my solaris 9 box. What do i have to do on the solaris 8 client to "initialize it"? I've tried using ldapclient on the solaris 8 client as follows:
# ldapclient -v -P default x.x.x.x
but i keep getting the following errors:
findDN rename(/var/ldap/ldap_client_file.orig, /var/ldap/ldap_client_file) failed!
findDN rename(/var/ldap/ldap_client_cred.orig, /var/ldap/ldap_client_cred) failed!
There are no files in /var/ldap. I thought that one uses ldapclient to create them. Am i wrong?
Also, the output from idsconfig says that a 'NisDomainObject' was added to my domain but looking at the object classes in iDS5.1, there is no nisdomainobject.
I also noticed that when i run the command domain on my solaris 8 box, there's no output. Do i need to set the domain on my solaris 8 client? I have the domain defined in /etc/resolv.conf.
Stewart

hi Stewart,
You may find what you are looking for in the following technical note: http://knowledgebase.iplanet.com/ikb/kb/articles/7966.html
It is called: "Cookbook for Solaris 8 client with Directory Server 5.1/Solaris 9" :-)
Hope this will help you.
Cheers / Damien.

Smbmount with solaris 10

I want to mount an ntfs share.
in solaris 10 :
a) mount -F smbfs gives an error (smbfs doesn't seems to be known)
b) I didn't find the command smbmount under /usr/sfw
any idea or answer ?
Thanks

smbmount is not available with Solaris (or any OS other than Linux). I use Sharity light (free) at
http://www.obdev.at/products/sharity-light/
See my FAQ for details and other alternatives
http://sun.drydog.com/faq/9.html

Why is everything so difficult since 'upgrading' to Maverick. I can't sync my Outlook calendar (default) with iCal or my iPad.

Why is everything so difficult since 'upgrading' to Maverick. I can't sync my Outlook calendar (default) with iCal or my iPad.
Also, I can't send pictures via Dropbox any more. Two basic necessities that I just can't get to work.

Microsoft didn't update Outlook to be Mavericks ready.
I don't really use Dropbox, but if their software doesn't work like it used to, they didn't update it for Mavericks.
EDIT: http://www.iclarified.com/34312/dropbox-24-released-for-mac-os-x-brings-maverick s-support-iphoto-importer-more

Doesn't gcc come by default with Solaris 10?

Similar Messages

Maybe you are looking for